- dovecot - dovecot.org

[Dovecot] Patch for seg fault in 1.0.10
by Richard Platel 17 Jan '08

17 Jan '08

Hi SELECTING a non-existent folder in 1.0.10 with maildir causes a seg fault and client disconnect. I believe this patch fixes the problem.

1 0

[Dovecot] Quota 1.1 problem
by Raphael Bittencourt S. Costa 17 Jan '08

17 Jan '08

Helo all, I'm trying to use Dovecot v1.1.beta13 lda with ldap. I made a tons of change in configurations but still can't set quota from ldap. See below: Log: Jan 16 17:37:09 mailserver-03 dovecot: auth(default): userdb(teste(a)xxx.com.br,127.0.0.1): Invalid GID value '*:bytes=1033' dovecot-ldap.conf: user_attrs = mailMessageStore=home,qmailUID=uid,qmailGID=gid,mailQuotaSize=quota_rule=*:bytes=%$ ldap: dn: cn=teste,ou=xxx.com.br,ou=accounts mailHostAddress: 10.0.149.3 userPassword:: e1NIQX1kNXFTUFdteTRISjBleEdYVzZocFNkNFdjRGM9 mailQuotaSize: 10485760 deliveryMode: nombox objectClass: top objectClass: person objectClass: organizationalPerson objectClass: inetOrgPerson objectClass: qmailUser accountStatus: active cn: teste qmailGID: 1033 qmailUID: 1033 mail: teste(a)xxx.com.br mailMessageStore: /data/services/dominios/xxx.com.br/t/te/teste/ uid: teste(a)xxx.com.br sn: teste mailHost: mailserver03.xxx.com.br []s, Raphael Costa

2 1

[Dovecot] Need help to install dovecot on solaris 10 with openldap libs
by Dovecot Jami 17 Jan '08

17 Jan '08

Hi, I install dovecot with ldap support at Solaris 10 (x86). I know that solaris LDAP is broken and so I install openldap. OpenLDAP shared libraries are at /usr/local/lib and /usr/local/include. While installing dovecot, I did the followings: I execute this before run "./configure --with-ldap" LDFLAGS="-L/usr/local/BerkeleyDB.4.2/lib -R/usr/local/BerkeleyDB.4.2/lib -L/usr/local/lib -R/usr/local/lib" but dovecot is using the Solaris default LDAP lib files. I also run LDFLAGS="-R/usr/local/lib" and LDFLAGS="-L/usr/local/BerkeleyDB.4.2/lib -L/usr/local/lib /usr/local/lib/libldap-2.3.so.0 " But dovecot is still using solaris ldap libs. ldd /usr/local/libexec/dovecot/dovecot-auth libcrypt_i.so.1 => /usr/lib/libcrypt_i.so.1 libpam.so.1 => /lib/libpam.so.1 libldap.so.5 => /usr/lib/libldap.so.5 libsocket.so.1 => /lib/libsocket.so.1 libnsl.so.1 => /lib/libnsl.so.1 librt.so.1 => /lib/librt.so.1 libsendfile.so.1 => /lib/libsendfile.so.1 libc.so.1 => /lib/libc.so.1 libgen.so.1 => /lib/libgen.so.1 libcmd.so.1 => /lib/libcmd.so.1 libsasl.so.1 => /usr/lib/libsasl.so.1 libmd5.so.1 => /lib/libmd5.so.1 libnspr4.so => /usr/lib/mps/libnspr4.so libplc4.so => /usr/lib/mps/libplc4.so libnss3.so => /usr/lib/mps/libnss3.so libssl3.so => /usr/lib/mps/libssl3.so libmp.so.2 => /lib/libmp.so.2 libscf.so.1 => /lib/libscf.so.1 libaio.so.1 => /lib/libaio.so.1 libpthread.so.1 => /lib/libpthread.so.1 libthread.so.1 => /lib/libthread.so.1 libdl.so.1 => /lib/libdl.so.1 libsoftokn3.so => /usr/lib/mps/libsoftokn3.so libplds4.so => /usr/lib/mps/libplds4.so libdoor.so.1 => /lib/libdoor.so.1 libuutil.so.1 => /lib/libuutil.so.1 libbsm.so.1 => /lib/libbsm.so.1 libsecdb.so.1 => /lib/libsecdb.so.1 libtsol.so.2 => /lib/libtsol.so.2 libm.so.2 => /lib/libm.so.2 Please help me to solve this problem. Mahmud Jami --------------------------------- Looking for last minute shopping deals? Find them fast with Yahoo! Search.

2 1

[Dovecot] convert plugin fails - drops root privileges then tries to create file in /
by Mikel Ward 17 Jan '08

17 Jan '08

Hi I just tried to run the convert plugin as described at http://wiki.dovecot.org/Plugins/Convert (except with mail_location = maildir:~/Mail) It fails with an error message: Eopen(/.temp.falcon.endbracket.net.18618.8d5e0a038da6cf06) failed: Permission denied Error: imap dump-capability process returned 89 It looks like Dovecot execs /usr/libexec/dovecot/imap, which drops root privileges (probably via get_imap_capability), then loads /usr/lib/dovecot/imap/lib01_convert_plugin.so, which tries to create a file in the root directory, which it obviously won't have write privileges on. I'm running dovecot-1.0-1.2.rc15.el5 on CentOS 5. If I change the paths from ~ to /home/%u, I get this error message: Emkdir_parents(/home/dump-capability/mail) failed: Permission denied

2 1

[Dovecot] Postfix & Dovecot LDA
by tomzu＠buu.lv 17 Jan '08

17 Jan '08

Hi, I was using Dovecot (POP3,IMAP+quotas) with postfix quota "addon". But the postfix's quotas were reported differently and the quota file gets messed up all the time. So now I have also Dovecot's LDA, and everything works like charm... but... Now postfix can pass only one mail at a time to LDA. And that slows down delivery. Postfix master file: dovecot unix - n n - - pipe flags=DRhu user=vmail:vmail argv=/usr/local/libexec/dovecot/deliver -f ${sender} -d ${recipient} Is there a way to pass more than one mail at a time?

1 0

[Dovecot] Deliver, sendmail, virtual users, and catch-all addresses
by Eric Loyd 17 Jan '08

17 Jan '08

I have spent a long time looking into this and can't find the answer I'm looking for, so I'm asking here. I'm cutting the example down to just the bare minimums. This is NOT my actual configuration, but is sufficient for asking this question: How can I use dovecot's deliver LDA to deliver to virtual users, but then have unknown virtual users fall back to catch-all addresses defined by sendmail? Background: * sendmail is the MTA. I do not wish to change this. * procmail is the default MDA. * deliver is set up per the dovecot documentation as another MDA. * mailertable is configured to send mydomain.com to dovecot:dovecot * SQL backend for user/passwords I have it working the way I want with the exception of catch-alls. I thought that it might work by adding @mydomain.com to virtusertable, but sendmail sees the "user not found" return from deliver as the MDA and bounces the mail to postmaster. So what I'm trying to accomplish is this: Mail from user(a)external.com to me(a)mydomain.com Deliver to me Mail from user(a)external.com to sales(a)mydomain.com (virtual) Deliver via deliver to sales(a)mydomain.com Mail from user(a)external.com to foobar(a)mydomain.com (invalid) Deliver to catchall - spam(a)otherdomain.com Can someone point me in the right direction. RTFM is fine if you'll tell me what FM to R, because I've run out of ideas... Thanks! -- Eric Loyd

2 1

[Dovecot] question about mysql authentication
by Chantal Rosmuller 17 Jan '08

17 Jan '08

Hi list, i use dovecot-1.0-1.2.rc15.el5 installed from rpm centos 5.0 I cant get mysql authetication working: this is my /etc/dove-mysql.conf ######dove-mysql.conf should look like this########## #db_host = 127.0.0.1 #db_port = 3306 db = postfix db_user = postfix db_passwd = secret db_client_flags = 0 default_pass_scheme = PLAIN password_query = SELECT password FROM mailbox WHERE username = '%u' user_query = SELECT '/var/vmail/%d/%n' as home, 'maildir:/var/vmail/%d/%n' as mail, 150 AS uid, 12 AS gid, concat('dirsize:storage=',quota) AS quota FROM mailbox WHERE username ='%u' AND active ='1' ####################ends here#################### When I use this conffile: ##############dovecot configured to work with virtual users############ base_dir = /var/run/dovecot/ protocols = imap pop3 imaps pop3s login_dir = /var/run/dovecot-login default_mail_env = mbox:/var/vmail/%d/%n log_timestamp = "%Y-%m-%d %H:%M:%S " log_path = /var/log/maillog mail_extra_groups = mail first_valid_uid = 150 last_valid_uid = 150 maildir_copy_with_hardlinks = yes auth = mysql_auth auth_userdb = mysql /etc/dovecot-mysql.conf auth_passdb = mysql /etc/dovecot-mysql.conf ####################################ends here###################### i get this error: Error in configuration file /etc/dovecot.conf line 13: Unknown setting: userdb When I use this: ##############dovecot configured to work with virtual users############ base_dir = /var/run/dovecot/ protocols = imap pop3 imaps pop3s login_dir = /var/run/dovecot-login default_mail_env = mbox:/var/vmail/%d/%n log_timestamp = "%Y-%m-%d %H:%M:%S " log_path = /var/log/maillog mail_extra_groups = mail first_valid_uid = 150 last_valid_uid = 150 maildir_copy_with_hardlinks = yes auth = mysql_auth passdb sql { args = /etc/dovecot-mysql.conf } userdb sql { args = /etc/dovecot-mysql.conf } ####################################ends here###################### i get the following error: Starting Dovecot Imap: Error: Error in configuration file /etc/dovecot.conf line 13: Unknown section type What is the correct syntax? Thank you

3 5

[Dovecot] Dovecot installation with openldap shared libraries at Solaris 10
by Dovecot Jami 17 Jan '08

17 Jan '08

Hi, I am installing dovecot-1.0.10 on Solaris 10 with LDAP support. I know that Solaris LDAP is broken and so I install openldap-2.3.35. My openldap-2.3.35 shared lib files are at /usr/local/lib/ and /usr/local/include/. Barkley DB version is 4.2. Now I am configuring dovecot to use openldap as follows, PATH=$PATH:/usr/sfw/bin:/usr/ccs/bin export PATH LDFLAGS="-L/usr/local/BerkeleyDB.4.2/lib -R/usr/local/BerkeleyDB.4.2/lib -L/usr/local/lib -R/usr/local/lib" ./configure --with-ldap make make install After installation it shows the same Solaris broken LDAP error message as below, dovecot: [ID 107833 mail.error] auth(default): LDAP: Buggy LDAP library returned wrong fd: 1 dovecot: [ID 128275 mail.error] Auth process died too early - shutting down Pls help me. Rgds, Mahmud Jami --------------------------------- Be a better friend, newshound, and know-it-all with Yahoo! Mobile. Try it now.

1 0

[Dovecot] Regarding the UIDLIST
by Kjartan Andreassen 17 Jan '08

17 Jan '08

Hi, I wonder if the UID's in the UIDLIST will ever change for a given email? Eg with courier it is recreated sometimes, but can i 100% rely on that the UIDs will never change? Or is there anything else i can rely on that will never change? The reason I'm asking is that i want to link certain tasks etc etc to an email, and the only way to get a unique link is that if the uidlist or something else unique never changes. Thank you. -- Kjartan

1 0

[Dovecot] Dovecot at Solaris 10 with LDAP : Buggy LDAP library returned wrong fd: 1
by Dovecot Jami 17 Jan '08

17 Jan '08

Hi, I installed Dovecot-1.0.10 at my Solaris 10 with LDAP support. It runs fine without LDAP. But when I configured LDAP and start it, it shows the following error, dovecot: [ID 107833 mail.error] auth(default): LDAP: Buggy LDAP library returned wrong fd: 1 dovecot: [ID 128275 mail.error] Auth process died too early - shutting down Pls help me to solve this. Rgds, Mahmud Jami --------------------------------- Looking for last minute shopping deals? Find them fast with Yahoo! Search.

4 7

Re: [Dovecot] Dovecot With cygwin
by Jaspreet Singh 17 Jan '08

17 Jan '08

I googled around web and found http://www.dovecot.org/list/dovecot/2004-December/005665.html by Johannes Berg that has a patch for dovecot + cygwin. but that does not work. Does anybody successfully compiled and running dovecot on windows XP + cygwin 5.1. ____________________________________________________________________________________ Never miss a thing. Make Yahoo your home page. http://www.yahoo.com/r/hs

2 1

[Dovecot] Please remove me
by Mike McGonagle 16 Jan '08

16 Jan '08

Hello Mr List Administrator, I have tried to remove myself from this list, but for some reason, these requests are being ignored, and I am still receiving these mailings. Could someone in charge PLEASE remove me email address from this list? Thank you, Michael McGonagle

1 0

[Dovecot] Quota per domain
by Michel Bulgado 16 Jan '08

16 Jan '08

Hi People I have a two questions I use dovecot 1.0.10 I have quota maildir 1- I want to use the last version of quota 1.1 in my dovecot , i have to patch then, so which file i have to apply ? http://dovecot.org/patches/1.0/ this one quota-rewrite-1.0.9.diff ??? my another question : 2- with the new quota (1.1) if is posible define a quota per domain? %n(a)domain1.com = 100M %n(a)domain2.com = 0 --- no quota limit or @domain1.com = 100M @domain2.com = 0 --- no limit quota Once again , sorry for my english Thanks -------------------------------------------------------

1 0

[Dovecot] old master.pid prevents dovecot startup
by Michael 16 Jan '08

16 Jan '08

Summary ======= After an unclean shutdown the file /var/run/dovecot/master.pid remained behind. This prevented dovecot from starting, and gave a misleading error message. To be more resilient and fault-tolerant, I recommend that dovecot also check the validity of the PID in /var/run/dovecot/master.pid in order to determine whether or not another dovecot process is running. Detail ====== In testing out my automatic UPS shutdown I inadvertently shut down my system uncleanly ... oops! As the system rebooted, I saw that dovecot did not start properly, with an error message: Fatal: Invalid configuration in /etc/dovecot.conf After the system came up, I tried to start dovecot manually. Turns out that there was an invalid PID in /var/run/dovecot/master.pid ----- [root@mykiss5 mth]# service dovecot start Starting Dovecot Imap: Error: Dovecot is already running with PID 1965 (read from /var/run/dovecot/master.pid) Fatal: Invalid configuration in /etc/dovecot.conf [FAILED] [root@mykiss5 mth]# ps 1965 PID TTY STAT TIME COMMAND [root@mykiss5 mth]# rm /var/run/dovecot/master.pid rm: remove regular file `/var/run/dovecot/master.pid'? y [root@mykiss5 mth]# service dovecot start Starting Dovecot Imap: [ OK ] [root@mykiss5 mth]# service dovecot stop Stopping Dovecot Imap: [ OK ] [root@mykiss5 mth]# service dovecot start Starting Dovecot Imap: [ OK ] [root@mykiss5 mth]# dovecot --version 1.0.7 [root@mykiss5 mth]# ----- This leads me to believe that dovecot is only checking for the existance of /var/run/dovecot/master.pid. It seems to me that it would be more fault-tolerant if it also checked the validity of the PID that is in /var/run/dovecot/master.pid. Michael

2 2

Re: [Dovecot] deliver can't connect to auth server at */usr/local*/var/run/dovecot/auth-master
by Jerry Yeager 16 Jan '08

16 Jan '08

> > > Message: 8 > Date: Tue, 15 Jan 2008 15:19:11 +0100 > From: Andreas Ntaflos <daff(a)dword.org> > Subject: Re: [Dovecot] deliver can't connect to auth server at > */usr/local*/var/run/dovecot/auth-master > To: dovecot(a)dovecot.org > Message-ID: <200801151519.11951.daff(a)dword.org> > Content-Type: text/plain; charset="utf-8" > > On Tuesday 15 January 2008 03:56:28 Jerry Yeager wrote: >>> while fiddling around with the configuration so Dovecot's LDA >>> "deliver" can be >>> used by multiple users by means of Getmail (you can read about that >>> in [1]) I >>> always end up running into the error message posted in the subject >>> line: ( stuff snipped out ) >> One last thing, as a security idea, try something like >> >> master { >> path = /usr/local/var/run/dovecot/auth-master >> mode = 0600 >> user = dovecot_user >> group = dovecot_group >> } >> >> and set your postfix line that calls deliver to match: >> >> dovecot unix - n n - - pipe flags=DRhu >> user=dovecot_user:dovecot_group argv=/usr/local/libexec/dovecot/ >> deliver -f ${sender} -d ${recipient} > > Thanks for this suggestion! But that would imply that I have a > virtual user > setup, wouldn't it? Because I don't, all my users are regular Unix > users with > shell accounts. That's why my Postfix main.cf contains just > > home_mailbox = Maildir/ > mailbox_command = /usr/local/libexec/dovecot/deliver > > which is also what the LDA/Postfix wiki page says on > wiki.dovecot.org. No > Dovecot entry in master.cf at all. > Actually I was responding to what you had listed in your message i.e. socket: type: listen client: path: /var/spool/postfix/private/auth mode: 432 user: postfix group: postfix master: path: /var/run/dovecot/auth-master mode: 432 user: root group: dovecot -- which is a setup type you would use in a virtual style of user (either a "super user" or a group of non-system listed users with different uids / gids) setup . I had not encountered your other postings until later. Jerry > And, as also mentioned elsewhere in this thread, until yesterday I > didn't even > have the master { ... } section uncommented, and no auth-master > socket seems > to have been configured. But then again I only delivered through > Postfix and > didn't need to have deliver called by a regular user. > > Andreas > -- > Andreas "daff" Ntaflos > Vienna, Austria > > GPG Fingerprint: 6234 2E8E 5C81 C6CB E5EC 7E65 397C E2A8 090C A9B4 >

1 0

[Dovecot] Keep pop messages, is it possible?
by "Fábio M. Catunda" 15 Jan '08

15 Jan '08

Hi! I would like to find a way to not delete messages when they are downloaded via pop3, is that possible with dovecot? Gmail do this, I dont know how they mark messages that have been downloaded to avoid clients to download it again, but it looks like a good resource! Thanks for the help!

