- dovecot - dovecot.org

[Dovecot] Default fallback behaviour
by Nikita Koshikov 27 Nov '12

27 Nov '12

Hello list, Here is the problem: I have few: passdb { #1 } passdb { #2 } And relative userdb sections. If user not found in 1) section it fallbacks to next one - it's expected and right, IMHO. But when the user exists in both section and password verification fails on 1) database it successfully authenticated on next one. I think this behaviour should be configured. The main goal of 1) section for this server is to overwrite users in main (section2) database. Maybe I missed something and this option is already in dovecot code and I can't find it ? Or if not - will it be added in the future ? Dovecot version 2.1.10.

3 6

[Dovecot] lmtp_rcpt_check_quota working somewhere?
by Steffen Kaiser 27 Nov '12

27 Nov '12

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hello, I'm running Dovecot v2.1 and enabled the lmtp_rcpt_check_quota option in conf.d/20-lmtp.conf, because I just found it in the sample config. Is this option working somewhere? When I have the option enabled, I get _no_ response in the RCPT TO phase, if the user is under quota. If I go on and enter the DATA keyword eventually, I get "554 5.5.1 No valid recipients", so it looks like, the user is really ignored at all. For an user over quota, I get: 552 5.2.2 <user> Quota exceeded (mailbox for user is full) Without lmtp_rcpt_check_quota LMTP works fine. For the user over quota I get the error after DATA phase, the user under quota gets the message delivered. Regards, - -- Steffen Kaiser -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.11 (GNU/Linux) iQEVAwUBULOTyWoxLS8a3A9mAQITfggAoC0ujUXE53ePUEsTUHXlL2S0/hQCdAgA ppZnUPv9Gjh2oZjjrOmPa+zYVnd+6xK9m58bV4b7FPC+uz1otaS205WMIeZCuy5l kTtCpNpxxNfsUDzMM8zrRf+AZODAwUzwx7yknGdpXtezIGYg7kTKIXxs3KShgI3i ML/kbj4j+YkpdR0wUnZCIVM7MBukAJ3rhSqvfcY0ekZo8+ownqVjCE1PLhFy6oGE OsN8qY272nuvY9dLjflUjOKsvPVnviIu0kgRAZEsqPPp27Jp4GMsSpqqdAhjgbzH D8n9AnxVc6KYhq8qVpsWBCNy3/CwERsadZcRnl/4zcZmq19VsLLZMQ== =Nyqj -----END PGP SIGNATURE-----

2 2

[Dovecot] Feature request: add information to error message: client doesn't have lookup permissions for this user: userdb reply doesn't contain uid (change userdb socket permissions)
by Steffen Kaiser 27 Nov '12

27 Nov '12

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Please add the information to this error, which socket has the problem and which uid access is and what is expected. For instance, when the quota dict request fails, because of permission problems, you get a very detailed info about the current problem. And, further more, hints to solve it. BTW: I'm trying to configure shared mailboxes for a virtual user system, when one user with ACLs on other mailboxes requests a LIST, I get this error. In my case, I solved the problem by chmod u+x auth-userdb . Kind regards, - -- Steffen Kaiser -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.11 (GNU/Linux) iQEVAwUBUJPs/2oxLS8a3A9mAQLQxwf/ZkhmER1q/+rlZCIdQ70x6TDwS1nwJI6J FHyr8UFgV0xXBeX8OW+UDl8N4OzXOiReygHnrcpYE4BCEQmeQC9YUU7mCcC6tpqG cg+uYMAPap3Zx8WkAqsmDnnqHe4xX7GUscoiVh1vxYdiRkHwikiKEfuve+SwTpyj wmAK5CMGLBifWPk6bmFP7YR+sJnG/E1vKxEUMEKEKjMfubsCCqc95NNCOiVTwCTG Y15eIhyJTBBjrGuLSeiHb40sPnOE/OgO9r00+OXrZOtuouYZlsMENsDXSFFLoC7v MpABu57w3GRC0p33bjSuX8ZGinEd8fFz9mbUCSvBmLLL7rOZVR6FDw== =Rf46 -----END PGP SIGNATURE-----

2 2

[Dovecot] Rebuilding indexes fails on inconsistent mdbox
by Milan Holzäpfel 27 Nov '12

27 Nov '12

Hello all, I have a problem with an incosistent mdbox: Oct 24 10:43:23 two dovecot: imap-login: Login: user=<...>, method=PLAIN, rip=..., lip=..., mpid=4977, TLS Oct 24 10:43:23 two dovecot: imap(listen(a)mjh.name): Error: mdbox map .../mdbox/storage/dovecot.map.index corrupted: Unexpectedly lost INBOX uid=638 map_uid=809891 Oct 24 10:43:23 two dovecot: imap(listen(a)mjh.name): Error: mdbox map .../mdbox/storage/dovecot.map.index corrupted: Unexpectedly lost INBOX uid=638 map_uid=809891 Oct 24 10:43:23 two dovecot: imap(listen(a)mjh.name): Disconnected: Internal error occurred. Refer to server log for more information. [2012-10-24 10:43:23] bytes=115/53726 Oct 24 10:43:23 two dovecot: imap(listen(a)mjh.name): Warning: mdbox .../mdbox/storage: Inconsistency in map index (467,31960 != 467,36768) Oct 24 10:43:23 two dovecot: imap(listen(a)mjh.name): Warning: mdbox .../mdbox/storage: rebuilding indexes Oct 24 10:45:19 two dovecot: imap(listen(a)mjh.name): Panic: file mdbox-storage-rebuild.c: line 773 (rebuild_update_refcounts): assertion failed: (map_uid < msgs[i]->map_uid) Oct 24 10:45:19 two dovecot: imap(listen(a)mjh.name): Error: Raw backtrace: /usr/lib/dovecot/libdovecot.so.0(+0x380ca) [0x7f99cf35b0ca] -> /usr/lib/dovecot/libdovecot.so.0(+0x3810e) [0x7f99cf35b10e] -> /usr/li b/dovecot/libdovecot.so.0(i_fatal+0) [0x7f99cf334a67] -> /usr/lib/dovecot/libdovecot-storage.so.0(mdbox_storage_rebuild_in_context+0x10a5) [0x7f99cf5f42d5] -> /usr/lib/dovecot/libdovecot-storage.so.0(mdbox_s torage_rebuild+0x24) [0x7f99cf5f4414] -> /usr/lib/dovecot/libdovecot-storage.so.0(+0x53565) [0x7f99cf5f4565] -> /usr/lib/dovecot/libdovecot-storage.so.0(mailbox_close+0x1a) [0x7f99cf5c8caa] -> /usr/lib/dovec ot/libdovecot-storage.so.0(mailbox_free+0x13) [0x7f99cf5c8cf3] -> dovecot/imap(client_destroy+0x109) [0x7f99cfaa69e9] -> dovecot/imap(client_input+0xaa) [0x7f99cfaa6dba] -> /usr/lib/dovecot/libdovecot.so.0(i o_loop_call_io+0x48) [0x7f99cf366c98] -> /usr/lib/dovecot/libdovecot.so.0(io_loop_handler_run+0xa7) [0x7f99cf367d27] -> /usr/lib/dovecot/libdovecot.so.0(io_loop_run+0x28) [0x7f99cf366c28] -> /usr/lib/dovecot /libdovecot.so.0(master_service_run+0x13) [0x7f99cf354e33] -> dovecot/imap(main+0x304) [0x7f99cfa9e554] -> /lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0xed) [0x7f99cef8576d] -> dovecot/imap(+0x95e5) [0 x7f99cfa9e5e5] Oct 24 10:45:19 two dovecot: master: Error: service(imap): child 4977 killed with signal 6 (core dumps disabled) I use: Dovecot 2.0.19-0ubuntu1 Ubuntu 12.04, x86-64, Kernel 3.2.0-32-generic local XFS filesystem for the mdbox The problem appeared out of nowhere. Many messages been continously delivered to this mailbox on this installation since May 2012, and the mdbox was only accessed with deliver and imap/pop3 from dovecot. About four hours after the problem initially appeared, I did a hard reset of the system because it was unresponsive. The error message is exactly the same before and after the hard reset. The problem is triggered by both IMAP access and dovecot deliver access. The whole mdbox is 6.6 GiB large and I guess that it contains about 300k-600k messages. It's an archive of public mailing lists, so I could give access to the files. Can anybody say something about this? May the mdbox be repaired? Regards, Milan Holzäpfel -- Milan Holzäpfel <listen(a)mjh.name>

5 15

[Dovecot] Dovecot IMAP/POP3 auto creating maildir
by Dominic Malolepszy 27 Nov '12

27 Nov '12

Hi I have observed that after deleting a mailbox and removing the user from the userdb, immediately accessing the mail account via POP3/IMAP causes Dovecot to auto create an empty mailbox, because the userdb/passdb details are still cached for 10minutes. Is there any option to tell Dovecot POP3/IMAP not to auto create the mailbox if it does not exist? Alternatively and less desirably is there a mechanism for telling Dovecot to expire a userdb/passdb cached entry? Running Dovecot 2.1.9 Dominic

