- dovecot - dovecot.org

[Dovecot] HG Compilation error
by Joan Moreau 23 May '11

23 May '11

Hi, Here the error I get, when compiling from Mercurial repository Making all in ipc make[3]: Entering directory `/data/admin/src/mail/dovecot2/dovecot-2.0/src/ipc' MAKE[3]: *** NO RULE TO MAKE TARGET `ALL'. STOP. make[3]: Leaving directory `/data/admin/src/mail/dovecot2/dovecot-2.0/src/ipc' make[2]: *** [all-recursive] Error 1 make[2]: Leaving directory `/data/admin/src/mail/dovecot2/dovecot-2.0/src' make[1]: *** [all-recursive] Error 1 make[1]: Leaving directory `/data/admin/src/mail/dovecot2/dovecot-2.0' make: *** [all] Error 2 How to fix that ? thx jm

1 0

[Dovecot] zlib
by Daniel L. Miller 23 May '11

23 May '11

How can I enable zlib for reading compressed messages but not writing? -- Daniel

3 2

[Dovecot] PERMANENTFLAGS response if ACL seen/write rights are missing
by Michael M Slusarz 23 May '11

23 May '11

In dovecot 2.0.13, if a user does not have either s or w ACL rights on a mailbox, PERMANENTFLAGS correctly indicates that the mailbox has not permanent flags: * OK [PERMANENTFLAGS ()] Read-only mailbox. However, if one is set but not the other, the PERMANENTFLAGS list is not being pruned appropriately. For example, for a mailbox with the following flags: * FLAGS (\Answered \Flagged \Deleted \Seen \Draft $Forwarded $Junk) If s is set, but not w, I would expect PERMANENTFLAGS to look like: * OK [PERMANENTFLAGS (\Seen)] If w is set, but not s, I would expect this: * OK [PERMANENTFLAGS (\Answered \Flagged \Deleted \Draft $Forwarded $Junk \*)] However, in both cases I currently see all flags in the mailbox: * OK [PERMANENTFLAGS (\Answered \Flagged \Deleted \Seen \Draft $Forwarded $Junk \*)] michael

2 1

[Dovecot] Hide INBOX prefix on shared mailboxes
by Martin Werthmöller 23 May '11

23 May '11

Hello List, We've upgraded our Dovecot system from 1.2.4 to 2.0.12. If someone now accesses an inbox of another user at the shared namespace, the folder will be shown as: shared/martin/INBOX The 1.2 installation has shown the folder like shared/martin Is it possible to achieve the "old" behavior? ** Configuration of the namespaces * dovecot 1.2 namespace private { separator = / prefix = #location defaults to mail_location. inbox = yes } namespace shared { separator = / prefix = shared/%%n location = maildir:%%h:INDEX=~/shared/%%n/ subscriptions = no list = children } * dovecot 2.0 namespace { type = private separator = / prefix = #location defaults to mail_location. inbox = yes } namespace { type = shared separator = / prefix = shared/%%n/ location = maildir:%%h:INDEX=~/shared/%%n subscriptions = no list = children } Best regards, Martin Werthmoeller -- LWsystems GmbH & Co. KG ++ http://www.lw-systems.de/impressum Phone: +49 +5455 932132 ++ Fax: +49 +5455 932099 Your experts for Linux, Open Source and IT security. ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ LWsystems GmbH & Co. KG Headquaters: Tegelerweg 11, D-49186 Bad Iburg, Germany Phone +49 (0)5455 932132 fax +49 (0)5455 932099 register of commerce: Amtsgericht Osnabrück, hra 110668 VAT no. DE23852211 Managing Directors: Dipl.-Ing. Ansgar H. Licher, Bad Iburg, Germany Dipl.-Ing. Martin Werthmöller, Ibbenbüren, Germany For further company details please look at: http://www.lw-systems.de/impressum ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

2 1

Re: [Dovecot] dovecot-antispam dependencies
by Sven Schwyn 23 May '11

23 May '11

> I would like to see a tagged version too, but trunk works fine here. > Since the OP mentions Gentoo, my latest ebuild for dovecot-antispam for > 2.x is attached. The thing with Gentoo: Unless a tagged version is created, it's very unlikely that the Gentoo guys update the current ebuild (aka: package) and thus the incompatibility between the dovecot and the dovecot-antispam packages in the package tree remains. Thanks for the ebuild. Cheers, -sven

2 1

[Dovecot] Debian or Ubuntu packages ?
by Frank Bonnet 23 May '11

23 May '11

Hello Anyone knows which version of Dovecot 2 are availables on Squeeze Debian or Ubuntu server 10.04 LTS ? Also what is the Linux OS that is must up to date ? Thanks

2 1

[Dovecot] Global fields for passwd-file database
by Sergey Urushkin 23 May '11

23 May '11

Is there a way to specify global fields for passwd-file DB? Currently interested in "home" for userdb and "allow_nets" for passworddb. The next doesn't work, of course: passdb passwd-file { args = username_format=%n allow_nets=127.0.0.1 /etc/dovecot/dovecot.passwd.%d } userdb passwd-file { args = username_format=%n home=/var/mail/%d/%n /etc/dovecot/dovecot.passwd.%d } -- Best regards, Sergey Urushkin

2 4

[Dovecot] dovecot-antispam dependencies
by Sven Schwyn 22 May '11

22 May '11

Hi There's currently a version block for the dovecot and dovecot-antispam packages in Gentoo. Dependencies indicate that dovecot-2.0.11 does not accept dovecot-antispam-1.3. Is this correct or should it work? If not: How about the current rc of version 1.4? Cheers, -sven

4 5

[Dovecot] fts squat index file not appearing
by Cor Bosman 22 May '11

22 May '11

Hey all, im experimenting with squat for a small project but am not having much luck. Debugging tells me squat is being loaded, but the index.search files are not appearing after TEXT/BODY commands. Squat plugin was added to config as well. Anyone have an idea? Cor

3 9

[Dovecot] hardluck w/ sieve
by errno 22 May '11

22 May '11

I've followed the docs here: http://wiki.dovecot.org/LDA/Sieve/Dovecot ... in particular, the 'Per-user Sieve script location' scenario. However, I'm unable to get any behavior that indicates that sieve is functioning correctly - well, functioning _at_all_ would be more accurate. Relevant dovecot.conf: protocol lda { ... mail_plugins = sieve } auth default { ... passdb passwd-file { args = /var/vmail/passwd } userdb static { args = uid=vmail gid=vmail home=/var/vmail/%d/%u } } plugin { sieve = /var/sieve-scripts/%d/%u.sieve } ls -l /var/sieve-scripts/domain.com/user.sieve -rw-r--r-- 1 vmail vmail 224 May 22 00:18 /var/sieve-scripts/domain/user.sieve I of course have an extremely simple rule in the example 'user.sieve' file; but for whatever reasons, no filtering is occurring. Is there anything obvious in my configuration that's broke? How best to debug? Thankyou!

1 1

Re: [Dovecot] fts crash
by Daniel L. Miller 22 May '11

22 May '11

On 5/21/2011 8:17 PM, Daniel L. Miller wrote: > On 5/21/2011 8:04 PM, Daniel L. Miller wrote: >> I've completed my mailbox rebuild - theoretically I should be free of >> corruption. I used dsync to export from mdbox to maildir (so should >> be clean) then used a virtual machine with Dovecot to import back to >> mdbox in another location. So...theoretically I should be free of >> all corruption now... >> > Perhaps I spoke too soon... > > May 21 20:13:38 bubba dovecot: imap(emiller(a)amfes.com): Error: FETCH > [] for mailbox INBOX UID 1274 got too little data: 4443 vs 5253 > May 21 20:13:38 bubba dovecot: imap(emiller(a)amfes.com): Error: > Corrupted index cache file > /var/mail/amfes.com/emiller/mdbox/mailboxes/INBOX/dbox-Mails/dovecot.index.cache: > Broken virtual size for mail UID 1274 > May 21 20:13:38 bubba dovecot: imap(emiller(a)amfes.com): Disconnected: > FETCH failed bytes=103/5395 > > Note that the above logged error appears from a MUA accessing the mailbox - no log entries from a doveadm search text command. -- Daniel

1 0

Re: [Dovecot] fts crash
by Daniel L. Miller 22 May '11

22 May '11

On 5/21/2011 8:04 PM, Daniel L. Miller wrote: > I've completed my mailbox rebuild - theoretically I should be free of > corruption. I used dsync to export from mdbox to maildir (so should > be clean) then used a virtual machine with Dovecot to import back to > mdbox in another location. So...theoretically I should be free of all > corruption now... > Perhaps I spoke too soon... May 21 20:13:38 bubba dovecot: imap(emiller(a)amfes.com): Error: FETCH [] for mailbox INBOX UID 1274 got too little data: 4443 vs 5253 May 21 20:13:38 bubba dovecot: imap(emiller(a)amfes.com): Error: Corrupted index cache file /var/mail/amfes.com/emiller/mdbox/mailboxes/INBOX/dbox-Mails/dovecot.index.cache: Broken virtual size for mail UID 1274 May 21 20:13:38 bubba dovecot: imap(emiller(a)amfes.com): Disconnected: FETCH failed bytes=103/5395 -- Daniel

1 0

[Dovecot] fts crash
by Daniel L. Miller 22 May '11

22 May '11

I've completed my mailbox rebuild - theoretically I should be free of corruption. I used dsync to export from mdbox to maildir (so should be clean) then used a virtual machine with Dovecot to import back to mdbox in another location. So...theoretically I should be free of all corruption now... Running an fts update - "doveadm search text -u user(a)domain.com xyzzyx" works on some users - other mailboxes crash with: doveadm(dmiller(a)amfes.com): Panic: file squat-trie.c: line 876 (squat_build_word): assertion failed: (i + bytelen <= size) doveadm(dmiller(a)amfes.com): Error: Raw backtrace: /usr/local/lib/dovecot/libdovecot.so.0(+0x3ccca) [0x7ffee92b6cca] -> /usr/local/lib/dovecot/libdovecot.so.0(default_fatal_handler+0x32) [0x7ffee92b6db2] -> /usr/local/lib/dovecot/libdovecot.so.0(+0x16dda) [0x7ffee9290dda] -> /usr/local/lib/dovecot/lib21_fts_squat_plugin.so(+0x5bbd) [0x7ffee6607bbd] -> /usr/local/lib/dovecot/lib21_fts_squat_plugin.so(squat_trie_build_more+0x153) [0x7ffee6607d13] -> /usr/local/lib/dovecot/lib20_fts_plugin.so(+0x59bc) [0x7ffee68159bc] -> /usr/local/lib/dovecot/libdovecot-storage.so.0(mailbox_search_next_nonblock+0x20) [0x7ffee99ac180] -> /usr/local/lib/dovecot/libdovecot-storage.so.0(mailbox_search_next+0x26) [0x7ffee99ac1d6] -> doveadm() [0x40ce47] -> doveadm() [0x409304] -> doveadm(doveadm_mail_single_user+0x8c) [0x40961c] -> doveadm() [0x409817] -> doveadm(doveadm_mail_try_run+0x141) [0x409c31] -> doveadm(main+0x3b1) [0x40dfd1] -> /lib/libc.so.6(__libc_start_main+0xfe) [0x7ffee8b09d8e] -> doveadm() [0x408c09] Aborted -- Daniel

1 0

[Dovecot] Behavior difference in mbox versus Maildir listing
by Bruno Prémont 22 May '11

22 May '11

Hi, My MUA (claws-mail) is having a hard time listing directories for a mail account with two namespaces, one of which using mbox and the other one using maildir to store mails. Let's call the namespaces "#mbox." and "#maildir." and have "." as separator. Assume I have the following folder hierarchy: $namespace $namespace folder $namespace folder folder1a $namespace folder folder1b $namespace folder folder1c The resulting IMAPv4 session is: mb1 LIST "" "#mbox.%" * LIST (\Noselect \HasChildren) "." "#mbox.folder" mb1 OK List completed. mb2 LIST "" "#mbox.folder.%" * LIST (\Noselect \HasChildren) "." "#mbox.folder." * LIST (\NoInferiors \UnMarked) "." "#mbox.folder.folder1a" * LIST (\NoInferiors \UnMarked) "." "#mbox.folder.folder1b" * LIST (\NoInferiors \UnMarked) "." "#mbox.folder.folder1c" mb2 OK List completed. md1 LIST "" "#maildir.%" * LIST (\HasChildren) "." "#maildir.folder" md1 OK List completed. md2 LIST "" "#maildir.folder.%" * LIST (\HasNoChildren) "." "#maildir.folder.folder1a" * LIST (\HasNoChildren) "." "#maildir.folder.folder1b" * LIST (\HasNoChildren) "." "#maildir.folder.folder1c" md2 OK List completed. Notice the extra presence of listed folder itself with trailing "." in mb2 that has no equivalent in md2! Is this expected listing behavior? If so, why the differing behavior between both storage engines? Affected dovecot versions: at least 1.1.16 and 2.0.11 (installed from Gentoo packages) System is x86 on XFS Thanks, Bruno

2 4

[Dovecot] IMAP COMPRESS not announced while using imap_zlib plugin
by Henrik Larsson 21 May '11

21 May '11

I'm trying to enable the IMAP COMPRESS plugin listed here: http://wiki2.dovecot.org/Plugins/Compress I have added zlib globally and imap_zlib to the imap protocol. This is the output from doveconf -n with regards to mail_plugins: --cut-- mail_plugins = zlib protocol imap { mail_plugins = zlib imap_zlib } --cut But it seem like the feature is not announced when connecting to the IMAP server: * OK [CAPABILITY IMAP4rev1 LITERAL+ SASL-IR LOGIN-REFERRALS ID ENABLE IDLE STARTTLS LOGINDISABLED AUTH=DIGEST-MD5 AUTH=CRAM-MD5] Dovecot ready. I would expect something like COMPRESS=DEFLATE. I haven't enabled any compression for the Maildir files, zlib_save_level and zlib_save is not set. Does IMAP COMPRESS only work if the mailbox is compressed? Best regards Henrik Larsson

2 3

Re: [Dovecot] How to stop mail_executable from cwd to ~home
by Joseph Tam 21 May '11

21 May '11

Gary Duncan <gduncan(a)engr.UVic.CA> writes: > In our environment home directories are auto-mounted via /home/<user> > including on the server provided mail. > Within the various mail services though we try to isolate > and override with local /mail/home/<user> > > Works well except that dovecot still wants to cd to the real home > triggering a useless and potentially hindering automount This becomes really apparent if you have an organization wide-mailing list, and one delivery to it causes a flurry of automounts. I similarly replace per-user mounts with a home mount bundle. > when it invokes the imap or pop3 process specified by mail_executable, > ie an lsof of the process shows cwd of /home/<user> and the automounted home. I see the same behaviour in 2.0.13, which process tracing of imap shows more clearly (/nfs/user is per user mount, /nfs/home/user is user home bundle) ... 4087: getuid() = 12345 [12345] 4087: chdir("/nfs/test") = 0 4087: stat64("/nfs/home/test/mail", 0xFFBFF6C0) = 0 4087: stat64("/nfs/home/test/mail", 0xFFBFF5A0) = 0 4087: stat64("/nfs/home/test/mail", 0xFFBFF6C0) = 0 ... This happens fairly early after imap-login forks and execs the imap process. I'll see if I can find it after building a debug version, but I think Timo will beat me to this. Joseph Tam <jtam.home(a)gmail.com>

2 2

[Dovecot] dovecot & OCFS2 Cluster
by Osvaldo Alvarez Pozo 20 May '11

20 May '11

hi all We have an ocfs2 cluster compose of 4 Debian lenny serveurs wich have access to an ISCSI LUN we have create a partition on this Lun and formated this partition as OCFS2. 2 serveurs does mail delivery (SMTP) and the two other are pop/imap servers. The smtp servers use dovecot LDA to deliver to mailboxes. La version de dovecot is 1.2.13, ldirectord balance conexion to the servers(pop/pops/imap/imaps to the two imap/pop serveurs) (smtp to the two smtp servers). this is a part of my dovecot.conf mail_location = maildir:/var/vmail/%d/%u/Maildir mail_access_groups = mail first_valid_uid = 5000 last_valid_uid = 5000 mail_max_userip_connections = 100 maildir_copy_with_hardlinks = yes disable_plaintext_auth = no dotlock_use_excl=yes mmap_disable = yes protocols = imap imaps pop3 pop3s managesieve protocol imap { mail_plugins = quota imap_quota imap_client_workarounds = outlook-idle delay-newmail } protocol pop3 { mail_plugins = quota pop3_client_workarounds = outlook-no-nuls oe-ns-eoh pop3_uidl_format = %08Xu%08Xv } protocol lda { mail_plugins = quota sieve log_path = /var/log/dovecot-deliver.log info_log_path = /var/log/dovecot-deliver.log } protocol managesieve { managesieve_implementation_string = dovecot } auth default { mechanisms = plain login passdb sql { args = /etc/dovecot/sql.conf } userdb prefetch { } userdb sql { args = /etc/dovecot/sql.conf } user = nobody socket listen { master { path = /var/run/dovecot/auth-master mode = 0660 user = vmail group = mail } client { path = /var/spool/postfix/private/auth mode = 0660 user = postfix group = mail } We are having severals problems from "cpu stuck for 61 seconds" to "too many connexion". I wonder if there is a configuation type of dovecot when using ocfs2. In tje dovecot site they give advices about how to configure dovecot when using NFS, but not about OCFS2. Somme people say that lda shuld not be used. Any help please? Thanks nebano

7 17

[Dovecot] Migrate to new server without raw copy
by Daniel L. Miller 20 May '11

20 May '11

I've setup a new virtual machine to run my mail servers. Dovecot is installed and talking with the LDAP server for the user list. Now the question is how to migrate the data from the old Dovecot to the new. The data is stored in mdbox, with some possible corruption. Accordingly, any form of simple file copy is not the answer - I need the messages to be processed by something and then stored fresh on the new server. I do have NFS access both ways if that does anything. I tried imapsync - but it quickly broke on some of the messages. Is dsync the answer? Or do I use a MUA and drag-n-drop the messages a batch at a time between the servers? -- Daniel

3 2

[Dovecot] xi.rename-it.nl down?
by Jim Knuth 20 May '11

20 May '11

Hello, http://xi.rename-it.nl/debian/dists/stable-auto/dovecot-2.0 not available? -- Mit freundlichen Grüßen, with kind regards, Jim Knuth --------- Mit dem Geist ist es wie mit dem Magen: Mann kann ihm nur Dinge zumuten, die er verdauen kann. [Churchill]

2 2

[Dovecot] Released Pigeonhole Sieve v0.1.19 and ManageSieve v0.11.13 for Dovecot v1.2.17
by Stephan Bosch 20 May '11

20 May '11

Hello Dovecot users, As promised, I hereby release new versions of Sieve and ManageSieve for Dovecot v1.2. These releases consist entirely of (backported) bugfixes and introduce no new features. There is a good chance that these are the last releases for Dovecot v1.2. Changelog Sieve v0.1.19: - Enotify extension: fixed inappropriate return type in mailto URI parse function, also fixing ARM compiler warning. - Vacation extension: fixed handling of sendmail errors. It produced an additional confusing success message in case of error. - Removed header MIME-decoding to fix erroneous address parsing. Applies to address test and vacation command. Changelog ManageSieve v0.11.13: - ManageSieve: fixed bug in UTF-8 checking of string values. The releases are available as follows: Sieve http://www.rename-it.nl/dovecot/1.2/dovecot-1.2-sieve-0.1.19.tar.gz http://www.rename-it.nl/dovecot/1.2/dovecot-1.2-sieve-0.1.19.tar.gz.sig ManageSieve http://www.rename-it.nl/dovecot/1.2/dovecot-1.2-managesieve-0.11.13.tar.gz http://www.rename-it.nl/dovecot/1.2/dovecot-1.2-managesieve-0.11.13.tar.gz.… ManageSieve patch http://www.rename-it.nl/dovecot/1.2/dovecot-1.2.17-managesieve-0.11.13.diff… http://www.rename-it.nl/dovecot/1.2/dovecot-1.2.17-managesieve-0.11.13.diff… Refer to http://pigeonhole.dovecot.org and the Dovecot wiki for more information. Don't hesitate to notify me when there are any problems. Regards, -- Stephan Bosch stephan(a)rename-it.nl

1 0

[Dovecot] How to stop mail_executable from cwd to ~home
by Gary Duncan 19 May '11

19 May '11

In our environment home directories are auto-mounted via /home/<user> including on the server provided mail. Within the various mail services though we try to isolate and override with local /mail/home/<user> Works well except that dovecot still wants to cd to the real home triggering a useless and potentially hindering automount when it invokes the imap or pop3 process specified by mail_executable, ie an lsof of the process shows cwd of /home/<user> and the automounted home. It does this even though home is properly overridden within. I suspect this is part of changing to invoke as the user as the *-login process are ok but then they are still running as dovecot. Various recent attempts to explicitly respecify HOME for mail_executable via a wrapper script or using env have been to no avail (as seen below). How can I resolve? And no I don't just want to override /home at the system level. Thanks -- Gary # 1.0.9: /etc/dovecot.conf base_dir: /var/run/dovecot/ syslog_facility: local1 protocols: imap imaps pop3 pop3s listen(default): *:143 listen(imap): *:143 listen(pop3): *:110 ssl_listen(default): *:993 ssl_listen(imap): *:993 ssl_listen(pop3): *:995 ssl_ca_file: /etc/ssl/certs/gd_bundle.crt ssl_cert_file: /etc/ssl/certs/engr.uvic.ca.crt ssl_key_file: /etc/ssl/private/engineeringwildcard.key ssl_parameters_regenerate: 24 disable_plaintext_auth: no login_dir: /var/run/dovecot/login login_executable(default): /usr/libexec/dovecot/imap-login login_executable(imap): /usr/libexec/dovecot/imap-login login_executable(pop3): /usr/libexec/dovecot/pop3-login login_log_format_elements: %u [%r] %c login_process_size: 32 login_processes_count: 8 login_max_processes_count: 150 verbose_proctitle: yes first_valid_uid: 100 default_mail_env: mbox:/mail/home/%u/mail/:INBOX=/mail/boxes/%u:INDEX=/mail/indexes/%u mail_location: mbox:/mail/home/%u/mail/:INBOX=/mail/boxes/%u:INDEX=/mail/indexes/%u mbox_read_locks: fcntl dotlock mbox_write_locks: fcntl dotlock mail_executable(default): /bin/env 'HOME=/mail/home/$USER' /usr/libexec/dovecot/imap mail_executable(imap): /bin/env 'HOME=/mail/home/$USER' /usr/libexec/dovecot/imap mail_executable(pop3): /usr/libexec/dovecot/pop3-home mail_plugin_dir(default): /usr/lib/dovecot/imap mail_plugin_dir(imap): /usr/lib/dovecot/imap mail_plugin_dir(pop3): /usr/lib/dovecot/pop3 imap_client_workarounds(default): delay-newmail outlook-idle netscape-eoh tb-extra-mailbox-sep imap_client_workarounds(imap): delay-newmail outlook-idle netscape-eoh tb-extra-mailbox-sep imap_client_workarounds(pop3): outlook-idle pop3_uidl_format(default): pop3_uidl_format(imap): pop3_uidl_format(pop3): %v.%u pop3_client_workarounds(default): pop3_client_workarounds(imap): pop3_client_workarounds(pop3): oe-ns-eoh outlook-no-nuls auth default: passdb: driver: pam userdb: driver: passwd args: home=/mail/home/%u plugin: home: /mail/home/%u

2 1

[Dovecot] v2.0.13 released
by Timo Sirainen 19 May '11

19 May '11

http://dovecot.org/releases/2.0/dovecot-2.0.13.tar.gz http://dovecot.org/releases/2.0/dovecot-2.0.13.tar.gz.sig I've almost managed to read my email backlog, but there are still some unanswered mails. Feel free to resend if you think I should have answered some of your mails. The most important changes since v2.0.12: + Added "doveadm index" command to add unindexed messages into index/cache. If full text search is enabled, it also adds unindexed messages to the fts database. + added "doveadm director dump" command. + pop3: Added support for showing messages in "POP3 order", which can be different from IMAP message order. This can be useful for migrations from other servers. Implemented it for Maildir as 'O' field in dovecot-uidlist. - doveconf: Fixed a wrong "subsection has ssl=yes" warning. - mdbox purge: Fixed wrong warning about corrupted extrefs. - sdbox: INBOX GUID changed when INBOX was autocreated, leading to trouble with dsync. - script-login binary wasn't actually dropping privileges to the user/group/chroot specified by its service settings. - Fixed potential crashes and other problems when parsing header names that contained NUL characters.

5 12

[Dovecot] integrating procmail
by errno 19 May '11

19 May '11

Hello, list members! I'm new to dovecot, and haven't needed to maintain an email server instance for quite some time. I recently got a fairly simple postfix + dovecot installation functional as needed, however I now need to get procmail filtering incoming mail, and after reading various docs and wikis, I find that I'm still having a tough time feeling confident on how best to approach it in the simplest manner. (this is for a small installation.... 10 email accounts, max). Below, I've provide the relevant snippets of my current functional configuration; how best to integrate procmail into the mix? /etc/postfix/main.cf: ... alias_maps = hash:/etc/mail/aliases local_recipient_maps = hash:/etc/postfix/vmailbox, $alias_maps virtual_transport = dovecot virtual_mailbox_domains = $mydomain virtual_mailbox_base = /var/vmail/ virtual_mailbox_maps = hash:/etc/postfix/vmailbox virtual_minimum_uid = 500 virtual_uid_maps = static:501 virtual_gid_maps = static:501 ... /etc/postfix/master.cf: ... dovecot unix - n n - - pipe flags=DRhu user=vmail:vmail argv=/usr/libexec/dovecot/deliver -f ${sender} - d ${recipient} ... /etc/dovecot/dovecot.conf: ... mail_location = maildir:~/Maildir protocol lda { sendmail_path = /usr/sbin/sendmail } auth default { mechanisms = plain passdb passwd-file { args = /var/vmail/passwd } userdb static { args = uid=vmail gid=vmail home=/var/vmail/%d/%u } socket listen { master { path = /var/run/dovecot/auth-master mode = 0600 user = vmail group = vmail } } } ... Thankyou for any tips, much appreciated!

8 8

[Dovecot] alternative storage taken from sql
by Pierre 19 May '11

19 May '11

Hi list, I'm looking for a simple way to define alternative storage (ALT parameter in mail_location) from userdb query. dovecot v2 Is there a simple way to handle this ? Thanks a lot Pierre PS: I'm talking about this functionnality: http://wiki2.dovecot.org/Tools/Doveadm/Altmove

3 2

Re: [Dovecot] Posfix and Dovecot (dovecot like LDA) and no space left on the disk
by Petr Svacina 19 May '11

19 May '11

Here is the logs: May 8 06:00:36 mailserver dovecot: deliver(sazima(a)vendys.net): msgid=<3DEF56667E754F24B163C9767422C9A9(a)dlllk.local>: save failed to INBOX: Not enough disk space May 8 06:00:36 mailserver dovecot: deliver(sazima(a)vendys.net): msgid=<3DEF56667E754F24B163C9767422C9A9(a)dlllk.local>: rejected: Not enough disk space May 8 06:00:36 mailserver postfix/pickup[27640]: D8B242F9E1: uid=150 from=<> May 8 06:00:36 mailserver postfix/pipe[27978]: 4B3A72F8C0: to=<sazima(a)vendys.net>, relay=dovecot, delay=11, delays=11/0.02/0/0.04, dsn=2.0.0, status=sent (delivered via dovecot service) May 8 06:00:36 mailserver postfix/qmgr[18807]: 4B3A72F8C0: removed Problem is, that: 1. spool HAVE ENOUGH space (so postfix has no problem keeps the message in the spool) 2. postfix forward message to dovecot 3. dovecot accept message, but can not deliver to /home/vmail, because there is no space :-) 4. so dovecot lost/delete/refuse message and tells postfix - everything is Ok ? 5. postfix cleans qmgr (bacause message has been forward to LDA succesfully I suppose :-) ) Thanks Peter > > On Mon, 2011-05-09 at 17:37 +0200, Petr Svacina wrote: > >> If my server is out of space (disk full) and the postfix is LDA, the >> new messages a deffered or refused,so postfix send 450 to sender ... >> But When I use dovecot (1.2.16) like LDA, postfix accept message (even >> there is no space), forward to dovecot, dovecot REFUSE the message and >> message is lost ! > > Dovecot deliver should fail with tempfail, which Postfix should notice > and forward to the original sender. If deliver doesn't return tempfail, > it's a bug. I'd like to see Postfix logs of when this problem happens. > > -- Tato zprava byla prohledana na vyskyt viru a nebezpecneho obsahu antivirovym systemem MailScanner a zda se byt cista.