3 3

Re: [Dovecot] deliver can't connect to auth server at */usr/local*/var/run/dovecot/auth-master
by Jerry Yeager 15 Jan '08

15 Jan '08

> > ------------------------------ > > Message: 7 > Date: Tue, 15 Jan 2008 00:21:02 +0100 > From: Andreas Ntaflos <daff(a)pseudoterminal.org> > Subject: [Dovecot] deliver can't connect to auth server at > */usr/local*/var/run/dovecot/auth-master > To: dovecot(a)dovecot.org > Message-ID: <200801150021.02689.daff(a)pseudoterminal.org> > Content-Type: text/plain; charset="us-ascii" > > Hello list, > > while fiddling around with the configuration so Dovecot's LDA > "deliver" can be > used by multiple users by means of Getmail (you can read about that > in [1]) I > always end up running into the error message posted in the subject > line: > > Jan 15 00:00:02 HOSTNAME deliver(USERID): Can't connect to auth server > at /usr/local/var/run/dovecot/auth-master: Permission denied > > Notice how it says "/usr/local/var/run/dovecot"! How and why does > dovecot > ^^^^^^^^^^ > think that anything of any importance can be found under /usr/local/ > var/... ? > Please see dovecot -n at the end of this message, but as far as I > can tell I > > master: > path: /var/run/dovecot/auth-master > mode: 432 > user: root > group: dovecot > -- > Andreas "daff" Ntaflos > Vienna, Austria > For the quick answer to your immediate problem / question, try: cd /path/to/dovecot's/deliver (probably /usr/local/libexec/dovecot/ ) chmod u+s deliver (enable the setuid bit for the deliver app). Your Getmail app may not be truly running as root and thus does not really have permission to do what you want. you may need to do the same for the group as well Unix permissions are weird sometimes, like a $100 television tube that protects a 50 cent fuse by blowing first. It does look like (from your use of /usr/local/*****) you built dovecot to run out of /usr/local. One last thing, as a security idea, try something like master { path = /usr/local/var/run/dovecot/auth-master mode = 0600 user = dovecot_user group = dovecot_group } and set your postfix line that calls deliver to match: dovecot unix - n n - - pipe flags=DRhu user=dovecot_user:dovecot_group argv=/usr/local/libexec/dovecot/ deliver -f ${sender} -d ${recipient} (try to have dovecot run as an unprivileged user as much as you can)

2 1

[Dovecot] Dovecot With cygwin
by Jaspreet Singh 15 Jan '08

15 Jan '08

Hi This is jesse. I am running exim as my mail server on cygwin. But i need imap/pop3 for accessing mail. I found that dovecot works on cygwin with some code change. So can i know how to compile dovecot on cygwin. This is important ANYBODY ____________________________________________________________________________________ Be a better friend, newshound, and know-it-all with Yahoo! Mobile. Try it now. http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ

2 2

[Dovecot] setgid fails
by Anil 14 Jan '08

14 Jan '08

I am using LDA/Sendmail. 20080113 version of dovecot. Jan 14 08:52:18 vds5 deliver(admin(a)domain.com): [ID 308812 mail.crit] setgid(10002) failed with euid=1, egid=1: Not owner

2 2

[Dovecot] Maildir handling
by Sascha Holzleiter 14 Jan '08

14 Jan '08

Hi, we just setup a new mailserver for our company with some sieve filtering in place. Everything works as expected but there is one flaw. We setup the per user sieve filters in files within the users mailbox maildir as follows: lrwxrwxrwx 1 mail mail 21 Jan 13 17:20 .dovecot.sieve -> sieve/phpscript.sieve This link is actually picked up by dovecot and being announced as an IMAP folder which gives an error in certain MUAs as they try to access it. Is there a way to let dovecot check if the link is really a maildir, so lets say a directory with a maildirfolder file within it? Or just to hide this link from dovecot so its not advertised as an IMAP folder? Greetings, Sascha

3 3

[Dovecot] Unexplained MDA bounce backs
by Dean Manners 14 Jan '08

14 Jan '08

I have recently noticed that some of our internal mailer scripts are causing Dovecot-LDA to generate Mailer Delivery Subsystem messages. The following Dovecot-LDA message is generated: ---- Message body ---- Your message was automatically rejected by Dovecot Mail Delivery Agent. The following reason was given: Unknown error ---- Message body ---- ---- Message header ---- Return-Path: <MAILER-DAEMON> Delivered-To: bounces@xxxxx Received: by mymachine.xxxxx (Postfix, from userid 5000) id 5772568300; Mon, 14 Jan 2008 18:00:56 +1100 (EST) Message-ID: <dovecot-1200294055-774265-0@mymachine> Date: Mon, 14 Jan 2008 18:00:55 +1100 From: Mail Delivery Subsystem <noreply@xxxxx> To: <bounces@xxxxx> MIME-Version: 1.0 Content-Type: multipart/report; report-type=disposition-notification; boundary="21506/mailfilter02" Subject: Automatically rejected mail Auto-Submitted: auto-replied (rejected) Precedence: bulk ---- Message header ---- Initially I thought these were being caused by Delivery-Receipt requests, however have since tested this and is not the case. I have tried to snoop through the logs (unfortunately on a very busy mail hub) using the Message-ID, however this doesn't seem to lead me back to the original message - only the MDA notification. I can only ascertain that its isolated to our scripts, as the bounces@ address is specifically used by them. Any ideas what would cause/trigger the "Unknown error" automatic rejects ? System config is -Postfix 2.3.4 with MySQL backend -Dovecot 1.0.rc26 with MySQL backend, using only deliver. All mail deliveries are otherwise fine. Regards __________________________________________ Dean Manners

2 1

Re: [Dovecot] Imap proxy with tls?
by Someone Something 14 Jan '08

14 Jan '08

offlineimap looks like it will work. Do you know if it works well on big changes? I have about 1.5 gigs of email at the local site that will need to be uploaded to the main server. After its uploaded it will have to weed through it all during the sync every time. Think that will be ok? Thanks > Asheesh Laroia wrote: > > On Sun, 13 Jan 2008, Someone Something wrote: > > > >> I have a server with dovecot installed with imap and tls working > (call > >> that the remote server). Now I want to have a few computers at the > same > >> place to access the same account on the remote server. I have another > >> server (call this the local server) at the local site to do this with > >> but am > >> not sure how to do it. The proxy setup > >> http://wiki.dovecot.org/PasswordDatabase/ExtraFields/Proxy looks > >> about right > >> but that does not seem to support tls? I need tls going from the local > >> server to the remote server. I want all emails on the remote server > >> to be > >> the same as on the local server. This way all clients at the local > site > >> have very fast access to email and can still get to the email when > >> not at > >> the local site. > > > > This is a little different from what you're doing, but let me tell you > > how I do the above: I run offlineimap on the "local server", and it > > syncs the changes to and from the "remote server". > > > > -- Asheesh. > > > > >

2 1

[Dovecot] Imap proxy with tls?
by Someone Something 14 Jan '08

14 Jan '08

Hello all, I have a server with dovecot installed with imap and tls working (call that the remote server). Now I want to have a few computers at the same place to access the same account on the remote server. I have another server (call this the local server) at the local site to do this with but am not sure how to do it. The proxy setup http://wiki.dovecot.org/PasswordDatabase/ExtraFields/Proxy looks about right but that does not seem to support tls? I need tls going from the local server to the remote server. I want all emails on the remote server to be the same as on the local server. This way all clients at the local site have very fast access to email and can still get to the email when not at the local site. Any suggestions? Thanks

2 1

[Dovecot] Indexes
by Daniel L. Miller 13 Jan '08

13 Jan '08

When something "bad" happens to the indexes, my e-mail client (Thunderbird) reports an "unable to succeed" error on opening a mailbox. Leaving that mailbox and coming back works fine. Is this expected behaviour? -- Daniel

3 6

[Dovecot] Custom 'quota exceeded' message + Sieve script from database
by Przemyslaw Wegrzyn 13 Jan '08

13 Jan '08

Hi! I'm quite new to Dovecot. helping my friend to migrate from Courier-IMAP to something more efficient, we are evaluating Dovecot at the moment. I had to prepare 2 small patches for Dovecot to suit our needs, and I've decided to post it here. I'm not fully familiar with Dovecot architecture yet, I'd appreciate if someone could look if these changes make sense (i.e. doesn't break anything). And of course, maybe someone is interested as well. 1. Customized "quota exceeded" message. http://czajnick.sitenet.pl/dovecot/dovecot_1.0.9_quota_exceeded_message.diff - quick hack to let me define custom message instead of typical "Quota exceeded", simply by using plugins { quota_exceeded_message = ... }. Browsing this mailing list I've seen some posts about such feature being implemented in Dovecot. Is it done in a similar way? Which stable version is the first to include this functionality? 2. Sieve filter modification http://czajnick.sitenet.pl/dovecot/dovecot_sieve_1.0.2_envscript_patch.diff In our systems we currently use a modified maildrop MDA that picks the filter script from the database instead of the file. This has proven useful - end-user's administration panel doesn't need any special permissions (or networking capabilities), as it doesn't need to access the filesystem - it is reduced to a plain database web-app. The patch above makes the delivery agent check for the sieve script present in SIEVE_SCRIPT environment variable. If this is the case, env var content is used instead of the script stored in a usual file pointed to by SIEVE variable. This makes it trivial to pass the script from the database using base dovecot functionality. A minor drawback of such solution is that the script is re-compiled on each delivery, but I don't think it takes much time to compile a few lines of a script using (f)lex/bison-or-yacc parser. Yes, I've noticed the sieve-manage patch, but I don't want the complexity of managing sieve script over the socket connection (if my understanding of the script is wrong, please correct me). BR, Przemyslaw

2 2

[Dovecot] do not lose mail when dovecot is dead
by Daniel 13 Jan '08

13 Jan '08

Hi! Recently I've experienced problems with dovecot. Dovecot died silently, what means is that there are no core files, nor any indication in the log files, just the "kevent(): Invalid argument" messages. Dovecot just died, so deliver could not connect to the auth-master socket, which means that messages couldn't been delivered. The problem is that postfix thought that the delivery was successful, and didn't place the message to delay, but deliver(LDA) couldn't deliver the message, so it got lost. An example: postfix/pickup[29619]: 8A1C6F261: uid=1001 from=<id> postfix/cleanup[19148]: 8A1C6F261: message-id=<20080107192402.8A1C6F261(a)domain.hu> postfix/qmgr[29441]: 8A1C6F261: from=<id(a)domain.hu>, size=585, nrcpt=1 (queue active) deliver(leva): Loading modules from directory: /usr/local/lib/dovecot/lda deliver(leva): Module loaded: /usr/local/lib/dovecot/lda/lib10_quota_plugin.so deliver(leva): Module loaded: /usr/local/lib/dovecot/lda/lib90_cmusieve_plugin.so deliver(leva): Can't connect to auth server at /var/run/dovecot/auth-master: Connection refused postfix/pipe[8582]: 8A1C6F261: to=<leva(a)domain.hu>, orig_to=<id>, relay=dovecot-lda, delay=1.7, delays=1.1/0/0/0 .68, dsn=2.0.0, status=sent (delivered via dovecot-lda service) postfix/qmgr[29441]: 8A1C6F261: removed See? Postfix removed it from the queue, so basically all bets are off, and everything depends on deliver, but it just dropped the message. Is there anything that can be done regarding this issue? Thanks! Daniel

6 10

[Dovecot] randomly disconnected with imap, and latest hg
by Daniel 12 Jan '08

12 Jan '08

Hi! I'm using latest hg from the 1.1 branch, and noticed that since yesterday's updates, dovecot randomly disconnects clients when using imap, with these message in the log: "Disconnected for inactivity in reading our output bytes=153/41319" This happens randomly. Eg. I'm fetching messages, and suddenly, dovecot disconnects. Or my MUA just sits there, and then again, dovecot disconnects me with this message. I didn't even do anything with the client, so I can't think of anything which could've been read. What could be the problem? Daniel

2 6

[Dovecot] Please help me resolve why mail isn't being delivered to virtual users
by Andrew Falanga 12 Jan '08

12 Jan '08

Hi, I have to admit that I'm not quite sure why no one has responded to me about this one. If I'm not providing enough information or incorrect information please tell me. It's quite important that this e-mail system be working. I do not quite understand what it is that I'm missing now. I have the need to setup and configure various users as virtual users. To this end, I've configured them so that their home directories are "/virtusers/<userid>" and their INBOXes are "/var/mail/<userid>." I have created a system user ID called "vmail" which is referenced in my PostgreSQL database for UID/GID stuff. All virtual user home directories and INBOXes are made owner "vmail" and group is "users." Originally, I had my sendmail "/etc/mail/aliases" file setup to "map" all mail sent to these virtual users to the system user "vmail." However, none of the virtual users were getting any mail and vmail was just getting swamped. After doing more digging, I found that I just didn't understand the home directories and INBOX, mbox and such. That's what drove me to configuring what's in there now. Now, following directions on this WIKI page: http://wiki.dovecot.org/LDA/Sendmail?highlight=%28deliver%29 I'm still unable to get the e-mail working for them. Continually, sendmail bails with errors saying it, "Can't create output." Because I am using *.mc files, I made a new *.m4 file as directed in /usr/share/sendmail/cf/mailer. Dovecot does allow the virtual users to login. In fact, when I did, the first time, there appears a "mail" directory in their home directories after login. This would indicate to me that the login was successful. Further, I cut/pasted a message sent to one of the virtual users from the vmail INBOX (/var/mail/vmail) into the virtual user's INBOX (/var/mail/jdunkin). Then, logged in as this virtual user and ACTUALLY got the mail. I know this stuff works. What must be done to make sendmail do its thing for deliver? What is necessary to fix this situation? Andy

12 42

[Dovecot] Allow_nets
by Evaggelos Balaskas 11 Jan '08

11 Jan '08

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 I use the allow_nets password extra field [0] for my users. Is there a way to use this functionality for ALL users, and not to edit my passwd-file every time a new user is added ? The alternative i am working for this is the TCP Wrappers. [0]: http://wiki.dovecot.org/PasswordDatabase/ExtraFields/AllowNets -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.8 (MingW32) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iEYEARECAAYFAkd7ZzIACgkQWIK+Pe9twhrRDQCgjui9zyG67n6kA5I1Lf+0efvg cvIAoMe7+gniwfbZdFGh8UERtuw7IG0K =KKQk -----END PGP SIGNATURE-----

2 2

[Dovecot] Dovecot-imap, tls, gnus
by Richard G Riley 11 Jan '08

11 Jan '08

I have a connection to my dovecot server from gnus: ,---- | (add-to-list 'gnus-secondary-select-methods | '(nnimap "hermes" | (nnimap-stream starttls) | (nnimap-address "hermes") | (nnimap-authinfo-file "~/.authinfo"))) `---- If I enter a group and read my mail then wander off and come back after a few minutes I can not navigate out of the group because my nnimap session has ended. What config parameter do I need to change in Dovecot to keep it open for the life of the client? (I am assuming its a dovecot issue here since it didn't happen with courier-imap).