2 1

[Dovecot] memory allocation issues
by Kelsey Cummings 27 Nov '12

27 Nov '12

One of our dovecot backend servers ran into a problem with it's auth process a few days ago. This doesn't appear to be the error logged when dovecot hits its internal limit so I'm not sure what is going on here. auth: Error: malloc: 58012: Cannot allocate memory auth: Error: Unable to allocate memory for mutexes from the region auth: Error: PANIC: Cannot allocate memory auth: passwd(test,1.1.1.1,<8HTlNHzNIQBAjhKC>): unknown user pop3: Error: Authenticated user not found from userdb, auth lookup +id=2509111297 (client-pid=4781 client-id=1) pop3-login: Internal login failure (pid=4781 id=1) (internal failure, 1 +succesful auths): user=<test>... There was at least 10+GB free RAM on the server and no indication of a system level issue at the same time. The server is running 2.1.9. There were about 3,200 active sessions, with something like 12 new sessions/sec. The other identical servers are/were handling virtually identical load with the same service uptime and haven't had any issues so far. (Crash happened 7 days ago.) -- Kelsey Cummings - kgc(a)corp.sonic.net sonic.net, inc. System Architect 2260 Apollo Way 707.522.1000 Santa Rosa, CA 95407

2 4

[Dovecot] fs_flush_file_handle_cache_dir: rmdir(/var/mail) AGAIN
by Ken Mandelberg 27 Nov '12

27 Nov '12

We are running Dovecot 2.0.12. It runs on only one server and /var/mail is local where all the INBOX's are stored. Users other IMAP folders are NFS mounted on the server. We see frequent Error: nfs_flush_file_handle_cache_dir: rmdir(/var/mail) failed: Device busy I know this error message has been around a long time. Should we still be seeing it on 2.0.12 with a local /var/mail. Perhaps the message is misleading and really complaining about folders other than INBOX that are NFS mounted. Our config has dovecot.conf:mail_nfs_index = no dovecot.conf:mail_nfs_storage = yes is that correct given the above? Also, does the flush error messages have any real consequences? My understanding is that the rmdir is meant to fail, just to force a flush.

2 1

[Dovecot] Filesystem quotas
by Andreas Kasenides 27 Nov '12

27 Nov '12

I could not determine if when using filesystem quotas (http://wiki2.dovecot.org/Quota/FS) Dovecot will use the reported quota and limits without the need of configuring them via "quota_rules". Is this possible somehow? Such a feature would determine the quota limits automatically from the filesystem quotas thereby allowing to make use of them in quota warnings. Dovecot already knows the quota settings and limits. Here is evidence from the logs > Nov 21 19:24:22 iolaos dovecot: imap(user): Debug: box=/Mail/ank > mount=/newmail match=yes > Nov 21 19:24:22 iolaos dovecot: imap(user): Debug: quota-fs: > host=xxxx.xxxx.ucy.xx.cy, path=/mail, uid=211, bytes > Nov 21 19:24:22 iolaos dovecot: imap(user): Debug: quota-fs: uid=211, > value=2779115520, limit=8388608000 I am using (testing) version 2.2alpha1. Thankx. -- Andreas Kasenides Senior IT Officer University of Cyprus, Dept. of Computer Science Tel: 22892714, Fax: 22892701

2 1

[Dovecot] Plugin help, number of messages in mailbox
by Richard Platel 27 Nov '12

27 Nov '12

Hi, We use Dovecot for IMAP and POP (but not LDA), we want to do something when a user has an INBOX that becomes empty, or becomes not empty (set a flag in memcached, but that's not really important). I'm writing a plugin (for Dovecot 2.1.7). On mailbox_open() I can use mailbox_get_status() to get a count of messages in the mailbox, and then decrement this in expunge() or increment it in mailbox save_finish() (for IMAP APPEND or COPY commands). However in expunge() and mailbox_save_finish, even after calling the super function, mailbox_get_status doesn't update the number of messages in the mailbox. This is a problem if (for example) there are concurrent POP sessions. Two POP sessions could get all the messages in INBOX, one could logout, calling expunge a few times, eventually causing my plugin to note that the inbox is empty, then our LDA could deliver a message, mark the INBOX not empty, then the other POP session could log out, call expunge and cause my plugin to mark the INBOX empty, when it's not. So in summation: how can a plugin be notified of changes to a mailbox, and then accurately get the real number of messages in that mailbox?

2 1

[Dovecot] Folder layout after Cyrus to Dovecot migration
by Keith Edmunds 27 Nov '12

27 Nov '12

# dovecot --version 1.2.15 We're trying to migrate a server from Cyrus to Dovecot, and we're mostly there. On Cyrus, the folder layout in the MUA is: INBOX subfolder subfolder ... Sent Drafts Queue Trash Users cannot create sibling folders to the Inbox, only subfolders (and sub-subfolders, etc). We've replicated that with: -------------------------------------------------------------------------------- mail_location = maildir:/shared/imapmail/users/%u:INBOX=/shared/imapmail/users/%u:LAYOUT=fs namespace private { separator = / prefix = "INBOX/" inbox = yes } -------------------------------------------------------------------------------- ...however, the Sent/Drafts/Queue/Trash folders are now subfolders of Inbox. Cyrus seems to default to the above layout (at least, I can't find anywhere that defines it). There are no special settings in the MUA to achieve the abovev. Is there a way of replicating the above within Dovecot? We can probably go to V2 if we have to, but 1.2.15 would be preferable. Thanks, Keith

3 5

[Dovecot] cannot update mailbox - unable to lock for exclusive access
by 1st WebDesigns 27 Nov '12

27 Nov '12

Hi there, We're using Dovecot version 1.0.7 and Postfix, and since upgrading our Linux box we're getting this in the maillog: Nov 8 07:49:11 server1 postfix/local[27901]: 04B8E7081DA: to=<xyz(a)xyz.com>, orig_to=<abc(a)abc.com>, relay=local, delay=19, delays=0.07/0/0/19, dsn=4.2.0, status=deferred (cannot update mailbox /var/spool/mail/abc for user abc. unable to lock for exclusive access: Resource temporarily unavailable) Postfix is currently set to: mailbox_delivery_lock = fcntl, dotlock Dovecot has this: mbox_read_locks = fcntl mbox_write_locks = fcntl dotlock I've scoured the web and tried all kinds of different locking mechanisms and combinations to no avail. The mail is eventually delivered but on a busy day this can take several hours. In the evening it generally doesn't happen, which leads me to believe it occurs during the day when people have their mail clients open. However, this particular issue doesn't affect every user that has their mail client open, only some! We currently have the mailboxes in mbox format - yes I know we should upgrade to maildir which we will eventually, however we've been using mbox for the last 10 years and this has only become an issue since upgrading. What I have discovered this morning is a Dovecot connection that is open for 6 minutes before disconnection. During this 6 minutes the above problem occurs (new mail cannot get an exclusive lock). The same user will have connected and disconnected several times before and after, with a connection taking no more than a few seconds. But it seems sometimes the connection is taking longer than it should and I suspect the problem lies here. Please can anyone help! Thank you, G

3 15

[Dovecot] sieve + dkim
by Николай Клименко 26 Nov '12

26 Nov '12

message sent from the sieve-vacation does not contain dkim signature how to configure sieve to send messages via smtp transport with signing?

3 4

[Dovecot] IMAP proxy - can it detect parodying to itself?
by Graham Leggett 26 Nov '12

26 Nov '12

Hi all, I have some IMAP servers fronted with separate perdition processes, and it would be ideal if I could collapse this down to having dovecot do both the IMAP proxying and the IMAP serving at the same time on the same IP addresses. One of the fields in my LDAP entries contains the canonical name of the server that hosts their mailbox, and if I follow the manual at http://wiki2.dovecot.org/PasswordDatabase/ExtraFields#LDAP I could add the host field to enable proxying. My question is whether dovecot has the ability to notice whether dovecot is being asked to proxy to itself, in other words the value of "host" is the current dovecot server, and when this happens, ignore the proxy and just be a straight IMAP server, because the user has connected to the right box already. Is this possible? Regards, Graham --

2 2

Re: [Dovecot] doveadm fails with passdb authentication binds (dovecot 2.0.16)
by mailing lists 26 Nov '12

26 Nov '12

Hello, >> # doveadm mailbox list -u user001 >> doveadm(user001): Error: user user001: Auth PASS lookup failed >> doveadm(user001): Fatal: passdb lookup failed > Are you running this on a Dovecot proxy? It looks like doveadm wants to do a passdb lookup to find out which server should handle this user. Passdb lookups don't work with LDAP binding. But if everything else works then I think you simply shouldn't have enabled doveadm proxying. So, set doveadm_proxy_port back to 0? thank you Timo, setting doveadm_proxy_port to 0 did the trick.