4 5

[Dovecot] Dovecot deliver
by Gonzalo Rodriguez 19 May '11

19 May '11

Hi all, I have a problem with my dovecot/postfix configuration: here is my dovecot -n # 1.2.16: /etc/dovecot.conf Warning: fd limit 128 is lower than what Dovecot can use under full load (more than 768). Either grow the limit or change login_max_processes_count and max_mail_processes settings # OS: OpenBSD 4.9 i386 nfs base_dir: /var/dovecot/ log_path: /var/log/dovecot protocols: imaps pop3s login_dir: /var/dovecot/login login_executable(default): /usr/local/libexec/dovecot/imap-login login_executable(imap): /usr/local/libexec/dovecot/imap-login login_executable(pop3): /usr/local/libexec/dovecot/pop3-login login_user: _dovecot mail_location: maildir:/var/www/datos/correo/foobar.com.ar/%n:LAYOUT=fs mail_debug: yes mail_nfs_storage: yes mail_nfs_index: yes mbox_write_locks: fcntl mail_executable(default): /usr/local/libexec/dovecot/imap mail_executable(imap): /usr/local/libexec/dovecot/imap mail_executable(pop3): /usr/local/libexec/dovecot/pop3 mail_plugin_dir(default): /usr/local/lib/dovecot/imap mail_plugin_dir(imap): /usr/local/lib/dovecot/imap mail_plugin_dir(pop3): /usr/local/lib/dovecot/pop3 imap_client_workarounds(default): delay-newmail outlook-idle netscape-eoh tb-extra-mailbox-sep imap_client_workarounds(imap): delay-newmail outlook-idle netscape-eoh tb-extra-mailbox-sep imap_client_workarounds(pop3): pop3_client_workarounds(default): pop3_client_workarounds(imap): pop3_client_workarounds(pop3): outlook-no-nuls oe-ns-eoh lda: mail_plugins: sieve postmaster_address: postmaster(a)foobar.com.ar log_path: /var/log/dovecot-deliver-errors.log info_log_path: /var/log/dovecot-deliver.log auth default: mechanisms: login plain verbose: yes debug: yes debug_passwords: yes passdb: driver: bsdauth userdb: driver: static args: uid=vmail gid=vmail home=/var/www/datos/correo/foobar.com.ar/%n, allow_all_users=yes socket: type: listen client: path: /var/spool/postfix/private/auth mode: 432 user: _postfix group: _postfix master: path: /var/dovecot/auth-master mode: 384 user: vmail group: vmail plugin: sieve_global_dir: /var/sieve sieve_global_path: /var/sieve/global-default.sieve sieve: /var/sieve/%n.sieve I use bsdauth to system users auth againts Active-Directory, and I use dovecot to deliver the mails, in my postfix master.cf I have this: ## Deliver con Dovecot en ## Mailboxes dovecot unix - n n - - pipe flags=DRhu user=vmail:vmail argv=/usr/local/libexec/dovecot/deliver -f ${sender} -d ${recipient} The problem is I don't any process like this: pipe -n dovecot -t unix flags=DRhu user=vmail /usr/local/libexec/dovecot/deliver -f ${sender} -d ${recipient} And in the dovecot log I don't see anything, but in maillog I have: May 18 09:49:35 FOOBAR-0010 postfix/local[16584]: 8808D26125: to=<gonzalor(a)foobar.com.ar>, relay=local, delay=0.92, delays=0.91/0.01/0/0, dsn=2.0.0, status=sent (delivered to mailbox) But the mail it's not in the mailbox, what is wrong? any hint? the storage is a NFS with centos. cheers

3 7

[Dovecot] Dovecot 2.0 (2.0.11) na nfs quota
by Bartłomiej Solarz-Niesłuchowski 18 May '11

18 May '11

Good Morning! I have problems with setup imap quota with mailboxes on nfs I use dovecot 2.0.11, below dovecot.conf + extract from log: # 2.0.9: /etc/dovecot.conf.rpmsave # OS: Linux 2.6.35.11-83.fc14.x86_64 x86_64 Fedora release 14 (Laughlin) mail_plugins = acl quota zlib trash auth_cache_size = 8 k dotlock_use_excl = yes mail_location = maildir:~/Maildir:INBOX=/var/spool/mail/%u mail_nfs_index = yes mail_fsync=always mail_nfs_storage = yes mail_privileged_group = mail mmap_disable = yes ssl_cert = </etc/pki/tls/certs/ipop3d.pem ssl_key = </etc/pki/tls/certs/ipop3d.pem passdb { args = cache_key=%u%r%l max_requests=256 driver = pam } protocols = imap pop3 service auth { client_limit = 5248 user = root } service anvil { client_limit=1155 } service imap-login { client_limit = 256 inet_listener imap { port = 0 } inet_listener imaps { address = [::], * port = 993 } process_limit = 1024 service_count = 0 } protocol imap { ssl_cert = </etc/pki/tls/certs/imapd.pem ssl_key = </etc/pki/tls/certs/imapd.pem mail_plugins = $mail_plugins imap_quota mail_debug=yes } service imap { process_limit = 2048 } service pop3-login { client_limit = 256 inet_listener pop3 { port = 0 } inet_listener pop3s { address = [::], * port = 995 } process_limit = 128 service_count = 0 } protocol pop3 { ssl_cert = </etc/pki/tls/certs/ipop3d.pem ssl_key = </etc/pki/tls/certs/ipop3d.pem } service pop3 { process_limit = 2048 } userdb { driver = passwd } plugin { quota = fs:Disk quota:user quota_warning = storage=95%% quota-warning 95 %u quota_warning2 = storage=80%% quota-warning 80 %u } service quota-warning { executable = script /usr/local/bin/quota-warning.sh # use some unprivileged user for executing the quota warnings user = dovenull unix_listener quota-warning { } } Mar 9 09:36:06 dervish dovecot: imap-login: Login: user=<solarz>, method=PLAIN, rip=213.135.34.118, lip=213.135.44.54, mpid=4264, TLS Mar 9 09:36:06 dervish dovecot: imap(solarz): Debug: Effective uid=1761, gid=101, home=/home/staff/solarz Mar 9 09:36:06 dervish dovecot: imap(solarz): Debug: acl: No acl setting - ACLs are disabled Mar 9 09:36:06 dervish dovecot: imap(solarz): Debug: Quota root: name=Disk quota backend=fs args=user Mar 9 09:36:06 dervish dovecot: imap(solarz): Debug: Quota warning: bytes=0 (95%) messages=0 reverse=no command=quota-warning 95 solarz Mar 9 09:36:06 dervish dovecot: imap(solarz): Debug: Quota warning: bytes=0 (80%) messages=0 reverse=no command=quota-warning 80 solarz Mar 9 09:36:06 dervish dovecot: imap(solarz): Debug: maildir++: root=/home/staff/solarz/Maildir, index=, control=, inbox=/var/spool/mail/solarz Mar 9 09:36:06 dervish dovecot: imap(solarz): Debug: fs quota add mailbox dir = /home/staff/solarz/Maildir Mar 9 09:36:06 dervish dovecot: imap(solarz): Debug: fs quota block device = oceanic:/home7 Mar 9 09:36:06 dervish dovecot: imap(solarz): Debug: fs quota mount point = /home7 Mar 9 09:36:06 dervish dovecot: imap(solarz): Debug: fs quota mount type = nfs Mar 9 09:36:06 dervish dovecot: imap(solarz): Debug: trash: No trash setting - plugin disabled Mar 9 09:36:06 dervish dovecot: imap(solarz): Error: quotactl(Q_GETQUOTA, oceanic:/home7) failed: No such file or directory Mar 9 09:36:06 dervish dovecot: imap(solarz): Error: quotactl(Q_GETQUOTA, oceanic:/home7) failed: No such file or directory Mar 9 09:36:06 dervish dovecot: imap(solarz): Error: quotactl(Q_GETQUOTA, oceanic:/home7) failed: No such file or directory Mar 9 09:36:08 dervish dovecot: imap(solarz): Error: quotactl(Q_GETQUOTA, oceanic:/home7) failed: No such file or directory Mar 9 09:36:14 dervish dovecot: imap(solarz): Error: quotactl(Q_GETQUOTA, oceanic:/home7) failed: No such file or directory Mar 9 09:36:14 dervish dovecot: imap(solarz): Error: quotactl(Q_GETQUOTA, oceanic:/home7) failed: No such file or directory [root@dervish dovecot]# quota solarz Ograniczenia dyskowe user solarz (uid 1761): System plików bloki miękki twardy pobł. pliki miękki twardy pobł. /dev/mapper/vg01-lvol00 256572 7120150 8000150 1373 140010 510010 ftp:/home/ftp/pub 163490624 180000000 280000000 221472 0 0 oceanic:/home1 162643 13756030 14888830 697 190000 650000 oceanic:/home7 12298720 13756030 14888830 144846 190000 650000 oceanic:/homed 3022789 13756030 14888830 15122 190000 650000 What I doing wrong? Best Regards PS-Inbox is mounted locally rest of the mailboxes are via nfs -- Bartłomiej Solarz-Niesłuchowski, Administrator WSISiZ e-mail: Bartlomiej.Solarz-Niesluchowski(a)wit.edu.pl tel. 223486547, fax 223486501 JID: solarz(a)jabber.wit.edu.pl 01-447 Warszawa, ul. Newelska 6, pokój 404, pon.-pt. 8-16 Motto - Jak sobie pościelisz tak sie wyśpisz

2 7

[Dovecot] newbie: can not authenticate using dovecot
by nyoman.bogi＠gmail.com 18 May '11

18 May '11

Hi all, This is the first time I used Dovecot and it's perfectly run : dev# ps ax | grep dove 77332 ?? Ss 0:00.30 /usr/local/sbin/dovecot -c /usr/local/etc/dovecot.con 77333 ?? S 0:00.10 dovecot-auth 77334 ?? I 0:00.02 dovecot-auth -w 81495 0 S+ 0:00.00 grep dove But when I try to connect to Dovecot's POP3 Server : dev# telnet 127.0.0.1 110 Trying 127.0.0.1... Connected to localhost. Escape character is '^]'. +OK Dovecot ready. user bogi +OK pass bogi Connection closed by foreign host. Is there something I missed in Dovecot's configuration? This is my configuration : dev# dovecot --version 1.2.16 dev# dovecot -n # 1.2.16: /usr/local/etc/dovecot.conf # OS: FreeBSD 8.2-RELEASE i386 protocols: pop3 listen: 127.0.0.1:110 ssl: no disable_plaintext_auth: no login_dir: /var/run/dovecot/login login_executable: /usr/local/libexec/dovecot/pop3-login verbose_proctitle: yes first_valid_uid: 1000 first_valid_gid: 1000 mail_privileged_group: mail mail_location: mbox:~/mail/:INBOX=/var/mail/%u mail_executable: /usr/local/libexec/dovecot/pop3 mail_plugin_dir: /usr/local/lib/dovecot/pop3 pop3_client_workarounds: outlook-no-nuls oe-ns-eoh lda: sendmail_path: /usr/sbin/sendmail auth default: mechanisms: plain login username_format: %Lu passdb: driver: pam args: session=yes dovecot userdb: driver: passwd args: blocking=yes socket: type: listen client: path: /var/run/dovecot/auth-client mode: 432 master: path: /var/run/dovecot/auth-master mode: 384

2 4

[Dovecot] vacation problem with sieve and sogo
by Pablo Luchetti 18 May '11

18 May '11

Hi, I have a problem with dovecot's sieve and SOGo ( http://www.sogo.nu/ ) I have installed last version of sogo ( 1.3.6) in one virtual machine with ubuntu, lucid. In another virtualmachine with ubuntu jaunty is running dovecot ( 1:1.1.11-0ubuntu4.1 ) When try to activate vacation function, after the "PUTSCRIPT "sogo" command, the manage-sieve answer: NO "Script name 'sogo' is reserved for internal use." And fails. But I found, telneting the mail server on port 2000 that if I change script name, all works fine: SETACTIVE "" OK "No scripts currently active." PUTSCRIPT "prueba" {536+} require ["vacation"]; if allof ( not exists ["list-help", "list-unsubscribe", "list-subscribe", "list-owner", "list-post", "list-archive", "list-id", "Mailing-List"], not header :comparator "i;ascii-casemap" :is "Precedence" ["list", "bulk", "junk"], not header :comparator "i;ascii-casemap" :matches "To" "Multiple recipients of*" ) {vacation :days 1 :addresses ["pluchetti(a)example.org", "pablo.luchetti(a)example.org"] text: hoy es 27 de abril de 2011, y estoy probando el nuevo sogo. 10:40 . ; } redirect "pllis(a)educ.ar"; keep; OK "Putscript completed." SETACTIVE "prueba" OK "Setactive completed." logout OK "Logout completed." Connection closed by foreign host. So, the question is: Why does this happen? How can I fix it ? Any ideas? Here are dovecot's version and config: # dovecot --version 1.1.11 # dovecot -n # 1.1.11: /etc/dovecot/dovecot.conf # OS: Linux 2.6.28-18-server i686 Ubuntu 9.04 log_path: /var/log/mail/dovecot-msa.log log_timestamp: %Y-%m-%d %H:%M:%S protocols: imap imaps pop3 pop3s ssl_cert_file: /etc/ssl/local/WILD.jil_01+CHAIN.crt ssl_key_file: /etc/ssl/private/WILD.jil_01.key login_dir: /var/run/dovecot/login login_executable(default): /usr/lib/dovecot/imap-login login_executable(imap): /usr/lib/dovecot/imap-login login_executable(pop3): /usr/lib/dovecot/pop3-login login_greeting: JIL mail server ready. first_valid_uid: 106 last_valid_uid: 106 first_valid_gid: 112 last_valid_gid: 112 mail_privileged_group: mail mail_uid: vmail mail_gid: vmail mail_location: maildir:~ mail_executable(default): /usr/lib/dovecot/imap mail_executable(imap): /usr/lib/dovecot/imap mail_executable(pop3): /usr/lib/dovecot/pop3 mail_plugin_dir(default): /usr/lib/dovecot/modules/imap mail_plugin_dir(imap): /usr/lib/dovecot/modules/imap mail_plugin_dir(pop3): /usr/lib/dovecot/modules/pop3 auth default: mechanisms: plain login user: vmailauth passdb: driver: ldap args: /etc/dovecot/ldap-auth-userdb.conf userdb: driver: ldap args: /etc/dovecot/ldap-auth-userdb.conf socket: type: listen client: path: /var/spool/postfix/private/auth-client mode: 432 user: postfix group: postfix master: path: /var/run/dovecot/auth-master mode: 384 user: vmail group: vmail plugin: sieve: ~/sieve/s0g0.sieve Thanks!! Pablo.

3 6

[Dovecot] IMAP message ID bad for very old message
by a.smith＠ukgrid.net 17 May '11

17 May '11

Hi, I just noticed that the ordering by message ID when accessing my email via IMAP is messed up. I'm looking in the INBOX that contains 11757 emails. For some reason a load of emails from 2009 and 2010 are being listed near the top, for example I have a message with ID 11441 from 2009 where it definitely shouldn't be, its all mixed in with emails from 2011 there. Info from LDAP is: * 11441 FETCH (FLAGS (\Answered \Seen) INTERNALDATE "27-Mar-2009 09:14:10 +0000" RFC822.SIZE 5772 ENVELOPE ("Fri, 27 Mar 2009 09:15:09 -0000" "MyC IP on CBL" (("Patrick XXXXXXXX- XXXXXXXX" NIL "patrick" "XXXXXXXX.co.uk")) (("Patrick XXXXXX- XXXXXXXX" NIL "patrick" "XXXXXXX.co.uk")) (("Patrick xxxxxx - xxxxxxx" NIL "patrick" "XXXXXXXX.co.uk")) (("Andy Smith" NIL "a.smith" "ukgrid.net")) (("Frank XXXXXXX" NIL "frank" "XXXXXXXXXXX.co.uk")(NIL NIL "Tim.XXXXXXXX" "XXXXXX.org")) NIL NIL "<6937D025FA924E73B8C839858C27AEBF@PatrickDesktop>")) I'm using maildir format, and the actual file date looks fine too: -rw-rw---- 1 vmail vmail 5627 Mar 27 2009 1238145250.H86871P67126.mx1.ukgrid.net:2,RS I am testing IMAP via telnet (originally noticed the problem viewing mail via HORDE/IMP). My system is FreeBSD 8.2, Dovecot 2.0.11. What might cause this behaviour? thanks Andy.

3 10

[Dovecot] Permission lookup failed with imap
by Alex 17 May '11

17 May '11

Hi all, I'm still trying to troubleshoot my problem with dovecot-2.0.11 and creating "mail/mail" directories for a reason unknown to me, so I enabled mail_debug. It's now printing this: May 15 21:39:33 mail dovecot: imap(gdadmin): Debug: Namespace : Using permissions from /home/gdadmin/mail: mode=0755 gid=-1 May 15 21:39:33 mail dovecot: imap(gdadmin): Debug: Namespace : Permission lookup failed from /home/gdadmin/mail/mail/INBOX. Trash That file (INBOX.Trash) does exist at that location and is readable. It prints that line three times for each of INBOX.Sent, INBOX.Trash, and INBOX.Drafts. Also notice that it is creating /home/user/mail/mail. My mail_location is set to "mbox:~/mail:INBOX=/var/spool/mail/%u", so I'm really confused. I really hope someone has some ideas! Thanks so much, Best, Alex

2 6

[Dovecot] ID RFC2971 stored anywhere when client announced it?
by Nikolay Shopik 17 May '11

17 May '11

Does dovecot store RFC2971 information supplied by client, anywhere?

2 3

[Dovecot] dovecot-lda 2.0.8 Panic: stream doesn't support seeking backwards
by Jacky Chan 16 May '11

16 May '11

Running 2.0.8 as IMAP server and LDA with quota support. The environment is: os: 64bit Slackware 13.1.0 fs: ext3 smtp: postfix-2.7.2 imap: dovecot-2.0.8 The dovecot setting in postfix master.cf dovecot unix - n n - - pipe user=mailuser:mailuser argv=/usr/dovecot/libexec/dovecot/dovecot-lda -d ${recipient} Everything work fine and mail can be saved to user's home directory without error when the user is not over quota. If over quota occur, the maillog log this error message: Command died with signal 6: "/usr/dovecot/libexec/dovecot/dovecot-lda". Command output: lda: Debug: Loading modules from directory: /usr/dovecot/lib64/dovecot lda: Debug: Module loaded: /usr/dovecot/lib64/dovecot/lib10_quota_plugin.so lda: Debug: auth input: xxx(a)xxx.com home=/home/mail_data/xxx.com/xxx quota_rule=*:storage=1024 uid=9203 gid=9203 lda: Debug: Added userdb setting: plugin/quota_rule=*:storage=1024 lda(xxx(a)xxx.com): Debug: Effective uid=9203, gid=9203, home=/home/mail_data/xxx.com/xxx lda(xxx(a)xxx.com): Debug: Quota root: name= backend=maildir args= lda(xxx(a)xxx.com): Debug: Quota rule: root= mailbox=* bytes=1048576 messages=0 lda(xxx(a)xxx.com): Debug: Quota rule: root= mailbox=Trash bytes=+104857600 messages=0 lda(xxx(a)xxx.com): Debug: maildir++: root=/home/mail_data/xxx.com/xxx, index=, control=, inbox=/home/mail_data/xxx.com/xxx lda(xxx(a)xxx.com): Debug: Quota root: name= backend=maildir args= lda(xxx(a)xxx.com): Debug: none: root=, index=, control=, inbox= lda(xxx(a)xxx.com): Panic: stream doesn't support seeking backwards lda(xxx(a)xxx.com): Error: Raw backtrace: /usr/dovecot-2.0.8/lib64/dovecot/libdovecot.so.0(+0x3ca6a) [0x7ffc860a1a6a] -> /usr/dovecot-2.0.8/lib64/dovecot/libdovecot.so.0(default_fatal_handler+0x32) [0x7ffc860a1b52] -> /usr/dovecot-2.0.8/lib64/dovecot/libdovecot.so.0(i_fatal+0) [0x7ffc8607c031] -> /usr/dovecot-2.0.8/lib64/dovecot/libdovecot.so.0(+0x45834) [0x7ffc860aa834] -> /usr/dovecot-2.0.8/lib64/dovecot/libdovecot.so.0(i_stream_seek+0x86) [0x7ffc860a81f6] -> /usr/dovecot-2.0.8/lib64/dovecot/libdovecot.so.0(+0x45d87) [0x7ffc860aad87] -> /usr/dovecot-2.0.8/lib64/dovecot/libdovecot.so.0(i_stream_read+0x64) [0x7ffc860a8284] -> /usr/dovecot-2.0.8/lib64/dovecot/libdovecot.so.0(i_stream_read_data+0x3d) [0x7ffc860a894d] -> /usr/dovecot-2.0.8/lib64/dovecot/libdovecot.so.0(message_parse_header_next+0x73) [0x7ffc8608e973] -> /usr/dovecot-2.0.8/lib64/dovecot/libdovecot.so.0(+0x2b1a7) [0x7ffc860901a7] -> /usr/dovecot-2.0.8/lib64/dovecot/libdovecot.so.0(message_parser_parse_next_block+0x29) [0x7ffc860908f9] -> /usr/dovecot-2.0.8/lib64/dovecot/libdovecot.so.0(message_parser_parse_header+0x41) [0x7ffc86090a91] -> /usr/dovecot-2.0.8/lib64/dovecot/libdovecot-storage.so.0(index_mail_parse_headers+0xc2) [0x7ffc86535fd2] -> /usr/dovecot-2.0.8/lib64/dovecot/libdovecot-storage.so.0(+0x462ea) [0x7ffc865362ea] -> /usr/dovecot-2.0.8/lib64/dovecot/libdovecot-storage.so.0(index_mail_get_first_header+0x5e) [0x7ffc8653689e] -> /usr/dovecot-2.0.8/lib64/dovecot/libdovecot-lda.so.0(mail_deliver_get_log_var_expand_table+0x48) [0x7ffc862eb848] -> /usr/dovecot-2.0.8/lib64/dovecot/libdovecot-lda.so.0(+0x593a) [0x7ffc862eb93a] -> /usr/dovecot-2.0.8/lib64/dovecot/libdovecot-lda.so.0(mail_deliver_log+0x118) [0x7ffc862ebb28] -> /usr/dovecot-2.0.8/lib64/dovecot/libdovecot-lda.so.0(mail_deliver_save+0x2e2) [0x7ffc862ec012] -> /usr/dovecot-2.0.8/lib64/dovecot/libdovecot-lda.so.0(mail_deliver+0xe3) [0x7ffc862ec2c3] -> /usr/dovecot/libexec/dovecot/dovecot-lda(main+0x67c) [0x402dec] -> /lib64/libc.so.6(__libc_start_main+0xfd) [0x7ffc858f4c7d] -> /usr/dovecot/libexec/dovecot/dovecot-lda() [0x402549] I tried run the dovecot-lda at command line: /usr/dovecot/libexec/dovecot/dovecot-lda -d xxx(a)xxx.com < some_saved_mail The result is dovecot quota plugin reject the mail and send an over quota message back to the sender without any error. It seems that the error is only occur with postfix pipe command. Any hints?

4 5

[Dovecot] when the user has no home directory
by Dave Yost 16 May '11

16 May '11

A user on our server for some reason didn't have a home directory. As a result, the pop3 server was complaining. Apple's Mail app reported that the server said: The attempt to send data to the server "(null)" failed. It would be nice if the server would say something to the effect that the connection failed because the user account has no home directory. Thanks

3 5

[Dovecot] user_query and mail_plugins in database
by Ralf Zimmermann 16 May '11

16 May '11

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi all, I have a problem with mail_plugins in dovecot-2.0.x. I will use mail_plugins within a database, so that I can define plugins for users in the database. But I get errors like this. - -----------------------------%<------------------------------------ lmtp(3933): Error: Can't load plugin imap_quota_plugin: Plugin is intended to be used only by imap binary (we're lmtp) - -----------------------------%<------------------------------------- Here my options from the configuration: - -----------------------------%<------------------------------------- mail_plugins = " acl quota" protocol lmtp { mail_plugins = " acl quota sieve" } protocol lda { mail_plugins = " acl quota sieve" } protocol imap { mail_plugins = " acl quota imap_quota imap_acl autocreate" } - -----------------------------%<-------------------------------------- Every protocol uses own mail_plugin definitions. So I create the following user_query: user_query = SELECT LOWER(login) AS user,home,mail,5000 AS uid,5000 AS gid,CONCAT('*:storage=',quota_mb,'MB') AS quota_rule,acl_groups,case when '%s'='lda' then 'acl quota sieve' when '%s'='lmtp' then 'acl quota sieve' when '%s'='doveadm' then 'acl quota' when '%s'='sieve' then 'acl quota' else mail_plugins end as mail_plugins FROM virtual_users WHERE ( login='%u' OR email='%u' ) AND enabled IS true; Now the configuration works. Can I use a simpler solution to configure this functionality? Ralf -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.10 (GNU/Linux) iQEcBAEBAgAGBQJN0StGAAoJENVjhbwuX+/HyPQH/2hTa5k32Y1WIhVLpRtPudLr qPnk29rN4Gz+6GGwK9M6X3Shkgx1mdGEwZwzEkV/QAURgk+8k90uN+Od1gqKtLer dMhUJPJjeZbRmcxthA/fNKuAHiGCQsYSiCle0603iFq8HwG5QfWvf+IqkUuo/MzI 9bX9xBJGW40M/wAisiRLj03Y+PWe101YL3iKXbDYVuzFpMeJ3WkUoJ378ujGWyaH zjEf5sYACf9jVx6wAsthwaXheRwyxXhcQOrBldOun+rh+l809iD5ivogBrbd3o/G Uuli0LlS8b5tOXZfxIqFmVCt/1Ebo1oD/vHc9yZo1eLSqpuPZGc3qiDPP/JCMY4= =YhpJ -----END PGP SIGNATURE-----

2 1

Re: [Dovecot] dovecot proxy with nopassword and postfix sasl
by Franco Rizzo 16 May '11

16 May '11

Hello thank you for your answer when I have this user in my passdb file franco@ozzir.ch:{plain}password::::::proxy host=xx.xx.xx.xx postfix sasl accept only the password => password When I have this user in my passdb file franco@ozzir.ch:::::::nopassword proxy host=xx.xx.xx.xx postfix sasl accept any password as I said imap and pop3 refuse always a bad password this is my postfix config smtpd_sasl_type = dovecot smtpd_sasl_path = private/auth # and the common settings to enable SASL: smtpd_sasl_auth_enable = yes smtpd_sasl_security_options = noanonymous smtpd_recipient_restrictions = permit_mynetworks, reject_sender_login_mismatch, permit_sasl_authenticated, reject_unauth_destination smtpd_sender_login_maps = mysql:/etc/postfix/mysql-smtpd_sender_login_maps.cf #for outlook 2003 and outlook express > v6 broken_sasl_auth_clients = yes Franco Rizzo

3 2

[Dovecot] dovecot authentication failing
by David Mehler 16 May '11

16 May '11

Hello, I'm running dovecot 2.0.x on a centos 5.6 machine. This is a new installation, I haven't even opened the firewall to it yet. I was trying to telnet localhost 143 and 110 trying to authenticate a user. I'm getting authentication failure in my maillog but no details. Here's the one line I get in my maillog: May 14 15:33:42 ohio dovecot: pop3-login: Aborted login (auth failed, 1 attempts): user=<user(a)example.com>, method=PLAIN, rip=127.0.0.1, lip=127.0.0.1, secured Here's a doveconf -n: # 2.0.12: /etc/dovecot/dovecot.conf # OS: Linux 2.6.38.3-linode32 i686 CentOS release 5.6 (Final) ext3 auth_default_realm = domain.com auth_mechanisms = plain login base_dir = /var/run/dovecot/ disable_plaintext_auth = no listen = * mail_location = maildir:/var/spool/mail/vhosts/%d/%u maildir_very_dirty_syncs = yes mbox_write_locks = fcntl passdb { args = scheme=CRYPT username_format=%u /etc/dovecot/users driver = passwd-file } protocols = imap pop3 service auth { unix_listener /var/spool/postfix/private/auth { group = postfix user = postfix } } ssl_cert = </etc/pki/dovecot/certs/dovecot.pem ssl_key = </etc/pki/dovecot/private/dovecot.pem Here's how I constructed my users file: # # Passwd-file for use with dovecot authentication # Used in a virtual setup # Username:{scheme}HashedPassword:UID:GID:: user:{SSHA512}hbLu+pCmhmtyKEwyAs3wv3kvHD/ryr0MoXOAq3VdB7X/g8qIE/xE9BG+eI4jhFk9pTyiCltPCjZxv5/+yK1wll2LNcw= :5000:5000:: My goal is to use this with a postfix virtual mailbox setup, the postfix part is already in place. The mailbox base is /var/spool/mail/vhosts and under that there's example.com which is the domain and under that the various users one just called user for this example. The Uid and Gid 5000 is the same one the postfix vmail user is running as that's the user who handles the virtual mailbox domains. I'm suspecting my issue is in my users file or the definition of it in passwd-file{ i've been over the wiki for 2.0.x dovecot, this was definitely worth the upgrade by the way, and thus far have not found an answer. I'd appreciate any help. Thanks. Dave.

4 4

[Dovecot] v1.2.17 released
by Timo Sirainen 16 May '11

16 May '11

http://dovecot.org/releases/1.2/dovecot-1.2.17.tar.gz http://dovecot.org/releases/1.2/dovecot-1.2.17.tar.gz.sig The important changes since v1.2.16: - Fixed potential crashes and other problems when parsing header names that contained NUL characters. - IMAP: Fixed a memory leak with ESEARCH command handling - Quota warnings could have been executed at incorrect times with some configs.