3 5

[Dovecot] Problem: "Missing IMAP reply key: F"
by Claus Atzenbeck 11 Jan '08

11 Jan '08

Hi all: I installed dovecot v1.0 (on Mac OS X) and want to connect to is on localhost via Pine or Alpine, but it fails. Pine's debug mode tells me the following: ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Debug output of the Pine program (debug=2 debug_imap=4). Version 4.64 (OSX) [...] Terminal type: screen About to open folder "INBOX" inbox is: "INBOX" IMAP 14:40:22 1/11 mm_log babble: Trying IP address [::1] IMAP 14:40:22 1/11 mm_log warning: Connection failed to localhost,143: Connection refused IMAP 14:40:22 1/11 mm_log babble: Trying IP address [127.0.0.1] IMAP DEBUG 14:40:22 1/11: F IMAP 14:40:22 1/11 mm_notify warning: {localhost}inbox: Missing IMAP reply key: F IMAP 14:40:22 1/11 mm_notify bye: {localhost}inbox: [CLOSED] IMAP connection broken (server response) IMAP 14:40:22 1/11 mm_log error: [CLOSED] IMAP connection broken (server response) ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ I use the options "disable_plaintext_auth = no" and "ssl_disable = yes", because I don't need encryption. (I only access the server from localhost.) What does "Missing IMAP reply key: F" mean? Any easy way to solve the problem? Thanks for any hint! Claus

2 1

[Dovecot] Automatically subscribe to folder?
by Christian Flothmann 11 Jan '08

11 Jan '08

Hello everybody, i am filtering e-mails using the cmusieve-plugin. A global script filters all mails tagged by SpamAssasin and moves them into the folder Spam: if header :is "X-Spam-Flag" "YES" { fileinto "Spam"; } My problem is that users who did not had a folder Spam until the first time of filtering a spam mail are not automatically subscribed to this new created folder. They have to do this step manually in their mail client. Is it possible to automate this script and subscribe the account to this folder when it is created by the sieve script? Regards, Christian

7 14

[Dovecot] Test Environment Question
by Stewart Dean 11 Jan '08

11 Jan '08

I have my master IMAP server running DC V1.0.10. The homedir and INBOXdir are physically resident there and NFS exported (no caching) to 3 other machines. I have installed V1.1beta13 on one of them (which thus accesses the homedir/INBOXdir remotely) and plan to have a limited community test-drive it there. Are there any hazards or drawbacks in doing this? While the homedirs and INBOXdirs are thus shared, I have it so that each machine has its own local index directory and /var/run dir. Comments or dire warnings?

4 3

Re: [Dovecot] deliver triggering SELinux AVC denials
by greno＠verizon.net 11 Jan '08

11 Jan '08

>From: Timo Sirainen <tss(a)iki.fi> >Date: 2008/01/01 Tue PM 09:18:05 CST >To: Gerry Reno <greno(a)verizon.net> >Cc: dovecot(a)dovecot.org >Subject: Re: [Dovecot] deliver triggering SELinux AVC denials ... >Set dotlock_use_excl=yes to see what file it's really wanting to create. Ok, did that. And looking at all the alerts it appears to be any file that deliver is trying to write under /home/vmail. My users are all virtual and they all exist like: /home/vmail/example.com/john typical permissions: -rw------- 1 vmail vmail 464 2008-01-01 20:06 dovecot.index.log but for some reason even though deliver is setup to run as vmail:vmail it is still having permission problems. dovecot unix - n n - - pipe flags=DRhu user=vmail:vmail argv=/usr/libexec/dovecot/deliver -d ${recipient} ???? Gerry

2 1

[Dovecot] number of auth process
by Jorge Salamero Sanz 11 Jan '08

11 Jan '08

hi there, what are exactly the differences between auth_worker_max_count = 30 and auth default { count = 1 } ? first are threads (for threaded auth methods) and second the number of process ?

3 2

[Dovecot] [dovecot][configure] docdir option lost
by Guth 11 Jan '08

11 Jan '08

Hi, While building dovecot-1.0.10 i've a trouble with --docdir configure option. It seems this option overload is "lost" during makefiles recurse generation (i didn't check others overload). Following are config.log and Makefiles cuts : ------------------- $ grep docdir dovecot-1.0.10/config.log dovecot-1.0.10/Makefile dovecot-1.0.10/doc/Makefile dovecot-1.0.10/doc/wiki/Makefile dovecot-1.0.10/config.log: $ ./configure --prefix=/usr --with-gssapi --with-ldap --with-sql --with-mysql --sysconfdir=/etc --localstatedir=/var --mandir=/usr/man --with-docs --docdir=/usr/doc/dovecot-1.0.10 dovecot-1.0.10/config.log:docdir='/usr/doc/dovecot-1.0.10' dovecot-1.0.10/Makefile:docdir = /usr/doc/dovecot-1.0.10 dovecot-1.0.10/doc/Makefile:docdir = $(datadir)/doc/dovecot dovecot-1.0.10/doc/wiki/Makefile:docdir = $(datadir)/doc/dovecot ------------------- I'll correct it in a dirty way (sed is my friend after Makefiles creation) because i want it built quickly, but i guess it shouldn't be hard to avoid this problem in futures releases. -- Guth

2 1

[Dovecot] virtual domains/users and LDAP
by Anil 11 Jan '08

11 Jan '08

I have two suffixes in LDAP with users, e.g. ou=People, o=example.com ou=People, o=somethingelse.com I have the following two users: dn: uid=test1, ou=People, o=example.com uid: test1 mail: test(a)gmail.com dn: uid=test2, ou=People, o=somethingelse.com mail: test(a)yahoo.com uid: test2 The users login to IMAP as: test1(a)examle.com and test2(a)somethingelse.com. Here's an (excerpt) of the dovecot.conf file I am using: auth_bind = yes base = ou=People,o=%d scope = onelevel pass_attrs = mail=user pass_filter = (uid=%n) userdb static { args = uid=vmail gid=vmail home=/var/mail/apps/%d/%n } The problem I am seeing when the user logs in, the home dir is getting created incorrectly: Jan 3 14:08:12 vds5 dovecot: [ID 107833 mail.info] imap-login: Login: user=<test(a)gmail.com>, method=PLAIN, rip=, lip= Jan 3 14:08:12 vds5 dovecot: [ID 107833 mail.info] IMAP(test(a)gmail.com): Effective uid=500, gid=500, home=/var/mail/apps/gmail.com/test Jan 3 14:08:12 vds5 dovecot: [ID 107833 mail.info] IMAP(test(a)gmail.com): maildir: data=/var/mail/apps/gmail.com/test/Maildir ... I was expecting it to create the home dir under: /var/mail/apps/example.com/test1, since that is what they are logging in with. Any ideas? I am actually surprised that it even let me login with this configuration, something looks odd in this setup. :) Thanks, Anil

2 1

[Dovecot] %d not recognized with LDAP
by Anil 11 Jan '08

11 Jan '08

I saw the recent threads but didn't help for me. Here's my configuration: The domain isn't getting expanded as per logs: Jan 4 08:06:40 vds5 dovecot: [ID 107833 mail.info] IMAP(admin): maildir: data=/var/mail/apps//admin/Maildir # 20080102: /usr/local/dovecot/etc/dovecot.conf listen: *:143 ssl_disable: yes disable_plaintext_auth: no login_dir: /usr/local/dovecot/var/run/dovecot/login login_executable: /usr/local/dovecot/libexec/dovecot/imap-login login_log_format_elements: user=<%n@%d> method=%m rip=%r lip=%l %c login_max_connections: 64 max_mail_processes: 128 mail_location: maildir:/var/mail/apps/%d/%n/Maildir mail_debug: yes auth default: passdb: driver: ldap args: /usr/local/dovecot/etc/dovecot-ldap.conf userdb: driver: static args: uid=vmail gid=vmail home=/var/mail/apps/%d/%n Here's the relevant LDAP configuration: auth_bind = yes pass_attrs = uid=user pass_filter = uid=%n I tried setting the mail_location to: maildir:~/Maildir and explicitly specifying the full path, but still the Maildir is getting created with out the %d. Of course, the user is logging in with "admin(a)domain.com". Any ideas?

4 5

[Dovecot] Problems with AUTH=PLAIN in pop3
by Maykel Moya 11 Jan '08

11 Jan '08

I'm using Dovecot (1.0.10) locally to test SugarCRM. When I tried to set up a mail account in Sugar, it complains with -- SECURITY PROBLEM: insecure server advertised AUTH=PLAIN Please check your settings and try again. -- don't know if that behaviour is a bug or a feature of php-imap. The case is that I'm unable to set up the mail account in Sugar. Timo answered to me on IRC about Dovecot assuming that a connection from the same ip is considered secured. I'd rebuild Dovecot with the following patch: --- dovecot-1.0.10/src/pop3-login/client.c.orig 2008-01-05 00:44:14.000000000 -0500 +++ dovecot-1.0.10/src/pop3-login/client.c 2008-01-05 00:44:30.000000000 -0500 @@ -331,7 +331,7 @@ client->created = ioloop_time; client->refcount = 1; client->common.tls = ssl; - client->common.secured = ssl || net_ip_compare(ip, local_ip); + client->common.secured = ssl; client->common.local_ip = *local_ip; client->common.ip = *ip; --- but still not able to make it not accept AUTH PLAIN authentication from the same ip. I'm missing something? On the other hand, if I set disable_plaintext_auth to yes I cannot use the classic USER/PASS pop3 verbs. I'm not sure what the POP3 related RFCs mandates with respect to this. Regards, maykel

2 1

[Dovecot] Imap assertion (dovecot-1.1.beta13)
by Nuno Lopes 11 Jan '08

11 Jan '08

Hi, I continue testing the beta versions and have seen a great improvement over the last few ones. On beta13 I'm seeing the following assert on some client folders: file index-mail.c: line 759 (index_mail_stream_destroy_callback): assertion failed: (mail->data.destroying_stream) If you need I can try and reproduce this in a more controled environment to pinpoint the problem. Thanks, -- Nuno Lopes

2 4

[Dovecot] [debian] Etch Packages Available for v1.0.10
by Brian T Glenn 10 Jan '08

10 Jan '08

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Compiled only for i386 with source package available. deb http://debian.delink.net/ etch-delink main deb-src http://debian.delink.net/ etch-delink main Cheers, - -- Brian T Glenn http://www.delink.net/ -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.6 (GNU/Linux) iD8DBQFHfcGYFy/L+4MovqIRAgJUAJ4/fcaLb/Cyeo8s42EnAOu5MZr4CgCdGgBK 2RuF/zkrGBsQzElZSBJBCaI= =dGHp -----END PGP SIGNATURE-----

3 3

[Dovecot] Too many open files
by Andrew Hutchings 10 Jan '08

10 Jan '08

Hi Guys, Just got this on one of my test72 dovecot servers: - Jun 10 12:40:28 svr21 dovecot: auth(default): net_connect_unix(/var/run/dovecot/auth-worker.18818) failed: Too many open files Jun 10 12:40:28 svr21 dovecot: pop3-login: Disconnected: method=PLAIN, rip=xxx.xxx.xxx.xxx, lip=xxx.xxx.xxx.xxx Jun 10 12:40:28 svr21 dovecot: pop3-login: Disconnected: method=PLAIN, rip=xxx.xxx.xxx.xxx, lip=xxx.xxx.xxx.xxx Jun 10 12:40:28 svr21 dovecot: child 18818 (auth) returned error 89 Jun 10 12:40:29 svr21 dovecot: Auth process died too early - shutting down Jun 10 12:40:29 svr21 dovecot: auth(default): mysql: Connected to localhost (maildb) Jun 10 12:40:29 svr21 dovecot: auth(default): net_connect_unix(/var/run/dovecot/auth-worker.13784) failed: No such file or directory Jun 10 12:40:29 svr21 dovecot: child 13784 (auth) returned error 89 - Is dovecot leaving files open? Or is it a large mailbox? Regards Andrew -- Andrew Hutchings (A-Wing) Linux Guru - Netserve Consultants Ltd. - http://www.domaincity.co.uk/ Admin - North Wales Linux User Group - http://www.nwlug.org.uk/ BOFH excuse 122: because Bill Gates is a Jehovah's witness and so nothing can work on St. Swithin's day.

5 5

[Dovecot] Switch from courier to dovecot
by Richard G Riley 10 Jan '08

10 Jan '08

I have an courier IMAP server running. To get sib dirs working I had to rename them all to begin with a period ".". e.g Maildir Maildir/{cur,new,tmp} Maildir/.account1/{cur,new,tmp} Maildir/.account2/{cur,new,tmp} Maildir/.account3/{cur,new,tmp} etc If I uninstall Courier and install dovecot, will these "period" dirs be seen by default? I am fairly new to this and sometimes it seems that Maildir format requirements vary a lot depending on client or server. Thank you for your help.

3 2

Re: [Dovecot] Per user mailbox quota
by Ranjith Kumar 10 Jan '08

10 Jan '08

I have read the links and where can I mention these extra fields (in /etc/passwd file??). Thanks BAT Message: 2 Date: Wed, 09 Jan 2008 16:47:05 +0100 From: Luuk <dovecot(a)vosslamber.nl> Subject: Re: [Dovecot] Per user mailbox quota To: Dovecot Mailing List <dovecot(a)dovecot.org> Message-ID: <1199893625.5147.0.camel(a)opensuse.vosslamber.nl> Content-Type: text/plain On Wed, 2008-01-09 at 19:19 +0530, Ranjith Kumar wrote: > Hi, > > How do I setup per user mailbox quota? I am using /etc/passwd database. > > Thanks > BAT > >read this: >http://wiki.dovecot.org/Quota >and this: >http://wiki.dovecot.org/UserDatabase/ExtraFields >and you should know, how to do this.... greetings, Luuk

1 0

[Dovecot] Too many open files
by Harrison Metzger 10 Jan '08

10 Jan '08

Hello, I have dovecot installed and it works for about 3 hours then I get this error (in /var/log/maillog): Jan 8 08:42:53 stu dovecot: auth(default): pam(grossmsm,69.131.100.47): pipe() failed: Too many open files I set pam_limits.so to allow the user 'dovecot' to have 8192 open files, and I also changed: login_process_size = 512 However, it still wont work for more than a few hours. When I run: lsof -p `ps -o pid= -C dovecot-auth` I get: [...] dovecot-a 1385 root 248u sock 0,5 374241289 can't identify protocol dovecot-a 1385 root 249u sock 0,5 374241391 can't identify protocol dovecot-a 1385 root 250u sock 0,5 374243642 can't identify protocol dovecot-a 1385 root 251u sock 0,5 374241701 can't identify protocol [...] And the number followed by a u keeps growing. As of writing this email that number is now at 274u. Is dovecot not closing its fd's or something? Harrison Metzger

2 2

[Dovecot] OT: ctimes
by Jeff Grossman 10 Jan '08

10 Jan '08

I am going to convert my 32-bit Debian system to a 64-bit Debian system today. But, after I move my maildir files over to the new hard drive the ctimes are going to get modified to current time and mess up my automatic purge scripts for the Deleted Items folders. Is it possible for me to either keep the existing ctimes or is it possible for me to modify the ctimes to the date headers of the emails after I move the files? Thanks, Jeff

2 1

[Dovecot] Dovecot indexing questions
by Asheesh Laroia 10 Jan '08

10 Jan '08

I was playing with Dovecot 1.1 full text indexing through Squat in late October, which was working pretty well. I wanted to ask about this behavior I had: When an email arrives in INBOX using procmail (which delivers to my Maildirs), and I see it in Dovecot, when I next do a search (IMAP SEARCH TEXT) of that folder, the search takes a long time. Successive searches are lickety-split. My question is: Can there be an option to "index greedily"? As soon as Dovecot sees the message, I'd like it to update the Squat index. That way, searches are always fast. I guess this implies a small performance hit - namely, that my IMAP server spends CPU and disk time indexing every message at the first time it is seen rather than being able to do batch indexing each time SEARCH TEXT is issued. But when I think about that, that sounds like the server can waste its time so I don't waste mine - which is exactly why I like these computing machines! (That, and because I can waste my time programming them.) -- Asheesh. -- Use extra care when cleaning on stairs.