1 0

[Dovecot] Missing Messages on IOS device
by David Morsberger 26 Nov '12

26 Nov '12

I just converted my old server running UW/Panda to a Mac Mini Server running Mountain Lion (ML) Server. I'm using the postfix / dovecot setup provided by Apple. My IMAP clients are not showing all my emails. The Mail App on my iPhone and iPad is behaving the worse. I can see the emails that are not showing up in the cur directory. The ML Mail App is stating there are 3854 emails in my INBOX. There are 3948 files in the 'cur' directory ('ls cur | wc -l' returns 3948). Other mailboxes and directories have the same behavior. I'm not sure what to expect here. My method of conversion was to bulk copy (drag and drop) all the messages from one the UW server to the Dovecot server using the Apple Desktop Mail App in Mountain Lion. Any idea why these messages are not showing up on my devices and how I can get them to show up? bash-3.2# /Applications/Server.app/Contents/ServerRoot/usr/sbin/dovecotd --version 2.0.19apple1 bash-3.2# /Applications/Server.app/Contents/ServerRoot/usr/sbin/dovecotd -n # 2.0.19apple1: /Library/Server/Mail/Config/dovecot/dovecot.conf # OS: Darwin 12.2.1 x86_64 hfs aps_topic = com.apple.mail.XServer.fc3bb7c3-c8ef-4fe2-aff3-95ecd927fb11 auth_mechanisms = cram-md5 x-plain-submit plain login apop digest-md5 auth_socket_path = /var/run/dovecot/auth-userdb auth_username_format = %n default_internal_user = _dovecot default_login_user = _dovenull disable_plaintext_auth = no first_valid_gid = 6 first_valid_uid = 6 mail_access_groups = mail mail_location = maildir:/Library/Server/Mail/Data/mail/%u mail_log_prefix = "%s(pid %p user %u): " mail_plugins = quota zlib fts fts_sk managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date ihave mdbox_rotate_size = 200 M passdb { args = /Library/Server/Mail/Config/dovecot/submit.passdb driver = passwd-file pass = yes submit = yes } passdb { driver = od } plugin { fts = sk quota = maildir:User quota quota_warning = storage=100%% quota-exceeded %u sieve = /Library/Server/Mail/Data/rules/%u/dovecot.sieve sieve_dir = /Library/Server/Mail/Data/rules/%u } postmaster_address = postmaster(a)mini.mmpcrofton.com protocols = imap pop3 lmtp sieve quota_full_tempfail = yes service auth { extra_groups = _keytabusers idle_kill = 15 mins unix_listener auth-userdb { user = _dovecot } } service dns_client { unix_listener dns-client { mode = 0600 } } service imap-login { inet_listener imap { port = 143 } inet_listener imaps { port = 993 ssl = yes } service_count = 0 } service imap { client_limit = 5 process_limit = 200 service_count = 0 } service lmtp { unix_listener lmtp { mode = 0600 } } service managesieve-login { inet_listener sieve { port = 4190 } } service pop3-login { inet_listener pop3 { port = 110 } inet_listener pop3s { port = 995 ssl = yes } } service pop3 { client_limit = 5 process_limit = 200 service_count = 0 } service quota-exceeded { executable = script /Applications/Server.app/Contents/ServerRoot/usr/libexec/dovecot/quota-exceeded.sh unix_listener quota-exceeded { group = mail mode = 0660 user = _dovecot } user = _dovecot } service quota-warning { executable = script /Applications/Server.app/Contents/ServerRoot/usr/libexec/dovecot/quota-warning.sh unix_listener quota-warning { group = mail mode = 0660 user = _dovecot } user = _dovecot } ssl_ca = </etc/certificates/*.chain.pem ssl_cert = </etc/certificates/*.cert.pem ssl_cipher_list = ALL:!LOW:!SSLv2:!EXP:!aNULL:!ADH:!eNULL ssl_key = </etc/certificates/*.key.pem ssl_key_path = /etc/certificates/*.key.pem syslog_facility = local6 userdb { args = partition=/Library/Server/Mail/Config/dovecot/partition_map.conf enforce_quotas=no driver = od } verbose_proctitle = yes protocol lmtp { mail_plugins = quota zlib fts fts_sk sieve push_notify } protocol lda { mail_plugins = quota zlib fts fts_sk sieve push_notify } protocol imap { imap_id_log = * imap_id_send = "name" * "version" * mail_max_userip_connections = 20 mail_plugins = quota zlib fts fts_sk imap_quota imap_zlib imap_fts urlauth } protocol pop3 { mail_max_userip_connections = 6 }

1 0

[Dovecot] sieve-extprograms strips Return-Path headers
by Ben Morrow 25 Nov '12

25 Nov '12

The sieve-extprograms extension strips Return-Path headers before passing mail off to the external program. The patch to remove this behavious is trivial (and attached), but since it appears to be deliberate I felt I should investigate further. I believe this is basically a cut-and-paste error. The code to strip Return-Path has been there since the sieve-pipe plugin for Dovecot 1.x, and I believe it was copied from the equivalent code in the 'redirect' action for passing mail off to sendmail(8). In that case, stripping Return-Path is correct, since the message is being resubmitted for delivery (by SMTP or otherwise), and the last step of the new delivery will (should) add a new Return-Path header with the new envelope information. In the case of sieve-extprograms, though, the filtering is happening post-delivery, so a stripped Return-Path will never be replaced. Ben

2 1

[Dovecot] SSL certificates
by The Doctor 24 Nov '12

24 Nov '12

Who is the best CA Certificate provider for Dovecot? -- Member - Liberal International This is doctor(a)nl2k.ab.ca Ici doctor(a)nl2k.ab.ca God,Queen and country!Never Satan President Republic!Beware AntiChrist rising! http://www.fullyfollow.me/rootnl2k Merry Christmas 2012 and Happy New Year 2013 -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean.

3 2

[Dovecot] dovecot trying to update my sieve directory
by Mathieu R. 23 Nov '12

23 Nov '12

Hello, i got an error in maillog, dovecot trying tu update my sieve directory : 2012-11-23T11:01:33.943047+00:00 localhost dovecot: imap(mathieu(a)400iso.net): Error: stat(/srv/vmail/400iso.net/mathieu@400iso.net/.dovecot.sieve/tmp) failed: Not a directory this cause no problem but i probably misconfigured something... here is my dovecot.conf : protocols = imap pop3 sieve mail_home = /srv/vmail/%d/%u mail_location = maildir:~ mail_plugins = $mail_plugins quota ssl_cert = </etc/ssl/private/server.crt ssl_key = </etc/ssl/private/server.key service auth { unix_listener auth-client { group = postfix mode = 0660 user = postfix } user = root } passdb { args = /etc/dovecot/dovecot-sql.conf driver = sql } userdb { args = /etc/dovecot/dovecot-sql.conf driver = sql } protocol lda { mail_plugins = $mail_plugins sieve postmaster_address = postmaster(a)400iso.net hostname = 400iso.net } managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date ihave plugin { sieve = ~/.dovecot.sieve sieve_dir = ~/sieve # sieve_global_dir = /srv/vmail/sieve/ quota = fs:vm quota quota_rule = *:storage=5G } protocol imap { mail_plugins = $mail_plugins imap_quota } -- Mathieu Rousseau http://400iso.net/

2 4

[Dovecot] Proxy to join two accounts
by Tomek 23 Nov '12

23 Nov '12

Hello, I have server with IMAP on dovecot for user mails and second server on archiveopteryx as mail archive. I'm wondering if it's possible to make some sort of proxy to these two servers in way where: - dovecot server will be main IMAP service with INBOX, etc - I want archiveopteryx account to be something like shared folder with read only access (no delete, no move, etc) in path ex. /archive/user.name - this proxy mappings should allow adding few archive accounts to one user (in case of people replacement) + it will be cool if this mappings could be defined in database so I could write tools to manage archive access for bosses. Is such case possible to achieve with dovecot (any howto or example would be very helpful)? If not - do you know any proxy tools that could allow such configuration? Thanks for any help. Regards, Tomek.

2 2

[Dovecot] v2.1.10: Director director_servers order issue
by Bertrand Jacquin 23 Nov '12

23 Nov '12

Hi, I'm setting up an IMAP/POP cluster using dovecot director for some NFS reasons and I'm getting some troubles with director_servers directive. Configuration is shared on both nodes : director_servers = 10.0.50.50 10.0.50.51 director_mail_servers = 192.168.0.150 192.168.0.151 director_user_expire = 15 min service director { unix_listener login/director { mode = 0666 } fifo_listener login/proxy-notify { mode = 0600 user = $default_login_user } unix_listener director-userdb { mode = 0600 } inet_listener { port = 9090 } } service ipc { unix_listener ipc { user = $default_login_user } } Here 10.0.50.50 is node1, 10.0.50.51 is node2 # ring status on node1 director ip port type last failed 10.0.50.50 9090 self never 10.0.50.51 9090 never # ring status on node2 director ip port type last failed 10.0.50.50 9090 self never 10.0.50.51 9090 never self is the same on both nodes, and that generate some cases that can be observed on logs : # logs on node1 dovecot: director: Error: Remote director thinks it's someone else (connected to 10.0.50.51:9090, remote says it's 10.0.50.50:9090) And this is true, TCP packet contain bad DATA : # tcpdump -i eth0 -nn src host 10.0.50.51 and port 9090 -s 0 -w - -l | strings | egrep '^ME' ME 10.0.50.50 9090 # logs on node2 dovecot: director: Error: connect(10.0.50.51:9090) failed: Invalid argument Invalid argument is present as bind() is not done with the appropriate IP : # strace -p 6063 -fF -s 1024 -e trace=bind,connect bind(28, {sa_family=AF_INET, sin_port=htons(0), sin_addr=inet_addr("10.0.50.50")}, 16) = 0 connect(28, {sa_family=AF_INET, sin_port=htons(9090), sin_addr=inet_addr("10.0.50.51")}, 16) = -1 EINVAL (Invalid argument) Also, during this time, CPU is ~100% used. bind() is done with node1 IP address. I also tested using a DNS : director_servers = director-all director-all is two A entries, first containing 10.0.50.50, second 10.0.50.51 and the result here is exactly the same. Using two configurations : # director_servers on node1 director_servers = 10.0.50.50 10.0.50.51 # director_servers on node2 director_servers = 10.0.50.51 10.0.50.50 Give the same result as showed before : # ring status on node1 director ip port type last failed 10.0.50.50 9090 self never 10.0.50.51 9090 never # ring status on node2 director ip port type last failed 10.0.50.50 9090 self never 10.0.50.51 9090 never It seems that first sorted entry in director_servers is considered as "self". I'm using dovecot 2.1.10-0~auto+55 debian package from rename-it repository. Thanks for your help. -- Beber