3 2

[Dovecot] Dovecot mail_location creating duplicate mbox mail directories
by Alex 16 May '11

16 May '11

Hi all, I'm using dovecot v2.0.11 on fedora14 with postfix. This system was migrated from an old UW mbox system, so users already have ~/mail/INBOX.* files. Now for some reason, dovecot is creating ~/mail/mail/INBOX.* files and somehow not seeing the mail_location properly. I've set mail_location to "mail_location = mbox:~/mail:INBOX=/var/spool/mail/%u", which has worked on a similar system I migrated, but I can't understand why it would try and create a "mail" subdiretory under the ~/mail directory. Even if I set mail_location to just mbox:~ instead, it doesn't create the .subscriptions file properly, and still creates them with "mail/INBOX.Trash" for example. Below is my doveconf. Any ideas greatly appreciated. Is there a way to have doveconf only print those values that differ from the defaults? # 2.0.11: /etc/dovecot/dovecot.conf # OS: Linux 2.6.35.13-91.fc14.x86_64 x86_64 Fedora release 14 (Laughlin) auth_anonymous_username = anonymous auth_cache_negative_ttl = 1 hours auth_cache_size = 0 auth_cache_ttl = 1 hours auth_debug = no auth_debug_passwords = no auth_default_realm = auth_failure_delay = 2 secs auth_first_valid_uid = 500 auth_gssapi_hostname = auth_krb5_keytab = auth_last_valid_uid = 0 auth_master_user_separator = auth_mechanisms = plain login auth_realms = auth_socket_path = auth-userdb auth_ssl_require_client_cert = no auth_ssl_username_from_cert = no auth_use_winbind = no auth_username_chars = abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ01234567890.-_@ auth_username_format = auth_username_translation = auth_verbose = no auth_verbose_passwords = no auth_winbind_helper_path = /usr/bin/ntlm_auth auth_worker_max_count = 30 base_dir = /var/run/dovecot config_cache_size = 1 M debug_log_path = default_client_limit = 2000 default_idle_kill = 60 default_internal_user = dovecot default_login_user = dovenull default_process_limit = 100 default_vsz_limit = 256 M deliver_log_format = msgid=%m: %$ dict_db_config = director_doveadm_port = 0 director_mail_servers = director_servers = director_user_expire = 15 mins disable_plaintext_auth = yes dotlock_use_excl = yes doveadm_socket_path = doveadm-server doveadm_worker_count = 0 first_valid_gid = 1 first_valid_uid = 500 hostname = imap_capability = imap_client_workarounds = imap_id_log = imap_id_send = imap_idle_notify_interval = 2 mins imap_logout_format = bytes=%i/%o imap_max_line_length = 64 k import_environment = TZ info_log_path = last_valid_gid = 0 last_valid_uid = 0 lda_mailbox_autocreate = no lda_mailbox_autosubscribe = no lda_original_recipient_header = libexec_dir = /usr/libexec/dovecot listen = *, :: lmtp_proxy = no lmtp_save_to_detail_mailbox = no lock_method = fcntl log_path = syslog log_timestamp = "%b %d %H:%M:%S " login_access_sockets = login_greeting = Dovecot ready. login_log_format = %$: %s login_log_format_elements = user=<%u> method=%m rip=%r lip=%l mpid=%e %c login_trusted_networks = mail_access_groups = mail_attachment_dir = mail_attachment_fs = sis posix mail_attachment_hash = %{sha1} mail_attachment_min_size = 128 k mail_cache_fields = flags mail_cache_min_mail_count = 0 mail_chroot = mail_debug = yes mail_fsync = optimized mail_full_filesystem_access = no mail_gid = mail mail_home = mail_location = mbox:~/mail:INBOX=/var/spool/mail/%u mail_log_prefix = "%s(%u): " mail_max_keyword_length = 50 mail_max_lock_timeout = 0 mail_max_userip_connections = 10 mail_never_cache_fields = imap.envelope mail_nfs_index = no mail_nfs_storage = no mail_plugin_dir = /usr/lib64/dovecot mail_plugins = mail_privileged_group = mail mail_save_crlf = no mail_temp_dir = /tmp mail_uid = mailbox_idle_check_interval = 30 secs mailbox_list_index_disable = no maildir_copy_with_hardlinks = yes maildir_stat_dirs = no maildir_very_dirty_syncs = no master_user_separator = mbox_dirty_syncs = yes mbox_dotlock_change_timeout = 2 mins mbox_lazy_writes = yes mbox_lock_timeout = 5 mins mbox_min_index_size = 0 mbox_read_locks = fcntl mbox_very_dirty_syncs = no mbox_write_locks = fcntl mdbox_preallocate_space = no mdbox_rotate_interval = 0 mdbox_rotate_size = 2 M mmap_disable = no passdb { args = deny = no driver = pam master = no pass = no } passdb { args = deny = no driver = pam master = no pass = no } pop3_client_workarounds = pop3_enable_last = no pop3_fast_size_lookups = no pop3_lock_session = no pop3_logout_format = top=%t/%p, retr=%r/%b, del=%d/%m, size=%s pop3_no_flag_updates = no pop3_reuse_xuidl = no pop3_save_uidl = no pop3_uidl_format = %08Xu%08Xv postmaster_address = protocols = imap pop3 lmtp quota_full_tempfail = no recipient_delimiter = + rejection_reason = Your message to <%t> was automatically rejected:%n%r rejection_subject = Rejected: %s sendmail_path = /usr/sbin/sendmail service anvil { chroot = empty client_limit = 0 drop_priv_before_exec = no executable = anvil extra_groups = group = idle_kill = 4294967295 secs privileged_group = process_limit = 1 process_min_avail = 1 protocol = service_count = 0 type = anvil unix_listener anvil-auth-penalty { group = mode = 0600 user = } unix_listener anvil { group = mode = 0600 user = } user = $default_internal_user vsz_limit = 18446744073709551615 B } service auth-worker { chroot = client_limit = 1 drop_priv_before_exec = no executable = auth -w extra_groups = group = idle_kill = 0 privileged_group = process_limit = 0 process_min_avail = 0 protocol = service_count = 1 type = unix_listener auth-worker { group = mode = 0600 user = $default_internal_user } user = vsz_limit = 18446744073709551615 B } service auth { chroot = client_limit = 4096 drop_priv_before_exec = no executable = auth extra_groups = group = idle_kill = 0 privileged_group = process_limit = 1 process_min_avail = 0 protocol = service_count = 0 type = unix_listener /var/spool/postfix/private/auth { group = postfix mode = 0660 user = postfix } unix_listener auth-client { group = mode = 0600 user = } unix_listener auth-login { group = mode = 0600 user = $default_internal_user } unix_listener auth-master { group = mode = 0600 user = } unix_listener auth-userdb { group = mode = 0600 user = } unix_listener login/login { group = mode = 0666 user = } user = $default_internal_user vsz_limit = 18446744073709551615 B } service config { chroot = client_limit = 0 drop_priv_before_exec = no executable = config extra_groups = group = idle_kill = 0 privileged_group = process_limit = 0 process_min_avail = 0 protocol = service_count = 0 type = config unix_listener config { group = mode = 0600 user = } user = vsz_limit = 18446744073709551615 B } service dict { chroot = client_limit = 1 drop_priv_before_exec = no executable = dict extra_groups = group = idle_kill = 0 privileged_group = process_limit = 0 process_min_avail = 0 protocol = service_count = 0 type = unix_listener dict { group = mode = 0600 user = } user = $default_internal_user vsz_limit = 18446744073709551615 B } service director { chroot = client_limit = 0 drop_priv_before_exec = no executable = director extra_groups = fifo_listener login/proxy-notify { group = mode = 00 user = } group = idle_kill = 4294967295 secs inet_listener { address = port = 0 ssl = no } privileged_group = process_limit = 1 process_min_avail = 0 protocol = service_count = 0 type = unix_listener director-admin { group = mode = 0600 user = } unix_listener director-userdb { group = mode = 0600 user = } unix_listener login/director { group = mode = 00 user = } user = $default_internal_user vsz_limit = 18446744073709551615 B } service dns_client { chroot = client_limit = 1 drop_priv_before_exec = no executable = dns-client extra_groups = group = idle_kill = 0 privileged_group = process_limit = 0 process_min_avail = 0 protocol = service_count = 0 type = unix_listener dns-client { group = mode = 0666 user = } unix_listener login/dns-client { group = mode = 0666 user = } user = $default_internal_user vsz_limit = 18446744073709551615 B } service doveadm { chroot = client_limit = 1 drop_priv_before_exec = no executable = doveadm-server extra_groups = group = idle_kill = 0 privileged_group = process_limit = 0 process_min_avail = 0 protocol = service_count = 1 type = unix_listener doveadm-server { group = mode = 0600 user = } user = vsz_limit = 18446744073709551615 B } service imap-login { chroot = login client_limit = 0 drop_priv_before_exec = no executable = imap-login extra_groups = group = idle_kill = 0 inet_listener imap { address = port = 143 ssl = no } inet_listener imaps { address = port = 993 ssl = yes } privileged_group = process_limit = 0 process_min_avail = 20 protocol = imap service_count = 0 type = login user = $default_login_user vsz_limit = 64 M } service imap { chroot = client_limit = 1 drop_priv_before_exec = no executable = imap extra_groups = group = idle_kill = 0 privileged_group = process_limit = 1024 process_min_avail = 0 protocol = imap service_count = 1 type = unix_listener login/imap { group = mode = 0666 user = } user = vsz_limit = 18446744073709551615 B } service lmtp { chroot = client_limit = 0 drop_priv_before_exec = no executable = lmtp extra_groups = group = idle_kill = 0 privileged_group = process_limit = 0 process_min_avail = 0 protocol = lmtp service_count = 0 type = unix_listener lmtp { group = mode = 0666 user = } user = vsz_limit = 0 } service log { chroot = client_limit = 0 drop_priv_before_exec = no executable = log extra_groups = group = idle_kill = 0 privileged_group = process_limit = 1 process_min_avail = 0 protocol = service_count = 0 type = log user = vsz_limit = 18446744073709551615 B } service pop3-login { chroot = login client_limit = 0 drop_priv_before_exec = no executable = pop3-login extra_groups = group = idle_kill = 0 inet_listener pop3 { address = port = 110 ssl = no } inet_listener pop3s { address = port = 995 ssl = yes } privileged_group = process_limit = 0 process_min_avail = 0 protocol = pop3 service_count = 1 type = login user = $default_login_user vsz_limit = 64 M } service pop3 { chroot = client_limit = 1 drop_priv_before_exec = no executable = pop3 extra_groups = group = idle_kill = 0 privileged_group = process_limit = 1024 process_min_avail = 0 protocol = pop3 service_count = 1 type = unix_listener login/pop3 { group = mode = 0666 user = } user = vsz_limit = 18446744073709551615 B } service ssl-params { chroot = client_limit = 0 drop_priv_before_exec = no executable = ssl-params extra_groups = group = idle_kill = 0 privileged_group = process_limit = 0 process_min_avail = 0 protocol = service_count = 0 type = startup unix_listener login/ssl-params { group = mode = 0666 user = } user = vsz_limit = 18446744073709551615 B } shutdown_clients = yes ssl = yes ssl_ca = ssl_cert = </etc/pki/dovecot/certs/dovecot.pem ssl_cert_username_field = commonName ssl_cipher_list = ALL:!LOW:!SSLv2:!EXP:!aNULL ssl_key = </etc/pki/dovecot/private/dovecot.pem ssl_key_password = ssl_parameters_file = ssl-parameters.dat ssl_parameters_regenerate = 168 ssl_verify_client_cert = no submission_host = syslog_facility = mail userdb { args = driver = passwd } userdb { args = driver = passwd } valid_chroot_dirs = verbose_auth = no verbose_proctitle = no verbose_ssl = no version_ignore = no protocol imap { mail_max_userip_connections = 100 }

1 0

[Dovecot] Expunge deleted messages older than X days for all users ?
by Bar Ziony 15 May '11

15 May '11

Hi, I'm currently migrating to Dovecot-based IMAP server for a ~200 users environment. Clients are Outlook 2003/2007, Thunderbird 3.x and various mobile clients. 1) What I want to accomplish is to allow the users to delete a message (then the message is moved to "Trash"), then when they empty/delete that message from Trash, it will be kept somewhere on the server for X days, and the user could recover that message in some way. Is that at all possible with Dovecot? 2) Also, how can I automatically expunge the emails that the user deleted from their deleted items folder ? What if users don't EXPUNGE by themselves ? What do you do in that case? Thanks, Bar.

3 3

[Dovecot] Dovecot Solutions company
by Timo Sirainen 14 May '11

14 May '11

I recently created Dovecot Solutions Oy (Ltd) company with two other guys. We sell Dovecot support, development, etc. I was planning on announcing this only after we get an actual web site, but since I already told about it in Linuxtag today, I might as well tell everyone. The upcoming web site should have some more details, but if you already know you want to buy something, let me know. :)

6 6

[Dovecot] Upgraded 2.012 to 2.0.13 postlogin error
by Edward Carraro 13 May '11

13 May '11

I've just upgraded to Dovecot 2.0.13 from 2.0.12 When I authenticate via telnet it closes the connection and the logs show: May 13 16:59:16 master: Info: Dovecot v2.0.13 starting up (core dumps disabled) May 13 16:59:40 auth: Debug: Loading modules from directory: /usr/local/lib/dovecot/auth May 13 16:59:40 auth: Debug: passwd-file /usr/local/etc/dovecot/master-users: Read 1 users May 13 16:59:40 auth: Debug: auth client connected (pid=22124) May 13 16:59:46 auth: Debug: client in: AUTH 1 PLAIN service=imap secured lip=127.0.0.1 rip=127.0.0.1 lport=143 rport=37146 resp=<hidden> May 13 16:59:46 auth: Debug: ldap(edward(a)dev.domain.com,127.0.0.1): pass search: base=dc=domain,dc=com scope=subtree filter=(&(|(uid= edward@dev.domain.com)(mailAlternateAddress=edward@dev.domain.com))(nimPimUserStatus=active)) fields=uid,userPassword May 13 16:59:46 auth: Debug: ldap(edward(a)dev.domain.com,127.0.0.1): result: userPassword(password)=<hidden> uid(user)=edward(a)dev.domain.com May 13 16:59:46 auth: Debug: client out: OK 1 user= edward(a)dev.domain.com May 13 16:59:46 auth: Debug: master in: REQUEST 885784577 22124 1 48936eabc3d31fe740c83dd3339261b7 May 13 16:59:46 auth: Debug: ldap(edward(a)dev.domain.com,127.0.0.1): user search: base=dc=nitido,dc=com scope=subtree filter=(&(|(uid= edward@dev.domain.com)(mailAlternateAddress=edward@dev.domain.com))(nimPimUserStatus=active)) fields=homeDirectory,quotaMailSoft May 13 16:59:46 auth: Debug: ldap(edward(a)dev.domain.com,127.0.0.1): result: homeDirectory(home)=/home/dev.domain.com/edward@dev.domain.comquotaMailSoft… May 13 16:59:46 auth: Debug: master out: USER 885784577 edward(a)dev.domain.com home=/home/dev.domain.com/edward@dev.domain.comquota_rule=*:storage=2M May 13 16:59:46 imap-postlogin: Error: script-login: Error: user edward(a)dev.domain.com: Error reading configuration: net_connect_unix(/usr/local/var/run/dovecot/config) failed: Permission denied May 13 16:59:46 imap-postlogin: Error: script-login: Fatal: Internal error occurred. Refer to server log for more information. May 13 16:59:46 log: Error: service(imap-postlogin): child 22134 returned error 89 (Fatal failure) May 13 16:59:46 imap-login: Info: Login: user=<edward(a)dev.domain.com>, method=PLAIN, rip=127.0.0.1, lip=127.0.0.1, mpid=22133, secured May 13 16:59:46 imap(edward(a)dev.domain.com): Info: Post-login script denied access to user edward(a)dev.domain.com The permission on /usr/local/var/run/dovecot/config: srw------- 1 root staff 0 May 13 16:59 config Anyone know the correct permissions? This worked fine in previous versions Thanks!

2 2

Re: [Dovecot] Dovecot Solutions company
by Voytek Eymont 13 May '11

13 May '11

On Fri, May 13, 2011 11:27 pm, Joseba Torre wrote: > On Viernes 13 Mayo 2011 14:09:10 Timo Sirainen escribió: > >> I recently created Dovecot Solutions Oy (Ltd) company with two other >> guys. We sell Dovecot support, development, etc. >> >> >> I was planning on announcing this only after we get an actual web site, >> but since I already told about it in Linuxtag today, I might as well >> tell everyone. The upcoming web site should have some more details, but >> if you already know you want to buy something, let me know. :) > > Congratulations. Hope you earn tons of money :) ditto All the best in your venture! (ooops, meant to send to the list) -- Voytek -- Voytek

1 0

[Dovecot] Fwd: Re: Dovecot Solutions company
by Joseba Torre 13 May '11

13 May '11

I supposse this was directed to the list -- Joseba Torre. Vicegerencia de TICs, área de Explotación

1 0

[Dovecot] dovecot proxy with nopassword and postfix sasl
by Franco Rizzo 13 May '11

13 May '11

HI All I have setup a dovecot proxy with remote auth, value nopassword in the passdb to make the auth remotely. With pop3 and imap the authentication is made on the remote server and this work perfectly. I have tested with wrong and correct password. Then I have added the postfix sasl and this also works fine, the request is made to dovecot. My problem is that with this method I can give any password to postfix and mail is sent. In the debug it seams that a request is made to the remote server for auth. The smtp sasl auth is only refused when I put no password. Is it allowed to use postfix sasl auth with dovecot proxy auth on remote server ? Thank you Franco Rizzo

2 1

[Dovecot] Dovecot 2.0 vs Dovecot 1.2
by Osvaldo Alvarez Pozo 11 May '11

11 May '11

Hi all I have beyng testing Dovecot 2.0.12. But I have a question. Wath are de advantages of Dovecot 2.0 appart Lmtp? Will dovecot 1.2 desapear? Thanks

2 1

[Dovecot] Different pass_dbs and auth_mechanisms on different ports
by Oliver Eales 11 May '11

11 May '11

Hello, is it possible to have dovecot imap listening on two different ports, while providing different auth_mechamisms and different pass_db/user_dbs ? Or is it better to simply have two running dovecot instances on the same machine ? Regards, Oliver

2 1

[Dovecot] Running 1.x and 2. x on same machine
by email builder 11 May '11

11 May '11

Hello, When building from source, is it possible to use "make install" to switch between version 1.x and 2.x on the same machine (just for testing)? Do both versions install the same binaries? Is configuration from 2.x backward compatible with 1.x? (so we can have the newest configuration files on our system without bothering to have a second set of 1.x config files) Or instead should we be changing something like the installation and config directorie for one of the versions when we install it (how?). Thanks for advice!!!!

2 3

[Dovecot] Sieve & auto_create mail_home
by Maria Arrea 11 May '11

11 May '11

Hello In my setup I have the following in dovecot.conf (dovecot 2.0.12) mail_home = /buzones/mydomain/%2.26Hn/%2.200Hn/%n/home_usuario/ mail_location = mdbox:/buzones/my_domain/%2.26Hn/%2.200Hn/%n:INDEX=/indices_dovecot/indices/%2.26Hn/%2.200Hn/%n My problem is with the autocreation of mail_home. We are using roundcube+sieve plugin and the first time a user tries to use sieve fails with this: May 9 12:13:52 buzon dovecot: managesieve(a_poor_user@mydomain): Error: sieve-storage: open(/buzones/my_domain/0a/94/javierdemiguel/home_usuario/sieve//tmp/roundcube-1304936032.M335644P23819.mydomain.sieve) failed: No such file or directory In the second attempt works without problems, the folder "home_usuario" is created after failing the first. How can I fix this? Regards Maria

4 3

[Dovecot] ntp revisited (so what to do ?)
by Spyros Tsiolis 11 May '11

11 May '11

OK, So what you people say is : 1. Run "ntpdate" during startup only once 2. After that, keep time with ntpd Right ? Regards, spyros ---- "I merely function as a channel that filters music through the chaos of noise" - Vangelis

12 22

[Dovecot] Problem with sieve after upgrade to 2.0
by Tom Wright 11 May '11

11 May '11

Hi, I've just upgraded from 1.2 to 2.0.12 via debian sid packages. I think I've moved all my config over to the new directory-based structure and most things are working, but the subaddress extension in sieve doesn't seem to do anything anymore. It doesn't report an error, but any rules which use it are just ignored. Other sieve rules which don't use subaddress seem to work ok. Here's my config: # 2.0.12: /etc/dovecot/dovecot.conf # OS: Linux 2.6.38-2-amd64 x86_64 Debian wheezy/sid lda_mailbox_autocreate = yes lda_mailbox_autosubscribe = yes managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date passdb { args = scheme=cram-md5 /etc/dovecot/passwd.dovecot driver = passwd-file } plugin { recipient_delimiter = - sieve = ~/.dovecot.sieve sieve_dir = ~/.sieve } postmaster_address = postmaster(a)tomonica.net protocols = " imap sieve" recipient_delimiter = - service imap-login { inet_listener imap { port = 0 } } ssl_cert = </etc/apache2/ssl/secure.tomonica.net.certchain.pem ssl_cipher_list = HIGH ssl_key = </etc/apache2/ssl/secure.tomonica.net.keyonly.pem userdb { driver = passwd } protocol lda { mail_plugins = " sieve" } Here's the script which doesn't do anything: require ["fileinto", "envelope", "subaddress"]; if envelope :detail "to" "test" { fileinto "Admin"; } I've been sending test emails to tom - test @ tomonica . net (without the spaces, only put them here for antispam) Any wrong with my config, or any other ideas? It all worked before upgrading to 2.0 Thanks, Tom

2 2

[Dovecot] Error messages in log
by Peter Bell 11 May '11

11 May '11

Hi, I would like to eliminate some of the error messages which appear in my dovecot logfile. I already understand that the message: doveconf: Warning: SSL is disabled because global ssl=no, ignoring ssl=yes for subsection is fixed in the current development code. However, I also get a lot of: lda(peter): Error: User peter doesn't have home dir set, disabling duplicate database Is there a way to eliminate/supress these messages? I'm operating with virtual users, so checking for a home directory doesn't make a lot of sense. Is there a setting in the .conf file which can control this? Possibly more concerning is this message: May 10 23:31:23 imap(peter): Error: link(/mnt/user/Maildir/peter/dovecot.index.log, /mnt/user/Maildir/peter/dovecot.index.log.2) failed: Function not implemented I'm not sure exactly what I was doing at the time - probably experimenting with Sieve filters. Has this compromised my maildir? I have already disabled copy with hard links - is there another 'hardlink' setting available? Thank you for any advice! root@Tower:~# doveconf -n # 2.0.12: /usr/local/etc/dovecot/dovecot.conf doveconf: Warning: SSL is disabled because global ssl=no, ignoring ssl=yes for subsection doveconf: Warning: SSL is disabled because global ssl=no, ignoring ssl=yes for subsection # OS: Linux 2.6.36.2-unRAID i686 Slackware 13.1.0 fuse.shfs disable_plaintext_auth = no listen = * log_path = /var/log/mail.log mail_location = maildir:/mnt/user/Maildir/%u maildir_copy_with_hardlinks = no managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date passdb { args = /etc/passwd.dovecot driver = passwd-file } plugin { sieve = /mnt/user/Maildir/%u/.dovecot.sieve sieve_dir = /mnt/user/Maildir/%u/ sieve_global_path = /var/lib/dovecot/default.sieve } postmaster_address = postmaster(a)bellfamily.org.uk protocols = imap sieve service auth { user = root } service imap-login { inet_listener imap { port = 143 } } ssl = no userdb { args = /etc/passwd.dovecot driver = passwd-file } protocol lda { mail_plugins = sieve } root@Tower:~# -- ------------------------------------------------------------------- Peter Bell Mob: +63 (0) 9287 340 343 Tagum City, Philippines. Tel: +63 (0) 84 400 5085 email/msn: peter(a)bellfamily.org.uk Tel: +44 (0) 118 331 0000

3 5

[Dovecot] Importing emails from mounted NFS to dovecot using doveadm
by Alex Baule 11 May '11

11 May '11

Hello Timo.... I try to import emails using doveadm, but i found one little issue to me, my driver in auth is auth_default_realm = exemplo.com.br auth_mechanisms = LOGIN PLAIN passdb { driver = pam } userdb { driver = static args = uid=mail gid=mail home=/storage/gss/emexis/messages/%d/%n allow_all_users=yes } but my emails to import in NFS i cant change the UID-GID to mail:mail, because is in use by another IMAP (in one machine uid X is different from another machine) There is a way to import emails with doveadm without change the owner from my emails to import ?

2 1

[Dovecot] Backtrace:dovecot/imap with 2.0.9 hg checkout from 1st of Febrauary
by Ralf Hildebrandt 11 May '11