2 1

[Dovecot] Logging to stderr
by Abhijit Hoskeri 10 Jan '08

10 Jan '08

Hi, I am having a bit of a problem with logging to stderr. I am trying to run dovecot as sort of "inetd" install using daemontools. I have daemontools 'services' named dovecot-pop3, dovecot-imap, etc. The service command line looks like tcpsvd -c20 -v -l 0 0 110 /usr/lib/dovecot/pop3-login [--ssl] In dovecot/dovecot.conf, the log_path is set to /dev/stderr. What seems to be happening is that all the log lines (regardless of service) go to the log file of which ever service was first used. Exactly how are these logs written? Is it possible to (easily) make the login process write to its own stderr? Thanks, -Abhijit

2 1

[Dovecot] Trash plugin in 1.0.x
by Ralf Hildebrandt 10 Jan '08

10 Jan '08

Does the Trash plugin in 1.0.x log it's dirty deeds somehow? I'd like to see that it works :) -- Ralf Hildebrandt (Ralf.Hildebrandt(a)charite.de) plonk(a)charite.de Postfix - Einrichtung, Betrieb und Wartung Tel. +49 (0)30-450 570-155 http://www.arschkrebs.de Arguing with good advice will result in lack of good advice. -- Victor Duchovni

2 1

[Dovecot] Per user mailbox quota
by Ranjith Kumar 10 Jan '08

10 Jan '08

Hi, How do I setup per user mailbox quota? I am using /etc/passwd database. Thanks BAT

3 2

[Dovecot] Sendmail, procmail, dovecot and quota
by papi mac 10 Jan '08

10 Jan '08

I have Fedora 7 from a standard installation running sendmail, procmail and dovecot 1.0 installed on a single partition. I now need to set up mail quotas for most of the users but not all. Just protecting /var/spool/mail/$LOGNAME is probably good enough for me. Since I just want mail quotas and the installation is on just 1 partition I don't have an easy way to use file system quotas. By reading through the dovecot documentation and list archives I have the feeling that this is possible with the versions and setup I have. I would probably need a main line like this (apart from other lines) per user mailbox that needs to be managed: dirsize:/var/spool/mail/joe-user:storage 10240 to give joe-user a 10 mb limit. Since this server is in production I don't have the luxury of experimenting (extensively) on it. I have a question though that I have not been able to answer yet. If the flow of mail goes from sendmail to procmail to the mailbox, how is it possible for dovecot to implement quotas on the inbox? Or would dovecot write something there that procmail has to honor? Is dovecot the way to do this? Am I misunderstanding what "quotas" mean in dovecot? Thanks for any clues. --------------------------------- Looking for last minute shopping deals? Find them fast with Yahoo! Search.

4 7

[Dovecot] maildir_uidlist_create assertion failure
by Andrew Garner 10 Jan '08

10 Jan '08

I've been getting the following error fairly often, which tends to result in a corrupted dovecot-uidlist. dovecot: IMAP(example(a)example.com): file maildir-uidlist.c: line 1009 (maildir_uidlist_recreate): assertion failed: (file_size == (uoff_t)st.st_size) dovecot: IMAP(example(a)example.com): Raw backtrace: imap [0x80cb740] -> imap [0x80cb64a] -> imap [0x8070e58] -> imap(maildir _uidlist_sync_deinit+0xe8) [0x8072d18] -> imap [0x806e9e2] -> imap(maildir_storage_sync_init+0x66) [0x806edf6] -> imap(imap_sync_init+0x4a) [0x80657da] -> ima p(cmd_sync+0x9d) [0x806590d] -> imap(cmd_store+0x33d) [0x805e1ed] -> imap(cmd_uid+0x57) [0x805e737] -> imap [0x805f009] -> imap [0x805f0ae] -> imap(client_inp ut+0x65) [0x805f6c5] -> imap(io_loop_handler_run+0x162) [0x80d3022] -> imap(io_loop_run+0x28) [0x80d2368] -> imap(main+0x4ab) [0x806723b] -> /lib/tls/i686/cmo v/libc.so.6(__libc_start_main+0xc8) [0xb7dfdea8] -> imap [0x8059551] dovecot: child 17997 (imap) killed with signal 6 dovecot: IMAP(example(a)example.com): rename(/home/vmail/domains/o/example.com/U/example/Maildir/dovecot-uidlist.…, /home/vmail/domains/o/example.com/U/example/Maildir/dovecot-uidlist) failed: No such file or directory dovecot: IMAP(example(a)example.com): unlink(/home/vmail/domains/o/example.com/U/example/Maildir/dovecot-uidlist.… failed: No such file or directory dovecot: IMAP(example(a)example.com): rename(/home/vmail/domains/o/example.com/U/example/Maildir/dovecot-uidlist.…, /home/vmail/domains/o/example.com/U/example/Maildir/dovecot-uidlist) failed: No such file or directory dovecot: IMAP(example(a)example.com): unlink(/home/vmail/domains/o/example.com/U/example/Maildir/dovecot-uidlist.… failed: No such file or directory Followed sometime later by: dovecot: IMAP(example(a)example.com): Invalid data in file /home/vmail/domains/o/example.com/U/example/Maildir/dovecot-uidlist Example of some corruption: ~/Maildir/dovecot-uidlist ... 7879 W193997 1195126451.4452.server023,S=191173:2,aopr :1195126451.4452.server023,S=191173:2,aopr ... 9628 W665454 1197354124.5254.server019,S=651976:2,pr <A0>% :1197354124.5254.server019,S=651976:2,pr # dovecot -n # 1.1.beta11: /etc/dovecot/dovecot.conf base_dir: /var/run/dovecot/ protocols: imap imaps pop3 pop3s login_dir: /var/run/dovecot/login login_executable(default): /usr/lib/dovecot/imap-login login_executable(imap): /usr/lib/dovecot/imap-login login_executable(pop3): /usr/lib/dovecot/pop3-login verbose_proctitle: yes mail_uid: 89 mail_gid: 89 mail_location: maildir:~/Maildir mail_debug: yes mmap_disable: yes mail_nfs_storage: yes mail_nfs_index: yes mail_executable(default): /usr/lib/dovecot/rawlog /usr/lib/dovecot/imap mail_executable(imap): /usr/lib/dovecot/rawlog /usr/lib/dovecot/imap mail_executable(pop3): /usr/lib/dovecot/pop3 mail_plugins(default): fts fts_squat mail_plugins(imap): fts fts_squat mail_plugins(pop3): mail_plugin_dir(default): /usr/lib/dovecot/modules/imap/ mail_plugin_dir(imap): /usr/lib/dovecot/modules/imap/ mail_plugin_dir(pop3): /usr/lib/dovecot/modules/ imap_client_workarounds(default): delay-newmail imap_client_workarounds(imap): delay-newmail imap_client_workarounds(pop3): pop3_uidl_format(default): %08Xu%08Xv pop3_uidl_format(imap): %08Xu%08Xv pop3_uidl_format(pop3): %f pop3_client_workarounds(default): pop3_client_workarounds(imap): pop3_client_workarounds(pop3): outlook-no-nuls oe-ns-eoh auth default: mechanisms: login plain cram-md5 digest-md5 username_format: %Lu verbose: yes debug: yes passdb: driver: sql args: /etc/dovecot/dovecot-sql.conf userdb: driver: sql args: /etc/dovecot/dovecot-sql.conf socket: type: listen client: path: /var/spool/postfix/private/auth user: postfix group: postfix master: path: /var/run/dovecot/auth-master user: vmail group: vmail plugin: quota: maildir quota_rule: *:storage=102400:messages=30000 fts: squat

5 9

[Dovecot] Dovecot auth GSSAPI
by Eduardo Sachs 09 Jan '08

09 Jan '08

Hi, I have Heimdal Kerberos with authentication in my Samba PDC, Postfix and OpenLDAP, it is perfect. But, I have problem with authentication GSSAPI of Dovecot. I install a service ticket of the form imap/mailserver.domain.com@REALM, imap/mailserver@REALM, pop/mailserver.domain.com@REALM and pop/mailserver@REALM and /etc/krb5.keytab for this services tickets. Debug in my messages log: Jan 9 15:14:32 mailserver dovecot: auth(default): client in: AUTH^I1^IGSSAPI^Iservice=IMAP^Ilip=192.168.0.71^Irip=192.168.0.212 Jan 9 15:14:32 mailserver dovecot: auth(default): gssapi(?,192.168.0.212): Obtaining credentials for imap@mailserver Jan 9 15:14:32 mailserver dovecot: auth(default): gssapi(?,192.168.0.212): While importing principal name: An invalid name was supplied Jan 9 15:14:33 mailserver dovecot: auth(default): client out: FAIL^I1^Itemp Jan 9 15:14:33 mailserver dovecot: imap-login: Aborted login: method=GSSAPI, rip=192.168.0.212, lip=192.168.0.71 Someone knows solve this problem? Or, it is a bug? Thanks!!!

1 0

[Dovecot] dovecot upgrade
by Paul A 08 Jan '08

08 Jan '08

Hi, I'm currently using Dovecot version 1.0 and I want to update it to the latest version. I know from version .99 to version 1.0 I had to change a few things on the dovecot config. When compiling the latest stable version should I just be able to use the same config I'm using for version 1.0 without making any changes ? Thank you Paul

3 3

[Dovecot] Dovecot too many open files???
by Tim Tyler 08 Jan '08

08 Jan '08

Dovecot experts, We just recently deployed Dovecot 1.0.rc15 on a Redhat 5 system. I have over 1400 users. At first it appeared to work fine. But soon, we had complaints of students that couldn't retrieve their email. I looked in the logs and found this error. Jan 7 22:27:31 stu dovecot: auth(default): pam(pucklisl,<http://144.89.40.6>144.89.40.6): pipe() failed: Too many open files We are running Dovecot to authenticate via pam which authenticates ldap. Below is the output of [root@stu ~]# dovecot -n # /etc/dovecot.conf listen: * ssl_cert_file: /etc/mail/certs/server.pem ssl_key_file: /etc/mail/certs/server.key login_dir: /var/run/dovecot/login login_executable(default): /usr/libexec/dovecot/imap-login login_executable(imap): /usr/libexec/dovecot/imap-login login_executable(pop3): /usr/libexec/dovecot/pop3-login login_process_size: 512 login_max_processes_count: 32 mail_location: mbox:%h/mail:INBOX=/var/spool/mail/%u mail_executable(default): /usr/libexec/dovecot/imap mail_executable(imap): /usr/libexec/dovecot/imap mail_executable(pop3): /etc/custom-pop3.sh mail_plugin_dir(default): /usr/lib/dovecot/imap mail_plugin_dir(imap): /usr/lib/dovecot/imap mail_plugin_dir(pop3): /usr/lib/dovecot/pop3 auth default: passdb: driver: pam userdb: driver: passwd Any solutions for this problem? Tim Tyler Network Engineer - Beloit College tyler(a)beloit.edu

2 3

[Dovecot] (somewhat ot?) purging old maildir messages
by Matt LaPlante 08 Jan '08

08 Jan '08

I'm using Dovecot (+postfix) to host some personal imap accounts on a private server (Maildir format). I've got one account that receives mostly automated mails, and I want to be able to purge messages beyond a given date (say 30 days). I know that since maildir uses flat files, I can literally just delete messages doing something similar to the following with bash: for i in $(find /var/spool/vmail/host1/user/cur/ -mtime +30); do rm $i done I dislike this approach for a few reasons. First, and most plainly, it seems crude. When running complex server software, its rarely a good idea in the field of systems administration to be bluntly deleting files out from under the running applications. It feels wrong. How does this affect dovecot's monitoring of the files and indexing? What if the files happen to be open in an email client? Etc. Emotions aside, I also very much dislike running an automated 'rm' that has the power to wipe out a lot of my email if something goes pearshaped with the script. I can think of several possible solutions that don't require subversive operations on the maildirs, but I've never used them and therefore don't know if they're actually feasible: - Use a tool designed to manipulate maildirs. Something akin to postfix's postqueue and postsuper tools come to mind, but I don't know if such an app exists. - Use a setting within dovecot that expires old maildir data. As I understand it this will be available in 1.1 (yay!); unfortunately that's not an option for me until 1.1 is available as stable in my server os. - Use a scriptable mua that has the capability to check mail under said account and automatically delete based on age. I know very little of tools in this area, so again I don't know if such an application exists. Any pointers you might have would be much appreciated. Thanks, Matt

4 4

[Dovecot] Problem with passwords surrounded by curly braces
by Frank Kintrup 08 Jan '08

08 Jan '08

Hello, one of my users set his password to something surrounded by curly braces, and promptly all access to his mailbox was refused. After looking through the logs I found an entry "Unknown password scheme xxxx", where "xxxx" is the user's password, but without the curly braces. I then browsed through the documentation and there was explained that it is possible to prefix the password with the password scheme in curly braces, like "{PLAIN}xxxx" where xxxx is the password itself. Manually altering the users password in the database to "{PLAIN}xxxx" (where "xxxx" is the user's password WITH curly braces) fixed this problem for me at this time, but the time a user chooses such a strange password I would have to edit the table again. So in my opinion the {SCHEME}-prefix is not a useful thing. Why would anyone need it, anyway? Shouldn't all passwords have the same scheme which is set in the dovecot.conf file once? If the feature is indeed used: with a database lookup it should be replaced by an optional database field or, if that's not possible, it should be possible to disable this feature from the config file. Frank

4 3

[Dovecot] What's the difference between mbox and maildir
by Andrew Falanga 08 Jan '08

08 Jan '08

I'm a little confused about some of these terms. What is: .imap/.imap/ (other than directories) mbox INBOX (I think I have this one) maildir ??????? I'm not sure how all of these things work together. Thanks, Andy

2 2

[Dovecot] Please help me resolve why mail isn't being delivered to virtual users
by Andrew Falanga 08 Jan '08

08 Jan '08

follow up: I forgot to mention, that I discovered my system doesn't appear to have procmail on it. So, I'm not sure what must be done for delivery of mail concerning that "LDA/Sendmail" dovecot WIKI page. Andy

1 0

[Dovecot] assertion with outlook
by Guenther Sommer 08 Jan '08

08 Jan '08

i saw two crashes in my syslog with dovecot, and google did not report any known problems. i have no problems using dovecot, thus bugreport is just for information. following information: ubuntu gutsy gibbon server amd64 ext3 outlook 2003 & 2007, just retrieving mails. mails have been migrated via imapsync 2 days before to this server. dovecot is imap-server and LDA. has been seen with two different users, following syslog entries: Jan 7 18:27:01 siege dovecot: IMAP(userA): file strfuncs.c: line 165 (p_strndup): assertion failed: (max_chars != (size_t)-1) Jan 7 18:27:01 siege dovecot: IMAP(userA): Raw backtrace: imap [0x46372e] -> imap [0x46349c] -> imap(t_strndup+0) [0x470cf0] -> imap(cmd_create+0xd1) [0x4142c1] -> imap [0x4178f7] -> imap [0x417989] -> imap(_client_input+0x6d) [0x417fbd] -> imap(io_loop_handler_run+0x101) [0x468e61] -> imap(io_loop_run+0x18) [0x467f28] -> imap(main+0x3f2) [0x41f6c2] -> /lib/libc.so.6(__libc_start_main+0xf4) [0x2b974f225b44] -> imap [0x4132e9] Jan 7 18:27:01 siege dovecot: child 27443 (imap) killed with signal 6 Jan 7 18:35:36 siege dovecot: IMAP(userB): file strfuncs.c: line 165 (p_strndup): assertion failed: (max_chars != (size_t)-1) Jan 7 18:35:36 siege dovecot: IMAP(userB): Raw backtrace: imap [0x46372e] -> imap [0x46349c] -> imap(t_strndup+0) [0x470cf0] -> imap(cmd_create+0xd1) [0x4142c1] -> imap [0x4178f7] -> imap [0x417989] -> imap(_client_input+0x6d) [0x417fbd] -> imap(io_loop_handler_run+0x101) [0x468e61] -> imap(io_loop_run+0x18) [0x467f28] -> imap(main+0x3f2) [0x41f6c2] -> /lib/libc.so.6(__libc_start_main+0xf4) [0x2ad667dfeb44] -> imap [0x4132e9] Jan 7 18:35:36 siege dovecot: child 27902 (imap) killed with signal 6 user authentifaction is done against local unix users. # 1.0.5: /etc/dovecot/dovecot.conf log_timestamp: %Y-%m-%d %H:%M:%S ssl_cert_file: /etc/ssl/certs/mail.pem ssl_key_file: /etc/ssl/private/mail.key login_dir: /var/run/dovecot/login login_executable: /usr/lib/dovecot/imap-login mail_extra_groups: mail mail_location: maildir:~/Maildir imap_client_workarounds: outlook-idle netscape-eoh tb-extra-mailbox-sep namespace: type: private prefix: INBOX. inbox: yes auth default: passdb: driver: pam userdb: driver: passwd socket: type: listen client: path: /var/spool/postfix/private/auth mode: 432 user: postfix group: postfix with kind regards, guenther sommer.