2 3

[Dovecot] doveadm fails with passdb authentication binds (dovecot 2.0.16)
by mailing lists 23 Nov '12

23 Nov '12

Hello, I'm testing passdb auth binds with dovecot 2.0.16, but for some reason dovedm fails to work with the configuration showed below. The network trace shows the successful bind for the administrative user (uid=mailapp), but nothing for the mail user (uid=user001). what am i missing here? # doveadm mailbox list -u user001 doveadm(user001): Error: user user001: Auth PASS lookup failed doveadm(user001): Fatal: passdb lookup failed 10-auth.conf: ==================== disable_plaintext_auth = no auth_cache_size = 0 auth_cache_ttl = 0 auth_cache_negative_ttl = 0 auth_mechanisms = plain !include auth-ldap.conf.ext auth-ldap.conf.ext: ===================================== passdb { driver = ldap args = /etc/dovecot/passdb-dovecot-ldap.conf.ext } userdb { driver = ldap args = /etc/dovecot/userdb-dovecot-ldap.conf.ext } passdb-dovecot-ldap.conf.ext: ===================================== uris = ldap://ldap.example.com dn = uid=mailapp,ou=People,dc=example,dc=com dnpass = xxxxxxxxxx sasl_bind = no tls = no auth_bind = yes ldap_version = 3 base = dc=example,dc=com deref = never scope = subtree pass_attrs = uid=user pass_filter = (uid=%n) userdb-dovecot-ldap.conf.ext: ==================================== uris = ldap://ldap.example.com dn = uid=mailapp,ou=People,dc=example,dc=com dnpass = xxxxxxxxxx sasl_bind = no tls = no auth_bind = yes ldap_version = 3 base = dc=example,dc=com deref = never scope = subtree user_attrs = mailbox=mail=maildir:/var/maildir/%$,homeFilter=home,mailQuota=quota_rule=*:bytes=%$ user_filter = (&(objectClass=posixAccount)(uid=%n)) pass_attrs = uid=user,userPassword=password,\ mailbox=userdb_mail=maildir:/var/maildir/%$,homeFilter=userdb_home,mailQuota=userdb_quota_rule=*:bytes=%$ pass_filter = (&(objectClass=posixAccount)(uid=%n)) iterate_attrs = uid=user iterate_filter = (objectClass=posixMailAccount)

2 1

[Dovecot] whoson plugin for 2.0
by Chuck Cochems 23 Nov '12

23 Nov '12

I have found a plugin at ftp://ftp.ufanet.ru/pub/boco/dovecot/whoson-plugin/ I was able to make it function on a dovecot 1.2.8 server, by changing __attr_unused__ to ATTR_UNUSED and strlcpy to i_strocpy (since glibc doesn't HAVE strlcpy, on purpose). However, it doesn't work with 2.1 this is, of course, because getenv() no longer functions lie it used to in plugins. so i need a replacement for getenv("IP") and getenv("USER") to make this work. i know, pop before SMTP is stupid, but the isp i'm doing this for hs customers that have used pop before smtp for ages. so I MUST make a whoson plugin. as i said, the remote ip and the email address are required to interface with whoson. (this is superior to DRAC, which just opens the IP)

3 6

[Dovecot] Initial status notification not received
by Nicolas KOWALSKI 23 Nov '12

23 Nov '12

Hello, We have SLES-11 SP2 Xen VMs running dovecot as IMAP proxies. At VMs startup, dovecot almost always shows these errors: Nov 16 14:29:19 server dovecot: master: Dovecot v2.1.10 starting up (core dumps disabled) Nov 16 14:29:55 server dovecot: master: Error: service(anvil): Initial status notification not received in 30 seconds, killing the process Nov 16 14:29:55 server dovecot: master: Error: service(log): Initial status notification not received in 30 seconds, killing the process Nov 16 14:29:55 server dovecot: master: Error: service(ssl-params): Initial status notification not received in 30 seconds, killing the process Nov 16 14:29:55 server dovecot: master: Error: service(log): child 3591 killed with signal 9 As the last line tells, dovecot stops logging information. We have to restart the dovecot processes to get back normal behaviour. I also tried to set idle_kill values to services definitions, without success. Is there a way to prevent these errors? Here is the dovecot -n output: # 2.1.10: /etc/dovecot/dovecot.conf # OS: Linux 3.0.42-0.7-xen x86_64 SUSE Linux Enterprise Server 11 (x86_64) default_client_limit = 4096 default_idle_kill = 5 mins default_process_limit = 16384 listen = 10.254.251.18 managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date ihave namespace inbox { inbox = yes location = mailbox Drafts { special_use = \Drafts } mailbox Junk { special_use = \Junk } mailbox Sent { special_use = \Sent } mailbox "Sent Messages" { special_use = \Sent } mailbox Trash { special_use = \Trash } prefix = } passdb { args = /etc/dovecot/dovecot-ldap.conf.ext driver = ldap } plugin { sieve = ~/.dovecot.sieve sieve_dir = ~/sieve } protocols = imap sieve service anvil { client_limit = 65536 idle_kill = 0 } service auth { client_limit = 32768 } service imap-login { inet_listener imap { port = 0 } } service imap { process_limit = 0 } service log { idle_kill = 0 } service managesieve { process_limit = 0 } service ssl-params { idle_kill = 0 } ssl_ca = </etc/dovecot/ssl/ca.pem ssl_cert = </etc/dovecot/ssl/server-crt.pem ssl_key = </etc/dovecot/ssl/server-key.pem userdb { args = /etc/dovecot/dovecot-ldap.conf.ext driver = ldap } protocol sieve { passdb { args = /etc/dovecot/dovecot-ldap-sieve.conf.ext driver = ldap } } Thanks, -- Nicolas

2 3

[Dovecot] User iteration with static userdb
by Radek Novotný 23 Nov '12

23 Nov '12

Hi all, can someone explain me, please, why user iteration (iterate_query) doesn't work with static userdb? There isn't reason why it shouldn't work. In my opinion. However static userdb doesn't mean that user list not exist. Thanks Radek

2 1

[Dovecot] Is there a hook for a plugin to do some transient operation on the mail body ...
by Jay 23 Nov '12

23 Nov '12

... when the MUA has issued a FETCH? I am a Dovecot newbie ... so please bear with me if this is obvious. Basically what I am trying to do is process the mail body (in my own specific way) before Dovecot serves it up to the MUA. I want to do it as a transient operation in memory. So think of the scenario as ... - the MUA issues a FETCH - Dovecot intercepts the FETCH - Dovecot internally gets the mail from the storage into a buffer in memory ----> This is where I'd like to apply a function to the mail body and modify the mail body in the buffer (not in the storage) - Dovecot serves up the (modified) mail to the MUA Looking for a hook that allows me to do it using a plugin. Looks like the zlib plugin does something similar ... applies a decompression function ... but I am not 100% sure. Thanks for your help. -- J.

2 1

[Dovecot] Hardlink with Maildir a brief help
by Davide 23 Nov '12

23 Nov '12

Hi to all, my question is: Is possible implementing SIS (with hardlink) with maildir instead of *dbox format? If yes in dovecot.conf it's only necessary the below parameters or what else? mail_attachment_dir = /var/qmail/attachments I have also acting the zlib plugin it is not a problem isn't it? Thanks in advance for any response -- */Davide Marchi /Teorema Ferrara Srl /(Tel: /**/+39 0532 783161)/**/ (Fax: +/**/39 0532 783368/**/)/**//**/ /**//**/Davide.Marchi(a)mail.cgilfe.it <mailto:davide.marchi@mail.cgilfe.it?subject=Info> /CONFIDENZIALITA’ *** Questo messaggio, inclusi gli eventuali allegati, è indirizzato solo ai destinatari e può contenere informazioni riservate e confidenziali. Se avete ricevuto il messaggio senza esserne un destinatario, siete pregati di non utilizzare, copiare o distribuire questo messaggio o i suoi allegati. Se avete ricevuto il messaggio per errore, siete pregati di cancellarlo dal vostro sistema, assieme a tutti gli allegati, e di informare immediatamente il mittente,sia ai sensi dell'art. 616 c.p., sia ai sensi del DL n. 196/03. *CONFIDENTIALITY*** This message and any attachments are intended only for the use of the addressee(s) and may contain information that is privileged and/or confidential. If the reader of the message is not the intended recipient(s) or an authorized representative of the intended recipient(s), please do not use, copy, distribute this email or its attachments or take action based on them. If you have received this communication in error, please notify us immediately by email and delete the message and any attachments from your system. *Teorema FerraraSrl - Via Spronello, 7 - 44121 Ferrara Italia - P. IVA 01244490387** P**S**tampa questo messaggio solo se veramente necessario, pensa alla natura! - Please consider whether it is necessary to print this e-mail*