11 May '11

It's actually 4 crashes in the same minute: Date: Wed, 02 Feb 2011 04:28:35 +0100 GNU gdb (GDB) 7.0.1-debian Copyright (C) 2009 Free Software Foundation, Inc. License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html> This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law. Type "show copying" and "show warranty" for details. This GDB was configured as "i486-linux-gnu". For bug reporting instructions, please see: <http://www.gnu.org/software/gdb/bugs/>... Reading symbols from /usr/dovecot-2/libexec/dovecot/imap...done. Reading symbols from /usr/dovecot-2/lib/dovecot/libdovecot-storage.so.0...done. Loaded symbols for /usr/dovecot-2/lib/dovecot/libdovecot-storage.so.0 Reading symbols from /usr/dovecot-2/lib/dovecot/libdovecot.so.0...done. Loaded symbols for /usr/dovecot-2/lib/dovecot/libdovecot.so.0 Reading symbols from /lib/i686/cmov/libc.so.6...Reading symbols from /usr/lib/debug/lib/i686/cmov/libc-2.11.2.so...done. (no debugging symbols found)...done. Loaded symbols for /lib/i686/cmov/libc.so.6 Reading symbols from /lib/i686/cmov/libdl.so.2...Reading symbols from /usr/lib/debug/lib/i686/cmov/libdl-2.11.2.so...done. (no debugging symbols found)...done. Loaded symbols for /lib/i686/cmov/libdl.so.2 Reading symbols from /lib/i686/cmov/librt.so.1...Reading symbols from /usr/lib/debug/lib/i686/cmov/librt-2.11.2.so...done. (no debugging symbols found)...done. Loaded symbols for /lib/i686/cmov/librt.so.1 Reading symbols from /lib/ld-linux.so.2...Reading symbols from /usr/lib/debug/lib/ld-2.11.2.so...done. (no debugging symbols found)...done. Loaded symbols for /lib/ld-linux.so.2 Reading symbols from /lib/i686/cmov/libpthread.so.0...Reading symbols from /usr/lib/debug/lib/i686/cmov/libpthread-2.11.2.so...done. (no debugging symbols found)...done. Loaded symbols for /lib/i686/cmov/libpthread.so.0 Reading symbols from /usr/dovecot-2/lib/dovecot/lib10_quota_plugin.so...done. Loaded symbols for /usr/dovecot-2/lib/dovecot/lib10_quota_plugin.so Reading symbols from /usr/dovecot-2/lib/dovecot/lib11_imap_quota_plugin.so...done. Loaded symbols for /usr/dovecot-2/lib/dovecot/lib11_imap_quota_plugin.so Reading symbols from /usr/dovecot-2/lib/dovecot/lib11_trash_plugin.so...done. Loaded symbols for /usr/dovecot-2/lib/dovecot/lib11_trash_plugin.so Reading symbols from /usr/dovecot-2/lib/dovecot/lib15_notify_plugin.so...done. Loaded symbols for /usr/dovecot-2/lib/dovecot/lib15_notify_plugin.so Reading symbols from /usr/dovecot-2/lib/dovecot/lib20_fts_plugin.so...done. Loaded symbols for /usr/dovecot-2/lib/dovecot/lib20_fts_plugin.so Reading symbols from /usr/dovecot-2/lib/dovecot/lib20_mail_log_plugin.so...done. Loaded symbols for /usr/dovecot-2/lib/dovecot/lib20_mail_log_plugin.so Reading symbols from /usr/dovecot-2/lib/dovecot/lib20_zlib_plugin.so...done. Loaded symbols for /usr/dovecot-2/lib/dovecot/lib20_zlib_plugin.so Reading symbols from /usr/lib/libz.so.1...(no debugging symbols found)...done. Loaded symbols for /usr/lib/libz.so.1 Reading symbols from /lib/libbz2.so.1.0...(no debugging symbols found)...done. Loaded symbols for /lib/libbz2.so.1.0 Reading symbols from /usr/dovecot-2/lib/dovecot/lib21_fts_squat_plugin.so...done. Loaded symbols for /usr/dovecot-2/lib/dovecot/lib21_fts_squat_plugin.so Reading symbols from /usr/lib/gconv/ISO8859-1.so...Reading symbols from /usr/lib/debug/usr/lib/gconv/ISO8859-1.so...done. (no debugging symbols found)...done. Loaded symbols for /usr/lib/gconv/ISO8859-1.so Reading symbols from /lib/libgcc_s.so.1...(no debugging symbols found)...done. Loaded symbols for /lib/libgcc_s.so.1 Core was generated by `dovecot/imap'. Program terminated with signal 6, Aborted. #0 0xb772b430 in __kernel_vsyscall () #0 0xb772b430 in __kernel_vsyscall () No symbol table info available. #1 0xb74cd751 in *__GI_raise (sig=6) at ../nptl/sysdeps/unix/sysv/linux/raise.c:64 resultvar = <value optimized out> pid = -1218555916 selftid = 4889 #2 0xb74d0b82 in *__GI_abort () at abort.c:92 act = {__sigaction_handler = {sa_handler = 0xbfa6ff70, sa_sigaction = 0xbfa6ff70}, sa_mask = {__val = {3077746096, 3215392580, 3077788226, 3215392564, 3076492800, 3215392552, 3077868116, 0, 3076431144, 1, 0, 1, 3077745656, 37, 3215392472, 3076718496, 3076713323, 3076932840, 3215392556, 3072362840, 0, 3215392624, 3215392552, 3215392564, 3076718189, 3077745656, 0, 1733, 3215392584, 3076518647, 3215392556, 10}}, sa_flags = -1079574620, sa_restorer = 0xb76659cc <pid.3441>} sigs = {__val = {32, 0 <repeats 31 times>}} #3 0xb7630875 in default_fatal_finish (type=<value optimized out>, status=<value optimized out>) at failures.c:187 backtrace = 0xb7208148 "/usr/dovecot-2/lib/dovecot/libdovecot.so.0(+0x3b861) [0xb7630861] -> /usr/dovecot-2/lib/dovecot/libdovecot.so.0(+0x3b8cf) [0xb76308cf] -> /usr/dovecot-2/lib/dovecot/libdovecot.so.0(i_fatal+0) [0xb7607"... #4 0xb76308cf in i_internal_fatal_handler (ctx=0xbfa70014, format=0xb7426fd4 "file %s: line %d (%s): assertion failed: (%s)", args=0xbfa70034 "UqB\267l\003") at failures.c:645 status = 0 #5 0xb760769e in i_panic ( format=0xb7426fd4 "file %s: line %d (%s): assertion failed: (%s)") at failures.c:259 ctx = {type = LOG_TYPE_PANIC, exit_status = 0, timestamp = 0x0} args = 0xbfa70034 "UqB\267l\003" #6 0xb74215ca in squat_build_word (ctx=0x8facb48, uid=75, data=0xb71e83c7 "\r\211", char_lengths=0x9269dcf "\001\002\003", size=2) at squat-trie.c:876 trie = 0x8face80 i = <value optimized out> j = <value optimized out> bytelen = <value optimized out> __FUNCTION__ = "squat_build_word" #7 0xb7421e46 in squat_trie_build_more_real (ctx=0x8facb48, uid=37, type=SQUAT_INDEX_TYPE_HEADER, input=0x9209c20 "\037\357\277\275\b\b?C\357\277\275L2,S\n\020H!\357\277\275\060 \314\203\357\277\275-!\026\341\222\215\357\277\275{\357\277\275~\357\277\275I\357\277\275R\357\277\275W\337\275U\357\277\275*\357\277\275$\032\005\036WIF=\025\037\031\357\277\275\067S\006\357\277\275FM\357\277\275\352\231\200\035\357\277\275\\\357\277\275\034\357\277\275\\#\357\277\275G:\357\277\275\070\357\277\275\017#\323\215R\357\277\275H#\357\277\275@\002\357\277\275~\357\277\275\065\357\277\275\b\357\277\275K\357\277\275\023\357\277\275.VM\357\277\275Q\357\277\275\061\035G\357\277\275\033\336\243\027\357\277\275OBQ\357\277\275\t\aJ\357\277\275@\357\277\275I\357\277\275"..., size=139516) at squat-trie.c:934 trie = <value optimized out> data = 0xb71e6018 "" char_lengths = 0x9267a20 "\001\003\001\001\001\001\001\001\003\001\001\001\001\001\001\001\001\001\001\003\001\001\001\001\002\001\003\001\001\001\001\001\003\001\001\003\001\001\001\003\001\001\001\003\001\001\001\003\001\001\001\003\001\001\001\002\001\001\003\001\001\001\003", '\001' <repeats 13 times>, "\003\001\001\001\001\001\003\001\001\001\001\003\001\001\003\001\001\001\003\001\001\001\003\001\001\001\003\001\001\001\001\003\001\001\001\001\003\001\001\001\003\001\001\001\001\002\001\001\003\001\001\001\001\003\001\001\001\001\003\001\001\001\003\001\001\001\003\001\001\001\003\001\001\001\003\001\001\001\003\001\001\001\001\001\003\001\001\001\003\001\001\001\001\001\003\001\001\001\002\001\001\003\001\001\001\001\001\003\001\001\001\001\001\003\001\001\001\003\001\001\001\003\001\001"... i = <value optimized out> multibyte_chars = true ret = 0 start = <value optimized out> #8 squat_trie_build_more (ctx=0x8facb48, uid=37, type=SQUAT_INDEX_TYPE_HEADER, input=0x9209c20 "\037\357\277\275\b\b?C\357\277\275L2,S\n\020H!\357\277\275\060 \314\203\357\277\275-!\026\341\222\215\357\277\275{\357\277\275~\357\277\275I\357\277\275R\357\277\275W\337\275U\357\277\275*\357\277\275$\032\005\036WIF=\025\037\031\357\277\275\067S\006\357\277\275FM\357\277\275\352\231\200\035\357\277\275\\\357\277\275\034\357\277\275\\#\357\277\275G:\357\277\275\070\357\277\275\017#\323\215R\357\277\275H#\357\277\275@\002\357\277\275~\357\277\275\065\357\277\275\b\357\277\275K\357\277\275\023\357\277\275.VM\357\277\275Q\357\277\275\061\035G\357\277\275\033\336\243\027\357\277\275OBQ\357\277\275\t\aJ\357\277\275@\357\277\275I\357\277\275"..., size=139516) at squat-trie.c:963 _data_stack_cur_id = 5 ret = 9138 #9 0xb741eb2c in fts_backend_squat_build_more (_ctx=0x8f65760, data=0x9209c20 "\037\357\277\275\b\b?C\357\277\275L2,S\n\020H!\357\277\275\060 \314\203\357\277\275-!\026\341\222\215\357\277\275{\357\277\275~\357\277\275I\357\277\275R\357\277\275W\337\275U\357\277\275*\357\277\275$\032\005\036WIF=\025\037\031\357\277\275\067S\006\357\277\275FM\357\277\275\352\231\200\035\357\277\275\\\357\277\275\034\357\277\275\\#\357\277\275G:\357\277\275\070\357\277\275\017#\323\215R\357\277\275H#\357\277\275@\002\357\277\275~\357\277\275\065\357\277\275\b\357\277\275K\357\277\275\023\357\277\275.VM\357\277\275Q\357\277\275\061\035G\357\277\275\033\336\243\027\357\277\275OBQ\357\277\275\t\aJ\357\277\275@\357\277\275I\357\277\275"..., size=139516) at fts-backend-squat.c:166 ctx = 0x8f65760 #10 0xb746658f in fts_backend_build_more (ctx=0x8f65760, data=0x9209c20 "\037\357\277\275\b\b?C\357\277\275L2,S\n\020H!\357\277\275\060 \314\203\357\277\275-!\026\341\222\215\357\277\275{\357\277\275~\357\277\275I\357\277\275R\357\277\275W\337\275U\357\277\275*\357\277\275$\032\005\036WIF=\025\037\031\357\277\275\067S\006\357\277\275FM\357\277\275\352\231\200\035\357\277\275\\\357\277\275\034\357\277\275\\#\357\277\275G:\357\277\275\070\357\277\275\017#\323\215R\357\277\275H#\357\277\275@\002\357\277\275~\357\277\275\065\357\277\275\b\357\277\275K\357\277\275\023\357\277\275.VM\357\277\275Q\357\277\275\061\035G\357\277\275\033\336\243\027\357\277\275OBQ\357\277\275\t\aJ\357\277\275@\357\277\275I\357\277\275"..., size=139516) at fts-api.c:124 No locals. #11 0xb746976c in fts_build_mail_flush_headers (ctx=0x8fabeb8, mail=0x8f67e00, tryagain_r=0xbfa702ef) at fts-storage.c:83 No locals. #12 fts_build_mail (ctx=0x8fabeb8, mail=0x8f67e00, tryagain_r=0xbfa702ef) at fts-storage.c:240 decoder_flags = <value optimized out> parser = 0x0 decoder = 0x0 raw_block = {part = 0x8f172e8, hdr = 0x0, data = 0x0, size = 0} prev_part = 0x8f172e8 skip_body = false block = {part = 0x8f172e8, hdr = 0x0, data = 0x91fc9f8 "", size = 188} ret = <value optimized out> input = 0x91f8908 parts = 0x8f172e8 body_part = true #13 fts_build_more (ctx=0x8fabeb8, mail=0x8f67e00, tryagain_r=0xbfa702ef) at fts-storage.c:625 _data_stack_cur_id = 4 count = 3 ret = 150653856 #14 fts_mailbox_search_next_nonblock (ctx=0x8fabeb8, mail=0x8f67e00, tryagain_r=0xbfa702ef) at fts-storage.c:728 fbox = 0x8f6c948 fctx = 0x8fb4ae8 ret = <value optimized out> #15 0xb768e9b8 in mailbox_search_next_nonblock (ctx=0x8fabeb8, mail=0x8f67e00, tryagain_r=0xbfa702ef) at mail-storage.c:1182 box = <value optimized out> #16 0x0805cbe6 in cmd_search_more (cmd=0x8f41048) at imap-search.c:347 ctx = 0x8f41108 opts = SEARCH_RETURN_ALL sync_flags = <value optimized out> end_time = {tv_sec = -1218030400, tv_usec = -1079573752} range = <value optimized out> count = <value optimized out> id = <value optimized out> id_min = 0 id_max = 0 ok_reply = <value optimized out> time_msecs = <value optimized out> tryagain = <value optimized out> minmax = false lost_data = <value optimized out> __FUNCTION__ = "cmd_search_more" #17 0x0805d5c1 in imap_search_start (ctx=0x8f41108, sargs=0x8fb32d8, sort_program=0x0) at imap-search.c:551 cmd = 0x8f41048 wanted_fields = 0 wanted_headers = <value optimized out> #18 0x0805376c in cmd_search (cmd=0x8f41048) at cmd-search.c:45 ctx = 0x8f41108 sargs = 0x8fb32d8 args = 0x8f43898 charset = 0x8f43908 "ISO-8859-1" ret = <value optimized out> #19 0x08056abc in client_command_input (cmd=0x8f41048) at imap-client.c:661 client = 0x8f40be0 command = <value optimized out> __FUNCTION__ = "client_command_input" #20 0x08056b88 in client_command_input (cmd=0x8f41048) at imap-client.c:711 client = 0x8f40be0 command = <value optimized out> __FUNCTION__ = "client_command_input" #21 0x08056ddd in client_handle_next_command (client=0x8f40be0) at imap-client.c:752 size = 56 #22 client_handle_input (client=0x8f40be0) at imap-client.c:764 _data_stack_cur_id = 3 ret = false remove_io = false handled_commands = false __FUNCTION__ = "client_handle_input" #23 0x080576cf in client_input (client=0x8f40be0) at imap-client.c:803 cmd = <value optimized out> output = 0x8f3b9ec bytes = 56 __FUNCTION__ = "client_input" #24 0xb763de81 in io_loop_call_io (io=0x8f40fc8) at ioloop.c:384 ioloop = 0x8f1f368 t_id = 2 #25 0xb763f0b3 in io_loop_handler_run (ioloop=0x8f1f368) at ioloop-epoll.c:213 ctx = 0x8f1f490 events = <value optimized out> event = 0x8f1f4d0 list = 0x8f40ff0 io = <value optimized out> tv = {tv_sec = 4, tv_usec = 63505} events_count = 150212592 msecs = 1 ret = 1 i = <value optimized out> j = <value optimized out> call = <value optimized out> #26 0xb763de00 in io_loop_run (ioloop=0x8f1f368) at ioloop.c:405 No locals. #27 0xb76298ea in master_service_run (service=0x8f1f2b8, callback=0x805fc50 <client_connected>) at master-service.c:484 No locals. #28 0x08060395 in main (argc=1, argv=0x8f1f1c0) at main.c:375 set_roots = {0x8062d00, 0x0} service_flags = <value optimized out> storage_service_flags = <value optimized out> postlogin_socket_path = <value optimized out> username = <value optimized out> c = <value optimized out> ----- End forwarded message ----- ----- Forwarded message from root <root(a)postamt.charite.de> ----- Date: Wed, 02 Feb 2011 04:28:35 +0100 GNU gdb (GDB) 7.0.1-debian Copyright (C) 2009 Free Software Foundation, Inc. License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html> This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law. Type "show copying" and "show warranty" for details. This GDB was configured as "i486-linux-gnu". For bug reporting instructions, please see: <http://www.gnu.org/software/gdb/bugs/>... Reading symbols from /usr/dovecot-2/libexec/dovecot/imap...done. Reading symbols from /usr/dovecot-2/lib/dovecot/libdovecot-storage.so.0...done. Loaded symbols for /usr/dovecot-2/lib/dovecot/libdovecot-storage.so.0 Reading symbols from /usr/dovecot-2/lib/dovecot/libdovecot.so.0...done. Loaded symbols for /usr/dovecot-2/lib/dovecot/libdovecot.so.0 Reading symbols from /lib/i686/cmov/libc.so.6...Reading symbols from /usr/lib/debug/lib/i686/cmov/libc-2.11.2.so...done. (no debugging symbols found)...done. Loaded symbols for /lib/i686/cmov/libc.so.6 Reading symbols from /lib/i686/cmov/libdl.so.2...Reading symbols from /usr/lib/debug/lib/i686/cmov/libdl-2.11.2.so...done. (no debugging symbols found)...done. Loaded symbols for /lib/i686/cmov/libdl.so.2 Reading symbols from /lib/i686/cmov/librt.so.1...Reading symbols from /usr/lib/debug/lib/i686/cmov/librt-2.11.2.so...done. (no debugging symbols found)...done. Loaded symbols for /lib/i686/cmov/librt.so.1 Reading symbols from /lib/ld-linux.so.2...Reading symbols from /usr/lib/debug/lib/ld-2.11.2.so...done. (no debugging symbols found)...done. Loaded symbols for /lib/ld-linux.so.2 Reading symbols from /lib/i686/cmov/libpthread.so.0...Reading symbols from /usr/lib/debug/lib/i686/cmov/libpthread-2.11.2.so...done. (no debugging symbols found)...done. Loaded symbols for /lib/i686/cmov/libpthread.so.0 Reading symbols from /usr/dovecot-2/lib/dovecot/lib10_quota_plugin.so...done. Loaded symbols for /usr/dovecot-2/lib/dovecot/lib10_quota_plugin.so Reading symbols from /usr/dovecot-2/lib/dovecot/lib11_imap_quota_plugin.so...done. Loaded symbols for /usr/dovecot-2/lib/dovecot/lib11_imap_quota_plugin.so Reading symbols from /usr/dovecot-2/lib/dovecot/lib11_trash_plugin.so...done. Loaded symbols for /usr/dovecot-2/lib/dovecot/lib11_trash_plugin.so Reading symbols from /usr/dovecot-2/lib/dovecot/lib15_notify_plugin.so...done. Loaded symbols for /usr/dovecot-2/lib/dovecot/lib15_notify_plugin.so Reading symbols from /usr/dovecot-2/lib/dovecot/lib20_fts_plugin.so...done. Loaded symbols for /usr/dovecot-2/lib/dovecot/lib20_fts_plugin.so Reading symbols from /usr/dovecot-2/lib/dovecot/lib20_mail_log_plugin.so...done. Loaded symbols for /usr/dovecot-2/lib/dovecot/lib20_mail_log_plugin.so Reading symbols from /usr/dovecot-2/lib/dovecot/lib20_zlib_plugin.so...done. Loaded symbols for /usr/dovecot-2/lib/dovecot/lib20_zlib_plugin.so Reading symbols from /usr/lib/libz.so.1...(no debugging symbols found)...done. Loaded symbols for /usr/lib/libz.so.1 Reading symbols from /lib/libbz2.so.1.0...(no debugging symbols found)...done. Loaded symbols for /lib/libbz2.so.1.0 Reading symbols from /usr/dovecot-2/lib/dovecot/lib21_fts_squat_plugin.so...done. Loaded symbols for /usr/dovecot-2/lib/dovecot/lib21_fts_squat_plugin.so Reading symbols from /usr/lib/gconv/ISO8859-1.so...Reading symbols from /usr/lib/debug/usr/lib/gconv/ISO8859-1.so...done. (no debugging symbols found)...done. Loaded symbols for /usr/lib/gconv/ISO8859-1.so Reading symbols from /lib/libgcc_s.so.1...(no debugging symbols found)...done. Loaded symbols for /lib/libgcc_s.so.1 Core was generated by `dovecot/imap'. Program terminated with signal 6, Aborted. #0 0xb7832430 in __kernel_vsyscall () #0 0xb7832430 in __kernel_vsyscall () No symbol table info available. #1 0xb75d4751 in *__GI_raise (sig=6) at ../nptl/sysdeps/unix/sysv/linux/raise.c:64 resultvar = <value optimized out> pid = -1217478668 selftid = 4944 #2 0xb75d7b82 in *__GI_abort () at abort.c:92 act = {__sigaction_handler = {sa_handler = 0xbf911fb0, sa_sigaction = 0xbf911fb0}, sa_mask = {__val = {3078823344, 3213959044, 3078865474, 3213959028, 3077570048, 3213959016, 3078945364, 0, 3077508392, 1, 0, 1, 3078822904, 37, 3213958936, 3077795744, 3077790571, 3078010088, 3213959020, 3071949144, 0, 3213959088, 3213959016, 3213959028, 3077795437, 3078822904, 0, 1733, 3213959048, 3077595895, 3213959020, 10}}, sa_flags = -1081008156, sa_restorer = 0xb776c9cc <pid.3441>} sigs = {__val = {32, 0 <repeats 31 times>}} #3 0xb7737875 in default_fatal_finish (type=<value optimized out>, status=<value optimized out>) at failures.c:187 backtrace = 0xb71a3148 "/usr/dovecot-2/lib/dovecot/libdovecot.so.0(+0x3b861) [0xb7737861] -> /usr/dovecot-2/lib/dovecot/libdovecot.so.0(+0x3b8cf) [0xb77378cf] -> /usr/dovecot-2/lib/dovecot/libdovecot.so.0(i_fatal+0) [0xb770e"... #4 0xb77378cf in i_internal_fatal_handler (ctx=0xbf912054, format=0xb752dfd4 "file %s: line %d (%s): assertion failed: (%s)", args=0xbf912074 "U\341R\267l\003") at failures.c:645 status = 0 #5 0xb770e69e in i_panic ( format=0xb752dfd4 "file %s: line %d (%s): assertion failed: (%s)") at failures.c:259 ctx = {type = LOG_TYPE_PANIC, exit_status = 0, timestamp = 0x0} args = 0xbf912074 "U\341R\267l\003" #6 0xb75285ca in squat_build_word (ctx=0x868ce30, uid=75, data=0xb71833c7 "\r\211", char_lengths=0xb72043c7 "\001\002\003", size=2) at squat-trie.c:876 trie = 0x868ae48 i = <value optimized out> j = <value optimized out> bytelen = <value optimized out> __FUNCTION__ = "squat_build_word" #7 0xb7528e46 in squat_trie_build_more_real (ctx=0x868ce30, uid=37, type=SQUAT_INDEX_TYPE_HEADER, input=0x8b27658 "\037\357\277\275\b\b?C\357\277\275L2,S\n\020H!\357\277\275\060 \314\203\357\277\275-!\026\341\222\215\357\277\275{\357\277\275~\357\277\275I\357\277\275R\357\277\275W\337\275U\357\277\275*\357\277\275$\032\005\036WIF=\025\037\031\357\277\275\067S\006\357\277\275FM\357\277\275\352\231\200\035\357\277\275\\\357\277\275\034\357\277\275\\#\357\277\275G:\357\277\275\070\357\277\275\017#\323\215R\357\277\275H#\357\277\275@\002\357\277\275~\357\277\275\065\357\277\275\b\357\277\275K\357\277\275\023\357\277\275.VM\357\277\275Q\357\277\275\061\035G\357\277\275\033\336\243\027\357\277\275OBQ\357\277\275\t\aJ\357\277\275@\357\277\275I\357\277\275"..., size=139516) at squat-trie.c:934 trie = <value optimized out> data = 0xb7181018 "" char_lengths = 0xb7202018 "\001\003\001\001\001\001\001\001\003\001\001\001\001\001\001\001\001\001\001\003\001\001\001\001\002\001\003\001\001\001\001\001\003\001\001\003\001\001\001\003\001\001\001\003\001\001\001\003\001\001\001\003\001\001\001\002\001\001\003\001\001\001\003", '\001' <repeats 13 times>, "\003\001\001\001\001\001\003\001\001\001\001\003\001\001\003\001\001\001\003\001\001\001\003\001\001\001\003\001\001\001\001\003\001\001\001\001\003\001\001\001\003\001\001\001\001\002\001\001\003\001\001\001\001\003\001\001\001\001\003\001\001\001\003\001\001\001\003\001\001\001\003\001\001\001\003\001\001\001\003\001\001\001\001\001\003\001\001\001\003\001\001\001\001\001\003\001\001\001\002\001\001\003\001\001\001\001\001\003\001\001\001\001\001\003\001\001\001\003\001\001\001\003\001\001"... i = <value optimized out> multibyte_chars = true ret = 0 start = <value optimized out> #8 squat_trie_build_more (ctx=0x868ce30, uid=37, type=SQUAT_INDEX_TYPE_HEADER, input=0x8b27658 "\037\357\277\275\b\b?C\357\277\275L2,S\n\020H!\357\277\275\060 \314\203\357\277\275-!\026\341\222\215\357\277\275{\357\277\275~\357\277\275I\357\277\275R\357\277\275W\337\275U\357\277\275*\357\277\275$\032\005\036WIF=\025\037\031\357\277\275\067S\006\357\277\275FM\357\277\275\352\231\200\035\357\277\275\\\357\277\275\034\357\277\275\\#\357\277\275G:\357\277\275\070\357\277\275\017#\323\215R\357\277\275H#\357\277\275@\002\357\277\275~\357\277\275\065\357\277\275\b\357\277\275K\357\277\275\023\357\277\275.VM\357\277\275Q\357\277\275\061\035G\357\277\275\033\336\243\027\357\277\275OBQ\357\277\275\t\aJ\357\277\275@\357\277\275I\357\277\275"..., size=139516) at squat-trie.c:963 _data_stack_cur_id = 5 ret = 9138 #9 0xb7525b2c in fts_backend_squat_build_more (_ctx=0x868ae30, data=0x8b27658 "\037\357\277\275\b\b?C\357\277\275L2,S\n\020H!\357\277\275\060 \314\203\357\277\275-!\026\341\222\215\357\277\275{\357\277\275~\357\277\275I\357\277\275R\357\277\275W\337\275U\357\277\275*\357\277\275$\032\005\036WIF=\025\037\031\357\277\275\067S\006\357\277\275FM\357\277\275\352\231\200\035\357\277\275\\\357\277\275\034\357\277\275\\#\357\277\275G:\357\277\275\070\357\277\275\017#\323\215R\357\277\275H#\357\277\275@\002\357\277\275~\357\277\275\065\357\277\275\b\357\277\275K\357\277\275\023\357\277\275.VM\357\277\275Q\357\277\275\061\035G\357\277\275\033\336\243\027\357\277\275OBQ\357\277\275\t\aJ\357\277\275@\357\277\275I\357\277\275"..., size=139516) at fts-backend-squat.c:166 ctx = 0x868ae30 #10 0xb756d58f in fts_backend_build_more (ctx=0x868ae30, data=0x8b27658 "\037\357\277\275\b\b?C\357\277\275L2,S\n\020H!\357\277\275\060 \314\203\357\277\275-!\026\341\222\215\357\277\275{\357\277\275~\357\277\275I\357\277\275R\357\277\275W\337\275U\357\277\275*\357\277\275$\032\005\036WIF=\025\037\031\357\277\275\067S\006\357\277\275FM\357\277\275\352\231\200\035\357\277\275\\\357\277\275\034\357\277\275\\#\357\277\275G:\357\277\275\070\357\277\275\017#\323\215R\357\277\275H#\357\277\275@\002\357\277\275~\357\277\275\065\357\277\275\b\357\277\275K\357\277\275\023\357\277\275.VM\357\277\275Q\357\277\275\061\035G\357\277\275\033\336\243\027\357\277\275OBQ\357\277\275\t\aJ\357\277\275@\357\277\275I\357\277\275"..., size=139516) at fts-api.c:124 No locals. #11 0xb757076c in fts_build_mail_flush_headers (ctx=0x868a778, mail=0x868ea40, tryagain_r=0xbf91232f) at fts-storage.c:83 No locals. #12 fts_build_mail (ctx=0x868a778, mail=0x868ea40, tryagain_r=0xbf91232f) at fts-storage.c:240 decoder_flags = <value optimized out> parser = 0x0 decoder = 0x0 raw_block = {part = 0x86382e8, hdr = 0x0, data = 0x0, size = 0} prev_part = 0x86382e8 skip_body = false block = {part = 0x86382e8, hdr = 0x0, data = 0x8b1a430 "", size = 188} ret = <value optimized out> input = 0x8b16340 parts = 0x86382e8 body_part = true #13 fts_build_more (ctx=0x868a778, mail=0x868ea40, tryagain_r=0xbf91232f) at fts-storage.c:625 _data_stack_cur_id = 4 count = 3 ret = 141090448 #14 fts_mailbox_search_next_nonblock (ctx=0x868a778, mail=0x868ea40, tryagain_r=0xbf91232f) at fts-storage.c:728 fbox = 0x8692798 fctx = 0x868a868 ret = <value optimized out> #15 0xb77959b8 in mailbox_search_next_nonblock (ctx=0x868a778, mail=0x868ea40, tryagain_r=0xbf91232f) at mail-storage.c:1182 box = <value optimized out> #16 0x0805cbe6 in cmd_search_more (cmd=0x8662048) at imap-search.c:347 ctx = 0x8662110 opts = SEARCH_RETURN_ALL sync_flags = <value optimized out> end_time = {tv_sec = -1216953152, tv_usec = -1081007288} range = <value optimized out> count = <value optimized out> id = <value optimized out> id_min = 0 id_max = 0 ok_reply = <value optimized out> time_msecs = <value optimized out> tryagain = <value optimized out> minmax = false lost_data = <value optimized out> __FUNCTION__ = "cmd_search_more" #17 0x0805d5c1 in imap_search_start (ctx=0x8662110, sargs=0x868b158, sort_program=0x0) at imap-search.c:551 cmd = 0x8662048 wanted_fields = 0 wanted_headers = <value optimized out> #18 0x0805376c in cmd_search (cmd=0x8662048) at cmd-search.c:45 ctx = 0x8662110 sargs = 0x868b158 args = 0x8664898 charset = 0x8664908 "ISO-8859-1" ret = <value optimized out> #19 0x08056abc in client_command_input (cmd=0x8662048) at imap-client.c:661 client = 0x8661be0 command = <value optimized out> __FUNCTION__ = "client_command_input" #20 0x08056b88 in client_command_input (cmd=0x8662048) at imap-client.c:711 client = 0x8661be0 command = <value optimized out> __FUNCTION__ = "client_command_input" #21 0x08056ddd in client_handle_next_command (client=0x8661be0) at imap-client.c:752 size = 61 #22 client_handle_input (client=0x8661be0) at imap-client.c:764 _data_stack_cur_id = 3 ret = false remove_io = false handled_commands = false __FUNCTION__ = "client_handle_input" #23 0x080576cf in client_input (client=0x8661be0) at imap-client.c:803 cmd = <value optimized out> output = 0x865c9ec bytes = 61 __FUNCTION__ = "client_input" #24 0xb7744e81 in io_loop_call_io (io=0x8661fc8) at ioloop.c:384 ioloop = 0x8640368 t_id = 2 #25 0xb77460b3 in io_loop_handler_run (ioloop=0x8640368) at ioloop-epoll.c:213 ctx = 0x8640490 events = <value optimized out> event = 0x86404d0 list = 0x8661ff0 io = <value optimized out> tv = {tv_sec = 4, tv_usec = 874818} events_count = 140910576 msecs = 1 ret = 1 i = <value optimized out> j = <value optimized out> call = <value optimized out> #26 0xb7744e00 in io_loop_run (ioloop=0x8640368) at ioloop.c:405 No locals. #27 0xb77308ea in master_service_run (service=0x86402b8, callback=0x805fc50 <client_connected>) at master-service.c:484 No locals. #28 0x08060395 in main (argc=1, argv=0x86401c0) at main.c:375 set_roots = {0x8062d00, 0x0} service_flags = <value optimized out> storage_service_flags = <value optimized out> postlogin_socket_path = <value optimized out> username = <value optimized out> c = <value optimized out> ----- End forwarded message ----- ----- Forwarded message from root <root(a)postamt.charite.de> ----- Date: Wed, 02 Feb 2011 04:28:35 +0100 GNU gdb (GDB) 7.0.1-debian Copyright (C) 2009 Free Software Foundation, Inc. License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html> This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law. Type "show copying" and "show warranty" for details. This GDB was configured as "i486-linux-gnu". For bug reporting instructions, please see: <http://www.gnu.org/software/gdb/bugs/>... Reading symbols from /usr/dovecot-2/libexec/dovecot/imap...done. Reading symbols from /usr/dovecot-2/lib/dovecot/libdovecot-storage.so.0...done. Loaded symbols for /usr/dovecot-2/lib/dovecot/libdovecot-storage.so.0 Reading symbols from /usr/dovecot-2/lib/dovecot/libdovecot.so.0...done. Loaded symbols for /usr/dovecot-2/lib/dovecot/libdovecot.so.0 Reading symbols from /lib/i686/cmov/libc.so.6...Reading symbols from /usr/lib/debug/lib/i686/cmov/libc-2.11.2.so...done. (no debugging symbols found)...done. Loaded symbols for /lib/i686/cmov/libc.so.6 Reading symbols from /lib/i686/cmov/libdl.so.2...Reading symbols from /usr/lib/debug/lib/i686/cmov/libdl-2.11.2.so...done. (no debugging symbols found)...done. Loaded symbols for /lib/i686/cmov/libdl.so.2 Reading symbols from /lib/i686/cmov/librt.so.1...Reading symbols from /usr/lib/debug/lib/i686/cmov/librt-2.11.2.so...done. (no debugging symbols found)...done. Loaded symbols for /lib/i686/cmov/librt.so.1 Reading symbols from /lib/ld-linux.so.2...Reading symbols from /usr/lib/debug/lib/ld-2.11.2.so...done. (no debugging symbols found)...done. Loaded symbols for /lib/ld-linux.so.2 Reading symbols from /lib/i686/cmov/libpthread.so.0...Reading symbols from /usr/lib/debug/lib/i686/cmov/libpthread-2.11.2.so...done. (no debugging symbols found)...done. Loaded symbols for /lib/i686/cmov/libpthread.so.0 Reading symbols from /usr/dovecot-2/lib/dovecot/lib10_quota_plugin.so...done. Loaded symbols for /usr/dovecot-2/lib/dovecot/lib10_quota_plugin.so Reading symbols from /usr/dovecot-2/lib/dovecot/lib11_imap_quota_plugin.so...done. Loaded symbols for /usr/dovecot-2/lib/dovecot/lib11_imap_quota_plugin.so Reading symbols from /usr/dovecot-2/lib/dovecot/lib11_trash_plugin.so...done. Loaded symbols for /usr/dovecot-2/lib/dovecot/lib11_trash_plugin.so Reading symbols from /usr/dovecot-2/lib/dovecot/lib15_notify_plugin.so...done. Loaded symbols for /usr/dovecot-2/lib/dovecot/lib15_notify_plugin.so Reading symbols from /usr/dovecot-2/lib/dovecot/lib20_fts_plugin.so...done. Loaded symbols for /usr/dovecot-2/lib/dovecot/lib20_fts_plugin.so Reading symbols from /usr/dovecot-2/lib/dovecot/lib20_mail_log_plugin.so...done. Loaded symbols for /usr/dovecot-2/lib/dovecot/lib20_mail_log_plugin.so Reading symbols from /usr/dovecot-2/lib/dovecot/lib20_zlib_plugin.so...done. Loaded symbols for /usr/dovecot-2/lib/dovecot/lib20_zlib_plugin.so Reading symbols from /usr/lib/libz.so.1...