2 1

[Dovecot] What would you tell the CIO in an "ABCs of Email" overview?
by Esther Schindler 07 Jan '08

07 Jan '08

One of the key points that came up when I researched and wrote the "Five Things CIOs Should Know about Fighting Spam" article (http:// www.cio.com/article/28830) was that they should know the basics of how email works. Otherwise, said plenty of techies, the CIO won't have the first idea of what the email admin is complaining about. So I'm going to do my part. I'm going to write an "ABCs of Email" article (to accompany the many other ABCs articles we have on CIO.com, at http://www.cio.com/article/40242 ). I'd like your input on the topics that should be included, keeping in mind the fact that the target reader is a CIO, IT manager, or someone who wants to understand the basics, *not* actively get involved in email management. You don't need to write an essay for me or inundate me with links (though hey, if you want to make my life easier I shall not complain). What I'm looking for, primarily, are the categories of information that I should cover. In other words, if your CIO had an email ephiphany and asked you to give a half-hour presentation, what would you include? This won't be an "Expert says..." article nor will it be "Geek on the street says...." I intend to compile and research the "least you need to know" for the not-necessarily-techie bosses out there. And hopefully the end result will be that you have one less dumb question to deal with in your life. So: any suggestions? (You can reply privately if you prefer.) Esther Schindler senior online editor, CIO.com her blog: http://advice.cio.com/taxonomy/term/34

2 3

Re: [Dovecot] v1.1.beta13 released
by Bruce Bodger 06 Jan '08

06 Jan '08

On Jan 6, 2008, at 9:51 AM, Timo Sirainen wrote: >>>> What plugins do you use? >> >> mail_log and cmusieve (dovecot-sieve-1.1.3) > > Well, I can't reproduce this with my setup, so there must be something > special that's causing this. Unless it's your client that creates the > mailbox itself? Perhaps you're right. I just tried using Thunderbird (Mac) and it does not exhibit this behavior. Apple Mail has an option, "Automatically synchronize changed mailboxes" which I do NOT have checked so the problem must be within Apple Mail as you surmised. In fact, Apple Mail is now displaying public/INBOX in it's list of mailboxes even though it hasn't been created under ~/Maildir/control/ public G518X2:~/Maildir/control/public root# ls -la total 8 drwx------ 5 bb admin 170 Jan 6 10:20 . drwx------ 3 bb admin 102 Jul 28 22:38 .. drwx------ 4 bb admin 136 Jan 6 09:54 .HAM drwx------ 4 bb admin 136 Jan 6 10:10 .SPAM -rw------- 1 bb admin 9 Sep 9 07:06 subscriptions ...and INBOX in not listed in 'subscriptions'. Sorry for the goose chase, unless you like goose, of course :-) B. Bodger

1 0

[Dovecot] v1.1.beta13 released
by Timo Sirainen 06 Jan '08

06 Jan '08

http://dovecot.org/releases/1.1/beta/dovecot-1.1.beta13.tar.gz http://dovecot.org/releases/1.1/beta/dovecot-1.1.beta13.tar.gz.sig Changes since beta12: - Half of LDAP code was rewritten to fix reconnect/queuing problems. I did test that the new code works with and without auth binds, but be careful. - \Recent flags should finally work correctly with maildir. - last_used field wasn't updated for cache fields that were permanently cached. This caused them to be dropped after a month. TODO for RC1: - When pipelining commands, do only one sync after all of them. Besides improving performance, this fixes some rare problems when multiple commands are running simultaneously. - SEARCH/SORT: Replace invalid input with unicode "replacement character" instead of just skipping it. - Squat: Handle expunges. NFS support. - Fix Lucene support.

4 7

[Dovecot] imap cores
by Anil 06 Jan '08

06 Jan '08

Experts, (Now that I am able to run imap...) Here's what I am seeing with imap, it seems to die in the latest nightly. (tss, I am still trying to get dbx to work properly, maybe it won't, but I got some more details here.) ... 2 select "INBOX" * FLAGS (\Answered \Flagged \Deleted \Seen \Draft) * OK [PERMANENTFLAGS (\Answered \Flagged \Deleted \Seen \Draft \*)] Flags permitted. * 1 EXISTS * 0 RECENT * OK [UNSEEN 1] First unseen. * OK [UIDVALIDITY 1199514743] UIDs valid * OK [UIDNEXT 2] Predicted next UID 2 OK [READ-WRITE] Select completed. 3 UID fetch 1 ( BODY.PEEK[HEADER.FIELDS (From)]) Connection to mail closed by foreign host. openat(-3041965, "/var/mail/apps/domain/admin/Maildir/cur", O_RDONLY|O_NDELAY|O_LARGEFILE) = 9 fcntl(9, F_SETFD, 0x00000001) = 0 fstat64(9, 0x080474C0) = 0 stat64("/var/mail/apps/domain/admin/Maildir/cur", 0x080475C0) = 0 time() = 1199564680 getdents64(9, 0xFEFA4000, 8192) = 112 getdents64(9, 0xFEFA4000, 8192) = 0 close(9) = 0 fcntl(6, F_SETLK64, 0x08047680) = 0 lstat64("/var/mail/apps/domain/admin/Maildir/dovecot-uidlist.lock", 0x080476C0) = 0 unlink("/var/mail/apps/domain/admin/Maildir/dovecot-uidlist.lock") = 0 open64("/var/mail/apps/domain/admin/Maildir/cur/1199514786.M867961P7368.vds5,W=1325:2,", O_RDONLY) = 9 fstat64(9, 0x080477A0) = 0 pread64(9, " R e t u r n - P a t h :".., 4096, 0) = 1298 pread64(9, " R e t u r n - P a t h :".., 4096, 0) = 1298 close(9) = 0 write(2, "01 P f i l e i n d e x".., 82) = 82 getcontext(0x08047510) open("/proc/self/as", O_RDONLY) = 9 close(9) = 0 write(2, "01 E R a w b a c k t r".., 18) = 18 sigaction(SIGABRT, 0x00000000, 0x08047710) = 0 sigaction(SIGABRT, 0x08047650, 0x080476D0) = 0 schedctl() = 0xFED32000 lwp_sigmask(SIG_SETMASK, 0x00000000, 0x00000000) = 0xFFBFFEFF [0x0000FFFF] lwp_kill(1, SIGABRT) = 0 Received signal #6, SIGABRT [default] siginfo: SIGABRT pid=3257 uid=500 code=-1 This is all I can seem to get with dbx: program terminated by signal ABRT (Abort) 0xfee55687: __lwp_kill+0x0007: jae __lwp_kill+0x15 [ 0xfee55695, .+0xe ] (dbx) where =>[1] __lwp_kill(0x1, 0x6), at 0xfee55687 [2] _thr_kill(0x1, 0x6), at 0xfee52dee [3] raise(0x6), at 0xfee011bb [4] abort(0x817e3d8, 0x817e3d8, 0xfee7f5b8, 0x816e898, 0xffffffff, 0x81759e0), at 0xfede15d9 (dbx) # pstack core.imap.3479 core 'core.imap.3479' of 3479: imap fee55687 _lwp_kill (1, 6) + 7 fee011bb raise (6) + 1f fede15d9 abort (817e3d8, 817e3d8, fee7f5b8, 816e898, ffffffff, 81759e0) + cd 08118884 i_internal_fatal_handler () + 54 What do you think?

1 1

[Dovecot] deliver fails - RFE
by Anil 06 Jan '08

06 Jan '08

deliver has suid: -rwsr-xr-x 1 root root 1892044 Jan 5 19:21 deliver Jan 5 23:11:02 vds5 deliver(admin(a)domain.com): [ID 702911 mail.error] stat(/var/mail/apps/domain.com/admin/Maildir/tmp) failed: Permission denied The above mentioned directory has these permissions: drwx------ 3 vmail vmail 3 Jan 5 19:15 /var/mail/apps drwx------ 3 vmail vmail 3 Jan 5 19:15 /var/mail/apps/domain.com drwx------ 3 10001 10001 3 Jan 5 19:25 /var/mail/apps/domain.com/admin drwx------ 6 10001 10001 9 Jan 5 23:05 /var/mail/apps/domain.com/admin/Maildir/ drwx------ 2 10001 10001 2 Jan 5 19:03 /var/mail/apps/domain.com/admin/Maildir/tmp It seems deliver needs the /var/mail/apps and the /var/mail/apps/domain.com to be 755. Can Dovecot do this automatically when it creates these directories? (/var/mail/apps, /var/mail/apps/domain.com)

1 0

[Dovecot] Upgrading a live running dovecot - how?
by Daniel Watts 06 Jan '08

06 Jan '08

Hi Guys, This has bitten us twice now. We're running Gentoo and emerge (ie compile) a new version of Dovecot thinking we can finish that then restart Dovecot in our own time. It seems that Dovecot immediately starts to use the newly compiled Dovecot binary and we get version mismatch errors preventing access. Would be good if Dovecot behaved in such a way that it kept on using the old version (held in memory) until it was restarted where it then loaded the new version. Dan

3 2

[Dovecot] running imap command line
by Anil 06 Jan '08

06 Jan '08

I am trying to debug some core dump problems. I should be able to run imap by itself right? How to fix? # ./imap imap(root): Fatal: setgroups() failed: Too many extra groups I am using latest nightly code.

3 5

[Dovecot] How to use deliver to deliver to virtual users
by Andrew Falanga 05 Jan '08

05 Jan '08

Hi, Ok, here's my setup, each virtual user has a home directory as follows: /virtusers/<v_userid> and per the INBOX directive in the dovecot.conf file I also have a file as follows: /var/mail/<v_userid> Now, I've followed the directions as outlined here: http://wiki.dovecot.org/LDA/Sendmail But every time I send mail to one of my virtual users, I get this message The original message was received at Sat, 5 Jan 2008 14:22:51 -0700 (MST) from wa-out-1112.google.com [209.85.146.183] ----- The following addresses had permanent fatal errors ----- /var/mail/jdunkin (reason: Can't create output) (expanded from: <jdunkin(a)whitneybaptist.org>) ----- Transcript of session follows ----- 550 5.0.0 /var/mail/jdunkin... Can't create output What could I be missing? Andy

1 0

[Dovecot] help using sendmail LDA
by Anil 05 Jan '08

05 Jan '08

I am stuck. I get nothing in the logs (about deliver). Sendmail complains about "User unknown". I am not sure I have my sendmail.mc configured right, can someone confirm or give me some sample config files that make use of Dovecot+LDAP and sendmail LDA? Dovecot is running as root. I am a little confused, so the auth-master is not even needed? (the whole socket listen {}, since I am using static userdb and the user information was already found at authentication/login) Thank You! # 20080102: /usr/local/dovecot/etc/dovecot.conf listen: *:143 ssl_disable: yes disable_plaintext_auth: no login_dir: /usr/local/dovecot/var/run/dovecot/login login_executable: /usr/local/dovecot/libexec/dovecot/imap-login login_log_format_elements: user=<%n@%d> method=%m rip=%r lip=%l %c login_max_connections: 64 max_mail_processes: 128 mail_location: maildir:~/Maildir mail_debug: yes auth default: verbose: yes debug: yes passdb: driver: ldap args: /usr/local/dovecot/etc/dovecot-ldap.conf userdb: driver: static args: uid=vmail gid=vmail home=/var/mail/apps/%d/%n socket: type: listen master: path: /var/run/dovecot-auth-master mode: 384 user: vmail group: vmail My sendmail.mc file: define(`confFALLBACK_SMARTHOST', `mailhost$?m.$m$.')dnl define(`LOCAL_MAILER_PATH',`/usr/local/dovecot/libexec/dovecot/deliver') define(`LOCAL_MAILER_FLAGS',`DFMPhfnu9') define(`LOCAL_MAILER_ARGS',`deliver -d $u') MAILER(`local')dnl MAILER(`smtp')dnl LOCAL_NET_CONFIG R$* < @ $* .$m. > $* $#esmtp $@ $2.$m $: $1 < @ $2.$m. > $3

2 3

[Dovecot] FETCH for mailbox INBOX UID 39641 got too little data: 4823 vs 4825
by Mikhail Teterin 04 Jan '08

04 Jan '08

Whenever I try to access an e-mail in the middle (rather than at the end) of the mailbox, my mail-client (KMail) gets an error a message like this is logged in the maillog: IMAP(mi): FETCH for mailbox INBOX UID 39641 got too little data: 4823 vs 4825 IMAP(mi): Disconnected: Disconnected The actual numbers vary, but it is always X vs X+2 The problem started when I upgraded to 1.0.8. Unfortunately, it is still here with 1.0.9. The mailbox in question is the standard Unix mbox (/var/mail/mi in my case). The server runs FreeBSD/amd64. Please, advise. Thanks! -mi

5 11

[Dovecot] backup dovecot
by Nikolay Shopik 04 Jan '08

04 Jan '08

What is correct way to backup dovecot store? Is am I right what is just enough to copy all maildir and my configuration. So in case failure I can just prepare new machine copy config, maildirs and I'm good to go with this.

7 11

[Dovecot] Optimizing POP3 performance?
by Sebastian Färber 04 Jan '08

04 Jan '08

Hello, I recently migrated to Dovecot from Courier-IMAP and i'm very happy with the IMAP Performance and Dovecot in general. The server is running qmail-ldap and i'm still using the qmail pop3 daemon for the POP3 users. Because i want to get rid of qmail completely (switching to exim) i just tried to replace the qmail pop3 daemon with dovecot too. Immediately after the migration the server became basically unusable because of the high I/O Load caused by the dovecot pop3 daemon. I did some debugging and it looks like dovecot opens every old mail in a users maildir and wants to create it's index files etc. I tried running dovecot pop3 with and without "in memory" indexes but this didn't change anything. Is it possible to disable the indexing of the old e-mails completly for pop3? I understand that dovecot is primarily an IMAP Server but i didn't expect the POP3 Performance to be that bad compared to the qmail pop3 daemon (which is very very basic i have to admit). Is there anything i may have overlooked which helps with the POP3 Performance, any patches that disable the unnecessary indexing etc.? If not, what do you guys recommend and use as a pop3 daemon that is fast and stable? I'm using dovecot 1.0.2 (i checked the ChangeLog, doesn't look like upgrading would give better pop3 performance?) and the relevant pop3-config is: mail_location: maildir:~/Maildir:INDEX=MEMORY mail_debug: yes dotlock_use_excl: yes maildir_copy_with_hardlinks: yes mail_executable: /usr/local/dovecot/libexec/dovecot/pop3 mail_plugin_dir: /usr/local/dovecot/lib/dovecot/pop3 pop3_enable_last: yes pop3_uidl_format: %f pop3_client_workarounds: outlook-no-nuls oe-ns-eoh Any hint in the right direction is greatly appreciated Regards, Sebastian Faerber

2 2

[Dovecot] Homedir permissions problems with LDAP
by "Fábio M. Catunda" 04 Jan '08

04 Jan '08

Sorry, my previous message entered like a reply, so I'm sending again to keep the list in order. Hi, I'm using dovecot 1.0.5-1 (debian stable) and I'm trying to build a virtual host machine with ldap. In my dovecot-ldap.conf thats what I have: uris = ldap://<ldapserver>/ dn = cn=Manager, dc=domain, dc=com, dc=br dnpass = <ultra secret passwd> sasl_bind = no tls = no ldap_version = 3 base = ou=Users, dc=domain, dc=com, dc=br deref = never scope = subtree user_attrs = homeDirectory=homeDirectory user_filter = (&(mail=%u)) pass_attrs = mail=user,userPassword=password pass_filter = (&(mail=%u)) default_pass_scheme = CRYPT user_global_uid = 107 user_global_gid = 109 But I don't want to read homeDirectory from LDAP, so I have the following in dovecot.conf mail_location = maildir:/var/virtual/%d/%n/ The question is when I try to log into imap I receive the following error: dovecot: 2008-01-03 10:03:55 Error: IMAP(magalhaes(a)fmcs.com.br): mkdir(/HOME_DIRECTORY_USED_BUT_NOT_GIVEN_BY_USERDB/expunged/cur) failed: Permission denied dovecot: 2008-01-03 10:03:55 Error: IMAP(magalhaes(a)fmcs.com.br): mkdir(/HOME_DIRECTORY_USED_BUT_NOT_GIVEN_BY_USERDB/deleted/cur) failed: Permission denied dovecot: 2008-01-03 10:03:55 Error: IMAP(magalhaes(a)fmcs.com.br): mkdir(/HOME_DIRECTORY_USED_BUT_NOT_GIVEN_BY_USERDB/deleted/expunged/cur) failed: Permission denied (I'm using lazy_expunge too) I can log in and etc, but this is strange for me, why do I receive this Permission denied message? The directory /var/virtual/<domain>/<user>/ is owned by uid 107 and gid 109, so, i believe thats ok. My homedir in ldap is /home/samba/<user> , so I changed tried to chown 107:109 too but I still get this error. Is there a way for me to know what is the full path that dovecot is trying to use? HOME_DIRECTORY_USED_BUT_NOT_GIVEN_BY_USERDB is no helping me too much! Oh, I imagine that my lazy_expunge conf may be helpfull: namespace private { prefix = .EXPUNGED/ separator = / location = maildir:~/expunged hidden = yes } namespace private { prefix = .DELETED/ separator = / location = maildir:~/deleted hidden = yes } namespace private { prefix = .DELETED/.EXPUNGED/ separator = / location = maildir:~/deleted/expunged hidden = yes } Thanks for all!