2 1

[Dovecot] IMAP session state inconsistent
by list＠airstreamcomm.net 23 Nov '12

23 Nov '12

Running Dovecot 1.2.12 (we are in the process of upgrading to 2.1.x) Didn't find much in old threads, but we are seeing the following in the logs this morning: dovecot: imap-login: Login: user=<wajabrun>, method=PLAIN, rip=x.x.x.x, lip=y.y.y.y dovecot: IMAP(wajabrun): Disconnected: IMAP session state is inconsistent, please relogin. bytes=443/1146 dovecot: imap-login: Login: user=<wajabrun>, method=PLAIN, rip=x.x.x.x, lip=y.y.y.y dovecot: IMAP(wajabrun): Disconnected: IMAP session state is inconsistent, please relogin. bytes=561/1637 dovecot: imap-login: Login: user=<wajabrun>, method=PLAIN, rip=x.x.x.x, lip=y.y.y.y dovecot: IMAP(wajabrun): file_dotlock_open() failed with file /mail/w/a/wajabrun/Maildir/.INBOX.02 ORDERS.Gaiam/dovecot.index.log: No such file or directory dovecot: IMAP(wajabrun): file_dotlock_open() failed with file /mail/w/a/wajabrun/Maildir/.INBOX.02 ORDERS.Gaiam/dovecot.index.log: No such file or directory Not sure what to make of this sequence?

2 1

[Dovecot] maildir and end-of-line encoding
by Christoph Anton Mitterer 23 Nov '12

23 Nov '12

Hi. I just wondered, the following: My MDA may get mails that use LF or CR/LF end of line encodings and deliver them into maildirs. I couldn't find any information about, whether one should or must convert all into one format, cause AFAIK at least on the IMAP side, CR/LF is always used? How does this work on the maildir/backend side of dovcot? Can it work with both and simply automatically convert LF into CR/LF? Thanks, Chris.

2 3

[Dovecot] Is there any Documentation or Howto/Guide for Dovecot Replication or do i have to wait for dovecot 2.2.x?
by weber＠zackbummfertig.de 23 Nov '12

23 Nov '12

dear timo, can you help me? best regards marko, from hamburg

3 2

[Dovecot] imap_acl and osx 10.7
by Piero Zucchi 22 Nov '12

22 Nov '12

Hello everybody, I'm trying to setup public folder with ACLs on a Lion Server 10.7.5 unfortunately it seems that the imap_acl plugin is not loaded properly do you have any advice? cheers Piero This is what i get from the log with imap_acl plugin enabled in protocol imap { } Log file: imap: Debug: Loading modules from directory: /usr/lib/dovecot Nov 22 09:08:14 xserve04 dovecot[87688]: imap: Error: dlopen(/usr/lib/dovecot/lib02_imap_acl_plugin.so) failed: dlopen(/usr/lib/dovecot/lib02_imap_acl_plugin.so, 10): Symbol not found: _acl_user_module Nov 22 09:08:14 xserve04 dovecot[87688]: imap: Error: Referenced from: /usr/lib/dovecot/lib02_imap_acl_plugin.so Nov 22 09:08:14 xserve04 dovecot[87688]: imap: Error: Expected in: flat namespace Nov 22 09:08:14 xserve04 dovecot[87688]: imap: Error: in /usr/lib/dovecot/lib02_imap_acl_plugin.so Nov 22 09:08:14 xserve04 dovecot[87688]: imap: Fatal: Couldn't load required plugins Nov 22 09:08:14 xserve04 dovecot[43220]: master: Error: service(imap): command startup failed, throttling dovecot config # 2.0.16apple1: /etc/dovecot/dovecot.conf # OS: Darwin 11.4.2 x86_64 acfs auth_debug = yes auth_debug_passwords = yes auth_gssapi_hostname = $ALL auth_mechanisms = cram-md5 x-plain-submit apop gssapi plain login auth_socket_path = /var/run/dovecot/auth-userdb auth_username_format = %n default_internal_user = _dovecot default_login_user = _dovenull disable_plaintext_auth = no first_valid_gid = 6 first_valid_uid = 6 hostname = mail.customer.com mail_access_groups = mail mail_debug = yes mail_location = maildir:/Volumes/XsanVolume/Mail/%u mail_log_prefix = "%s(pid %p user %u): " mail_plugins = quota zlib fts fts_sk acl managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date ihave mdbox_rotate_size = 200 M namespace { inbox = yes location = prefix = separator = / type = private } namespace { hidden = yes list = children location = maildir:/Volumes/XsanVolume/Mail/Condivise/Interno:CONTROL=/Volumes/XsanVolume/Mail/Condivise/Indexes/%u/shared_Interno:INDEX=/Volumes/XsanVolume/Mail/Condivise/Indexes/%u/shared_Interno prefix = Interno/ separator = / subscriptions = no type = public } passdb { args = /etc/dovecot/submit.passdb driver = passwd-file pass = yes submit = yes } passdb { driver = od } plugin { acl = vfile fts = sk quota = maildir:User quota quota_warning = storage=100%% quota-exceeded %u quota_warning2 = storage=80%% quota-warning %u sieve = /Library/Server/Mail/Data/rules/%u/dovecot.sieve sieve_dir = /Library/Server/Mail/Data/rules/%u } postmaster_address = postmaster(a)xserve04.customer.com protocols = imap pop3 lmtp sieve quota_full_tempfail = yes service auth { extra_groups = _keytabusers idle_kill = 15 mins } service dns_client { unix_listener dns-client { mode = 0600 } } service imap-login { inet_listener imap { port = 143 } inet_listener imaps { port = 993 ssl = yes } service_count = 0 } service imap-postlogin { executable = script-login -d /etc/dovecot/acl_groups.sh unix_listener imap-postlogin { group = mail mode = 0600 user = _dovecot } user = _dovecot } service imap { client_limit = 5 executable = imap imap-postlogin process_limit = 200 service_count = 0 } service lmtp { unix_listener lmtp { mode = 0600 } } service managesieve-login { inet_listener sieve { port = 4190 } inet_listener sieve_deprecated { port = 2000 } } service pop3-login { inet_listener pop3 { port = 110 } inet_listener pop3s { port = 995 ssl = yes } } service pop3 { client_limit = 5 process_limit = 200 service_count = 0 } service quota-exceeded { executable = script /usr/libexec/dovecot/quota-exceeded.sh unix_listener quota-exceeded { group = mail mode = 0660 user = _dovecot } user = _dovecot } service quota-warning { executable = script /usr/libexec/dovecot/quota-warning.sh unix_listener quota-warning { group = mail mode = 0660 user = _dovecot } user = _dovecot } ssl_ca = </etc/certificates/xserve04.customer.com.AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA.chain.pem ssl_cert = </etc/certificates/xserve04.customer.com.AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA.cert.pem ssl_cipher_list = ALL:!LOW:!SSLv2:!EXP:!aNULL:!ADH:!eNULL ssl_key = </etc/certificates/xserve04.customer.com.AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA.key.pem ssl_key_path = /etc/certificates/xserve04.customer.com.AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA.key.pem syslog_facility = local6 userdb { args = partition=/etc/dovecot/partition_map.conf enforce_quotas=yes driver = od } verbose_proctitle = yes protocol lmtp { mail_plugins = quota zlib fts fts_sk sieve } protocol lda { mail_plugins = quota zlib fts fts_sk sieve } protocol imap { imap_id_log = * imap_id_send = "name" * "version" * mail_max_userip_connections = 20 mail_plugins = quota zlib fts fts_sk imap_quota imap_zlib imap_fts imap_acl urlauth } protocol pop3 { mail_max_userip_connections = 6 } -- Piero Zucchi Apple Certified Trainer Apple Certified Specialist Professional 10.8 Apple Certified Technical Coordinator 10.7 Apple Certified System Administrator 10.6 Apple Certified Technical Coordinator 10.6 Apple Certified Specialist - Mac Os X Directory Services 10.6 Apple Certified Specialist - Mobility and Security 10.6 Apple Certified System Administrator 10.5 Apple Certified Technical Coordinator 10.5 Apple Certified Support Professional 10.5 Apple Certified Pro - Final Cut Pro 7, Level 1

4 6

Re: [Dovecot] users mail folders have to be subscribed
by Andre Bischof 22 Nov '12

22 Nov '12

Daniel, Am 19.11.2012 23:32 schrieb "Daniel Parthey" < daniel.parthey(a)informatik.tu-chemnitz.de>: > > Andre Bischof wrote: > > doveadm mailbox subscribe -u user(a)example.com "*" > > > > Should the user for "-u" be the system user the > > mailboxes belong to or has the user to be written in form of an email > > adress (user@localhost / user(a)n.dyndns.org)? > > It should be the same userdb username as used for imap login. Thank you. One thing that still doesn't work is subscribing to all mailboxes via "*", I guess because the folder names start with "." but dovecot mailbbox subscribe wants it without a starting "." Any clues how that can be solved? Regards Andre

2 2

[Dovecot] XMLRPC anyone?
by Egbert 21 Nov '12

21 Nov '12

Hi, Is there any code around that lets Dovecot (2.x) aauthenticate via a XMLRPC server (which connects to a LDAP server) instead of going directly to a LDAP server? It could give much more flexibility. TIA Egbert Jan, NL

1 0

[Dovecot] Autocreate No namespace for Problem
by tibby＠tibby.hu 21 Nov '12

21 Nov '12

Hi! I see this in the log: autocreate: No namespace found for Trash autocreate: No namespace found for Spam autocreate: No namespace found for Sent autocreate: No namespace found for Trash autocreate: No namespace found for Spam autocreate: No namespace found for Sent Why do I get this error ? Do I need to create a separate namespace for every folder? The config file looks like this: namespace private { separator = . prefix = INBOX. inbox = yes subscriptions = yes list = yes } ... plugin { autocreate = Trash autocreate2 = Spam autocreate3 = Sent autosubscribe = Trash autosubscribe2 = Spam autosubscribe3 = Sent } Thanks!