(no debugging symbols found)...done. Loaded symbols for /usr/lib/libz.so.1 Reading symbols from /lib/libbz2.so.1.0...(no debugging symbols found)...done. Loaded symbols for /lib/libbz2.so.1.0 Reading symbols from /usr/dovecot-2/lib/dovecot/lib21_fts_squat_plugin.so...done. Loaded symbols for /usr/dovecot-2/lib/dovecot/lib21_fts_squat_plugin.so Reading symbols from /usr/lib/gconv/ISO8859-1.so...Reading symbols from /usr/lib/debug/usr/lib/gconv/ISO8859-1.so...done. (no debugging symbols found)...done. Loaded symbols for /usr/lib/gconv/ISO8859-1.so Reading symbols from /lib/libgcc_s.so.1...(no debugging symbols found)...done. Loaded symbols for /lib/libgcc_s.so.1 Core was generated by `dovecot/imap'. Program terminated with signal 6, Aborted. #0 0xb789c430 in __kernel_vsyscall () #0 0xb789c430 in __kernel_vsyscall () No symbol table info available. #1 0xb763e751 in *__GI_raise (sig=6) at ../nptl/sysdeps/unix/sysv/linux/raise.c:64 resultvar = <value optimized out> pid = -1217044492 selftid = 4952 #2 0xb7641b82 in *__GI_abort () at abort.c:92 act = {__sigaction_handler = {sa_handler = 0xbfcd0b70, sa_sigaction = 0xbfcd0b70}, sa_mask = {__val = {3079257520, 3217886020, 3079299650, 3217886004, 3078004224, 3217885992, 3079379540, 0, 3077942568, 1, 0, 1, 3079257080, 37, 3217885912, 3078229920, 3078224747, 3078444264, 3217885996, 3072117080, 0, 3217886064, 3217885992, 3217886004, 3078229613, 3079257080, 0, 1733, 3217886024, 3078030071, 3217885996, 10}}, sa_flags = -1077081180, sa_restorer = 0xb77d69cc <pid.3441>} sigs = {__val = {32, 0 <repeats 31 times>}} #3 0xb77a1875 in default_fatal_finish (type=<value optimized out>, status=<value optimized out>) at failures.c:187 backtrace = 0xb71cc148 "/usr/dovecot-2/lib/dovecot/libdovecot.so.0(+0x3b861) [0xb77a1861] -> /usr/dovecot-2/lib/dovecot/libdovecot.so.0(+0x3b8cf) [0xb77a18cf] -> /usr/dovecot-2/lib/dovecot/libdovecot.so.0(i_fatal+0) [0xb7778"... #4 0xb77a18cf in i_internal_fatal_handler (ctx=0xbfcd0c14, format=0xb7597fd4 "file %s: line %d (%s): assertion failed: (%s)", args=0xbfcd0c34 "U\201Y\267l\003") at failures.c:645 status = 0 #5 0xb777869e in i_panic ( format=0xb7597fd4 "file %s: line %d (%s): assertion failed: (%s)") at failures.c:259 ctx = {type = LOG_TYPE_PANIC, exit_status = 0, timestamp = 0x0} args = 0xbfcd0c34 "U\201Y\267l\003" #6 0xb75925ca in squat_build_word (ctx=0x92c8e30, uid=75, data=0xb71ac3c7 "\r\211", char_lengths=0xb722d3c7 "\001\002\003", size=2) at squat-trie.c:876 trie = 0x92c6e48 i = <value optimized out> j = <value optimized out> bytelen = <value optimized out> __FUNCTION__ = "squat_build_word" #7 0xb7592e46 in squat_trie_build_more_real (ctx=0x92c8e30, uid=37, type=SQUAT_INDEX_TYPE_HEADER, input=0xb726c008 "\037\357\277\275\b\b?C\357\277\275L2,S\n\020H!\357\277\275\060 \314\203\357\277\275-!\026\341\222\215\357\277\275{\357\277\275~\357\277\275I\357\277\275R\357\277\275W\337\275U\357\277\275*\357\277\275$\032\005\036WIF=\025\037\031\357\277\275\067S\006\357\277\275FM\357\277\275\352\231\200\035\357\277\275\\\357\277\275\034\357\277\275\\#\357\277\275G:\357\277\275\070\357\277\275\017#\323\215R\357\277\275H#\357\277\275@\002\357\277\275~\357\277\275\065\357\277\275\b\357\277\275K\357\277\275\023\357\277\275.VM\357\277\275Q\357\277\275\061\035G\357\277\275\033\336\243\027\357\277\275OBQ\357\277\275\t\aJ\357\277\275@\357\277\275I\357\277\275"..., size=139516) at squat-trie.c:934 trie = <value optimized out> data = 0xb71aa018 "" char_lengths = 0xb722b018 "\001\003\001\001\001\001\001\001\003\001\001\001\001\001\001\001\001\001\001\003\001\001\001\001\002\001\003\001\001\001\001\001\003\001\001\003\001\001\001\003\001\001\001\003\001\001\001\003\001\001\001\003\001\001\001\002\001\001\003\001\001\001\003", '\001' <repeats 13 times>, "\003\001\001\001\001\001\003\001\001\001\001\003\001\001\003\001\001\001\003\001\001\001\003\001\001\001\003\001\001\001\001\003\001\001\001\001\003\001\001\001\003\001\001\001\001\002\001\001\003\001\001\001\001\003\001\001\001\001\003\001\001\001\003\001\001\001\003\001\001\001\003\001\001\001\003\001\001\001\003\001\001\001\001\001\003\001\001\001\003\001\001\001\001\001\003\001\001\001\002\001\001\003\001\001\001\001\001\003\001\001\001\001\001\003\001\001\001\003\001\001\001\003\001\001"... i = <value optimized out> multibyte_chars = true ret = 0 start = <value optimized out> #8 squat_trie_build_more (ctx=0x92c8e30, uid=37, type=SQUAT_INDEX_TYPE_HEADER, input=0xb726c008 "\037\357\277\275\b\b?C\357\277\275L2,S\n\020H!\357\277\275\060 \314\203\357\277\275-!\026\341\222\215\357\277\275{\357\277\275~\357\277\275I\357\277\275R\357\277\275W\337\275U\357\277\275*\357\277\275$\032\005\036WIF=\025\037\031\357\277\275\067S\006\357\277\275FM\357\277\275\352\231\200\035\357\277\275\\\357\277\275\034\357\277\275\\#\357\277\275G:\357\277\275\070\357\277\275\017#\323\215R\357\277\275H#\357\277\275@\002\357\277\275~\357\277\275\065\357\277\275\b\357\277\275K\357\277\275\023\357\277\275.VM\357\277\275Q\357\277\275\061\035G\357\277\275\033\336\243\027\357\277\275OBQ\357\277\275\t\aJ\357\277\275@\357\277\275I\357\277\275"..., size=139516) at squat-trie.c:963 _data_stack_cur_id = 5 ret = 9138 #9 0xb758fb2c in fts_backend_squat_build_more (_ctx=0x92c6e30, data=0xb726c008 "\037\357\277\275\b\b?C\357\277\275L2,S\n\020H!\357\277\275\060 \314\203\357\277\275-!\026\341\222\215\357\277\275{\357\277\275~\357\277\275I\357\277\275R\357\277\275W\337\275U\357\277\275*\357\277\275$\032\005\036WIF=\025\037\031\357\277\275\067S\006\357\277\275FM\357\277\275\352\231\200\035\357\277\275\\\357\277\275\034\357\277\275\\#\357\277\275G:\357\277\275\070\357\277\275\017#\323\215R\357\277\275H#\357\277\275@\002\357\277\275~\357\277\275\065\357\277\275\b\357\277\275K\357\277\275\023\357\277\275.VM\357\277\275Q\357\277\275\061\035G\357\277\275\033\336\243\027\357\277\275OBQ\357\277\275\t\aJ\357\277\275@\357\277\275I\357\277\275"..., size=139516) at fts-backend-squat.c:166 ctx = 0x92c6e30 #10 0xb75d758f in fts_backend_build_more (ctx=0x92c6e30, data=0xb726c008 "\037\357\277\275\b\b?C\357\277\275L2,S\n\020H!\357\277\275\060 \314\203\357\277\275-!\026\341\222\215\357\277\275{\357\277\275~\357\277\275I\357\277\275R\357\277\275W\337\275U\357\277\275*\357\277\275$\032\005\036WIF=\025\037\031\357\277\275\067S\006\357\277\275FM\357\277\275\352\231\200\035\357\277\275\\\357\277\275\034\357\277\275\\#\357\277\275G:\357\277\275\070\357\277\275\017#\323\215R\357\277\275H#\357\277\275@\002\357\277\275~\357\277\275\065\357\277\275\b\357\277\275K\357\277\275\023\357\277\275.VM\357\277\275Q\357\277\275\061\035G\357\277\275\033\336\243\027\357\277\275OBQ\357\277\275\t\aJ\357\277\275@\357\277\275I\357\277\275"..., size=139516) at fts-api.c:124 No locals. #11 0xb75da76c in fts_build_mail_flush_headers (ctx=0x92c6778, mail=0x92caa40, tryagain_r=0xbfcd0eef) at fts-storage.c:83 No locals. #12 fts_build_mail (ctx=0x92c6778, mail=0x92caa40, tryagain_r=0xbfcd0eef) at fts-storage.c:240 decoder_flags = <value optimized out> parser = 0x0 decoder = 0x0 raw_block = {part = 0x92742e8, hdr = 0x0, data = 0x0, size = 0} prev_part = 0x92742e8 skip_body = false block = {part = 0x92742e8, hdr = 0x0, data = 0x9756430 "", size = 188} ret = <value optimized out> input = 0x9752340 parts = 0x92742e8 body_part = true #13 fts_build_more (ctx=0x92c6778, mail=0x92caa40, tryagain_r=0xbfcd0eef) at fts-storage.c:625 _data_stack_cur_id = 4 count = 3 ret = 153919120 #14 fts_mailbox_search_next_nonblock (ctx=0x92c6778, mail=0x92caa40, tryagain_r=0xbfcd0eef) at fts-storage.c:728 fbox = 0x92ce798 fctx = 0x92c6868 ret = <value optimized out> #15 0xb77ff9b8 in mailbox_search_next_nonblock (ctx=0x92c6778, mail=0x92caa40, tryagain_r=0xbfcd0eef) at mail-storage.c:1182 box = <value optimized out> #16 0x0805cbe6 in cmd_search_more (cmd=0x929e048) at imap-search.c:347 ctx = 0x929e110 opts = SEARCH_RETURN_ALL sync_flags = <value optimized out> end_time = {tv_sec = -1216518976, tv_usec = -1077080312} range = <value optimized out> count = <value optimized out> id = <value optimized out> id_min = 0 id_max = 0 ok_reply = <value optimized out> time_msecs = <value optimized out> tryagain = <value optimized out> minmax = false lost_data = <value optimized out> __FUNCTION__ = "cmd_search_more" #17 0x0805d5c1 in imap_search_start (ctx=0x929e110, sargs=0x92c7158, sort_program=0x0) at imap-search.c:551 cmd = 0x929e048 wanted_fields = 0 wanted_headers = <value optimized out> #18 0x0805376c in cmd_search (cmd=0x929e048) at cmd-search.c:45 ctx = 0x929e110 sargs = 0x92c7158 args = 0x92a0898 charset = 0x92a0908 "ISO-8859-1" ret = <value optimized out> #19 0x08056abc in client_command_input (cmd=0x929e048) at imap-client.c:661 client = 0x929dbe0 command = <value optimized out> __FUNCTION__ = "client_command_input" #20 0x08056b88 in client_command_input (cmd=0x929e048) at imap-client.c:711 client = 0x929dbe0 command = <value optimized out> __FUNCTION__ = "client_command_input" #21 0x08056ddd in client_handle_next_command (client=0x929dbe0) at imap-client.c:752 size = 61 #22 client_handle_input (client=0x929dbe0) at imap-client.c:764 _data_stack_cur_id = 3 ret = false remove_io = false handled_commands = false __FUNCTION__ = "client_handle_input" #23 0x080576cf in client_input (client=0x929dbe0) at imap-client.c:803 cmd = <value optimized out> output = 0x92989ec bytes = 61 __FUNCTION__ = "client_input" #24 0xb77aee81 in io_loop_call_io (io=0x929dfc8) at ioloop.c:384 ioloop = 0x927c368 t_id = 2 #25 0xb77b00b3 in io_loop_handler_run (ioloop=0x927c368) at ioloop-epoll.c:213 ctx = 0x927c490 events = <value optimized out> event = 0x927c4d0 list = 0x929dff0 io = <value optimized out> tv = {tv_sec = 4, tv_usec = 874073} events_count = 153739248 msecs = 1 ret = 1 i = <value optimized out> j = <value optimized out> call = <value optimized out> #26 0xb77aee00 in io_loop_run (ioloop=0x927c368) at ioloop.c:405 No locals. #27 0xb779a8ea in master_service_run (service=0x927c2b8, callback=0x805fc50 <client_connected>) at master-service.c:484 No locals. #28 0x08060395 in main (argc=1, argv=0x927c1c0) at main.c:375 set_roots = {0x8062d00, 0x0} service_flags = <value optimized out> storage_service_flags = <value optimized out> postlogin_socket_path = <value optimized out> username = <value optimized out> c = <value optimized out> ----- End forwarded message ----- ----- Forwarded message from root <root(a)postamt.charite.de> ----- Date: Wed, 02 Feb 2011 04:45:46 +0100 GNU gdb (GDB) 7.0.1-debian Copyright (C) 2009 Free Software Foundation, Inc. License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html> This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law. Type "show copying" and "show warranty" for details. This GDB was configured as "i486-linux-gnu". For bug reporting instructions, please see: <http://www.gnu.org/software/gdb/bugs/>... Reading symbols from /usr/dovecot-2/libexec/dovecot/imap...done. Reading symbols from /usr/dovecot-2/lib/dovecot/libdovecot-storage.so.0...done. Loaded symbols for /usr/dovecot-2/lib/dovecot/libdovecot-storage.so.0 Reading symbols from /usr/dovecot-2/lib/dovecot/libdovecot.so.0...done. Loaded symbols for /usr/dovecot-2/lib/dovecot/libdovecot.so.0 Reading symbols from /lib/i686/cmov/libc.so.6...Reading symbols from /usr/lib/debug/lib/i686/cmov/libc-2.11.2.so...done. (no debugging symbols found)...done. Loaded symbols for /lib/i686/cmov/libc.so.6 Reading symbols from /lib/i686/cmov/libdl.so.2...Reading symbols from /usr/lib/debug/lib/i686/cmov/libdl-2.11.2.so...done. (no debugging symbols found)...done. Loaded symbols for /lib/i686/cmov/libdl.so.2 Reading symbols from /lib/i686/cmov/librt.so.1...Reading symbols from /usr/lib/debug/lib/i686/cmov/librt-2.11.2.so...done. (no debugging symbols found)...done. Loaded symbols for /lib/i686/cmov/librt.so.1 Reading symbols from /lib/ld-linux.so.2...Reading symbols from /usr/lib/debug/lib/ld-2.11.2.so...done. (no debugging symbols found)...done. Loaded symbols for /lib/ld-linux.so.2 Reading symbols from /lib/i686/cmov/libpthread.so.0...Reading symbols from /usr/lib/debug/lib/i686/cmov/libpthread-2.11.2.so...done. (no debugging symbols found)...done. Loaded symbols for /lib/i686/cmov/libpthread.so.0 Reading symbols from /usr/dovecot-2/lib/dovecot/lib10_quota_plugin.so...done. Loaded symbols for /usr/dovecot-2/lib/dovecot/lib10_quota_plugin.so Reading symbols from /usr/dovecot-2/lib/dovecot/lib11_imap_quota_plugin.so...done. Loaded symbols for /usr/dovecot-2/lib/dovecot/lib11_imap_quota_plugin.so Reading symbols from /usr/dovecot-2/lib/dovecot/lib11_trash_plugin.so...done. Loaded symbols for /usr/dovecot-2/lib/dovecot/lib11_trash_plugin.so Reading symbols from /usr/dovecot-2/lib/dovecot/lib15_notify_plugin.so...done. Loaded symbols for /usr/dovecot-2/lib/dovecot/lib15_notify_plugin.so Reading symbols from /usr/dovecot-2/lib/dovecot/lib20_fts_plugin.so...done. Loaded symbols for /usr/dovecot-2/lib/dovecot/lib20_fts_plugin.so Reading symbols from /usr/dovecot-2/lib/dovecot/lib20_mail_log_plugin.so...done. Loaded symbols for /usr/dovecot-2/lib/dovecot/lib20_mail_log_plugin.so Reading symbols from /usr/dovecot-2/lib/dovecot/lib20_zlib_plugin.so...done. Loaded symbols for /usr/dovecot-2/lib/dovecot/lib20_zlib_plugin.so Reading symbols from /usr/lib/libz.so.1...(no debugging symbols found)...done. Loaded symbols for /usr/lib/libz.so.1 Reading symbols from /lib/libbz2.so.1.0...(no debugging symbols found)...done. Loaded symbols for /lib/libbz2.so.1.0 Reading symbols from /usr/dovecot-2/lib/dovecot/lib21_fts_squat_plugin.so...done. Loaded symbols for /usr/dovecot-2/lib/dovecot/lib21_fts_squat_plugin.so Reading symbols from /usr/lib/gconv/ISO8859-1.so...Reading symbols from /usr/lib/debug/usr/lib/gconv/ISO8859-1.so...done. (no debugging symbols found)...done. Loaded symbols for /usr/lib/gconv/ISO8859-1.so Reading symbols from /lib/libgcc_s.so.1...(no debugging symbols found)...done. Loaded symbols for /lib/libgcc_s.so.1 Core was generated by `dovecot/imap'. Program terminated with signal 6, Aborted. #0 0xb77a8430 in __kernel_vsyscall () #0 0xb77a8430 in __kernel_vsyscall () No symbol table info available. #1 0xb754a751 in *__GI_raise (sig=6) at ../nptl/sysdeps/unix/sysv/linux/raise.c:64 resultvar = <value optimized out> pid = -1218043916 selftid = 7711 #2 0xb754db82 in *__GI_abort () at abort.c:92 act = {__sigaction_handler = {sa_handler = 0xbfd0f520, sa_sigaction = 0xbfd0f520}, sa_mask = {__val = {3078258096, 3218142452, 3078300226, 3218142436, 3077004800, 3218142424, 3078380116, 0, 3076943144, 1, 0, 1, 3078257656, 37, 3218142344, 3077230496, 3077225323, 3077444840, 3218142428, 3071273304, 0, 3218142496, 3218142424, 3218142436, 3077230189, 3078257656, 0, 1733, 3218142456, 3077030647, 3218142428, 10}}, sa_flags = -1076824748, sa_restorer = 0xb76e29cc <pid.3441>} sigs = {__val = {32, 0 <repeats 31 times>}} #3 0xb76ad875 in default_fatal_finish (type=<value optimized out>, status=<value optimized out>) at failures.c:187 backtrace = 0xb70fe148 "/usr/dovecot-2/lib/dovecot/libdovecot.so.0(+0x3b861) [0xb76ad861] -> /usr/dovecot-2/lib/dovecot/libdovecot.so.0(+0x3b8cf) [0xb76ad8cf] -> /usr/dovecot-2/lib/dovecot/libdovecot.so.0(i_fatal+0) [0xb7684"... #4 0xb76ad8cf in i_internal_fatal_handler (ctx=0xbfd0f5c4, format=0xb74a3fd4 "file %s: line %d (%s): assertion failed: (%s)", args=0xbfd0f5e4 "UAJ\267l\003") at failures.c:645 status = 0 #5 0xb768469e in i_panic ( format=0xb74a3fd4 "file %s: line %d (%s): assertion failed: (%s)") at failures.c:259 ctx = {type = LOG_TYPE_PANIC, exit_status = 0, timestamp = 0x0} args = 0xbfd0f5e4 "UAJ\267l\003" #6 0xb749e5ca in squat_build_word (ctx=0x9ef10a8, uid=75, data=0xb70de3c7 "\r\211", char_lengths=0xb715f3c7 "\001\002\003", size=2) at squat-trie.c:876 trie = 0x9eee168 i = <value optimized out> j = <value optimized out> bytelen = <value optimized out> __FUNCTION__ = "squat_build_word" #7 0xb749ee46 in squat_trie_build_more_real (ctx=0x9ef10a8, uid=37, type=SQUAT_INDEX_TYPE_HEADER, input=0xb719e008 "\037\357\277\275\b\b?C\357\277\275L2,S\n\020H!\357\277\275\060 \314\203\357\277\275-!\026\341\222\215\357\277\275{\357\277\275~\357\277\275I\357\277\275R\357\277\275W\337\275U\357\277\275*\357\277\275$\032\005\036WIF=\025\037\031\357\277\275\067S\006\357\277\275FM\357\277\275\352\231\200\035\357\277\275\\\357\277\275\034\357\277\275\\#\357\277\275G:\357\277\275\070\357\277\275\017#\323\215R\357\277\275H#\357\277\275@\002\357\277\275~\357\277\275\065\357\277\275\b\357\277\275K\357\277\275\023\357\277\275.VM\357\277\275Q\357\277\275\061\035G\357\277\275\033\336\243\027\357\277\275OBQ\357\277\275\t\aJ\357\277\275@\357\277\275I\357\277\275"..., size=139516) at squat-trie.c:934 trie = <value optimized out> data = 0xb70dc018 "" char_lengths = 0xb715d018 "\001\003\001\001\001\001\001\001\003\001\001\001\001\001\001\001\001\001\001\003\001\001\001\001\002\001\003\001\001\001\001\001\003\001\001\003\001\001\001\003\001\001\001\003\001\001\001\003\001\001\001\003\001\001\001\002\001\001\003\001\001\001\003", '\001' <repeats 13 times>, "\003\001\001\001\001\001\003\001\001\001\001\003\001\001\003\001\001\001\003\001\001\001\003\001\001\001\003\001\001\001\001\003\001\001\001\001\003\001\001\001\003\001\001\001\001\002\001\001\003\001\001\001\001\003\001\001\001\001\003\001\001\001\003\001\001\001\003\001\001\001\003\001\001\001\003\001\001\001\003\001\001\001\001\001\003\001\001\001\003\001\001\001\001\001\003\001\001\001\002\001\001\003\001\001\001\001\001\003\001\001\001\001\001\003\001\001\001\003\001\001\001\003\001\001"... i = <value optimized out> multibyte_chars = true ret = 0 start = <value optimized out> #8 squat_trie_build_more (ctx=0x9ef10a8, uid=37, type=SQUAT_INDEX_TYPE_HEADER, input=0xb719e008 "\037\357\277\275\b\b?C\357\277\275L2,S\n\020H!\357\277\275\060 \314\203\357\277\275-!\026\341\222\215\357\277\275{\357\277\275~\357\277\275I\357\277\275R\357\277\275W\337\275U\357\277\275*\357\277\275$\032\005\036WIF=\025\037\031\357\277\275\067S\006\357\277\275FM\357\277\275\352\231\200\035\357\277\275\\\357\277\275\034\357\277\275\\#\357\277\275G:\357\277\275\070\357\277\275\017#\323\215R\357\277\275H#\357\277\275@\002\357\277\275~\357\277\275\065\357\277\275\b\357\277\275K\357\277\275\023\357\277\275.VM\357\277\275Q\357\277\275\061\035G\357\277\275\033\336\243\027\357\277\275OBQ\357\277\275\t\aJ\357\277\275@\357\277\275I\357\277\275"..., size=139516) at squat-trie.c:963 _data_stack_cur_id = 5 ret = 9138 #9 0xb749bb2c in fts_backend_squat_build_more (_ctx=0x9ef10c8, data=0xb719e008 "\037\357\277\275\b\b?C\357\277\275L2,S\n\020H!\357\277\275\060 \314\203\357\277\275-!\026\341\222\215\357\277\275{\357\277\275~\357\277\275I\357\277\275R\357\277\275W\337\275U\357\277\275*\357\277\275$\032\005\036WIF=\025\037\031\357\277\275\067S\006\357\277\275FM\357\277\275\352\231\200\035\357\277\275\\\357\277\275\034\357\277\275\\#\357\277\275G:\357\277\275\070\357\277\275\017#\323\215R\357\277\275H#\357\277\275@\002\357\277\275~\357\277\275\065\357\277\275\b\357\277\275K\357\277\275\023\357\277\275.VM\357\277\275Q\357\277\275\061\035G\357\277\275\033\336\243\027\357\277\275OBQ\357\277\275\t\aJ\357\277\275@\357\277\275I\357\277\275"..., size=139516) at fts-backend-squat.c:166 ctx = 0x9ef10c8 #10 0xb74e358f in fts_backend_build_more (ctx=0x9ef10c8, data=0xb719e008 "\037\357\277\275\b\b?C\357\277\275L2,S\n\020H!\357\277\275\060 \314\203\357\277\275-!\026\341\222\215\357\277\275{\357\277\275~\357\277\275I\357\277\275R\357\277\275W\337\275U\357\277\275*\357\277\275$\032\005\036WIF=\025\037\031\357\277\275\067S\006\357\277\275FM\357\277\275\352\231\200\035\357\277\275\\\357\277\275\034\357\277\275\\#\357\277\275G:\357\277\275\070\357\277\275\017#\323\215R\357\277\275H#\357\277\275@\002\357\277\275~\357\277\275\065\357\277\275\b\357\277\275K\357\277\275\023\357\277\275.VM\357\277\275Q\357\277\275\061\035G\357\277\275\033\336\243\027\357\277\275OBQ\357\277\275\t\aJ\357\277\275@\357\277\275I\357\277\275"..., size=139516) at fts-api.c:124 No locals. #11 0xb74e676c in fts_build_mail_flush_headers (ctx=0x9ef0540, mail=0x9ef7db8, tryagain_r=0xbfd0f89f) at fts-storage.c:83 No locals. #12 fts_build_mail (ctx=0x9ef0540, mail=0x9ef7db8, tryagain_r=0xbfd0f89f) at fts-storage.c:240 decoder_flags = <value optimized out> parser = 0x0 decoder = 0x0 raw_block = {part = 0x9eba2e8, hdr = 0x0, data = 0x0, size = 0} prev_part = 0x9eba2e8 skip_body = false block = {part = 0x9eba2e8, hdr = 0x0, data = 0xa39c540 "", size = 188} ret = <value optimized out> input = 0xa398450 parts = 0x9eba2e8 body_part = true #13 fts_build_more (ctx=0x9ef0540, mail=0x9ef7db8, tryagain_r=0xbfd0f89f) at fts-storage.c:625 _data_stack_cur_id = 4 count = 3 ret = 166666528 #14 fts_mailbox_search_next_nonblock (ctx=0x9ef0540, mail=0x9ef7db8, tryagain_r=0xbfd0f89f) at fts-storage.c:728 fbox = 0x9eeba50 fctx = 0x9ef0630 ret = <value optimized out> #15 0xb770b9b8 in mailbox_search_next_nonblock (ctx=0x9ef0540, mail=0x9ef7db8, tryagain_r=0xbfd0f89f) at mail-storage.c:1182 box = <value optimized out> #16 0x0805cbe6 in cmd_search_more (cmd=0x9ee4048) at imap-search.c:347 ctx = 0x9ee4110 opts = SEARCH_RETURN_ALL sync_flags = <value optimized out> end_time = {tv_sec = -1217518400, tv_usec = -1076823880} range = <value optimized out> count = <value optimized out> id = <value optimized out> id_min = 0 id_max = 0 ok_reply = <value optimized out> time_msecs = <value optimized out> tryagain = <value optimized out> minmax = false lost_data = <value optimized out> __FUNCTION__ = "cmd_search_more" #17 0x0805d5c1 in imap_search_start (ctx=0x9ee4110, sargs=0x9eeea38, sort_program=0x0) at imap-search.c:551 cmd = 0x9ee4048 wanted_fields = 0 wanted_headers = <value optimized out> #18 0x0805376c in cmd_search (cmd=0x9ee4048) at cmd-search.c:45 ctx = 0x9ee4110 sargs = 0x9eeea38 args = 0x9ee6898 charset = 0x9ee6908 "ISO-8859-1" ret = <value optimized out> #19 0x08056abc in client_command_input (cmd=0x9ee4048) at imap-client.c:661 client = 0x9ee3be0 command = <value optimized out> __FUNCTION__ = "client_command_input" #20 0x08056b88 in client_command_input (cmd=0x9ee4048) at imap-client.c:711 client = 0x9ee3be0 command = <value optimized out> __FUNCTION__ = "client_command_input" #21 0x08056ddd in client_handle_next_command (client=0x9ee3be0) at imap-client.c:752 size = 61 #22 client_handle_input (client=0x9ee3be0) at imap-client.c:764 _data_stack_cur_id = 3 ret = false remove_io = false handled_commands = false __FUNCTION__ = "client_handle_input" #23 0x080576cf in client_input (client=0x9ee3be0) at imap-client.c:803 cmd = <value optimized out> output = 0x9ede9ec bytes = 61 __FUNCTION__ = "client_input" #24 0xb76bae81 in io_loop_call_io (io=0x9ee3fc8) at ioloop.c:384 ioloop = 0x9ec2368 t_id = 2 #25 0xb76bc0b3 in io_loop_handler_run (ioloop=0x9ec2368) at ioloop-epoll.c:213 ctx = 0x9ec2490 events = <value optimized out> event = 0x9ec24d0 list = 0x9ee3ff0 io = <value optimized out> tv = {tv_sec = 3, tv_usec = 935916} events_count = 166608880 msecs = 1 ret = 1 i = <value optimized out> j = <value optimized out> call = <value optimized out> #26 0xb76bae00 in io_loop_run (ioloop=0x9ec2368) at ioloop.c:405 No locals. #27 0xb76a68ea in master_service_run (service=0x9ec22b8, callback=0x805fc50 <client_connected>) at master-service.c:484 No locals. #28 0x08060395 in main (argc=1, argv=0x9ec21c0) at main.c:375 set_roots = {0x8062d00, 0x0} service_flags = <value optimized out> storage_service_flags = <value optimized out> postlogin_socket_path = <value optimized out> username = <value optimized out> c = <value optimized out> ----- End forwarded message ----- -- Ralf Hildebrandt Geschäftsbereich IT | Abteilung Netzwerk Charité - Universitätsmedizin Berlin Campus Benjamin Franklin Hindenburgdamm 30 | D-12203 Berlin Tel. +49 30 450 570 155 | Fax: +49 30 450 570 962 ralf.hildebrandt(a)charite.de | http://www.charite.de