1 1

[Dovecot] Compile error introduced in b13 (Solaris 10)
by mikkel＠euro123.dk 04 Jan '08

04 Jan '08

Any news on the b13 compile issue on Solaris 10 (both Sparc and X86)? Would be nice to know whether it's our own headache or something thats not supposed to be and thus expected to be fixed in the next release. Just to be clear this didn't occur in any other release (I've compiled all previous v1.1 betas on the same setup including b12). Ref.: http://dovecot.org/list/dovecot/2007-December/027702.html http://dovecot.org/list/dovecot/2007-December/027704.html Regards, Mikkel

1 1

[Dovecot] latest 1.1 betas and quota warning
by arvids 03 Jan '08

03 Jan '08

Hello, I noticed that quota warning is not executed with latest 1.1 betas and I looked at the code that implements quota warning. Here it is (line 657 in quota.c): if ((bytes_current < warnings[i].bytes_limit && bytes_current >= warnings[i].bytes_limit) || (count_current < warnings[i].count_limit && count_current >= warnings[i].count_limit)) { quota_warning_execute(warnings[i].command); break; } It seems to me that quota_warning_execute function will never be executed. Timo, can you look at this code? Regards, Arvids

1 0

Re: [Dovecot] [Fwd: Re: Building path to maildir]
by Michel Bulgado 03 Jan '08

03 Jan '08

Hi Charles I receive the Timo's reply. thanks for send me again Use the option that i said, but the problem persists. userdb static { args = uid=500 gid=500 } userdb prefetch { } Jan 2 23:50:08 michel dovecot: auth(default): new auth connection: pid=18374 Jan 2 23:50:20 michel dovecot: auth(default): client in: AUTH 1 PLAIN service=POP3 secured lip=127.0.0.1 rip=127.0.0.1 resp=<hidden> Jan 2 23:50:20 michel dovecot: auth(default): pam(michel,127.0.0.1): lookup service=dovecot Jan 2 23:50:20 michel dovecot: auth(default): client out: OK 1 user=michel Jan 2 23:50:20 michel dovecot: auth(default): master in: REQUEST 1 18306 1 Jan 2 23:50:20 michel dovecot: auth(default): master out: USER 1 michel uid=503 gid=503 Jan 2 23:50:20 michel dovecot: POP3(michel): Loading modules from directory: /usr/lib64/dovecot/pop3 Jan 2 23:50:20 michel dovecot: pop3-login: Login: user=<michel>, method=PLAIN, rip=127.0.0.1, lip=127.0.0.1, secured Jan 2 23:50:20 michel dovecot: POP3(michel): Module loaded: /usr/lib64/dovecot/pop3/lib10_quota_plugin.so Jan 2 23:50:20 michel dovecot: POP3(michel): Effective uid=503, gid=503 Jan 2 23:50:20 michel dovecot: POP3(michel): maildir: data=/var/spool/virtualmail//michel Jan 2 23:50:20 michel dovecot: POP3(michel): maildir: root=/var/spool/virtualmail//michel, index=/var/spool/virtualmail//michel, control=, inbox= Dovecot detect the username , but no detect the part domain that i need to build the path to maildir. Use ldap (active directory) to retrieve the mail attribute which specifies the address of my mail users. I ask, as I could do with pam. As I get the attribute mail with pam mail_location = maildir:/var/storage/virtualmail/%d/%n So must be /var/spool/virtualmail/casa.co.cu/michel not /var/spool/virtualmail//michel ---------------------------------------------------------------- This message was sent using IMP, the Internet Messaging Program.

3 2

[Dovecot] Building path to maildir
by Michel Bulgado 03 Jan '08

03 Jan '08

I have the following situation and I need help from all you people I have dovecot 0.99.11 and i want to migrate to a superior version like dovecot 1.0 looking forward to implement quotas in my system , and use the function deliver with postfix. My Scenario is as follow Dovecot + LDAP (ADS) + postfix My actual version is : 0.99.11 This is my actual configuration: Protocols = imap pop3 imap_listen = * pop3_listen = * login_dir = /var/run/dovecot-login login = imap login = pop3 default_mail_env = maildir:/var/spool/virtualmail/%d/%n mbox_locks = fcntl auth = dovecot-auth auth_mechanisms = plain auth_default_realm = CASA.CULT.CU auth_userdb = ldap /etc/dovecot-ldap.conf auth_passdb = pam dovecot auth_user = root auth_verbose = yes auth_debug = yes dovecot-ldap.conf hosts = ldap.casa.cult.cu base = ou=CASA,dc=casa,dc=cult,dc=cu dn = cn=unix-conector,cn=Users,dc=casa,dc=cult,dc=cu dnpass = ***** ldap_version = 3 deref = never scope = subtree user_global_uid = 500 user_global_gid = 500 user_attrs = mail,/var/spool/virtualmail/%d/%n,,,, user_filter = (&(objectClass=user)(!(objectClass=computer))(sAMAccountName=%n)) I see many changes in this new version. One of them is : -Renamed default_mail_env to mail_location - many changes in ldap queries With the new version my problem is when to dovecot tries to detect or builds the way where it´s stored the mailbox of my users. In /var/spool/virtualmail/%d/%u , it does not detect the domain when asking to my active directory (w2k) and consequently takes a value of my default realm = casa.cult.cu in this case the default domain where authenticate my users. My configuration in the new version of dovecot: protocols = imap pop3 protocol imap { listen = * } protocol pop3 { listen = * } login_dir = /var/run/dovecot/login login_chroot = yes login_greeting = Dovecot ready. mail_location = maildir:/var/spool/virtualmail/%d/%u mail_debug = yes mbox_read_locks = fcntl mbox_write_locks = fcntl protocol imap { mail_plugins = quota imap_quota } protocol pop3 { mail_plugins = quota } protocol lda { postmaster_address = postmaster(a)example.com mail_plugins = quota auth_socket_path = /var/run/dovecot/auth-master } auth_executable = /usr/libexec/dovecot/dovecot-auth auth_verbose = yes auth_debug = yes auth default { mechanisms = plain passdb pam { args = dovecot } userdb ldap { args = /etc/dovecot-ldap.conf } userdb prefetch { } user = root socket listen { master { path = /var/run/dovecot/auth-master mode = 0600 user = virtualmail group = virtualmail } } } dict { } plugin { quota = maildir:storage=10240 } user_attrs = mail,/var/spool/virtualmail/%d/%n,,,, The attribute mail in the old version returns to me user(a)casa.com or user(a)casa.cult.cu this way dovecot can build the way with no problems at all. But in this late version something is happening, it only takes the value %n= user , but not %d = domain . It´s not working. do you have any idea how I can solve this I beg your pardon for my poor English. ---------------------------------------------------------------- This message was sent using IMP, the Internet Messaging Program.

2 1

[Dovecot] Trying to build the maildir path
by Michel Bulgado 03 Jan '08

03 Jan '08

I use ldap because is where are store the users and his make place the authentication . In my LDAP I have a attribute mail. like this = mail: pepe(a)casa.com I Have more that one domain This atribute return to me something like : pepe(a)casa.com where i use tu build the path to maildir, using %d and %n variables . /var/spool/vmail/%d/%n = /var/spool/vmail/casa.com/pepe this work in 0.99.11 but no in the latest version of dovecot. ---------------------------------------------------------------- This message was sent using IMP, the Internet Messaging Program.

2 1

[Dovecot] Permanent roadmap page on web
by Timo Sirainen 02 Jan '08

02 Jan '08

http://dovecot.org/roadmap.html I'll try to keep it updated.

7 11

[Dovecot] Dovecot on OpenWRT
by Dirk Aust 02 Jan '08

02 Jan '08

Hello, does anybody has a patch so that I can compile for the OpenWRT, currently the configure script can't be used for cross-compiling. Best Regards, Dirk Aust

1 0

[Dovecot] dovecot-auth consumes 100% CPU time on Solaris 10
by KOT MATPOCKuH 02 Jan '08

02 Jan '08

Is problem with CPU load solved? I have same problem - dovecot-auth eats one of my cores. I'm using dovecot 1.0.7 on Solaris 10 Sparc. I tried to use auth-bind and standard scheme with separate user for bind and have same result. Problem occupts only with LDAP authentication, on some other systems I use PostgreQSL and MySQL authentication and doesn't have this problem. Using PAM authentication is not possible, because dovecot run in chroot'ed environment and I planing to move it to separate system or zone without ldap client. -- MATPOCKuH

7 20

[Dovecot] Delay on failed pw attempts
by Dean Brooks 02 Jan '08

02 Jan '08

Hi, Is there a way, or can a way be added, to add an "auth_failed_delay=10s" style option that would put in an artificial delay after a failed password attempt? As it stands now, Dovecot seems highly vulnerable to widescale brute-force password dictionary scans. Even if it's not configurable, can a delay be hardcoded to something like, say, 10 or 15 seconds? -- Dean Brooks dean(a)iglou.com

10 18

[Dovecot] deliver triggering SELinux AVC denials
by Gerry Reno 02 Jan '08

02 Jan '08

I setup postfix/dovecot on a new machine and now all works well with the small exception of dovecot triggering selinux avc denials on some temp... files here is a sample alert: Summary SELinux is preventing /usr/libexec/dovecot/deliver (dovecot_deliver_t) "link" to temp.localhost.678.40caaf5592891c46 (user_home_dir_t). Detailed Description SELinux denied access requested by /usr/libexec/dovecot/deliver. It is not expected that this access is required by /usr/libexec/dovecot/deliver and this access may signal an intrusion attempt. It is also possible that the specific version or configuration of the application is causing it to require additional access. Allowing Access Sometimes labeling problems can cause SELinux denials. You could try to restore the default system file context for temp.localhost.678.40caaf5592891c46, restorecon -v temp.localhost.678.40caaf5592891c46 If this does not work, there is currently no automatic way to allow this access. Instead, you can generate a local policy module to allow this access - see http://fedora.redhat.com/docs/selinux-faq-fc5/#id2961385 Or you can disable SELinux protection altogether. Disabling SELinux protection is not recommended. Please file a http://bugzilla.redhat.com/bugzilla/enter_bug.cgi against this package. Additional Information Source Context user_u:system_r:dovecot_deliver_t Target Context user_u:object_r:user_home_dir_t Target Objects temp.localhost.678.40caaf5592891c46 [ file ] Affected RPM Packages dovecot-1.0.7-16.fc7 [application] Policy RPM selinux-policy-2.6.4-63.fc7 Selinux Enabled True Policy Type targeted MLS Enabled True Enforcing Mode Permissive Plugin Name plugins.catchall_file Host Name localhost Platform Linux localhost 2.6.23.8-34.fc7 #1 SMP Thu Nov 22 23:05:33 EST 2007 i686 athlon Alert Count 1 First Seen Tue 01 Jan 2008 09:29:35 PM EST Last Seen Tue 01 Jan 2008 09:29:35 PM EST Local ID 507dd6a2-da46-4541-8c10-a0771bc85042 Line Numbers Raw Audit Messages avc: denied { link } for comm="deliver" dev=dm-0 egid=5000 euid=5000 exe="/usr/libexec/dovecot/deliver" exit=0 fsgid=5000 fsuid=5000 gid=5000 items=0 name="temp.localhost.678.40caaf5592891c46" pid=678 scontext=user_u:system_r:dovecot_deliver_t:s0 sgid=5000 subj=user_u:system_r:dovecot_deliver_t:s0 suid=5000 tclass=file tcontext=user_u:object_r:user_home_dir_t:s0 tty=(none) uid=5000 and 5000 is user vmail. When I look for these files that it is complaining about they are never in the filesystem. I get about 8 alerts with every email that is delivered. Right now I have SELinux set to permissive so that the mail gets delivered but I would like to find the cause of this problem so that I can set it back to enforcing. ???? Gerry

2 1

[Dovecot] 1.1b13 build in FreeBSD fails using 'make'; 'gmake' apparently required
by snowcrash 01 Jan '08

01 Jan '08

hi, i'm doing a 1st build of dovecot in a freebsd 62R jail. following instructions at http://wiki.dovecot.org/CompilingSource ./configure make sudo make install after an OK 'configure', @ 'make', i get make make all-recursive Making all in src Making all in lib make: don't know how to make unicodemap.c. Stop *** Error code 1 Stop in /s/usr-local/build/dovecot/dovecot/src. *** Error code 1 Stop in /s/usr-local/build/dovecot/dovecot. *** Error code 1 Stop in /s/usr-local/build/dovecot/dovecot. looking at source, i couldn't figure this out ... on a whim, i tried 'gmake', instead of 'make'. it completes without error. subsequent make check make install are both ok, resulting in ls -al dovecot -rwxr-xr-x 1 root wheel 459786 Dec 30 21:53 dovecot* ./dovecot --version 1.1.beta13 on FreeBSD, apparently, make != gmake ls -al `which make` `which gmake` -r-xr-xr-x 1 root wheel 350904 Dec 29 17:25 /usr/bin/make* -r-xr-xr-x 1 root wheel 199808 Dec 27 06:14 /usr/local/bin/gmake* make --version make: illegal option -- - usage: make [-BPSXeiknqrstv] [-C directory] [-D variable] [-d flags] [-E variable] [-f makefile] [-I directory] [-j max_jobs] [-m directory] [-V variable] [variable=value] [target ...] gmake --version GNU Make 3.81 Copyright (C) 2006 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. This program built for amd64-portbld-freebsd6.2 so, using 'gmake' seems to solve the issue. neither at the link above, nor at, http://wiki.dovecot.org/DovecotServerInstallations/FreeBSD/6.0RELEASE/20Use… is the use of 'gmake'mentioned. i'd ask/suggest that either said mention be added to the wiki (if it's not already there, and i missed it), or, that the build be made to be FreeBSD-make friendly. hth. cheers!