2 1

[Dovecot] v2.1 memory usage
by Timo Sirainen 21 Nov '12

21 Nov '12

v2.1's imap/pop3 processes are linked with OpenSSL by default, because of imapc/pop3c storages. I wonder if you notice any actual (system-global) memory usage reduction when compiling without those and you have thousands of imap processes? ./configure --with-storages=mdbox sdbox maildir mbox cydir I guess I could try it myself also but maybe someone else wanting to reduce memory usage is quicker? :) Related to that, you can look at where imap processes' memory goes with: http://dovecot.org/tools/linux-maps-parse-imap.pl I don't know how much memory those (writable!) file-backed memory areas actually use per-process. Maybe nothing, maybe something..

8 13

[Dovecot] Need help for configure sieve
by Mathieu R. 21 Nov '12

21 Nov '12

Hello, i just did set up a mail server with postfix+dovecot+mysql+roundcube everything work fine. Now i'm trying to configure dovecot to get sieve working, and i probably missing something, cause i can not get it to fall in work... Thanks in advance, if you can help me a bit... here is my dovecot (2.1.10) conf : 20:07 root@curzio /home/mathieu # dovecot -n # 2.1.10: /etc/dovecot/dovecot.conf # OS: Linux 3.2.30-xenU-7157-x86_64 x86_64 Arch Linux mail_home = /srv/vmail/%d/%u mail_location = maildir:~ managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date ihave passdb { args = /etc/dovecot/dovecot-sql.conf driver = sql } plugin { sieve = ~/.dovecot.sieve sieve_dir = ~/sieve } protocols = imap pop3 sieve service auth { unix_listener auth-client { group = postfix mode = 0660 user = postfix } user = root } ssl_cert = </etc/ssl/private/server.crt ssl_key = </etc/ssl/private/server.key userdb { args = /etc/dovecot/dovecot-sql.conf driver = sql } protocol lda { mail_plugins = " sieve" } here is my postfix conf : 20:07 root@curzio /home/mathieu # postconf -n alias_database = $alias_maps alias_maps = hash:/etc/postfix/aliases broken_sasl_auth_clients = yes command_directory = /usr/sbin config_directory = /etc/postfix daemon_directory = /usr/lib/postfix data_directory = /var/lib/postfix debug_peer_level = 2 debugger_command = PATH=/bin:/usr/bin:/usr/local/bin:/usr/X11R6/bin ddd $daemon_directory/$process_name $process_id & sleep 5 html_directory = no inet_protocols = ipv4 local_recipient_maps = $virtual_mailbox_maps local_transport = virtual mail_owner = postfix mailq_path = /usr/bin/mailq manpage_directory = /usr/share/man newaliases_path = /usr/bin/newaliases queue_directory = /var/spool/postfix readme_directory = /usr/share/doc/postfix relay_domains = * sample_directory = /etc/postfix/sample sendmail_path = /usr/sbin/sendmail setgid_group = postdrop smtpd_recipient_restrictions = permit_mynetworks, permit_sasl_authenticated, reject_unauth_destination smtpd_sasl_auth_enable = yes smtpd_sasl_local_domain = $mydomain smtpd_sasl_path = /var/run/dovecot/auth-client smtpd_sasl_security_options = noanonymous smtpd_sasl_tls_security_options = $smtpd_sasl_security_options smtpd_sasl_type = dovecot smtpd_tls_auth_only = yes smtpd_tls_cert_file = /etc/ssl/private/server.crt smtpd_tls_key_file = /etc/ssl/private/server.key smtpd_tls_loglevel = 1 transport_maps = hash:/etc/postfix/transport unknown_local_recipient_reject_code = 550 virtual_alias_maps = proxy:mysql:/etc/postfix/virtual_alias_maps.cf virtual_gid_maps = static:5000 virtual_mailbox_base = /srv/vmail virtual_mailbox_domains = proxy:mysql:/etc/postfix/virtual_domains_maps.cf virtual_mailbox_limit = 512000000 virtual_mailbox_maps = proxy:mysql:/etc/postfix/virtual_mailbox_maps.cf virtual_minimum_uid = 5000 virtual_transport = virtual virtual_uid_maps = static:5000 i use the roundcube plugin managesieve, wich seems to work correctly. -- Mathieu R.

2 8

[Dovecot] ACL and SSL
by Dave Shariff Yadallee - System Administrator a.k.a. The Root of the Problem 20 Nov '12

20 Nov '12

Finally got Dovecot to work on ports 100 and 143. I would like to a) Learn about ACL esp on port 110 as there are still yodellaks that try to brake in on port 110. b) Setting up separate SSL cert for imaps and pop3s. -- For effective Internet Etiquette and communications read http://catb.org/jargon/html/T/top-post.html, http://idallen.com/topposting.html & http://www.caliburn.nl/topposting.html -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean.

4 6

[Dovecot] FYI: News about Mark Crispin
by Timo Sirainen 20 Nov '12

20 Nov '12

Begin forwarded message: > From: Barry Leiba <barryleiba(a)computer.org> > Date: 20. marraskuuta 2012 2.44.51 UTC+2.00 > To: imap5(a)ietf.org, imapext(a)ietf.org, imap-protocol(a)u.washington.edu, imap-use(a)u.washington.edu > Subject: [imapext] News about Mark Crispin > Reply-To: imap5(a)ietf.org > > Everyone here knows Mark Crispin -- or at least knows who he is: Mark is the author of the original IMAP specification, and has taken it through its different versions to the present IMAP4rev1. He's written reference implementations of both server and client, and has been a vocal participant on all the mailing lists I'm posting this to. > > I'm sad to have to report that Mark is now terminally ill, and is in hospice care. > > For now, at least, I'm told that Mark is at least somewhat aware. If anyone has brief well-wishing messages they'd like to send him, please post them to the <imap5(a)ietf.org> mailing list, and I'll forward them to Mark's long-term companion, Annie. I will also post updates to that list as I get them. > > [The Reply-To for this message is set to <imap5(a)ietf.org>, so that replies will go there. You will have to subscribe to that mailing list in order to post to it. You can do that here: > http://www.ietf.org/mailman/listinfo/imap5 ] > > Barry Leiba > > _______________________________________________ > imapext mailing list > imapext(a)ietf.org > https://www.ietf.org/mailman/listinfo/imapext >

2 1

[Dovecot] users mail folders have to be subscribed
by Andre Bischof 20 Nov '12

20 Nov '12

Hi, I did a migration from cyrus 2.2 to dovecot (fresh installation, details below) via cyrus2dovecot from FU Berlin. That worked, but I first was missing mails in subfolders ander Inbox. No I detected that they are in the users Maildir in folders in his directory. They are listed when using telnet: * LIST (\HasChildren) "." "INBOX.ebay" * LIST (\HasNoChildren) "." "INBOX.ebay.xj" But they are not shown in thunderbird, I have to subscribe to them one by one. I probably did something wrong and maybe messed up with namespace and seperator settings - it would be great if one could lead me out of that. The wiki was a great help installing and configuring everything, but now I'm stuck. I use dovecot 2.1.7 under Ubuntu 12.10: # dovecot -n # 2.1.7: /etc/dovecot/dovecot.conf # OS: Linux 3.5.0-18-generic x86_64 Ubuntu 12.10 auth_verbose = yes mail_debug = yes mail_location = maildir:~/Maildir managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation s ubaddress comparator-i;ascii-numeric relational regex imap4flags copy include variab les body enotify environment mailbox date ihave namespace inbox { inbox = yes list = yes location = prefix = separator = . type = private } passdb { driver = pam } plugin { sieve = ~/.dovecot.sieve sieve_dir = ~/sieve } postmaster_address = postmaster@localhost protocols = imap pop3 sieve service auth { unix_listener /var/spool/postfix/private/dovecot-auth { group = postfix mode = 0660 user = postfix } } ssl_cert = </etc/ssl/certs/dovecot.pem ssl_cipher_list = ALL:!LOW:!SSLv2:ALL:!aNULL:!ADH:!eNULL:!EXP:RC4+RSA:+HIGH:+MEDIUM ssl_key = </etc/ssl/private/dovecot.pem userdb { driver = passwd } protocol imap { imap_client_workarounds = delay-newmail mail_max_userip_connections = 10 } protocol pop3 { mail_max_userip_connections = 10 pop3_client_workarounds = outlook-no-nuls oe-ns-eoh } } ssl_cert = </etc/ssl/certs/dovecot.pem ssl_cipher_list = ALL:!LOW:!SSLv2:ALL:!aNULL:!ADH:!eNULL:!EXP:RC4+RSA:+HIGH:+MEDIUM ssl_key = </etc/ssl/private/dovecot.pem userdb { driver = passwd } protocol imap { imap_client_workarounds = delay-newmail mail_max_userip_connections = 10 } protocol pop3 { mail_max_userip_connections = 10 pop3_client_workarounds = outlook-no-nuls oe-ns-eoh } protocol lda { deliver_log_format = msgid=%m: %$ mail_plugins = sieve sieve postmaster_address = postmaster quota_full_tempfail = yes rejection_reason = Your message to <%t> was automatically rejected:%n%r } Any help is greatly appreciated! Regards Andre