2 4

[Dovecot] dovecot+shared folders
by Alexey Eropkin 11 May '11

11 May '11

Hi all. I have dovecot 1.2.15 on debian + mysql+shared folders. My config login_process_size = 128 login_processes_count = 10 login_process_per_connection = no login_max_connections = 3000 login_max_processes_count = 1000 mail_process_size = 1024 protocols = imap imaps pop3 pop3s managesieve protocol managesieve { login_executable = /usr/lib/dovecot/managesieve-login mail_executable = /usr/lib/dovecot/managesieve } disable_plaintext_auth = no log_timestamp = "%Y-%m-%d %H:%M:%S " mail_location = maildir:~ namespace private { separator = / prefix = inbox = yes hidden = no subscriptions = yes } namespace shared { separator = / prefix = shared/%%u/ location = maildir:%%h:INDEX=~/shared/%%u:CONTROL=~/shared/%%u inbox = no hidden = no subscriptions = no list = children } mail_privileged_group = vmail first_valid_uid = 500 last_valid_uid = 50000 first_valid_gid = 500 last_valid_gid = 50000 protocol imap { imap_client_workarounds = outlook-idle mail_plugins = acl imap_acl } protocol pop3 { pop3_uidl_format = %08Xu%08Xv } protocol managesieve { mail_location = mbox:~/ } protocol lda { postmaster_address = postmasterk(a)chronopay.ru mail_plugin_dir = /usr/lib/dovecot/modules/lda auth_socket_path = /var/run/dovecot/auth-master mail_plugins = acl sieve } auth default { mechanisms = plain login #digest-md5 cram-md5 passdb ldap { args = /etc/dovecot/dovecot-ldap.conf } passdb sql { args = /etc/dovecot/dovecot-sql.conf } #userdb ldap { # args = /etc/dovecot/dovecot-ldap.conf # } userdb static { args = uid=5000 gid=5000 home=/.mail/%d/%n } user = root socket listen { master { path = /var/run/dovecot/auth-master mode = 0660 user = vmail # User running Dovecot LDA group = vmail # Or alternatively mode 0660 + LDA user in this group } client { path = /var/spool/postfix/private/auth mode = 0660 user = postfix group = postfix } } } plugin { sieve = ~/.dovecot.sieve sieve_dir=~/sieve acl = vfile acl_shared_dict = file:/.mail/%d/shared-mailboxes.db } And all seems ok, but I cannot understand how to make delet flag per user. If I permit t and e in ACL, users delet message forever for all. -- Software is like sex, it is better when it's free

2 1

[Dovecot] LDAP Authentication ok but errors
by Héctor Moreno Blanco 11 May '11

11 May '11

Hello Timo, We have installed dovecot 2.0.10. With LDAP authentication. Users authenticate successfully but in the authentication process there are errors that I don't understand because it's everything all right: May 10 18:00:49 carpe3 dovecot: auth: Error: ldap_unbind May 10 18:00:49 carpe3 dovecot: auth: Error: ldap_free_connection 1 1 May 10 18:00:49 carpe3 dovecot: auth: Error: ldap_send_unbind May 10 18:00:49 carpe3 dovecot: auth: Error: ldap_free_connection: actually freed May 10 18:02:02 carpe3 dovecot: master: Dovecot v2.0.10 starting up (core dumps disabled) May 10 18:02:02 carpe3 dovecot: auth: Error: ldap_bind May 10 18:02:02 carpe3 dovecot: auth: Error: ldap_simple_bind May 10 18:02:02 carpe3 dovecot: auth: Error: ldap_sasl_bind May 10 18:02:02 carpe3 dovecot: auth: Error: ldap_send_initial_request May 10 18:02:02 carpe3 dovecot: auth: Error: ldap_new_connection 1 1 0 May 10 18:02:02 carpe3 dovecot: auth: Error: ldap_int_open_connection May 10 18:02:02 carpe3 dovecot: auth: Error: ldap_connect_to_host: TCP ldap_server:389 May 10 18:02:02 carpe3 dovecot: auth: Error: ldap_new_socket: 16 May 10 18:02:02 carpe3 dovecot: auth: Error: ldap_prepare_socket: 16 May 10 18:02:02 carpe3 dovecot: auth: Error: ldap_connect_to_host: Trying xxx.xxx.xxx.xxx:389 May 10 18:02:02 carpe3 dovecot: auth: Error: ldap_connect_timeout: fd: 16 tm: -1 async: 0 May 10 18:02:02 carpe3 dovecot: auth: Error: ldap_open_defconn: successful May 10 18:02:02 carpe3 dovecot: auth: Error: ldap_send_server_request May 10 18:02:02 carpe3 dovecot: auth: Error: ldap_result ld 0x1c8e6df0 msgid -1 May 10 18:02:02 carpe3 dovecot: auth: Error: ldap_chkResponseList ld 0x1c8e6df0 msgid -1 all 0 May 10 18:02:02 carpe3 dovecot: auth: Error: ldap_chkResponseList returns ld 0x1c8e6df0 NULL May 10 18:02:02 carpe3 dovecot: auth: Error: wait4msg ld 0x1c8e6df0 msgid -1 (timeout 0 usec) May 10 18:02:02 carpe3 dovecot: auth: Error: wait4msg continue ld 0x1c8e6df0 msgid -1 all 0 May 10 18:02:02 carpe3 dovecot: auth: Error: ** ld 0x1c8e6df0 Connections: May 10 18:02:02 carpe3 dovecot: auth: Error: * host: ldap_server port: 389 (default) May 10 18:02:02 carpe3 dovecot: auth: Error: refcnt: 2 status: Connected May 10 18:02:02 carpe3 dovecot: auth: Error: last used: Tue May 10 18:02:02 2011 May 10 18:02:02 carpe3 dovecot: auth: Error: May 10 18:02:02 carpe3 dovecot: auth: Error: ** ld 0x1c8e6df0 Outstanding Requests: May 10 18:02:02 carpe3 dovecot: auth: Error: * msgid 1, origid 1, status InProgress May 10 18:02:02 carpe3 dovecot: auth: Error: outstanding referrals 0, parent count 0 May 10 18:02:02 carpe3 dovecot: auth: Error: ** ld 0x1c8e6df0 Response Queue: May 10 18:02:02 carpe3 dovecot: auth: Error: Empty May 10 18:02:02 carpe3 dovecot: auth: Error: ldap_chkResponseList ld 0x1c8e6df0 msgid -1 all 0 May 10 18:02:02 carpe3 dovecot: auth: Error: ldap_chkResponseList returns ld 0x1c8e6df0 NULL May 10 18:02:02 carpe3 dovecot: auth: Error: ldap_int_select May 10 18:02:02 carpe3 dovecot: auth: Error: read1msg: ld 0x1c8e6df0 msgid -1 all 0 May 10 18:02:02 carpe3 dovecot: auth: Error: read1msg: ld 0x1c8e6df0 msgid 1 message type bind May 10 18:02:02 carpe3 dovecot: auth: Error: new result: res_errno: 0, res_error: <>, res_matched: <> May 10 18:02:02 carpe3 dovecot: auth: Error: read1msg: ld 0x1c8e6df0 0 new referrals May 10 18:02:02 carpe3 dovecot: auth: Error: read1msg: mark request completed, ld 0x1c8e6df0 msgid 1 May 10 18:02:02 carpe3 dovecot: auth: Error: request done: ld 0x1c8e6df0 msgid 1 May 10 18:02:02 carpe3 dovecot: auth: Error: res_errno: 0, res_error: <>, res_matched: <> May 10 18:02:02 carpe3 dovecot: auth: Error: ldap_free_request (origid 1, msgid 1) May 10 18:02:02 carpe3 dovecot: auth: Error: ldap_free_connection 0 1 May 10 18:02:02 carpe3 dovecot: auth: Error: ldap_free_connection: refcnt 1 May 10 18:02:02 carpe3 dovecot: auth: Error: ldap_parse_result May 10 18:02:02 carpe3 dovecot: auth: Error: ldap_msgfree May 10 18:02:02 carpe3 dovecot: auth: Error: ldap_result ld 0x1c8e6df0 msgid -1 May 10 18:02:02 carpe3 dovecot: auth: Error: ldap_chkResponseList ld 0x1c8e6df0 msgid -1 all 0 May 10 18:02:02 carpe3 dovecot: auth: Error: ldap_chkResponseList returns ld 0x1c8e6df0 NULL May 10 18:02:02 carpe3 dovecot: auth: Error: wait4msg ld 0x1c8e6df0 msgid -1 (timeout 0 usec) May 10 18:02:02 carpe3 dovecot: auth: Error: wait4msg continue ld 0x1c8e6df0 msgid -1 all 0 May 10 18:02:02 carpe3 dovecot: auth: Error: ** ld 0x1c8e6df0 Connections: May 10 18:02:02 carpe3 dovecot: auth: Error: * host: ldap_server port: 389 (default) May 10 18:02:02 carpe3 dovecot: auth: Error: refcnt: 1 status: Connected May 10 18:02:02 carpe3 dovecot: auth: Error: last used: Tue May 10 18:02:02 2011 May 10 18:02:02 carpe3 dovecot: auth: Error: May 10 18:02:02 carpe3 dovecot: auth: Error: ** ld 0x1c8e6df0 Outstanding Requests: May 10 18:02:02 carpe3 dovecot: auth: Error: Empty May 10 18:02:02 carpe3 dovecot: auth: Error: ** ld 0x1c8e6df0 Response Queue: May 10 18:02:02 carpe3 dovecot: auth: Error: Empty May 10 18:02:02 carpe3 dovecot: auth: Error: ldap_chkResponseList ld 0x1c8e6df0 msgid -1 all 0 May 10 18:02:02 carpe3 dovecot: auth: Error: ldap_chkResponseList returns ld 0x1c8e6df0 NULL May 10 18:02:02 carpe3 dovecot: auth: Error: ldap_int_select May 10 18:02:13 carpe3 dovecot: auth: Error: ldap_search May 10 18:02:13 carpe3 dovecot: auth: Error: put_filter: "(&(objectClass=qmailUser)(uid=USERID)(accountActive=TRUE))" May 10 18:02:13 carpe3 dovecot: auth: Error: put_filter: AND May 10 18:02:13 carpe3 dovecot: auth: Error: put_filter_list "(objectClass=qmailUser)(uid=USERID)(accountActive=TRUE)" May 10 18:02:13 carpe3 dovecot: auth: Error: put_filter: "(objectClass=qmailUser)" May 10 18:02:13 carpe3 dovecot: auth: Error: put_filter: simple May 10 18:02:13 carpe3 dovecot: auth: Error: put_simple_filter: "objectClass=qmailUser" May 10 18:02:13 carpe3 dovecot: auth: Error: put_filter: "(uid=USERID)" May 10 18:02:13 carpe3 dovecot: auth: Error: put_filter: simple May 10 18:02:13 carpe3 dovecot: auth: Error: put_simple_filter: "uid= USERID " May 10 18:02:13 carpe3 dovecot: auth: Error: put_filter: "(accountActive=TRUE)" May 10 18:02:13 carpe3 dovecot: auth: Error: put_filter: simple May 10 18:02:13 carpe3 dovecot: auth: Error: put_simple_filter: "accountActive=TRUE" May 10 18:02:13 carpe3 dovecot: auth: Error: ldap_build_search_req ATTRS: May 10 18:02:13 carpe3 dovecot: auth: Error: uid May 10 18:02:13 carpe3 dovecot: auth: Error: mailMessageStore May 10 18:02:13 carpe3 dovecot: auth: Error: mailQuotaSize May 10 18:02:13 carpe3 dovecot: auth: Error: ldap_send_initial_request May 10 18:02:13 carpe3 dovecot: auth: Error: ldap_send_server_request May 10 18:02:13 carpe3 dovecot: auth: Error: ldap_result ld 0x1c8e6df0 msgid -1 May 10 18:02:13 carpe3 dovecot: auth: Error: ldap_chkResponseList ld 0x1c8e6df0 msgid -1 all 0 May 10 18:02:13 carpe3 dovecot: auth: Error: ldap_chkResponseList returns ld 0x1c8e6df0 NULL May 10 18:02:13 carpe3 dovecot: auth: Error: wait4msg ld 0x1c8e6df0 msgid -1 (timeout 0 usec) May 10 18:02:13 carpe3 dovecot: auth: Error: wait4msg continue ld 0x1c8e6df0 msgid -1 all 0 May 10 18:02:13 carpe3 dovecot: auth: Error: ** ld 0x1c8e6df0 Connections: May 10 18:02:13 carpe3 dovecot: auth: Error: * host: ldap_server port: 389 (default) May 10 18:02:13 carpe3 dovecot: auth: Error: refcnt: 2 status: Connected May 10 18:02:13 carpe3 dovecot: auth: Error: last used: Tue May 10 18:02:13 2011 May 10 18:02:13 carpe3 dovecot: auth: Error: May 10 18:02:13 carpe3 dovecot: auth: Error: ** ld 0x1c8e6df0 Outstanding Requests: May 10 18:02:13 carpe3 dovecot: auth: Error: * msgid 2, origid 2, status InProgress May 10 18:02:13 carpe3 dovecot: auth: Error: outstanding referrals 0, parent count 0 May 10 18:02:13 carpe3 dovecot: auth: Error: ** ld 0x1c8e6df0 Response Queue: May 10 18:02:13 carpe3 dovecot: auth: Error: Empty May 10 18:02:13 carpe3 dovecot: auth: Error: ldap_chkResponseList ld 0x1c8e6df0 msgid -1 all 0 May 10 18:02:13 carpe3 dovecot: auth: Error: ldap_chkResponseList returns ld 0x1c8e6df0 NULL May 10 18:02:13 carpe3 dovecot: auth: Error: ldap_int_select May 10 18:02:13 carpe3 dovecot: auth: Error: read1msg: ld 0x1c8e6df0 msgid -1 all 0 May 10 18:02:13 carpe3 dovecot: auth: Error: read1msg: ld 0x1c8e6df0 msgid 2 message type search-entry May 10 18:02:13 carpe3 dovecot: auth: Error: ldap_first_attribute May 10 18:02:13 carpe3 dovecot: auth: Error: ldap_get_values May 10 18:02:13 carpe3 dovecot: auth: Error: ldap_next_attribute May 10 18:02:13 carpe3 dovecot: auth: Error: ldap_get_values May 10 18:02:13 carpe3 dovecot: auth: Error: ldap_next_attribute May 10 18:02:13 carpe3 dovecot: auth: Error: ldap_get_values May 10 18:02:13 carpe3 dovecot: auth: Error: ldap_next_attribute May 10 18:02:13 carpe3 dovecot: auth: Error: ldap_get_dn May 10 18:02:13 carpe3 dovecot: auth: Error: ldap_msgfree May 10 18:02:13 carpe3 dovecot: auth: Error: ldap_result ld 0x1c8e6df0 msgid -1 May 10 18:02:13 carpe3 dovecot: auth: Error: ldap_chkResponseList ld 0x1c8e6df0 msgid -1 all 0 May 10 18:02:13 carpe3 dovecot: auth: Error: ldap_chkResponseList returns ld 0x1c8e6df0 NULL May 10 18:02:13 carpe3 dovecot: auth: Error: wait4msg ld 0x1c8e6df0 msgid -1 (timeout 0 usec) May 10 18:02:13 carpe3 dovecot: auth: Error: wait4msg continue ld 0x1c8e6df0 msgid -1 all 0 May 10 18:02:13 carpe3 dovecot: auth: Error: ** ld 0x1c8e6df0 Connections: May 10 18:02:13 carpe3 dovecot: auth: Error: * host: ldap_server port: 389 (default) May 10 18:02:13 carpe3 dovecot: auth: Error: refcnt: 2 status: Connected May 10 18:02:13 carpe3 dovecot: auth: Error: last used: Tue May 10 18:02:13 2011 May 10 18:02:13 carpe3 dovecot: auth: Error: May 10 18:02:13 carpe3 dovecot: auth: Error: ** ld 0x1c8e6df0 Outstanding Requests: May 10 18:02:13 carpe3 dovecot: auth: Error: * msgid 2, origid 2, status InProgress May 10 18:02:13 carpe3 dovecot: auth: Error: outstanding referrals 0, parent count 0 May 10 18:02:13 carpe3 dovecot: auth: Error: ** ld 0x1c8e6df0 Response Queue: May 10 18:02:13 carpe3 dovecot: auth: Error: Empty May 10 18:02:13 carpe3 dovecot: auth: Error: ldap_chkResponseList ld 0x1c8e6df0 msgid -1 all 0 May 10 18:02:13 carpe3 dovecot: auth: Error: ldap_chkResponseList returns ld 0x1c8e6df0 NULL May 10 18:02:13 carpe3 dovecot: auth: Error: ldap_int_select May 10 18:02:13 carpe3 dovecot: auth: Error: read1msg: ld 0x1c8e6df0 msgid -1 all 0 May 10 18:02:13 carpe3 dovecot: auth: Error: read1msg: ld 0x1c8e6df0 msgid 2 message type search-result May 10 18:02:13 carpe3 dovecot: auth: Error: new result: res_errno: 0, res_error: <>, res_matched: <> May 10 18:02:13 carpe3 dovecot: auth: Error: read1msg: ld 0x1c8e6df0 0 new referrals May 10 18:02:13 carpe3 dovecot: auth: Error: read1msg: mark request completed, ld 0x1c8e6df0 msgid 2 May 10 18:02:13 carpe3 dovecot: auth: Error: request done: ld 0x1c8e6df0 msgid 2 May 10 18:02:13 carpe3 dovecot: auth: Error: res_errno: 0, res_error: <>, res_matched: <> May 10 18:02:13 carpe3 dovecot: auth: Error: ldap_free_request (origid 2, msgid 2) May 10 18:02:13 carpe3 dovecot: auth: Error: ldap_free_connection 0 1 May 10 18:02:13 carpe3 dovecot: auth: Error: ldap_free_connection: refcnt 1 May 10 18:02:13 carpe3 dovecot: auth: Error: ldap_parse_result May 10 18:02:13 carpe3 dovecot: auth: Error: ldap_bind May 10 18:02:13 carpe3 dovecot: auth: Error: ldap_simple_bind May 10 18:02:13 carpe3 dovecot: auth: Error: ldap_sasl_bind May 10 18:02:13 carpe3 dovecot: auth: Error: ldap_send_initial_request May 10 18:02:13 carpe3 dovecot: auth: Error: ldap_send_server_request May 10 18:02:13 carpe3 dovecot: auth: Error: ldap_msgfree May 10 18:02:13 carpe3 dovecot: auth: Error: ldap_result ld 0x1c8e6df0 msgid -1 May 10 18:02:13 carpe3 dovecot: auth: Error: ldap_chkResponseList ld 0x1c8e6df0 msgid -1 all 0 May 10 18:02:13 carpe3 dovecot: auth: Error: ldap_chkResponseList returns ld 0x1c8e6df0 NULL May 10 18:02:13 carpe3 dovecot: auth: Error: wait4msg ld 0x1c8e6df0 msgid -1 (timeout 0 usec) May 10 18:02:13 carpe3 dovecot: auth: Error: wait4msg continue ld 0x1c8e6df0 msgid -1 all 0 May 10 18:02:13 carpe3 dovecot: auth: Error: ** ld 0x1c8e6df0 Connections: May 10 18:02:13 carpe3 dovecot: auth: Error: * host: ldap_server port: 389 (default) May 10 18:02:13 carpe3 dovecot: auth: Error: refcnt: 2 status: Connected May 10 18:02:13 carpe3 dovecot: auth: Error: last used: Tue May 10 18:02:13 2011 May 10 18:02:13 carpe3 dovecot: auth: Error: May 10 18:02:13 carpe3 dovecot: auth: Error: ** ld 0x1c8e6df0 Outstanding Requests: May 10 18:02:13 carpe3 dovecot: auth: Error: * msgid 3, origid 3, status InProgress May 10 18:02:13 carpe3 dovecot: auth: Error: outstanding referrals 0, parent count 0 May 10 18:02:13 carpe3 dovecot: auth: Error: ** ld 0x1c8e6df0 Response Queue: May 10 18:02:13 carpe3 dovecot: auth: Error: Empty May 10 18:02:13 carpe3 dovecot: auth: Error: ldap_chkResponseList ld 0x1c8e6df0 msgid -1 all 0 May 10 18:02:13 carpe3 dovecot: auth: Error: ldap_chkResponseList returns ld 0x1c8e6df0 NULL May 10 18:02:13 carpe3 dovecot: auth: Error: ldap_int_select May 10 18:02:13 carpe3 dovecot: auth: Error: ldap_result ld 0x1c8e6df0 msgid -1 May 10 18:02:13 carpe3 dovecot: auth: Error: ldap_chkResponseList ld 0x1c8e6df0 msgid -1 all 0 May 10 18:02:13 carpe3 dovecot: auth: Error: ldap_chkResponseList returns ld 0x1c8e6df0 NULL May 10 18:02:13 carpe3 dovecot: auth: Error: wait4msg ld 0x1c8e6df0 msgid -1 (timeout 0 usec) May 10 18:02:13 carpe3 dovecot: auth: Error: wait4msg continue ld 0x1c8e6df0 msgid -1 all 0 May 10 18:02:13 carpe3 dovecot: auth: Error: ** ld 0x1c8e6df0 Connections: May 10 18:02:13 carpe3 dovecot: auth: Error: * host: ldap_server port: 389 (default) May 10 18:02:13 carpe3 dovecot: auth: Error: refcnt: 2 status: Connected May 10 18:02:13 carpe3 dovecot: auth: Error: last used: Tue May 10 18:02:13 2011 May 10 18:02:13 carpe3 dovecot: auth: Error: May 10 18:02:13 carpe3 dovecot: auth: Error: ** ld 0x1c8e6df0 Outstanding Requests: May 10 18:02:13 carpe3 dovecot: auth: Error: * msgid 3, origid 3, status InProgress May 10 18:02:13 carpe3 dovecot: auth: Error: outstanding referrals 0, parent count 0 May 10 18:02:13 carpe3 dovecot: auth: Error: ** ld 0x1c8e6df0 Response Queue: May 10 18:02:13 carpe3 dovecot: auth: Error: Empty May 10 18:02:13 carpe3 dovecot: auth: Error: ldap_chkResponseList ld 0x1c8e6df0 msgid -1 all 0 May 10 18:02:13 carpe3 dovecot: auth: Error: ldap_chkResponseList returns ld 0x1c8e6df0 NULL May 10 18:02:13 carpe3 dovecot: auth: Error: ldap_int_select May 10 18:02:13 carpe3 dovecot: auth: Error: read1msg: ld 0x1c8e6df0 msgid -1 all 0 May 10 18:02:13 carpe3 dovecot: auth: Error: read1msg: ld 0x1c8e6df0 msgid 3 message type bind May 10 18:02:13 carpe3 dovecot: auth: Error: new result: res_errno: 0, res_error: <>, res_matched: <> May 10 18:02:13 carpe3 dovecot: auth: Error: read1msg: ld 0x1c8e6df0 0 new referrals May 10 18:02:13 carpe3 dovecot: auth: Error: read1msg: mark request completed, ld 0x1c8e6df0 msgid 3 May 10 18:02:13 carpe3 dovecot: auth: Error: request done: ld 0x1c8e6df0 msgid 3 May 10 18:02:13 carpe3 dovecot: auth: Error: res_errno: 0, res_error: <>, res_matched: <> May 10 18:02:13 carpe3 dovecot: auth: Error: ldap_free_request (origid 3, msgid 3) May 10 18:02:13 carpe3 dovecot: auth: Error: ldap_free_connection 0 1 May 10 18:02:13 carpe3 dovecot: auth: Error: ldap_free_connection: refcnt 1 May 10 18:02:13 carpe3 dovecot: auth: Error: ldap_parse_result May 10 18:02:13 carpe3 dovecot: auth: Error: ldap_parse_result May 10 18:02:13 carpe3 dovecot: auth: Error: ldap_msgfree May 10 18:02:13 carpe3 dovecot: auth: Error: ldap_result ld 0x1c8e6df0 msgid -1 May 10 18:02:13 carpe3 dovecot: auth: Error: ldap_chkResponseList ld 0x1c8e6df0 msgid -1 all 0 May 10 18:02:13 carpe3 dovecot: auth: Error: ldap_chkResponseList returns ld 0x1c8e6df0 NULL May 10 18:02:13 carpe3 dovecot: auth: Error: wait4msg ld 0x1c8e6df0 msgid -1 (timeout 0 usec) May 10 18:02:13 carpe3 dovecot: auth: Error: wait4msg continue ld 0x1c8e6df0 msgid -1 all 0 May 10 18:02:13 carpe3 dovecot: auth: Error: ** ld 0x1c8e6df0 Connections: May 10 18:02:13 carpe3 dovecot: auth: Error: * host: ldap_server port: 389 (default) May 10 18:02:13 carpe3 dovecot: auth: Error: refcnt: 1 status: Connected May 10 18:02:13 carpe3 dovecot: auth: Error: last used: Tue May 10 18:02:13 2011 May 10 18:02:13 carpe3 dovecot: auth: Error: May 10 18:02:13 carpe3 dovecot: auth: Error: ** ld 0x1c8e6df0 Outstanding Requests: May 10 18:02:13 carpe3 dovecot: auth: Error: Empty May 10 18:02:13 carpe3 dovecot: auth: Error: ** ld 0x1c8e6df0 Response Queue: May 10 18:02:13 carpe3 dovecot: auth: Error: Empty May 10 18:02:13 carpe3 dovecot: auth: Error: ldap_chkResponseList ld 0x1c8e6df0 msgid -1 all 0 May 10 18:02:13 carpe3 dovecot: auth: Error: ldap_chkResponseList returns ld 0x1c8e6df0 NULL May 10 18:02:13 carpe3 dovecot: auth: Error: ldap_int_select May 10 18:02:13 carpe3 dovecot: auth: Error: ldap_bind May 10 18:02:13 carpe3 dovecot: auth: Error: ldap_simple_bind May 10 18:02:13 carpe3 dovecot: auth: Error: ldap_sasl_bind May 10 18:02:13 carpe3 dovecot: auth: Error: ldap_send_initial_request May 10 18:02:13 carpe3 dovecot: auth: Error: ldap_send_server_request May 10 18:02:13 carpe3 dovecot: auth: Error: ldap_result ld 0x1c8e6df0 msgid -1 May 10 18:02:13 carpe3 dovecot: auth: Error: ldap_chkResponseList ld 0x1c8e6df0 msgid -1 all 0 May 10 18:02:13 carpe3 dovecot: auth: Error: ldap_chkResponseList returns ld 0x1c8e6df0 NULL May 10 18:02:13 carpe3 dovecot: auth: Error: wait4msg ld 0x1c8e6df0 msgid -1 (timeout 0 usec) May 10 18:02:13 carpe3 dovecot: auth: Error: wait4msg continue ld 0x1c8e6df0 msgid -1 all 0 May 10 18:02:13 carpe3 dovecot: auth: Error: ** ld 0x1c8e6df0 Connections: May 10 18:02:13 carpe3 dovecot: auth: Error: * host: ldap_server port: 389 (default) May 10 18:02:13 carpe3 dovecot: auth: Error: refcnt: 2 status: Connected May 10 18:02:13 carpe3 dovecot: auth: Error: last used: Tue May 10 18:02:13 2011 May 10 18:02:13 carpe3 dovecot: auth: Error: May 10 18:02:13 carpe3 dovecot: auth: Error: ** ld 0x1c8e6df0 Outstanding Requests: May 10 18:02:13 carpe3 dovecot: auth: Error: * msgid 4, origid 4, status InProgress May 10 18:02:13 carpe3 dovecot: auth: Error: outstanding referrals 0, parent count 0 May 10 18:02:13 carpe3 dovecot: auth: Error: ** ld 0x1c8e6df0 Response Queue: May 10 18:02:13 carpe3 dovecot: auth: Error: Empty May 10 18:02:13 carpe3 dovecot: auth: Error: ldap_chkResponseList ld 0x1c8e6df0 msgid -1 all 0 May 10 18:02:13 carpe3 dovecot: auth: Error: ldap_chkResponseList returns ld 0x1c8e6df0 NULL May 10 18:02:13 carpe3 dovecot: auth: Error: ldap_int_select May 10 18:02:13 carpe3 dovecot: auth: Error: read1msg: ld 0x1c8e6df0 msgid -1 all 0 May 10 18:02:13 carpe3 dovecot: auth: Error: read1msg: ld 0x1c8e6df0 msgid 4 message type bind May 10 18:02:13 carpe3 dovecot: auth: Error: new result: res_errno: 0, res_error: <>, res_matched: <> May 10 18:02:13 carpe3 dovecot: auth: Error: read1msg: ld 0x1c8e6df0 0 new referrals May 10 18:02:13 carpe3 dovecot: auth: Error: read1msg: mark request completed, ld 0x1c8e6df0 msgid 4 May 10 18:02:13 carpe3 dovecot: auth: Error: request done: ld 0x1c8e6df0 msgid 4 May 10 18:02:13 carpe3 dovecot: auth: Error: res_errno: 0, res_error: <>, res_matched: <> May 10 18:02:13 carpe3 dovecot: auth: Error: ldap_free_request (origid 4, msgid 4) May 10 18:02:13 carpe3 dovecot: auth: Error: ldap_free_connection 0 1 May 10 18:02:13 carpe3 dovecot: auth: Error: ldap_free_connection: refcnt 1 May 10 18:02:13 carpe3 dovecot: auth: Error: ldap_parse_result May 10 18:02:13 carpe3 dovecot: auth: Error: ldap_search May 10 18:02:13 carpe3 dovecot: auth: Error: put_filter: "(&(objectClass=qmailUser)(|(mailAlternateAddress= USERID)(mail= USERID)(uid= USERID))(accountActive=TRUE))" May 10 18:02:13 carpe3 dovecot: auth: Error: put_filter: AND May 10 18:02:13 carpe3 dovecot: auth: Error: put_filter_list "(objectClass=qmailUser)(|(mailAlternateAddress= USERID)(mail= USERID)(uid= USERID))(accountActive=TRUE)" May 10 18:02:13 carpe3 dovecot: auth: Error: put_filter: "(objectClass=qmailUser)" May 10 18:02:13 carpe3 dovecot: auth: Error: put_filter: simple May 10 18:02:13 carpe3 dovecot: auth: Error: put_simple_filter: "objectClass=qmailUser" May 10 18:02:13 carpe3 dovecot: auth: Error: put_filter: "(|(mailAlternateAddress= USERID)(mail= USERID)(uid= USERID))" May 10 18:02:13 carpe3 dovecot: auth: Error: put_filter: OR May 10 18:02:13 carpe3 dovecot: auth: Error: put_filter_list "(mailAlternateAddress= USERID)(mail= USERID)(uid= USERID)" May 10 18:02:13 carpe3 dovecot: auth: Error: put_filter: "(mailAlternateAddress= USERID)" May 10 18:02:13 carpe3 dovecot: auth: Error: put_filter: simple May 10 18:02:13 carpe3 dovecot: auth: Error: put_simple_filter: "mailAlternateAddress= USERID " May 10 18:02:13 carpe3 dovecot: auth: Error: put_filter: "(mail= USERID)" May 10 18:02:13 carpe3 dovecot: auth: Error: put_filter: simple May 10 18:02:13 carpe3 dovecot: auth: Error: put_simple_filter: "mail= USERID " May 10 18:02:13 carpe3 dovecot: auth: Error: put_filter: "(uid= USERID)" May 10 18:02:13 carpe3 dovecot: auth: Error: put_filter: simple May 10 18:02:13 carpe3 dovecot: auth: Error: put_simple_filter: "uid= USERID " May 10 18:02:13 carpe3 dovecot: auth: Error: put_filter: "(accountActive=TRUE)" May 10 18:02:13 carpe3 dovecot: auth: Error: put_filter: simple May 10 18:02:13 carpe3 dovecot: auth: Error: put_simple_filter: "accountActive=TRUE" May 10 18:02:13 carpe3 dovecot: auth: Error: ldap_build_search_req ATTRS: May 10 18:02:13 carpe3 dovecot: auth: Error: mailMessageStore May 10 18:02:13 carpe3 dovecot: auth: Error: mailQuotaSize May 10 18:02:13 carpe3 dovecot: auth: Error: ldap_send_initial_request May 10 18:02:13 carpe3 dovecot: auth: Error: ldap_send_server_request May 10 18:02:13 carpe3 dovecot: auth: Error: ldap_msgfree May 10 18:02:13 carpe3 dovecot: auth: Error: ldap_result ld 0x1c8e6df0 msgid -1 May 10 18:02:13 carpe3 dovecot: auth: Error: ldap_chkResponseList ld 0x1c8e6df0 msgid -1 all 0 May 10 18:02:13 carpe3 dovecot: auth: Error: ldap_chkResponseList returns ld 0x1c8e6df0 NULL May 10 18:02:13 carpe3 dovecot: auth: Error: wait4msg ld 0x1c8e6df0 msgid -1 (timeout 0 usec) May 10 18:02:13 carpe3 dovecot: auth: Error: wait4msg continue ld 0x1c8e6df0 msgid -1 all 0 May 10 18:02:13 carpe3 dovecot: auth: Error: ** ld 0x1c8e6df0 Connections: May 10 18:02:13 carpe3 dovecot: auth: Error: * host: ldap_server port: 389 (default) May 10 18:02:13 carpe3 dovecot: auth: Error: refcnt: 2 status: Connected May 10 18:02:13 carpe3 dovecot: auth: Error: last used: Tue May 10 18:02:13 2011 May 10 18:02:13 carpe3 dovecot: auth: Error: May 10 18:02:13 carpe3 dovecot: auth: Error: ** ld 0x1c8e6df0 Outstanding Requests: May 10 18:02:13 carpe3 dovecot: auth: Error: * msgid 5, origid 5, status InProgress May 10 18:02:13 carpe3 dovecot: auth: Error: outstanding referrals 0, parent count 0 May 10 18:02:13 carpe3 dovecot: auth: Error: ** ld 0x1c8e6df0 Response Queue: May 10 18:02:13 carpe3 dovecot: auth: Error: Empty May 10 18:02:13 carpe3 dovecot: auth: Error: ldap_chkResponseList ld 0x1c8e6df0 msgid -1 all 0 May 10 18:02:13 carpe3 dovecot: auth: Error: ldap_chkResponseList returns ld 0x1c8e6df0 NULL May 10 18:02:13 carpe3 dovecot: auth: Error: ldap_int_select May 10 18:02:13 carpe3 dovecot: auth: Error: ldap_result ld 0x1c8e6df0 msgid -1 May 10 18:02:13 carpe3 dovecot: auth: Error: ldap_chkResponseList ld 0x1c8e6df0 msgid -1 all 0 May 10 18:02:13 carpe3 dovecot: auth: Error: ldap_chkResponseList returns ld 0x1c8e6df0 NULL May 10 18:02:13 carpe3 dovecot: auth: Error: wait4msg ld 0x1c8e6df0 msgid -1 (timeout 0 usec) May 10 18:02:13 carpe3 dovecot: auth: Error: wait4msg continue ld 0x1c8e6df0 msgid -1 all 0 May 10 18:02:13 carpe3 dovecot: auth: Error: ** ld 0x1c8e6df0 Connections: May 10 18:02:13 carpe3 dovecot: auth: Error: * host: ldap_server port: 389 (default) May 10 18:02:13 carpe3 dovecot: auth: Error: refcnt: 2 status: Connected May 10 18:02:13 carpe3 dovecot: auth: Error: last used: Tue May 10 18:02:13 2011 May 10 18:02:13 carpe3 dovecot: auth: Error: May 10 18:02:13 carpe3 dovecot: auth: Error: ** ld 0x1c8e6df0 Outstanding Requests: May 10 18:02:13 carpe3 dovecot: auth: Error: * msgid 5, origid 5, status InProgress May 10 18:02:13 carpe3 dovecot: auth: Error: outstanding referrals 0, parent count 0 May 10 18:02:13 carpe3 dovecot: auth: Error: ** ld 0x1c8e6df0 Response Queue: May 10 18:02:13 carpe3 dovecot: auth: Error: Empty May 10 18:02:13 carpe3 dovecot: auth: Error: ldap_chkResponseList ld 0x1c8e6df0 msgid -1 all 0 May 10 18:02:13 carpe3 dovecot: auth: Error: ldap_chkResponseList returns ld 0x1c8e6df0 NULL May 10 18:02:13 carpe3 dovecot: auth: Error: ldap_int_select May 10 18:02:13 carpe3 dovecot: auth: Error: read1msg: ld 0x1c8e6df0 msgid -1 all 0 May 10 18:02:13 carpe3 dovecot: auth: Error: read1msg: ld 0x1c8e6df0 msgid 5 message type search-entry May 10 18:02:13 carpe3 dovecot: auth: Error: ldap_first_attribute May 10 18:02:13 carpe3 dovecot: auth: Error: ldap_get_values May 10 18:02:13 carpe3 dovecot: auth: Error: ldap_next_attribute May 10 18:02:13 carpe3 dovecot: auth: Error: ldap_get_values May 10 18:02:13 carpe3 dovecot: auth: Error: ldap_next_attribute May 10 18:02:13 carpe3 dovecot: auth: Error: ldap_msgfree May 10 18:02:13 carpe3 dovecot: auth: Error: ldap_result ld 0x1c8e6df0 msgid -1 May 10 18:02:13 carpe3 dovecot: auth: Error: ldap_chkResponseList ld 0x1c8e6df0 msgid -1 all 0 May 10 18:02:13 carpe3 dovecot: auth: Error: ldap_chkResponseList returns ld 0x1c8e6df0 NULL May 10 18:02:13 carpe3 dovecot: auth: Error: wait4msg ld 0x1c8e6df0 msgid -1 (timeout 0 usec) May 10 18:02:13 carpe3 dovecot: auth: Error: wait4msg continue ld 0x1c8e6df0 msgid -1 all 0 May 10 18:02:13 carpe3 dovecot: auth: Error: ** ld 0x1c8e6df0 Connections: May 10 18:02:13 carpe3 dovecot: auth: Error: * host: ldap_server port: 389 (default) May 10 18:02:13 carpe3 dovecot: auth: Error: refcnt: 2 status: Connected May 10 18:02:13 carpe3 dovecot: auth: Error: last used: Tue May 10 18:02:13 2011 May 10 18:02:13 carpe3 dovecot: auth: Error: May 10 18:02:13 carpe3 dovecot: auth: Error: ** ld 0x1c8e6df0 Outstanding Requests: May 10 18:02:13 carpe3 dovecot: auth: Error: * msgid 5, origid 5, status InProgress May 10 18:02:13 carpe3 dovecot: auth: Error: outstanding referrals 0, parent count 0 May 10 18:02:13 carpe3 dovecot: auth: Error: ** ld 0x1c8e6df0 Response Queue: May 10 18:02:13 carpe3 dovecot: auth: Error: Empty May 10 18:02:13 carpe3 dovecot: auth: Error: ldap_chkResponseList ld 0x1c8e6df0 msgid -1 all 0 May 10 18:02:13 carpe3 dovecot: auth: Error: ldap_chkResponseList returns ld 0x1c8e6df0 NULL May 10 18:02:13 carpe3 dovecot: auth: Error: ldap_int_select May 10 18:02:13 carpe3 dovecot: auth: Error: read1msg: ld 0x1c8e6df0 msgid -1 all 0 May 10 18:02:13 carpe3 dovecot: auth: Error: read1msg: ld 0x1c8e6df0 msgid 5 message type search-result May 10 18:02:13 carpe3 dovecot: auth: Error: new result: res_errno: 0, res_error: <>, res_matched: <> May 10 18:02:13 carpe3 dovecot: auth: Error: read1msg: ld 0x1c8e6df0 0 new referrals May 10 18:02:13 carpe3 dovecot: auth: Error: read1msg: mark request completed, ld 0x1c8e6df0 msgid 5 May 10 18:02:13 carpe3 dovecot: auth: Error: request done: ld 0x1c8e6df0 msgid 5 May 10 18:02:13 carpe3 dovecot: auth: Error: res_errno: 0, res_error: <>, res_matched: <> May 10 18:02:13 carpe3 dovecot: auth: Error: ldap_free_request (origid 5, msgid 5) May 10 18:02:13 carpe3 dovecot: auth: Error: ldap_free_connection 0 1 May 10 18:02:13 carpe3 dovecot: auth: Error: ldap_free_connection: refcnt 1 May 10 18:02:13 carpe3 dovecot: auth: Error: ldap_parse_result May 10 18:02:13 carpe3 dovecot: auth: Error: ldap_msgfree May 10 18:02:13 carpe3 dovecot: auth: Error: ldap_result ld 0x1c8e6df0 msgid -1 May 10 18:02:13 carpe3 dovecot: auth: Error: ldap_chkResponseList ld 0x1c8e6df0 msgid -1 all 0 May 10 18:02:13 carpe3 dovecot: auth: Error: ldap_chkResponseList returns ld 0x1c8e6df0 NULL May 10 18:02:13 carpe3 dovecot: auth: Error: wait4msg ld 0x1c8e6df0 msgid -1 (timeout 0 usec) May 10 18:02:13 carpe3 dovecot: auth: Error: wait4msg continue ld 0x1c8e6df0 msgid -1 all 0 May 10 18:02:13 carpe3 dovecot: auth: Error: ** ld 0x1c8e6df0 Connections: May 10 18:02:13 carpe3 dovecot: auth: Error: * host: ldap_server port: 389 (default) May 10 18:02:13 carpe3 dovecot: auth: Error: refcnt: 1 status: Connected May 10 18:02:13 carpe3 dovecot: auth: Error: last used: Tue May 10 18:02:13 2011 May 10 18:02:13 carpe3 dovecot: auth: Error: May 10 18:02:13 carpe3 dovecot: auth: Error: ** ld 0x1c8e6df0 Outstanding Requests: May 10 18:02:13 carpe3 dovecot: auth: Error: Empty May 10 18:02:13 carpe3 dovecot: auth: Error: ** ld 0x1c8e6df0 Response Queue: May 10 18:02:13 carpe3 dovecot: auth: Error: Empty May 10 18:02:13 carpe3 dovecot: auth: Error: ldap_chkResponseList ld 0x1c8e6df0 msgid -1 all 0 May 10 18:02:13 carpe3 dovecot: auth: Error: ldap_chkResponseList returns ld 0x1c8e6df0 NULL May 10 18:02:13 carpe3 dovecot: auth: Error: ldap_int_select May 10 18:02:13 carpe3 dovecot: imap-login: Login: user=< USERID >, method=PLAIN, rip=127.0.0.1, lip=127.0.0.1, mpid=11362, secured May 10 18:02:25 carpe3 dovecot: imap(USERID): Disconnected: Logged out bytes=29/655 Here is my dovecot -n output: # OS: Linux 2.6.18-128.1.1.el5 x86_64 Scientific Linux SL release 5.2 (Boron) auth_cache_size = 500 k auth_cache_ttl = 1000 secs disable_plaintext_auth = no first_valid_uid = 501 lock_method = dotlock mail_fsync = always mail_gid = vmail mail_location = maildir:%h/Maildir mail_nfs_index = yes mail_nfs_storage = yes mail_uid = vmail mmap_disable = yes namespace { inbox = yes location = prefix = INBOX. type = private } passdb { args = /etc/dovecot/dovecot-ldap.conf driver = ldap } plugin/quota = maildir plugin/quota_warning = storage=75%% /usr/local/dovecot/bin/quota-warning.sh 75 plugin/quota_warning2 = storage=90%% /usr/local/dovecot/bin/quota-warning.sh 90 protocols = imap pop3 service auth { unix_listener auth-master { group = vmail mode = 0700 user = vmail } user = root vsz_limit = 4 G } service imap-login { executable = /usr/local/dovecot/libexec/dovecot/imap-login inet_listener imap { address = * port = 143 } inet_listener imaps { address = * port = 993 } process_limit = 2048 process_min_avail = 20 user = dovecot } service imap { executable = /usr/local/dovecot/libexec/dovecot/imap process_limit = 2048 } service pop3-login { executable = /usr/local/dovecot/libexec/dovecot/pop3-login inet_listener pop3 { address = * port = 110 } inet_listener pop3s { address = * port = 995 } process_limit = 2048 process_min_avail = 20 user = dovecot } service pop3 { executable = /usr/local/dovecot/libexec/dovecot/pop3 process_limit = 2048 } ssl_cert = </etc/ssl/correo_domain.crt ssl_key = </etc/ssl/correo_domain.pem syslog_facility = local3 userdb { args = /etc/dovecot/dovecot-ldap.conf driver = ldap } valid_chroot_dirs = /buzones/ protocol imap { imap_client_workarounds = mail_plugin_dir = /usr/local/dovecot/lib/dovecot mail_plugins = quota imap_quota } protocol pop3 { mail_plugin_dir = /usr/local/dovecot/lib/dovecot mail_plugins = quota pop3_uidl_format = %08Xu%08Xv } protocol lda { auth_socket_path = /usr/local/dovecot/var/run/dovecot/auth-master hostname = hostname.domain.es mail_plugin_dir = /usr/local/dovecot/lib/dovecot mail_plugins = quota postmaster_address = postmaster(a)domain.es quota_full_tempfail = no rejection_reason = Su mensaje para <%t> fue rechazado automaticamente por nuestro sistema :%n%r rejection_subject = Rechazado: %s sendmail_path = /usr/sbin/exim } An here is my dovecot-ldap.conf: # INFORMACIÓN DE CONEXIÓN AL LDAP hosts = virt_ldap auth_bind = yes ldap_version = 3 dnpass = passwd dn = cn=XXXXXXXX,dc=domain,dc=es debug_level = -1 base = dc=domain,dc=es deref = never scope = subtree ## CONSULTA AL LDAP PARA AUTENTICACION pass_filter = (&(objectClass=qmailUser)(uid=%u)(accountActive=TRUE)) pass_attrs = uid=user, mailMessageStore=home, userPassword=password, mailQuotaSize=quota_rule=*:bytes=%$ ## CONSULTA AL LDAP COMO BBDD user_attrs = mailMessageStore=home, mailQuotaSize=quota_rule=*:bytes=%$ user_filter = (&(objectClass=qmailUser)(|(mailAlternateAddress=%u)(mail=%u)(uid=%u))(accountActive=TRUE)) Thank you very much in advanced Best regards, Héctor Moreno Blanco. ______________________ This message including any attachments may contain confidential information, according to our Information Security Management System, and intended solely for a specific individual to whom they are addressed. Any unauthorised copy, disclosure or distribution of this message is strictly forbidden. If you have received this transmission in error, please notify the sender immediately and delete it. ______________________ Este mensaje, y en su caso, cualquier fichero anexo al mismo, puede contener informacion clasificada por su emisor como confidencial en el marco de su Sistema de Gestion de Seguridad de la Informacion siendo para uso exclusivo del destinatario, quedando prohibida su divulgacion copia o distribucion a terceros sin la autorizacion expresa del remitente. Si Vd. ha recibido este mensaje erroneamente, se ruega lo notifique al remitente y proceda a su borrado. Gracias por su colaboracion. ______________________