8 17

[Dovecot] my.cnf reading support in MySQL backend
by Luca Longinotti 01 Jan '08

01 Jan '08

I hope this ml is the right place to send this... Anyway, I'd very much like for the MySQL backend to call mysql_options, so that it'll read the settings defined in MySQL's my.cnf under the [client] section. This allows to set a whole slew of MySQL specific settings for the MySQL connection, for example to enable the compressed protocol, set charsets, enable SSL client verification, and much more. A patch is attached that implements this. See http://dev.mysql.com/doc/refman/5.0/en/mysql-options.html for more info. -- Best regards, Luca Longinotti aka CHTEKK LongiTEKK Networks Admin: chtekk(a)longitekk.com Gentoo Dev: chtekk(a)gentoo.org SysCP Dev: chtekk(a)syscp.org TILUG Supporter: chtekk(a)tilug.ch

2 5

[Dovecot] deliver: keep existing From_ line
by Alexander 'Leo' Bergolth 01 Jan '08

01 Jan '08

Hi! I'm using procmail to filter my email. (I have to use it because of various features that are not supported by sieve.) However, I'd like to deliver mail to my mboxes using dovecots deliver program in order to update index files and speed up mbox access. Using "| $DELIVER -m <mboxname>" in my procmail receipes, everything works fine, except that the envelope sender address is mangled. deliver sets it to MAILER-DAEMON, even though it is already provided in the first line of the mail. I cannot use the "-f <address>" options of deliver, since procmail doesn't provide the envelope-sender address in a variable. (I'd have to extract it from the first line of the mail using a separate receipe, which isn't very efficient.) Is there a way to keep the already existing "From " line? Thanks in advance, --leo -- e-mail ::: Alexander.Bergolth (at) wu-wien.ac.at fax ::: +43-1-31336-906050 location ::: Computer Center | Vienna University of Economics | Austria

2 1

[Dovecot] Segmentation fault in dovecot-sieve-1.1.2 + dovecot-1.1.beta13
by Ron Avriel 01 Jan '08

01 Jan '08

Hi, dovecot-sieve-1.1.2 + dovecot-1.1.beta13 segfaults with the following sieve filter: --- require ["imapflags"]; if header :contains "subject" ["test"] { addflag "$testflag"; } --- when a message with a subject containing "test" is delivered via dovecot lda. The fault backtrace is: (gdb) run Starting program: /usr/local/libexec/dovecot/deliver -d load1(a)virt1.cti2.com < bad.txt Program received signal SIGSEGV, Segmentation fault. get_flags (sieve_flags=0xbfe7e438, flags_r=0xbfe7dee4, keywords_r=0x2) at /root/dovecot-1.1.beta13/src/lib/array.h:145 145 *count_r = array->buffer->used / array->element_size; (gdb) bt #0 get_flags (sieve_flags=0xbfe7e438, flags_r=0xbfe7dee4, keywords_r=0x2) at /root/dovecot-1.1.beta13/src/lib/array.h:145 #1 0x00f68744 in sieve_keep (ac=0x2, ic=0x0, sc=0xbfe7f4e0, mc=0xbfe7f480, errmsg=0xbfe7e3f0) at sieve-cmu.c:561 #2 0x00f779a5 in do_sieve_error (ret=0, interp=0x92dbf18, script_context=0xbfe7f4e0, message_context=0xbfe7f480, imapflags=0xbfe7e438, actions=0x92e42d8, notify_list=0x0, lastaction=8, implicit_keep=1, actions_string=0xbfe7e440 "Action(s) taken:\n", errmsg=0x0) at script.c:627 #3 0x00f780d8 in sieve_execute_bytecode (exe=0x92dcc58, interp=0x92dbf18, script_context=0xbfe7f4e0, message_context=0xbfe7f480) at script.c:824 #4 0x00f69809 in cmu_sieve_run (namespaces=0x92d5c70, storage_r=0xbfe7f6ac, mail=0x92de358, script_path=0x92d3c82 "/usr/local/etc/sieve_global.txt", destaddr=0xbff3fbb9 "load1(a)virt1.cti2.com", username=0x92d4b05 "load1(a)virt1.cti2.com", mailbox=0x80d0367 "INBOX") at sieve-cmu.c:971 #5 0x00f67752 in cmusieve_deliver_mail (namespaces=0x92d5c70, storage_r=0xbfe7f6ac, mail=0x92de358, destaddr=0xbff3fbb9 "load1(a)virt1.cti2.com", mailbox=0x80d0367 "INBOX") at cmusieve-plugin.c:76 #6 0x0805aa4f in main (argc=3, argv=0xbfe7f794) at deliver.c:940 (gdb) I managed to fix the problem with this patch to sieve-cmu.c: --- sieve-cmu.c.orig 2007-12-31 10:21:54.000000000 +0200 +++ sieve-cmu.c 2007-12-31 10:24:18.000000000 +0200 @@ -495,6 +495,7 @@ ARRAY_DEFINE(keywords, const char *); const char *name; int i; + unsigned int count; *flags_r = 0; @@ -524,7 +525,7 @@ array_append(&keywords, &name, 1); *keywords_r = array_count(&keywords) == 1 ? NULL : - array_get(&keywords, 0); + array_get(&keywords, &count); } static int sieve_fileinto(void *ac, BTW, dovecot-sieve-1.0.2 + dovecot-1.0.9 work OK for the above. Happy New Year and thanks for a great product, Ron ____________________________________________________________________________________ Never miss a thing. Make Yahoo your home page. http://www.yahoo.com/r/hs

2 1

[Dovecot] Building path to maildir
by Michel Bulgado 01 Jan '08

01 Jan '08

Hello everyone Happy new year . This is the first time I address to the list I have the following situation and I need help from all you people I have dovecot 0.9-11 and i want to migrate to a superior version like dovecot 1.0 looking forward to implement quotas in my system , and use the function deliver with postfix. My Scenario is as follow Dovecot + LDAP (ADS) + postfix My actual version is : 0.99.11 This is my actual configuration: Protocols = imap pop3 imap_listen = * pop3_listen = * login_dir = /var/run/dovecot-login login = imap login = pop3 default_mail_env = maildir:/var/spool/virtualmail/%d/%n mbox_locks = fcntl auth = dovecot-auth auth_mechanisms = plain auth_default_realm = CASA.CULT.CU auth_userdb = ldap /etc/dovecot-ldap.conf auth_passdb = pam dovecot auth_user = root auth_verbose = yes auth_debug = yes dovecot-ldap.conf hosts = ldap.casa.cult.cu base = ou=CASA,dc=casa,dc=cult,dc=cu dn = cn=unix-conector,cn=Users,dc=casa,dc=cult,dc=cu dnpass = ***** ldap_version = 3 deref = never scope = subtree user_global_uid = 500 user_global_gid = 500 user_attrs = mail,/var/spool/virtualmail/%d/%n,,,, user_filter = (&(objectClass=user)(!(objectClass=computer))(sAMAccountName=%n)) I see many changes in this new version. One of them is : -Renamed default_mail_env to mail_location - many changes in ldap queries With the new version my problem is when to dovecot tries to detect or builds the way where it´s stored the mailbox of my users. In /var/spool/virtualmail/%d/%u , it does not detect the domain when asking to my active directory (w2k) and consequently takes a value of my default realm = casa.cult.cu in this case the default domain where authenticate my users. My configuration in the new version of dovecot: protocols = imap pop3 protocol imap { listen = * } protocol pop3 { listen = * } login_dir = /var/run/dovecot/login login_chroot = yes login_greeting = Dovecot ready. mail_location = maildir:/var/spool/virtualmail/%d/%u mail_debug = yes mbox_read_locks = fcntl mbox_write_locks = fcntl protocol imap { mail_plugins = quota imap_quota } protocol pop3 { mail_plugins = quota } protocol lda { postmaster_address = postmaster(a)example.com mail_plugins = quota auth_socket_path = /var/run/dovecot/auth-master } auth_executable = /usr/libexec/dovecot/dovecot-auth auth_verbose = yes auth_debug = yes auth default { mechanisms = plain passdb pam { args = dovecot } userdb ldap { args = /etc/dovecot-ldap.conf } userdb prefetch { } user = root socket listen { master { path = /var/run/dovecot/auth-master mode = 0600 user = virtualmail group = virtualmail } } } dict { } plugin { quota = maildir:storage=10240 } user_attrs = mail,/var/spool/virtualmail/%d/%n,,,, The attribute mail in the old version returns to me user(a)casa.com or user(a)casa.cult.cu this way dovecot can build the way with no problems at all. But in this late version something is happening, it only takes the value %n= user , but not %d = domain . It´s not working. do you have any idea how I can solve this I beg your pardon for my poor English. ---------------------------------------------------------------- This message was sent using IMP, the Internet Messaging Program.

2 1

[Dovecot] Maildir
by Peter Fraser 01 Jan '08

01 Jan '08

I have been trying to set up dovecot with postfix to use at work. I'm trying to configure dovecot to authenticate against active directory and postfix the same. I installed dovecot 1.0.10 on FreeBSD 7.0 beta 2 When I telnet in the get authentication ok but an error suggesting that there is no Mailbox belonging to that user. I am using Maildirs. How can I now create a Maildir with the proper permissions for that virtual user? Thanks for any assistance.

1 0

[Dovecot] Enhanced Kerberos support
by Richard A Nelson 31 Dec '07

31 Dec '07

The recent addition of auth_gssapi_hostname is a welcome addition, but a little more is needed for multi-homed (or multi-domained) sites. SSH recently added this enhancement to address this common need: GSSAPIStrictAcceptorCheck Determines whether to be strict about the identity of the GSSAPI acceptor a client authenticates against. If “yes” then the client must authenticate against the host service on the current hostname. If “no” then the client may authenticate against any service key stored in the machine’s default store. This facility is provided to assist with operation on multi homed machines. The default is “yes”. Note that this option applies only to protocol version 2 GSSAPI connections, and setting it to “no” may only work with recent Kerberos GSSAPI libraries. I've heard that other daemons support multi-names by instead of using gethostname(), obtain the hostname of the interface that the request came in on. Can either approach be looked at for dovecot ? Thanks, -- Richard A Nelson (Rick) cowboy(a)((linux.)?vnet|us).ibm.com Phone: 1-408-463-5584 Fax: 1-408-463-3873 COBOL Development IBM Silicon Valley Laboratory http://www.ibm.com/software/awdtools/cobol/

5 5

[Dovecot] Indexes
by Daniel L. Miller 31 Dec '07

31 Dec '07

To be more specific: Alert The current command did not succeed. The mail server responded: Internal error occurred. Refer to server log for more information. [timestamp] -- Daniel

1 0

[Dovecot] Help with logging in and getting mail
by Andrew Falanga 31 Dec '07

31 Dec '07

Hi, Very new to dovecot and to using POP3/IMAP (from this perspective anyway). First things first, per the instructions from the web site: dovecot version: 1.0.5 dovecot config: # 1.0.5: /usr/local/etc/dovecot.conf protocols: imap pop3 ssl_disable: yes disable_plaintext_auth: no login_dir: /var/run/dovecot/login login_executable(default): /usr/local/libexec/dovecot/imap-login login_executable(imap): /usr/local/libexec/dovecot/imap-login login_executable(pop3): /usr/local/libexec/dovecot/pop3-login verbose_proctitle: yes first_valid_gid: 0 mail_extra_groups: mail mail_location: mbox:~/mail/:INBOX=/var/mail/%u mail_executable(default): /usr/local/libexec/dovecot/imap mail_executable(imap): /usr/local/libexec/dovecot/imap mail_executable(pop3): /usr/local/libexec/dovecot/pop3 mail_plugin_dir(default): /usr/local/lib/dovecot/imap mail_plugin_dir(imap): /usr/local/lib/dovecot/imap mail_plugin_dir(pop3): /usr/local/lib/dovecot/pop3 imap_client_workarounds(default): delay-newmail outlook-idle netscape-eoh tb-extra-mailbox-sep imap_client_workarounds(imap): delay-newmail outlook-idle netscape-eoh tb-extra-mailbox-sep imap_client_workarounds(pop3): outlook-idle pop3_uidl_format(default): pop3_uidl_format(imap): pop3_uidl_format(pop3): %08Xu%08Xv pop3_client_workarounds(default): pop3_client_workarounds(imap): pop3_client_workarounds(pop3): outlook-no-nuls oe-ns-eoh auth default: mechanisms: plain digest-md5 user: vmail passdb: driver: sql args: /usr/local/etc/dovecot-sql.conf userdb: driver: sql args: /usr/local/etc/dovecot-sql.conf Please help me diagnose what is causing the following problem. Essentially, this user is a virtual user. I have it so that the system user, vmail, is the basket into which all virtual users e-mail goes. If my understanding is correct (and please enlighten me if it's not), mail aliases are setup to "map" aliased names into a real account. From there, dovecot will return e-mail to the virtual user based upon the "To" field of the e-mail, correct? I have some aliases in my sendmail config that do just this. From the error below, it would seem that dovecot is actually authenticating the virutual user "jdunkin" in this case, but can't get some directories made. I've seen on my FreeBSD system that each system user has a "mail" file in the directory, /var/mail/<userid>. What needs to be done further? Also, how do I ensure that virtual users are able to get their mail as well as system users? Dec 29 15:01:54 whitbap dovecot: pop3-login: Login: user=<jdunkin>, method=PLAIN, rip=71.221.168.29, lip=192.168.2.23 Dec 29 15:01:54 whitbap dovecot: POP3(jdunkin): mkdir_parents(/var/mail/vmail//mail) failed: Not a directory Dec 29 15:01:54 whitbap dovecot: POP3(jdunkin): Failed to create storage with data: mbox:/var/mail/vmail//mail/:INBOX=/var/mail/jdunkin Dec 29 15:01:54 whitbap dovecot: child 61793 (pop3) returned error 89 Thanks, Andy

3 4

[Dovecot] 1.1b13 build
by Jerry Yeager 31 Dec '07

31 Dec '07

After reading of the problems encountered on other systems, the 1.1 beta 13 version (main part as well as Deliver) seems to inexplicably be running just fine under OS X 10.5.1 for some reason. :^) Jerry

1 0

[Dovecot] Time just moved backwards
by Neal Becker 31 Dec '07

31 Dec '07

This wins the 2007 award for strangest (or most amusing) log message: dovecot: Time just moved backwards by 13 seconds. This might cause a lot of problems, so I'll just kill myself now. It does, unfortunately, leave dovecot dead, which was pretty mysterious to me. Maybe it could re-exec instead?