3 6

[Dovecot] Unsuscribe
by Hendrik 19 Nov '12

19 Nov '12

Please unsubscribe me

3 2

[Dovecot] Data Store Synchronization
by Roman Gelfand 19 Nov '12

19 Nov '12

Is there a way to synchronize dovecote mail store with another mail store, like zarafa, via imap or pop3? Thanks in advance

2 1

[Dovecot] upgrade 1.0.15 -> 2.1.7: MBOX index compatibility and performance
by Benoit Branciard 19 Nov '12

19 Nov '12

Hi, we just upgraded our mailserver from Dovecot 1.0.15 to Dovecot 2.1.7. We use MBOX format (due to legacy compatibility), system users, PAM+GSSAPI auth, filesystem quotas, and indexes located on a separate filesystem: mail_location = mbox:~/mail:INBOX=~/mail/INBOX:INDEX=/var/cache/dovecot/indexes/%16Hu/%u The 2.1.7 configuration files have been rewritten based on default templates instead of converting it from 1.0.15. The server has ~8000 mailboxes and about ~2000 simultaneous IMAP/POP active connexions. The problem is: - indexes seem to be rebuilt: first IMAP/POP connexion for each user thows lots of error messages in the log, and the global index size decreases. Example error log: Nov 19 08:56:38 myhost dovecot: imap(myuser): Error: Cached message size larger than expected (27884 > 27855) Nov 19 08:56:38 myhost dovecot: imap(myuser): Error: Corrupted index cache file /var/cache/dovecot/indexes/4/myuser/.imap/INBOX/dovecot.index.cache: Broken physical size for mail UID 4414 Nov 19 08:56:38 myhost dovecot: imap(myuser): Error: Cached message size larger than expected (27884 > 27855) Nov 19 08:56:38 myhost dovecot: imap(myuser): Error: Corrupted index cache file /var/cache/dovecot/indexes/4/myuser/.imap/INBOX/dovecot.index.cache: Broken physical size for mail UID 4414 Nov 19 08:56:38 myhost dovecot: imap(myuser): Error: Cached message size larger than expected (27884 > 27855) Nov 19 08:56:38 myhost dovecot: imap(myuser): Error: Corrupted index cache file /var/cache/dovecot/indexes/4/myuser/.imap/INBOX/dovecot.index.cache: Broken physical size for mail UID 4414 Nov 19 08:56:38 myhost dovecot: imap(myuser): Error: Cached message size larger than expected (27884 > 27855) Nov 19 08:56:38 myhost dovecot: imap(myuser): Error: Corrupted index cache file /var/cache/dovecot/indexes/4/myuser/.imap/INBOX/dovecot.index.cache: Broken physical size for mail UID 4414 Nov 19 08:56:38 myhost dovecot: imap(myuser): Error: copy: i_stream_read() failed: Input/output error Nov 19 08:56:38 myhost dovecot: imap(myuser): Error: Cached message size larger than expected (27884 > 27855) Nov 19 08:56:38 myhost dovecot: imap(myuser): Error: Corrupted index cache file /var/cache/dovecot/indexes/4/myuser/.imap/INBOX/dovecot.index.cache: Broken physical size for mail UID 4414 - load average is extremely high (more than 10x the usual one), resulting from an significant increase of disk I/O, and for now (4h after the "monday rush") this doesn't seem to decrease. Questions: - are 1.05 indexes supposed to be backward compatible with Dovecot 2.1.7 ? - are there some technical reasons which could explain the increase of disk I/O, apart from index rebuild ? -- Benoit BRANCIARD Service InfraStructures (SIS) - Direction du Système d'Information (DSI) Université Paris 1 Panthéon-Sorbonne Centre Pierre Mendès France B 406 - 90, rue de Tolbiac - 75634 Paris cedex 13 - France Tél : +33 1 44 07 89 68 - Fax : +33 1 44 07 89 66 Accueil tél. : +33 1 44 07 89 65 Assistance : assistance-dsi(a)univ-paris1.fr Web : http://dsi.univ-paris1.fr -- Ce message a ete verifie par MailScanner pour des virus ou des polluriels et rien de suspect n'a ete trouve.

1 0

[Dovecot] advices for a new installation
by Surviet Amine 18 Nov '12

18 Nov '12

hello everyone, first of all, please forgive my bad english skill, I live in France. On our "old" Dovecot 1.x architecture, we have NFS shares between the front servers (MTA, IMAP...) and mail storage server. I've read some wiki2 pages that present the new director and imap proxy. But I'm still don't see things clearly, so I post here to have your advices to set-up a new mail architecture. The hardware we have : - 24x hard drives in a SAS bay - this bay is directly attached via SAS to a server that I'll call : mail storage server - 2 others servers run ProxMox Virtual Environment The PVE will help us to get many virtual servers : - MX : "mail in" servers - IMAP/POP : our hosted clients services These clients may come from webmail (RoundCube) and others clients (Outlook, Thunderbird, mobile clients...) - RoundCube webmail - MySQL server (hosts in databases accounts and settings for Postfix, Dovecot and RoundCube) - maybe antivirus and antispam servers I've read several threads about NFS and IMAP issues. So I decided to not keeping it. In this scenario, I've tried for the mail receiving part : - front-end (postfix lmtp-client) to mail storage server (lmtp server) that seems to runs fine, now i'll must try to add antispam and antivirus scans Now, for the IMAP part, could you, please tell me, if it is better to : - have several IMAP frontend servers that proxy to the mail storage server or - still keeps NFS between the mail storage server and the frontends Dovecot ? On our Dovecot 1.x webmail use imapproxy. I've read that others proxies exist. We have used for a limited time Perdition. What is the differences between imapproxy, Perdition, nginx imap proxy and Dovecot proxy ? Thanks for sharing your experience of "large mail service" that are solid enought to be scaled.

1 0

[Dovecot] Different Mechanism for POP3
by Tim Smith 18 Nov '12

18 Nov '12

Just wondered if there was a way of making the PLAIN an authentication method for POP3S transactions only without making this an option for IMAP? I am attempting to connect to a POP3S server through the GMail interface available through "Accounts and Import". The issue is that there does not seem to be an option to specify the type of mechanism within their interface so I think I have to offer PLAIN along with SSL. Has anyone else had any experience of using the GMail import settings? -- Tim Smith Tel: 01423 564 078 Mob: 07984 398 299 Email: info(a)titan21.co.uk Web: www.titan21.co.uk

3 2

[Dovecot] couple questions about dovecot
by Raan Young 18 Nov '12

18 Nov '12

I am attempting to migrate an ancient IMAP server to Dovecot 2.0.9 running on CentOS 6.3, while trying to minimize the impact on users. Most are using Outlook. I have everything working, but have run into a couple of problems, neither horrible, but both weird. It started when I noticed Outlook shows the .subscriptions file in the folder listing. I figured out a way to prevent that (see below), but then decided to attempt the same tactic to move the .imap index structure out of the folder tree and ran into an interesting side-effect. The .subscriptions issue would seem to be a bug, since the documentation I found implies Dovecot should be hiding it from list requests - as it does for the .imap index structure. I made a workaround by using the below mail_location setting. This puts the .subscriptions file above the imap folder structure and hence outside the list scope. mail_location = mbox:~/imap:INBOX=~/mbox:CONTROL=~:INDEX=~/.imap You'll note I have also moved the .imap index. This works, but the full path to the index files has extra layers of .imap. For example, if a folder tree of imap/A/B/C/D exists, where D is the actual mbox format message file, then the index files are stored in .imap/A/B/C/.imap/D. Don't know if this is a bug or I'm misunderstanding something. Can you provide any insight or better solutions for either issue? Some clients are also using iPhones and/or roundcubemail for web access. Those do not have the .subscriptions issue. Raan

1 0

[Dovecot] dovecot: lda(root): Fatal: Invalid user settings. Refer to server log for more information.
by Thufir 17 Nov '12