2 1

[Dovecot] performance problems with IMAPS
by Linda Walsh 11 May '11

11 May '11

I've noticed this before and wasn't sure of the problem -- sending large files from FF. I tracked it down, and the problem is in dovecot when it is saving the mail to my 'Record' (Outbox)... It's saving the file in tiny chunks.... Looking at a few, I see: 4148 bytes 2116 bytes 1604 bytes 692 bytes The latency is killing it. I see the TCP window size being as high as 17069 with 7678 being common. The sendmail latency isn't spectacular, but at least uses ~64K packets. So wazzup with dovecot? I don't recall this being so much an issue with the old uwash imaps, but then it's been a while since I've used it and maybe my files weren't as large. But it can take several minutes to save a file to a record file that takes <1 second over network CIFS. Anyway to up the size of minimum packet size to 128K or more? Ideal packet size on my network is about 16MB under CIFS...with benefits seen even using 256MB packet sizes.... Is there a place to tune this that I don't know about? Thanks....

6 11

[Dovecot] sieve problem
by fakessh 11 May '11

11 May '11

hi dovecot network hi timo hi sieve writer I know one thing sieve scripts must be simple and follow the manual, knowing what he must do the thing well must wear a kind of precise name envellope sorry I'm not going to school I use sieve scripts for some time are published on my blog I just created an address partuculiere a subdomain. I have created in order to receive mailings on this address. how to write a script that would include the script in the early detection of the parameter "this email address" it is necessary to manage the delivery of mail in a subfolder such mailling and how after all conditions to evaluate the knowledge that a stop sign while stopped thank you -- http://pgp.mit.edu:11371/pks/lookup?op=get&search=0x092164A7 gpg --keyserver pgp.mit.edu --recv-key 092164A7

1 0

[Dovecot] Dovecot 1.2.x passwd and shadow auth w/ PAM
by Steven King 11 May '11

11 May '11

I'm trying to get authentication to work without PAM and just use the standard shadow and passwd files. auth default { userdb passwd { } passdb shadow { } } This seems to be valid code to use /etc/passwd and /etc/shadow. My linux distro is using Salted MD5. Though Dovecot keeps telling me that authentication failed. It doesn't give me any error messages regarding the config. Any ideas? -- Steve King Senior Linux Engineer - Advance Internet, Inc. Cisco Certified Network Associate CompTIA Linux+ Certified Professional CompTIA A+ Certified Professional

2 8

[Dovecot] Dovecot using FTS solr or Squat when searching multiple fields.
by duonut 10 May '11

10 May '11

Hi Im using dovecot 1.2.16 with Solr setup for FTS. When searching a single field such as subject Dovecot will use the solr index. When searching multiple fields such as subject and body it does not use the index and uses the standard built in search which takes much longer. Is there any way to get Dovecot to use the solr or squat index when searching multiple fields? -- View this message in context: http://old.nabble.com/Dovecot-using-FTS-solr-or-Squat-when-searching-multip… Sent from the Dovecot mailing list archive at Nabble.com.

2 1

Re: [Dovecot] could someone check my conf files for dovecot and postfix
by Trish 10 May '11

10 May '11

*> dovecot -n* # 1.2.9: /etc/dovecot/dovecot.conf # OS: Linux 2.6.32-31-generic i686 Ubuntu 10.04.2 LTS log_timestamp: %Y-%m-%d %H:%M:%S protocols: imap pop3 imaps pop3s disable_plaintext_auth: no login_dir: /var/run/dovecot/login login_executable(default): /usr/lib/dovecot/imap-login login_executable(imap): /usr/lib/dovecot/imap-login login_executable(pop3): /usr/lib/dovecot/pop3-login mail_privileged_group: mail mail_location: maildir:~/Maildir mbox_write_locks: fcntl dotlock mail_executable(default): /usr/lib/dovecot/imap mail_executable(imap): /usr/lib/dovecot/imap mail_executable(pop3): /usr/lib/dovecot/pop3 mail_plugin_dir(default): /usr/lib/dovecot/modules/imap mail_plugin_dir(imap): /usr/lib/dovecot/modules/imap mail_plugin_dir(pop3): /usr/lib/dovecot/modules/pop3 auth default: passdb: driver: pam userdb: driver: passwd I get this error in my log May 6 20:33:00 craftboard dovecot: IMAP(support.perlygates.com): mail_location: maildir: Unknown setting: mbox May 6 20:33:00 craftboard dovecot: IMAP(support.perlygates.com): Fatal: Namespace initialization failed I'm not sure what mbox is. But I am using the Maildir/ in conf file Where is mbox set at?

2 1

[Dovecot] Delete unused IMAP keywords from permanetflags
by Ernesto Revilla Derksen 10 May '11

10 May '11

Hi. I'm using dovecot 2.0.9. Is there already a way to remove unused IMAP keywords from a folder? I searched in google, wiki, etc. but didn't find anything useful. Thanx. Regards Erny

2 3

[Dovecot] Dovecot Maildir ownership/permission problem
by ikevinjp 10 May '11

10 May '11

Hi, I have successfully configured Dovecot+Postfix+SSL/TSL and it seems that everything is working except that I have a permission problem with the items under Maildir. When a mail is first delivered into a user, Postfix automatically creates the Maildir using the user's account and group. It is readable only by the user. This seems to be the correct setting for me, as only the user could read his/her own mails. However, Dovecot gave an error saying the Maildir is inaccessible and shows that is a permission problem. I changed the chmod to 777 and Dovecot worked (temporarily solution). And, it created additional items under that folder under a "mailman" user (which I specified in the configuration using mail_uid and mail_gid) - Note: it does not work if I do not set these "mail_uid" and "mail_gid" settings. I think what I would like is to make Dovecot access each individual's mailbox using the user's own account and group. How do I do this? I am using Passwd-file scheme. --- My dovecot.conf: mail_uid = vmail mail_gid = vmail listen = 192.168.1.2 protocols = imap pop3 ssl = yes ssl_cert = </usr/local/etc/sslcerts/server.crt ssl_key = </usr/local/etc/sslcerts/server.key mail_location = maildir:/home/%n/Maildir maildir_copy_with_hardlinks = yes auth_mechanisms = cram-md5 service auth { unix_listener auth-client { group = postfix mode = 0660 user = postfix path = /var/spool/postfix/private/auth } user = root } passdb { driver = passwd-file args = username_format=%n /usr/local/etc/dovecot/dovecot.users } log_path = /var/log/dovecot.log --- --- Some entries on my passwd-file would be: username:{CRAM-MD5}efaa8bbe8fb0d28a55f7595c3420791990f25cc536f0e23c46cb392cb2b058e2:1001:1001::/home/username:: peter:{CRAM-MD5}512b3e383d95a191d9481e1914cc4caad70cd57029706ec5c3db8ef3039ef405:2001:2001::/home/peter:: --- Any advice is greatly appreciated. Thanks! Kevin. -- View this message in context: http://old.nabble.com/Dovecot-Maildir-ownership-permission-problem-tp315733… Sent from the Dovecot mailing list archive at Nabble.com.