3 2

[Dovecot] b13 Compile error on Solaris 10 (Sparc)
by mikkel＠euro123.dk 31 Dec '07

31 Dec '07

All betas so far have compiled without problems on my setup, but something breaks in b13. This problem occurs with both make and gmake. Below are outputs from make and gmake. Regards, Mikkel make all-recursive Making all in src Making all in lib make all-am if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -I/opt/pkgsrc/pkg/include/mysql -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -MT queue.o -MD -MP -MF ".deps/queue.Tpo" -c -o queue.o queue.c; \ then mv -f ".deps/queue.Tpo" ".deps/queue.Po"; else rm -f ".deps/queue.Tpo"; exit 1; fi In file included from queue.c:5: queue.h:13: error: redefinition of `struct queue' queue.h: In function `queue_idx': queue.h:37: error: structure has no member named `tail' queue.h:37: error: structure has no member named `area_size' queue.c: In function `queue_init': queue.c:12: error: structure has no member named `arr' queue.c:13: error: structure has no member named `area_size' queue.c:14: error: structure has no member named `arr' queue.c:14: error: structure has no member named `arr' queue.c:15: error: structure has no member named `area_size' queue.c: In function `queue_grow': queue.c:31: error: structure has no member named `full' queue.c:31: error: structure has no member named `head' queue.c:31: error: structure has no member named `tail' queue.c:33: error: structure has no member named `area_size' queue.c:34: error: structure has no member named `arr' queue.c:35: error: structure has no member named `area_size' queue.c:36: error: structure has no member named `arr' queue.c:36: error: structure has no member named `arr' queue.c:37: error: structure has no member named `area_size' queue.c:39: error: structure has no member named `area_size' queue.c:39: error: structure has no member named `head' queue.c:39: error: structure has no member named `area_size' queue.c:39: error: structure has no member named `head' queue.c:40: error: structure has no member named `arr' queue.c:40: error: structure has no member named `arr' queue.c:41: error: structure has no member named `area_size' queue.c:42: error: structure has no member named `head' queue.c:44: error: structure has no member named `arr' queue.c:44: error: structure has no member named `arr' queue.c:45: error: structure has no member named `head' queue.c:46: error: structure has no member named `head' queue.c:49: error: structure has no member named `head' queue.c:49: error: structure has no member named `tail' queue.c:50: error: structure has no member named `full' queue.c: In function `queue_append': queue.c:55: error: structure has no member named `full' queue.c:57: error: structure has no member named `full' queue.c:60: error: structure has no member named `arr' queue.c:60: error: structure has no member named `head' queue.c:61: error: structure has no member named `head' queue.c:61: error: structure has no member named `head' queue.c:61: error: structure has no member named `area_size' queue.c:62: error: structure has no member named `full' queue.c:62: error: structure has no member named `head' queue.c:62: error: structure has no member named `tail' queue.c: In function `queue_delete': queue.c:71: error: structure has no member named `full' queue.c:74: error: structure has no member named `tail' queue.c:74: error: structure has no member named `tail' queue.c:74: error: structure has no member named `area_size' queue.c:79: error: structure has no member named `head' queue.c:79: error: structure has no member named `head' queue.c:79: error: structure has no member named `area_size' queue.c:80: error: structure has no member named `area_size' queue.c:85: error: structure has no member named `head' queue.c:85: error: structure has no member named `tail' queue.c:88: error: structure has no member named `arr' queue.c:88: error: structure has no member named `tail' queue.c:89: error: structure has no member named `arr' queue.c:89: error: structure has no member named `tail' queue.c:90: error: structure has no member named `tail' queue.c:91: error: structure has no member named `tail' queue.c:92: error: structure has no member named `tail' queue.c:92: error: structure has no member named `area_size' queue.c:96: error: structure has no member named `head' queue.c:97: error: structure has no member named `arr' queue.c:98: error: structure has no member named `arr' queue.c:99: error: structure has no member named `head' queue.c:100: error: structure has no member named `head' queue.c:100: error: structure has no member named `head' queue.c:100: error: structure has no member named `area_size' queue.c:101: error: structure has no member named `area_size' queue.c:103: error: structure has no member named `head' queue.c:103: error: structure has no member named `area_size' queue.c:103: error: structure has no member named `head' queue.c:103: error: structure has no member named `tail' queue.c: In function `queue_clear': queue.c:113: error: structure has no member named `head' queue.c:113: error: structure has no member named `tail' queue.c:114: error: structure has no member named `full' queue.c: In function `queue_count': queue.c:119: error: structure has no member named `area_size' queue.c:121: error: structure has no member named `full' queue.c:122: error: structure has no member named `tail' queue.c:122: error: structure has no member named `head' *** Error code 1 make: Fatal error: Command failed for target `queue.o' Current working directory /tmp/dovecot-1.1.beta13/src/lib *** Error code 1 make: Fatal error: Command failed for target `all' Current working directory /tmp/dovecot-1.1.beta13/src/lib *** Error code 1 The following command caused the error: failcom='exit 1'; \ for f in x $MAKEFLAGS; do \ case $f in \ *=* | --[!k]*);; \ *k*) failcom='fail=yes';; \ esac; \ done; \ dot_seen=no; \ target=`echo all-recursive | sed s/-recursive//`; \ list='lib lib-dict lib-sql lib-ntlm lib-otp lib-settings lib-charset lib-mail lib-imap lib-index lib-storage lib-auth auth dict master login-common imap-login imap pop3-login pop3 deliver tests util plugins'; for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail" make: Fatal error: Command failed for target `all-recursive' Current working directory /tmp/dovecot-1.1.beta13/src *** Error code 1 The following command caused the error: failcom='exit 1'; \ for f in x $MAKEFLAGS; do \ case $f in \ *=* | --[!k]*);; \ *k*) failcom='fail=yes';; \ esac; \ done; \ dot_seen=no; \ target=`echo all-recursive | sed s/-recursive//`; \ list='src doc'; for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail" make: Fatal error: Command failed for target `all-recursive' Current working directory /tmp/dovecot-1.1.beta13 *** Error code 1 make: Fatal error: Command failed for target `all' gmake all-recursive gmake[1]: Entering directory `/tmp/dovecot-1.1.beta13' Making all in src gmake[2]: Entering directory `/tmp/dovecot-1.1.beta13/src' Making all in lib gmake[3]: Entering directory `/tmp/dovecot-1.1.beta13/src/lib' gmake all-am gmake[4]: Entering directory `/tmp/dovecot-1.1.beta13/src/lib' if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -I/opt/pkgsrc/pkg/include/mysql -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -MT queue.o -MD -MP -MF ".deps/queue.Tpo" -c -o queue.o queue.c; \ then mv -f ".deps/queue.Tpo" ".deps/queue.Po"; else rm -f ".deps/queue.Tpo"; exit 1; fi In file included from queue.c:5: queue.h:13: error: redefinition of `struct queue' queue.h: In function `queue_idx': queue.h:37: error: structure has no member named `tail' queue.h:37: error: structure has no member named `area_size' queue.c: In function `queue_init': queue.c:12: error: structure has no member named `arr' queue.c:13: error: structure has no member named `area_size' queue.c:14: error: structure has no member named `arr' queue.c:14: error: structure has no member named `arr' queue.c:15: error: structure has no member named `area_size' queue.c: In function `queue_grow': queue.c:31: error: structure has no member named `full' queue.c:31: error: structure has no member named `head' queue.c:31: error: structure has no member named `tail' queue.c:33: error: structure has no member named `area_size' queue.c:34: error: structure has no member named `arr' queue.c:35: error: structure has no member named `area_size' queue.c:36: error: structure has no member named `arr' queue.c:36: error: structure has no member named `arr' queue.c:37: error: structure has no member named `area_size' queue.c:39: error: structure has no member named `area_size' queue.c:39: error: structure has no member named `head' queue.c:39: error: structure has no member named `area_size' queue.c:39: error: structure has no member named `head' queue.c:40: error: structure has no member named `arr' queue.c:40: error: structure has no member named `arr' queue.c:41: error: structure has no member named `area_size' queue.c:42: error: structure has no member named `head' queue.c:44: error: structure has no member named `arr' queue.c:44: error: structure has no member named `arr' queue.c:45: error: structure has no member named `head' queue.c:46: error: structure has no member named `head' queue.c:49: error: structure has no member named `head' queue.c:49: error: structure has no member named `tail' queue.c:50: error: structure has no member named `full' queue.c: In function `queue_append': queue.c:55: error: structure has no member named `full' queue.c:57: error: structure has no member named `full' queue.c:60: error: structure has no member named `arr' queue.c:60: error: structure has no member named `head' queue.c:61: error: structure has no member named `head' queue.c:61: error: structure has no member named `head' queue.c:61: error: structure has no member named `area_size' queue.c:62: error: structure has no member named `full' queue.c:62: error: structure has no member named `head' queue.c:62: error: structure has no member named `tail' queue.c: In function `queue_delete': queue.c:71: error: structure has no member named `full' queue.c:74: error: structure has no member named `tail' queue.c:74: error: structure has no member named `tail' queue.c:74: error: structure has no member named `area_size' queue.c:79: error: structure has no member named `head' queue.c:79: error: structure has no member named `head' queue.c:79: error: structure has no member named `area_size' queue.c:80: error: structure has no member named `area_size' queue.c:85: error: structure has no member named `head' queue.c:85: error: structure has no member named `tail' queue.c:88: error: structure has no member named `arr' queue.c:88: error: structure has no member named `tail' queue.c:89: error: structure has no member named `arr' queue.c:89: error: structure has no member named `tail' queue.c:90: error: structure has no member named `tail' queue.c:91: error: structure has no member named `tail' queue.c:92: error: structure has no member named `tail' queue.c:92: error: structure has no member named `area_size' queue.c:96: error: structure has no member named `head' queue.c:97: error: structure has no member named `arr' queue.c:98: error: structure has no member named `arr' queue.c:99: error: structure has no member named `head' queue.c:100: error: structure has no member named `head' queue.c:100: error: structure has no member named `head' queue.c:100: error: structure has no member named `area_size' queue.c:101: error: structure has no member named `area_size' queue.c:103: error: structure has no member named `head' queue.c:103: error: structure has no member named `area_size' queue.c:103: error: structure has no member named `head' queue.c:103: error: structure has no member named `tail' queue.c: In function `queue_clear': queue.c:113: error: structure has no member named `head' queue.c:113: error: structure has no member named `tail' queue.c:114: error: structure has no member named `full' queue.c: In function `queue_count': queue.c:119: error: structure has no member named `area_size' queue.c:121: error: structure has no member named `full' queue.c:122: error: structure has no member named `tail' queue.c:122: error: structure has no member named `head' gmake[4]: *** [queue.o] Error 1 gmake[4]: Leaving directory `/tmp/dovecot-1.1.beta13/src/lib' gmake[3]: *** [all] Error 2 gmake[3]: Leaving directory `/tmp/dovecot-1.1.beta13/src/lib' gmake[2]: *** [all-recursive] Error 1 gmake[2]: Leaving directory `/tmp/dovecot-1.1.beta13/src' gmake[1]: *** [all-recursive] Error 1 gmake[1]: Leaving directory `/tmp/dovecot-1.1.beta13' gmake: *** [all] Error 2

2 1

[Dovecot] donations / wishlist
by Timo Sirainen 31 Dec '07

31 Dec '07

Since some people don't like Paypal and other people have been telling me for years to create Amazon wishlist, I figured I'd finally do it. http://dovecot.org/donate.html now contains URL to the wishlist. Currently it mostly contains all kinds of TV series DVDs (feel free to laugh at what I watch :), but I also managed to remember a couple of books I wanted.

3 4

Re: [Dovecot] auth-master permission error
by greno＠verizon.net 30 Dec '07

30 Dec '07

I just needed to restart postfix and it finds deliver. Gerry

1 0

Re: [Dovecot] auth-master permission error
by greno＠verizon.net 30 Dec '07

30 Dec '07

Ok, this turned out to be SELinux. If I turn off SELinux then I can start Dovecot using init.d. So now I tried to send a test mail using telnet: # telnet localhost smtp Trying 127.0.0.1... Connected to localhost. Escape character is '^]'. 220 grp-01-50-90.localdomain ESMTP Postfix ehlo example.com 250-grp-01-50-90.localdomain 250-PIPELINING 250-SIZE 10240000 250-VRFY 250-ETRN 250-ENHANCEDSTATUSCODES 250-8BITMIME 250 DSN mail from:<steve(a)example.com> 250 2.1.0 Ok rcpt to:<john(a)example.com> 250 2.1.5 Ok data 354 End data with <CR><LF>.<CR><LF> Hi John, just wanted to drop you a note. . 250 2.0.0 Ok: queued as 4F1D2D8055A quit 221 2.0.0 Bye Connection closed by foreign host. And the log: # tail -50 /var/log/maillog Dec 30 10:45:31 grp-01-50-90 dovecot: Dovecot v1.0.7 starting up Dec 30 10:45:31 grp-01-50-90 dovecot: auth-worker(default): mysql: Connected to 127.0.0.1 (mailserver) Dec 30 11:03:02 grp-01-50-90 postfix/smtpd[6942]: connect from localdomain.localhost[127.0.0.1] Dec 30 11:04:21 grp-01-50-90 postfix/smtpd[6942]: 4F1D2D8055A: client=localdomain.localhost[127.0.0.1] Dec 30 11:05:06 grp-01-50-90 postfix/cleanup[6967]: 4F1D2D8055A: message-id=<20071230160421.4F1D2D8055A(a)grp-01-50-90.localdomain> Dec 30 11:05:06 grp-01-50-90 postfix/qmgr[2123]: 4F1D2D8055A: from=<steve(a)example.com>, size=408, nrcpt=2 (queue active) Dec 30 11:05:06 grp-01-50-90 pipe[6982]: fatal: pipe_command: execvp /usr/lib/dovecot/deliver: No such file or directory Dec 30 11:05:06 grp-01-50-90 postfix/pipe[6980]: 4F1D2D8055A: to=<john(a)example.com>, relay=dovecot, delay=67, delays=67/0.19/0/0.1, dsn=4.3.0, status=deferred (temporary failure. Command output: pipe: fatal: pipe_command: execvp /usr/lib/dovecot/deliver: No such file or directory ) Dec 30 11:05:11 grp-01-50-90 postfix/smtp[6981]: 4F1D2D8055A: to=<jmiller(a)gmail.com>, orig_to=<john(a)example.com>, relay=gmail-smtp-in.l.google.com[72.14.203.27]:25, delay=71, delays=67/0.14/0.53/3.7, dsn=2.0.0, status=sent (250 2.0.0 OK 1199030710 o33si13384597rog.14) Dec 30 11:05:20 grp-01-50-90 postfix/smtpd[6942]: disconnect from localdomain.localhost[127.0.0.1] So I checked and 'deliver' is not in /usr/lib/dovecot. It is in /usr/libexec/dovecot. So how do I fix this? Here is what is in postfix master.cf: dovecot unix - n n - - pipe flags=DRhu user=vmail:vmail argv=/usr/libexec/dovecot/deliver -d ${recipient} So why is it referencing /usr/lib/dovecot/deliver ???? Thanks, Gerry

1 0

[Dovecot] auth-master permission error
by greno＠verizon.net 30 Dec '07

30 Dec '07

On F7, I get to where I have Postfix and Dovecot installed and configured, postfix check runs fine, but when I try to start Dovecot I'm getting a permission error. Here is the log entry: Dec 29 21:54:06 grp-01-50-90 dovecot: Dovecot v1.0.7 starting up Dec 29 21:54:06 grp-01-50-90 dovecot: Generating Diffie-Hellman parameters for the first time. This may take a while.. Dec 29 21:54:06 grp-01-50-90 dovecot: auth(default): bind(/var/run/dovecot/auth-master) failed: Permission denied Dec 29 21:54:06 grp-01-50-90 dovecot: auth(default): net_listen_unix(/var/run/dovecot/auth-master) failed: Permission denied Here are the permissions on the filesystem: # ls -ld /var/run/dovecot drwxr-xr-x 3 root dovecot 4096 2007-12-29 22:07 /var/run/dovecot And in the conf file there is this in the lda protocol: socket listen { master { path = /var/run/dovecot/auth-master mode = 0600 user = vmail } client { path = /var/spool/postfix/private/auth mode = 0660 user = postfix group = postfix } } What should I change to straighten out these permissions? I forgot to mention that when I try to start Dovecot that I get this message: dovecot dead but subsys locked I'm thinking it is just a side effect of the permissions issue. Anyway I tried setting perms to 777 on /var/run/dovecot but this didn't help. So still needing some hints. A clue. I can start Dovecot as 'root': # dovecot # ps -ef root 14164 1 0 00:07 ? 00:00:00 dovecot root 14165 14164 0 00:07 ? 00:00:00 dovecot-auth root 14166 14164 0 00:07 ? 00:00:00 dovecot-auth -w dovecot 14168 14164 0 00:07 ? 00:00:00 pop3-login dovecot 14169 14164 0 00:07 ? 00:00:00 pop3-login dovecot 14170 14164 0 00:07 ? 00:00:00 pop3-login dovecot 14171 14164 0 00:07 ? 00:00:00 imap-login dovecot 14172 14164 0 00:07 ? 00:00:00 imap-login dovecot 14173 14164 0 00:07 ? 00:00:00 imap-login maillog: Dec 30 00:07:40 grp-01-50-90 dovecot: Dovecot v1.0.7 starting up Dec 30 00:07:41 grp-01-50-90 dovecot: auth-worker(default): mysql: Connected to 127.0.0.1 (mailserver) But if I try to start it using init.d: # service dovecot start dovecot dead but subsys locked maillog: Dec 30 00:12:49 grp-01-50-90 dovecot: Auth process died too early - shutting down Dec 30 00:12:49 grp-01-50-90 dovecot: auth(default): bind(/var/run/dovecot/auth-master) failed: Permission denied Dec 30 00:12:49 grp-01-50-90 dovecot: auth(default): net_listen_unix(/var/run/dovecot/auth-master) failed: Permission denied Dec 30 00:12:49 grp-01-50-90 dovecot: child 14301 (auth) returned error 89 ???? Gerry

1 0

[Dovecot] building dovecot-sieve against installed dovecot
by Geert Hendrickx 30 Dec '07

30 Dec '07

Hi Timo, may I request once more to consider the attached patch for dovecot 1.1, it enables the sieve plugin (incl. sievec and sieved, needed for pysieved) to be built against an installed dovecot package, if --enable-header-install additionally installs the liblib.a library in the same directory as dovecot-config. I have included this patch in the pkgsrc dovecot 1.1 package a while ago. Geert

1 0