17 Nov '12

I ran dovecot -a and the blizzard of data seemed ok to my limited knowledge. Is there another log I should look into to trace this error down? Dovecot and system info: thufir@dur:~$ thufir@dur:~$ dovecot --version 2.0.19 thufir@dur:~$ thufir@dur:~$ cat /etc/lsb-release DISTRIB_ID=Ubuntu DISTRIB_RELEASE=12.04 DISTRIB_CODENAME=precise DISTRIB_DESCRIPTION="Ubuntu 12.04.1 LTS" thufir@dur:~$ testing postfix & dovecot (http://packages.ubuntu.com/precise/dovecot-postfix) root@dur:/etc/postfix# root@dur:/etc/postfix# telnet localhost 25 Trying 127.0.0.1... Connected to localhost. Escape character is '^]'. 220 dur.bounceme.net ESMTP Postfix (Ubuntu) helo me 250 dur.bounceme.net mail from:foo@bar.com 250 2.1.0 Ok rcpt to:root@dur.bounceme.net 250 2.1.5 Ok data 354 End data with <CR><LF>.<CR><LF> subject:ping 3 blah blah . 250 2.0.0 Ok: queued as 35EC92A0D72 quit 221 2.0.0 Bye Connection closed by foreign host. root@dur:/etc/postfix# root@dur:/etc/postfix# tail /var/log/mail.log Nov 16 12:30:07 dur postfix/smtpd[4113]: connect from localhost[127.0.0.1] Nov 16 12:30:40 dur postfix/smtpd[4113]: 35EC92A0D72: client=localhost[127.0.0.1] Nov 16 12:30:52 dur postfix/cleanup[4133]: 35EC92A0D72: message-id=<20121116203040.35EC92A0D72(a)dur.bounceme.net> Nov 16 12:30:52 dur postfix/qmgr[1681]: 35EC92A0D72: from=<foo(a)bar.com>, size=321, nrcpt=1 (queue active) Nov 16 12:30:52 dur dovecot: lda(root): Error: chdir(/root/) failed: Permission denied (euid=65534(nobody) egid=65534(nogroup) missing +x perm: /root, dir owned by 0:0 mode=0700) Nov 16 12:30:52 dur dovecot: lda(root): Error: chdir(/root) failed: Permission denied Nov 16 12:30:52 dur dovecot: lda(root): Error: user root: Initialization failed: Initializing mail storage from mail_location setting failed: stat(/root/Maildir) failed: Permission denied (euid=65534(nobody) egid=65534(nogroup) missing +x perm: /root, dir owned by 0:0 mode=0700) Nov 16 12:30:52 dur dovecot: lda(root): Fatal: Invalid user settings. Refer to server log for more information. Nov 16 12:30:52 dur postfix/local[4134]: 35EC92A0D72: to=<root(a)dur.bounceme.net>, relay=local, delay=25, delays=25/0.02/0/0.12, dsn=4.3.0, status=deferred (temporary failure) Nov 16 12:30:56 dur postfix/smtpd[4113]: disconnect from localhost[127.0.0.1] root@dur:/etc/postfix# thanks, Thufir

3 6

[Dovecot] Change errors to spanish
by Yago Alonso - Ityd 15 Nov '12

15 Nov '12

Hello, i have dovecot version 1.2.17 and i need to translate all the errors that my users receive when a mail fails to send. Were and how should i change it? Thanks a lot! -- Yago Alonso

2 1

[Dovecot] emails are not displayed
by Daniel Fischer 15 Nov '12

15 Nov '12

Hello, i have a problem with some public folders in my testing environment. But after the series, here is my konfiguraion: doveconf -n # 2.1.7: /etc/dovecot/dovecot.conf # OS: Linux 3.2.0-3-amd64 x86_64 Debian wheezy/sid hostname = ......................................... lda_mailbox_autocreate = yes lda_mailbox_autosubscribe = yes listen = * mail_debug = no mail_gid = 5000 mail_location = maildir:~:INDEX=/var/mail/indexes/%d/%n mail_plugins = acl mail_privileged_group = vmail mail_uid = 5000 managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date ihave namespace { list = children location = maildir:/var/mail/vhosts/%d/public:INDEX=/var/mail/indexes/%d/public:CONTROL=/var/mail/controls/%d/public prefix = Public. separator = . subscriptions = no type = public } namespace inbox { hidden = no inbox = yes list = yes location = prefix = separator = . subscriptions = yes type = private } passdb { args = scheme=CRAM-MD5 username_format=%u /var/mail/vhosts/auth.d/%d/shadow driver = passwd-file } plugin { acl = vfile antispam_allow_append_to_spam = no antispam_backend = pipe antispam_pipe_program = /usr/local/bin/sa-learn-pipe.sh antispam_pipe_program_notspam_arg = --ham antispam_pipe_program_spam_arg = --spam antispam_pipe_tmpdir = /tmp antispam_spam = Spam antispam_trash = Trash sieve = /var/mail/vhosts/sieve/users/%d/%n/.dovecot.sieve sieve_before = /var/mail/vhosts/sieve/%d/before sieve_dir = /var/mail/vhosts/sieve/users/%d/%n sieve_global_dir = /var/mail/vhosts/sieve/%d/global sieve_user_log = /var/mail/vhosts/sieve/users/%d/%n/.dovecot.sieve.log } postmaster_address = postmaster@..... protocols = " imap lmtp sieve pop3" service auth { unix_listener /var/spool/postfix/private/auth { mode = 0666 } unix_listener auth-userdb { mode = 0660 user = vmail } } service managesieve-login { inet_listener sieve { port = 4190 } } ssl_cert = </etc/ssl/private/................................. ssl_key = </etc/ssl/private/......................... userdb { args = username_format=%u /var/mail/vhosts/auth.d/%d/passwd driver = passwd-file } protocol lmtp { mail_plugins = acl sieve } protocol lda { log_path = /var/log/sieve.log mail_plugins = acl sieve } protocol imap { imap_idle_notify_interval = 24 mins mail_plugins = acl imap_acl antispam } protocol sieve { managesieve_implementation_string = Dovecot Pigeonhole managesieve_logout_format = bytes=%i/%o } the problem is that any, not all public folder appear empty. if I delete the index files, I see the emails again for a while(1-2 hours) until they're gone again sometime. The directories change their content not for weeks. It is a test environment. but in one of the folders are more than 13000 mails (the Faxbox). Currently 3 of 13 folders are affected. I thought that it may be due to the size, but it is not the largest folders. For normal mail boxes I have not observed this effect. a3 EXAMINE Public.faxe * FLAGS (\Answered \Flagged \Deleted \Seen \Draft) * OK [PERMANENTFLAGS ()] Read-only mailbox. * 0 EXISTS * 0 RECENT * OK [UIDVALIDITY 1349419566] UIDs valid * OK [UIDNEXT 141737] Predicted next UID * OK [HIGHESTMODSEQ 5] Highest Delete indexes.... /var/mail/indexes/........../public# rm -r .faxe/ a3 EXAMINE Public.faxe * OK [CLOSED] Previous mailbox closed. * FLAGS (\Answered \Flagged \Deleted \Seen \Draft) * OK [PERMANENTFLAGS ()] Read-only mailbox. * 13778 EXISTS * 0 RECENT * OK [UIDVALIDITY 1349419566] UIDs valid * OK [UIDNEXT 141737] Predicted next UID * OK [NOMODSEQ] No permanent modsequences i would like to show you log files but i didn't see any error message. Does Have anyone an idea? Thanks for comment... Daniel

1 0

[Dovecot] auth attempts errors
by burak gürer 15 Nov '12

15 Nov '12

i have install 2.1.1 and configured in dovecot log this error is coming every 20 seconds: dovecot: imap-login: Disconnected (no auth attempts in 0 secs): rip=**********, lip=**********, TLS handshaking: SSL_accept() syscall failed: Connection reset by peer and this error every 2 seconds: dovecot: imap-login: Disconnected (no auth attempts in 0 secs): rip=**********, lip=********** what can be the problem? thanks..

3 7

[Dovecot] multiple users to same e-mail account with ldap authentication
by Marco Gatti 14 Nov '12

14 Nov '12

Hi, I was looking for a particular case of dovecot configuration I cannot find anywhere. Is there a way dovecot can authenticate via ldap different windows 2008 AD users that have access to the same e-mail account (like user authorization in ms exchange)? For example I want to extend AD schema to let users have 10 email accounts (with multiple domain support). If they are private accounts I think there is no problem at all. But if I want two or more users to access the same mail account what happens? Can I do it with dovecot? Or should I create AD groups and add members to that, to let user access the same mail account? Cheers -- Marco

4 9

Re: [Dovecot] IPhone wont delete IMAP messages from dovecot mailbox
by tibby＠tibby.hu 14 Nov '12

14 Nov '12

Hello! I've got dovecot running with postfix. Have virtual users under vmail folder. When I connect with outlook, I can read, delete messages. When I sign on with webmail, also can delete messages, Mutt is working as well on the mail server, can delete messages. Once the message is deleted it moves to the trash. Works as it supposed to. But on Iphone, when I add a mail user, got the mailbox synced with IMAP I can see the INBOX, but when I delete a message, get this error: "Unable to Move Message The message could not be moved to the mailbox Trash." http://www.netchimp.co.uk/webdesign/wp-content/uploads/2011/12/iphone_unabl… What causing this problem? Please Help.

6 9