2 1

Re: [Dovecot] doveadm mailbox status 2.0.12 crashes
by Joseph Tam 10 May '11

10 May '11

On Mon, 9 May 2011, Timo Sirainen wrote: >> # dbx doveadm >> (dbx) run mailbox status -u user messages \* >> ... long list ... >> igel messages=1 >> INBOX messages=231 >> doveadm(user): Panic: Trying to deinit storage before freeing its objects > > A backtrace can't really show why it crashed with this. Something wasn't > freed for some reason. Can you still reproduce this? I'd like to know of > a way to reproduce this. Maybe you can copy this problematic user's > mailboxes to a test user and keep deleting stuff until you see what > triggers it? I started removing files as you've suggested and the minimal condition that triggers a crash is at least one non-mbox file. $ rm /var/mail/user $ rm -rf ~user/mail/* $ echo x >~user/mail/x $ doveadm mailbox status -u user messages \* doveadm(user): Error: Syncing mailbox x failed: Mailbox isn't a valid mbox file doveadm(user): Panic: Trying to deinit storage before freeing its objects doveadm(user): Error: Raw backtrace: 0xff1c296c -> 0xff2a4e20 -> 0xff29e5cc -> 0xff2a8784 -> 0xff2a89fc -> 0x168d4 -> 0x169e0 -> 0x16ef4 -> 0x1745c -> 0x1cafc -> 0x1629c Joseph Tam <jtam.home(a)gmail.com>

2 1

[Dovecot] Dovecot very slow on a mailbox with > 700 IMAP Folders
by Becker, Ronny 10 May '11

10 May '11

Hello, I am using Dovecot 1.2.9 on a 32bit on Ubuntu 10.04.2 LTS. We got one user who uses folders in an "exessive" way. He has got 704 subscribed folders. That means about nearly 3000 folders on the filesystem. Since ~ a week the user couldn't work because of timeouts when connecting to Dovecot (IMAP). Thunderbird doesn't show any folders - timeout - the webmail System (Groupoffice) only presents the INBOX. I did some debugging and found that a lsub "" "*" that is used by Thunderbird takes > 5 minutes. Thunderbird disconnects after ~1 Minute showing the timeout. I entered the command directly via port communication. So this is no clientside problem. But there is no error message or something else in any logs. I did some debugging with strace, too. It's about 22MB only for running the lsub command !? The Mailbox size is about ~2.2GB, so this should be no problem. The maximum subfolder level is about 13 - could this be a problem? You can find the structure (simply shown) attached. Thanks for any help!! Best regards Ronny Becker -- Mit freundlichen Grüßen, Ronny Becker Institut für Medizinische Diagnostik GmbH Ingelheim / Datenverarbeitung Konrad Adenauer Strasse 17 55218 Ingelheim Telefon: 06132 781 249 Fax: 06132 781 9 249 ronny.becker(a)bioscientia.de www.bioscientia.de Gesellschaft mit beschränkter Haftung mit Sitz in 55218 Ingelheim am Rhein, eingetragen im Handelsregister des Amtsgerichts Mainz unter HRB 21166. Geschäftsführer: PD. Dr. med. Markus Nauck und Dipl.-Vw. Johannes Brill. Vorsitzender des Aufsichtsrates: Prof. Dr. med. Bernd Heicke. Diese E-Mail kann vertrauliche oder auf andere Weise geschützte Informationen enthalten. Sollten Sie diese E-Mail irrtümlich erhalten haben, löschen Sie diese bitte von Ihrem System und setzen Sie uns unverzüglich von dem Vorfall in Kenntnis. USt-ID-Nr. DE 811138229 ___ Limited liability company with registered office in 55218 Ingelheim am Rhein, registered with the commercial register of the local court of Mainz under HRB 21166. Managing directors: PD Dr. med. Markus Nauck and Dipl.-Vw. Johannes Brill. Chairman of the supervisory board: Prof. Dr. med. Bernd Heicke. This e-mail may contain confidential or otherwise privileged information. If you are not the intended recipient, please inform us immediately and delete the e-mail from your system. VAT-ID-Nr. DE 811138229

6 10

Re: [Dovecot] Posfix and Dovecot (dovecot like LDA) and no space left on the disk
by Petr Svacina 10 May '11

10 May '11

Hi, No. No any version of the sieve us used .... > On 05/09/2011 05:37 PM, Petr Svacina wrote: >> Hi, >> >> Please I have a question: >> >> If my server is out of space (disk full) and the postfix is LDA, the new messages a deffered or refused,so postfix send 450 to sender ... >> But When I use dovecot (1.2.16) like LDA, postfix accept message (even there is no space), forward to dovecot, dovecot REFUSE the message and message is lost ! >> >> How can I solve this ? I don't want tu use quota and the disk was full, because of the other problem .... >> > > Are you using any plugins, like Sieve? > > Regards, > > Stephan. > -- Tato zprava byla prohledana na vyskyt viru a nebezpecneho obsahu antivirovym systemem MailScanner a zda se byt cista.

1 0

Re: [Dovecot] Posfix and Dovecot (dovecot like LDA) and no space left on the disk
by Petr Svacina 10 May '11

10 May '11

Hi, Yes know, I know, that ANY OUT of SPACE problem is SPECIALLY administrator's problem and please check my previous answer ... Out of space on the disk is my problem, but I want to know, why postfix receive message to it's spool (another partition - lot of space) and when postfix uses dovecot to deliver message to the inbox, where is NO space, why message is lost and removed from qmgr. thanks a lot :-) Peter > > On 5/9/2011 10:37 AM, Petr Svacina wrote: >> Hi, >> >> Please I have a question: >> >> If my server is out of space (disk full) and the postfix is LDA, the new messages a deffered or refused,so postfix send 450 to sender ... >> But When I use dovecot (1.2.16) like LDA, postfix accept message (even there is no space), forward to dovecot, dovecot REFUSE the message and message is lost ! >> >> How can I solve this ? I don't want tu use quota and the disk was full, because of the other problem .... > > This is more of a mail server admin 101 issue than a Dovecot issue. > Putting your log, mail spool, and user mail directories on separate > partitions, physical disks, or SAN LUNs will prevent such a problem from > occurring 99% of the time, assuming you have planned and sized your > storage appropriately for your environment. At minimum you should have > your spool and user mail storage on different partitions. To avoid this > issue the other 1% of the time, use monitoring or log summary tools to > notify you of disk space usage so you know when you're close to running > out of space. For instance, I receive the following as part of my daily > logwatch summary on my personal domain MX: > > Filesystem Size Used Avail Use% Mounted on > /dev/sda2 33G 4.2G 28G 14% / > /dev/sda1 92M 8.4M 79M 10% /boot > /dev/sda6 94G 1.2G 92G 2% /home > /dev/sda7 94G 25G 70G 26% /samba > > Note that I have both system logs and the mail spool on / but user mail > directories in /home. This setup is acceptable for a low volume server. > For a high volume server the mail spool should be on a dedicated > partition, as well as user mail dirs. > > If you already know all of this and an unforeseen issue caused your > problem, accept my apologies for preaching to the choir. > > -- > Stan > -- Tato zprava byla prohledana na vyskyt viru a nebezpecneho obsahu antivirovym systemem MailScanner a zda se byt cista.

1 0

Re: [Dovecot] Sieve & auto_create mail_home
by Maria Arrea 10 May '11

10 May '11

Hello I am still struggling with this, any idea? Regards Maria ----- Original Message ----- From: Maria Arrea Sent: 05/09/11 12:19 PM To: Dovecot Mailing List Subject: [Dovecot] Sieve & auto_create mail_home Hello In my setup I have the following in dovecot.conf (dovecot 2.0.12) mail_home = /buzones/mydomain/%2.26Hn/%2.200Hn/%n/home_usuario/ mail_location = mdbox:/buzones/my_domain/%2.26Hn/%2.200Hn/%n:INDEX=/indices_dovecot/indices/%2.26Hn/%2.200Hn/%n My problem is with the autocreation of mail_home. We are using roundcube+sieve plugin and the first time a user tries to use sieve fails with this: May 9 12:13:52 buzon dovecot: managesieve(a_poor_user@mydomain): Error: sieve-storage: open(/buzones/my_domain/0a/94/javierdemiguel/home_usuario/sieve//tmp/roundcube-1304936032.M335644P23819.mydomain.sieve) failed: No such file or directory In the second attempt works without problems, the folder "home_usuario" is created after failing the first. How can I fix this? Regards Maria

1 0

[Dovecot] mail_max_lock_timeout setup
by Osvaldo Alvarez Pozo 10 May '11

10 May '11

hi all in wich section most mail_max_lock_timeout be set up? Thanks.

2 2

[Dovecot] Posfix and Dovecot (dovecot like LDA) and no space left on the disk
by Petr Svacina 09 May '11

09 May '11

Hi, Please I have a question: If my server is out of space (disk full) and the postfix is LDA, the new messages a deffered or refused,so postfix send 450 to sender ... But When I use dovecot (1.2.16) like LDA, postfix accept message (even there is no space), forward to dovecot, dovecot REFUSE the message and message is lost ! How can I solve this ? I don't want tu use quota and the disk was full, because of the other problem .... thanks. Peter -- Tato zprava byla prohledana na vyskyt viru a nebezpecneho obsahu antivirovym systemem MailScanner a zda se byt cista.

4 3

[Dovecot] how to cat / grep from dbox files
by Sarder Kamal 09 May '11

09 May '11

Dear List members I am new to dovecot and am looking for a solution. I have googled as much as I could, but most likely my search criteria was wrong, and hence asking here. I am familiar with maildir format, and could easily do cat / grep / sed on those files to extract data. The server I am looking at now uses dbox format, which seems to store data in a different way. just to give you an example, when I do cat Drafts/dbox-Mails/u.11 I get the following output 2 M1e C4daa51f6 N 000000000000030A �Tmo�6��_q�0`�B�r�D�� tF�5Xܵ�HI'��D��T��=*^�u��M�A�x/�=ω׋E ��4�d�鰮M_4�Z�.�ިmt��e��U�=�=1۠s�B�^�0�_�_& �"��H��eehuCA�1�I]a��p��)\�-��H ��ɋt4��E,��I�P�G��+��Iյ�K+˖�u;9Z-��)ri��վ��un ��֡�W�@�m�l�P�'��.̃�|��6�͊��)�S�C�T��>��n��U�r��݃�]X9R��u�=�T��S_�:6��]�4hak��JWpkMe%��P_��~O~MW�jOU�F}�b� 3�]�~�/��8�_"��}L��覯|L�}6hE'�7 ��^ڐq�-Y�I��Ѯ.f��҉_<��o6�~_�\z��=�gXˆ4y~1�|/~�J�7O��O&��& lt;��j�t��z�[圱��x9�zwn��T�b�k��)�p��4` ��a|�HR��*7��d)�'��?FQ�[�gp8�O&�L2O[�t̃�`�� Z20479 R47f4b88e V20ba2 G1207220366.P10687Q2.server X1358 130815 B72 7f/7d/7f7dc5d880fa44444e57c6cbe2e4fd477dab1086-4db17526fa51aa4deb5e0000453e4b91 if I do less Drafts/dbox-Mails/u.11 below is the output 00000000 32 20 4d 31 65 20 43 34 64 61 61 35 31 66 36 0a |2 M1e C4daa51f6.| 00000010 01 02 4e 20 20 20 20 20 20 20 20 20 20 30 30 30 |..N 000| 00000020 30 30 30 30 30 30 30 30 30 30 33 30 41 0a 1f 8b |000000000030A...| 00000030 08 00 00 00 00 00 00 03 9d 54 6d 6f db 36 10 fe |.........Tmo.6..| 00000040 ce 5f 71 d3 30 60 c3 42 89 72 ec 44 95 ed 20 a9 |._q.0`.B.r.D.. .| 00000050 ed 74 46 e3 35 58 dc b5 fb 48 49 27 99 a9 44 1a |.tF.5X...HI'..D.| 00000060 a4 e4 54 fd f5 3d 2a 5e d2 75 d8 d0 4d b6 41 f3 |..T..=*^.u..M.A.| 00000070 78 2f cf 3d cf 89 d7 8b 45 0a aa 91 fb 34 8a 64 |x/.=....E....4.d| 00000080 dd e9 b0 ae 4d 5f 34 c6 5a e5 2e dd de a8 1a 6d |....M_4.Z......m| 00000090 74 87 ba 65 ef f9 ba a0 55 b5 3d 7f 8d 3d 05 15 |t..e....U.=..=..| 000000a0 31 db a0 73 b2 42 be 5e a6 30 1b 9f 5f 8f 5f 26 |1..s.B.^.0.._._&| 000000b0 c9 22 1c 8b 89 48 c4 e9 65 65 0e 68 75 43 41 f8 |."...H..ee.huCA.| 000000c0 31 df 49 5d 61 98 9b b0 fb 70 c1 96 b2 c5 14 b6 |1.I]a....p......| 000000d0 bb ee 04 c4 29 5c ed 2d 8c 84 48 20 8e d3 c9 8b |....)\.-..H ....| 000000e0 74 34 86 9f 45 2c 04 bb b6 a6 49 e1 8a 50 c1 8d |t4..E,....I..P..| 000000f0 47 05 9b 01 16 cc fe 06 f4 9f 2b bd e7 1b f3 49 |G.........+....I| 00000100 d5 b5 e4 4b 2b cb 96 af 75 69 08 3b 39 5a 2d eb |...K+...ui.;9Z-.| As it is quite evident, the output is in binary format, but I need it in text (even if that means I use some other command and pipe the output to cat / grep / sed) -- can this be done? This server was configured and maintained by someone else, and I am very new to dovecot or this dbox format (I used to use courier-imap). would appreciate if anyone could please suggest what could/should be done to get to my objectives. All pointers/suggestions appreciated. Thanks and regards Sarder ______________________________________________________________________ Centre for Parliamentary Studies This email and its attachments are intended only for disclosure to the recipients to whom they are addressed. Should you have received it in error, we regret any inconvenience and would request that you notify postmaster(a)parlicentre.org. Any opinions presented are solely those of its author and do not necessarily represent those of the company. Recipients are advised to check for the presence of malware as the company accepts no liability for the accidental transmission thereof. Centre for Parliamentary Studies is a trading name of CPS Framework Ltd. Registered Office: Unit N0002, Westminster Business Square, 1-45 Durham Street, London, SE11 5JH Registered in England & Wales, No. 6926090

3 4

[Dovecot] Renaming maildir files, UIDs and mail clients
by Helge Milde 09 May '11

09 May '11

Hi! First a little background: I'm thinking of compressing my Maildir's using dovecot's zlib support, and have run into a couple of problems. First of all, my files use the following formats: 1. 1260386673.000002.mbox:2,S 2. 1304920966.M241434P17342.mail,W=3152:2,S As you can see, both lack the S=<size> "basename flag", but the latter does have W=. Reading http://wiki.dovecot.org/Plugins/Zlib, I get the impression that I really need S= in the filenames (".. otherwise there will be problems with quota calculation as well as other potential random failures."). I have made a script that compresses my files, adds S=<size> if it's missing (using wc -c before gzip), and appends the Z flag. As I understand it, adding S=<size> will change the UID of the email, while appending Z won't. Now for my questions: 1. How crucial is it to have the S= in the basename when using zlib? The wiki page mentions quota problems, which we're not using, but also "random failures"... 2. Would W= suffice in this regard? I.e. would I be able to compress files of the latter format safely, without adding S= (only appending the Z flag)? 3. If S=<size> *is* needed, is there a way to minimize the effect from the mail client's perspective? From my testruns, it seems Mutt have no problems after I rename the basename, but Thunderbird will refetch the emails, and not delete the old ones, showing duplicate emails. Refetching emails is not a big problem, I think, but only if the email clients understand that the old ones doesn't exist anymore. And if anyone has ideas on how to convert to using zlib without the users knowing, I would be glad to hear it! -- Helge Milde www.monsternett.no

2 1

[Dovecot] Post-login scripting with mail_drop_priv_before_exec in dovecot2
by Mark Zealey 09 May '11

09 May '11

Hi, I'm in the process of upgrading from dovecot v1.1 to dovecot 2. We fetch uid/gid user information from a database and also use post-login scripting with mail_drop_priv_before_exec = yes which means the postlogin script is executed with the permissions of the user we have found in the database. According to the dovecot2 wiki page, to get this behaviour in version 2 we have to set the post-login script to run as root and then su to the user. This seems a bit of a strange (and insecure as you might forget) way of doing this. Are there any other options, such as fetching a certain column name from the database to set the value of service imap-postlogin { user } or setting something like user = $user in the configuration? (or is the configuration only read at startup so such dynamic configuration can't be done in the service section?) Cheers, Mark

2 2

Re: [Dovecot] sieve filters not being invoked
by Colin Brace 09 May '11

09 May '11

On Mon, 09 May 2011 13:00:45 +0200, Colin Brace wrote: > In the dovecot-lda log, I am now seeing some action, but there is a > > permissions problem somewhere: > > May 09 12:43:13 lda: Debug: Loading modules from directory: > /usr/local/lib/dovecot > May 09 12:43:13 lda: Debug: Module loaded: > /usr/local/lib/dovecot/lib90_sieve_plugin.so > May 09 12:43:13 lda: Error: userdb lookup: > connect(/var/run/dovecot//auth-userdb) failed: Permission denied > (euid=200(vmail) egid=6(mail) missing +w perm: > /var/run/dovecot//auth-userdb, euid is not dir owner) > May 09 12:43:13 lda: Fatal: Internal error occurred. Refer to server > log for more information. Following up my earlier mail, perhaps I am being obtuse here; I've changed the permissions of auth-userdb to 666, although I have no idea what these files in /var/run/dovecot are. These appears to solve the problem above. Renabling dovecot lda in Postfix, I try sending myself a message; however it gets bounced: "user unknown" (/var/log/maillog): [...] May 9 17:33:08 venus postfix/pipe[73445]: 8BCF629F3F: to=, relay=dovecot, delay=0.34, delays=0.3/0/0/0.03, dsn=5.1.1, status=bounced (user unknown) May 9 17:33:08 venus postfix/cleanup[73442]: C61332A0AB: message-id= May 9 17:33:08 venus postfix/bounce[73447]: 8BCF629F3F: sender non-delivery notification: C61332A0AB May 9 17:33:08 venus postfix/qmgr[73435]: C61332A0AB: from=, size=3183, nrcpt=1 (queue active) May 9 17:33:08 venus postfix/qmgr[73435]: 8BCF629F3F: removed May 9 17:33:08 venus postfix/smtpd[73444]: disconnect from localhost[127.0.0.1] May 9 17:33:08 venus postfix/lmtp[73443]: C5E4729ED5: to=, relay=venus[/var/run/dspam.sock], delay=1.1, delays=0.45/0/0/0.61, dsn=2.6.0, status=sent (250 2.6.0 Message accepted for delivery) May 9 17:33:08 venus postfix/qmgr[73435]: C5E4729ED5: removed If I comment out this line in main.cf, and restart Postfix, things work again: # virtual_transport = dovecot Any ideas on what is going wrong here? I feel I am almost there. -- Colin Brace Amsterdam http://lim.nl -- Colin Brace Amsterdam http://lim.nl

2 1

[Dovecot] sieve filters not being invoked
by Colin Brace 09 May '11

09 May '11

Hi all, Similar to someone who posted here yesterday, I am having trouble getting sieve filters working. I have installed pigeonhole. I can create, edit, and save scripts from both the Thunderbird sieve extension as well as the Roundcube sieve plugin via managesieve running on port 4190. The .sieve file is properly saved in ~/sieve with a symlink from ~/.dovecot.sieve. But the filters are not being invoked on incoming mail. I have mail_debug enabled, but I don't see anything useful in /var/log/dovecot. Anyone have any ideas? Thanks $ dovecot -n # 2.0.11: /usr/local/etc/dovecot/dovecot.conf # OS: FreeBSD 8.1-RELEASE amd64 ufs auth_verbose = yes base_dir = /var/run/dovecot/ disable_plaintext_auth = no first_valid_gid = 0 info_log_path = /var/log/dovecot log_path = /var/log/dovecot mail_access_groups = mail mail_debug = yes mail_location = maildir:/home/colin/vmail/%d/%n managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date passdb { args = /usr/local/etc/dovecot-passwd driver = passwd-file } plugin/sieve = ~/.dovecot.sieve plugin/sieve_dir = ~/sieve plugin/sieve_global_dir = /var/lib/dovecot/sieve/global/ plugin/sieve_global_path = /var/lib/dovecot/sieve/default.sieve protocols = imap sieve service auth { unix_listener /var/spool/postfix/private/auth { group = postfix mode = 0660 user = postfix } unix_listener auth-master { group = mail mode = 0660 user = vmail } user = root } service imap-login { executable = /usr/local/libexec/dovecot/imap-login vsz_limit = 64 M } service managesieve-login { inet_listener sieve { port = 4190 } } service pop3-login { executable = /usr/local/libexec/dovecot/imap-login vsz_limit = 64 M } ssl_cert = </etc/ssl/venus.crt ssl_key = </etc/ssl/venus.key userdb { driver = passwd } userdb { args = uid=vmail gid=vmail home=/home/colin/vmail/%d/%n driver = static } verbose_proctitle = yes protocol lda { mail_plugins = sieve } ----- Colin Brace Amsterdam http://lim.nl -- View this message in context: http://old.nabble.com/sieve-filters-not-being-invoked-tp31569757p31569757.h… Sent from the Dovecot mailing list archive at Nabble.com.

3 3

[Dovecot] mbox/maildir mixed setup with system/virtual mixed users
by Victor TARHON-ONU 09 May '11

09 May '11

Hello Everyone, I'm using dovecot 1.0.7 (not sure how relevant it is though) configured to handle both sytem users and virtual users. The system users are handled by default (PAM), while the virtual users are handled pretty much like this: passdb passwd-file { args = /var/spool/vmail/%d/auth/%n } ...And mailbox and folder location settings: userdb static { args = uid=mail gid=mail home=/var/spool/vmail/%d/mail/%n mail=mbox:/var/spool/vmail/%d/imap/%n:INBOX=mbox:/var/spool/vmail/%d/mail/%n } Everything works perfectly with the inbox and mail foder in mbox format. Now, what I'm trying to accomplish is to reconfigure dovecot to create and handle the secondary mail folders (/home/user/mail for system users and /var/spool/vmail/domainname/imap/user/imap for virtual users) in maildir format. I tried to define some name spaces to make this happen, but whatever I to do make one work (either the virtual users or the system users) would make the other non-functional. By example, I have these name space definitions and the virtual users work fine with maildir: namespace private { separator = / prefix = "#mbox/" location = mbox:/var/spool/vmail/%d/imap/%n:INBOX=/var/spool/vmail/%d/mail/%n inbox = yes hidden = yes } namespace private { separator = / prefix = location = maildir:/var/spool/vmail/%d/imap/%n hidden = yes } Maybe I didn't fully understand the namespace concept, but I was unable to make them apply only to one location of the imap folders locations or another. Can anyone give me a hand with this, if this setup is even possible? --

2 1

[Dovecot] Spelling error in #define ?
by Peter Mogensen 09 May '11

09 May '11

Hi, I stumbled over this define in lazy-expunge-plugin.h: #ifndef LAZY_EXPUNGE_PLUGIN_H #define TLAZY_EXPUNGE_PLUGIN_H Isn't there a "T" too much? http://hg.dovecot.org/dovecot-2.0/file/036260ae0261/src/plugins/lazy-expung… /Peter

2 1

[Dovecot] Saving mails to +detail failed: Namespace error
by Peer Heinlein 09 May '11

09 May '11

We have the following namespace: namespace { inbox = yes list = yes location = prefix = INBOX/ separator = / subscriptions = yes type = private } namespace { list = children location = maildir:%%h:INDEX=%h/shared/%%u:CONTROL=%h/shared/%%u prefix = shared/%%u/ separator = / subscriptions = yes type = shared } and we set: lmtp_save_to_detail_mailbox = yes recipient_delimiter = + But sending Mails to user+detail is failing: May 3 12:40:06 dobby2 postfix/cleanup[8245]: 12E787756C: message- id=<201105031239.40804.p.heinlein(a)heinlein-support.de> May 3 12:40:06 dobby2 postfix/qmgr[23304]: 12E787756C: from=<p.heinlein(a)heinlein-support.de>, size=1963, nrcpt=1 (queue active) May 3 12:40:06 dobby2 dovecot: lmtp(6537): Debug: auth input: p.heinlein(a)jpberlin.de home=/mail/jpberlin.de/p.heinlein/Maildir/ uid=10000 gid=10000 May 3 12:40:06 dobby2 dovecot: lmtp(6537, p.heinlein(a)jpberlin.de) Debug: Effective uid=10000, gid=10000, home=/mail/jpberlin.de/p.heinlein/Maildir/ May 3 12:40:06 dobby2 dovecot: lmtp(6537, p.heinlein(a)jpberlin.de) Debug: Namespace : type=private, prefix=INBOX/, sep=/, inbox=yes, hidden=no, list=yes, subscriptions=yes location=maildir:~:INDEX=/cache/jpberlin.de/p.heinlein May 3 12:40:06 dobby2 dovecot: lmtp(6537, p.heinlein(a)jpberlin.de) Debug: maildir++: root=/mail/jpberlin.de/p.heinlein/Maildir/, index=/cache/jpberlin.de/p.heinlein, control=, inbox=/mail/jpberlin.de/p.heinlein/Maildir/ May 3 12:40:06 dobby2 dovecot: lmtp(6537, p.heinlein(a)jpberlin.de) Debug: Namespace : type=shared, prefix=shared/%u/, sep=/, inbox=no, hidden=no, list=children, subscriptions=yes location=maildir: %h:INDEX=/mail/jpberlin.de/p.heinlein/Maildir//shared/%u:CONTROL=/mail/jpberlin.de/p.heinlein/Maildir//shared/%u May 3 12:40:06 dobby2 dovecot: lmtp(6537, p.heinlein(a)jpberlin.de) Debug: shared: root=/var/run/dovecot/, index=, control=, inbox= May 3 12:40:06 dobby2 dovecot: lmtp(6537, p.heinlein(a)jpberlin.de) Debug: Pg/fKrHav02JGQAAir+T1Q: sieve: user's script path /mail/jpberlin.de/p.heinlein/Maildir//../.dovecot.sieve doesn't exist (using global script path in stead) May 3 12:40:06 dobby2 dovecot: lmtp(6537, p.heinlein(a)jpberlin.de) Debug: Pg/fKrHav02JGQAAir+T1Q: sieve: user has no valid personal script May 3 12:40:06 dobby2 dovecot: lmtp(6537, p.heinlein(a)jpberlin.de) Debug: Pg/fKrHav02JGQAAir+T1Q: sieve: no scripts to execute: reverting to default delivery. May 3 12:40:06 dobby2 dovecot: lmtp(6537, p.heinlein(a)jpberlin.de) Pg/fKrHav02JGQAAir+T1Q: msgid=<201105031239.40804.p.heinlein@heinlein- support.de>: save failed to Cong: Unknown namespace May 3 12:40:06 dobby2 dovecot: lmtp(6537, p.heinlein(a)jpberlin.de) Pg/fKrHav02JGQAAir+T1Q: msgid=<201105031239.40804.p.heinlein@heinlein- support.de>: saved mail to INBOX May 3 12:40:06 dobby2 postfix/lmtp[8338]: 12E787756C: to=<p.heinlein+Cong(a)jpberlin.de>, relay=dobby.heinlein- support.de[private/lmtp-dovecot], delay=0.1, delays=0.06/0.02/0/0.02, dsn=2.0.0, status=sent (250 2.0.0 <p.heinlein+Cong(a)jpberlin.de> Pg/fKrHav02JGQAAir+T1Q Saved) But a folder named "Cong" exists: # ls -la .Cong -d drwx------ 5 vmail vmail 4096 30. Apr 04:46 .Cong # What's going wrong? My mistake or is it a bug? peer -- Die Mailserver-Konferenz: Das Know-how-Update für Postmaster 26./27. Mai 2011 - http://www.heinlein-support.de/mk Heinlein Professional Linux Support GmbH Linux: Akademie - Support - Hosting http://www.heinlein-support.de Tel: 030 / 40 50 51 - 0 Fax: 030 / 40 50 51 - 19 Zwangsangaben lt. §35a GmbHG: HRB 93818 B / Amtsgericht Berlin-Charlottenburg, Geschäftsführer: Peer Heinlein -- Sitz: Berlin

2 1

[Dovecot] Restricting IMAP
by Matt 09 May '11

09 May '11

I want to restrict IMAP use too 127.0.0.1 and to only certain usernames. Such as fred(a)my777domain.com would be allowed to use IMAP. How would I do that with Dovecot or can I? Basically I want webmail to work with IMAP regardless of username but I only want certain usernames allowed to use IMAP remotely.

3 2

[Dovecot] example-config mail_log plugin options
by Lutz Preßler 09 May '11

09 May '11

Hello, dovecot-2.0.12/doc/example-config/conf.d/10-logging.conf contains # mail_log plugin provides more event logging for mail processes. plugin { # Events to log. Also available: flag_change append #mail_log_events = delete undelete expunge copy mailbox_delete mailbox_rename # Group events within a transaction to one line. #mail_log_group_events = no # Available fields: uid, box, msgid, from, subject, size, vsize, flags # size and vsize are available only for expunge and copy events. #mail_log_fields = uid box msgid size } "mail_log_group_events" seems to be gone (when and why?). And it's now "save" instead of "append", with "mailbox_create" also available. Greetings, Lutz Pressler -- Lutz Preßler <Lutz.Pressler(a)SerNet.DE> http://www.SerNet.DE/ SerNet Service Network GmbH, Bahnhofsallee 1b, D-37081 Göttingen Tel.: +49-551-370000-2, FAX: +49-551-370000-9 AG Göttingen, HRB 2816, GF: Dr. Johannes Loxen

2 1

[Dovecot] Corrupted index cache file
by Frank Bonnet 09 May '11

09 May '11

Hello I got this error message yesterday evening for a user I've checked LDA error log it happened 6 times in 3 days for 5 differents users, not much but I wonder what's going on as actually the server is moderately loaded ( Easter holidays ) we have currently 250/300 IMAP processes , in "normal" production time we have approx 1000 IMAP processes running. Apr 14 19:24:37 imap(xxxxxxx): Error: FETCH [] for mailbox Drafts (Hugues at ESIEE) UID 17836 got too little data: 16384 vs 18012 Apr 14 19:24:37 imap(xxxxxxx): Error: Corrupted index cache file /var/cache/dovecot/index/xxxxxxx/.imap/Drafts (Hugues at ESIEE)/dovecot.index.cache: Broken virtual size for mail UID 17836 The machine is supposed to be HUDGE for our 4000 mailboxes HP Proliant DL380 G7 , 12 Gb RAM 24 cores !!! I've located index/cache files on another disk than users mailboxes mailboxes are living on a 2Tb RAID array ( 50% full ) index/cache are living on another single disk ( 10% full ) I run Dovecot 2.0.11 + dovecot2-pigeonhole compiled from FreeBSD 8.2 ports Dovecot or hardware problem ??? Thanks a lot for any ideas/infos

4 4

[Dovecot] doveadm mailbox status 2.0.12 crashes
by Joseph Tam 09 May '11

09 May '11

My gdb won't cooperate and produce a backtrace so I hope this dbx stack trace gives sufficient clues as to why it crashed. It happended when I was testing a doveadm command for a user which a large collection of mboxs: # dbx doveadm (dbx) run mailbox status -u user messages \* ... long list ... igel messages=1 INBOX messages=231 doveadm(user): Panic: Trying to deinit storage before freeing its objects doveadm(user): Error: Raw backtrace: 0xff1bf0e4 -> 0xff1bf34c -> 0xff2a42a0 -> 0xff29d68c -> 0xff29e494 -> 0xff2a7bc4 -> 0xff2a7e3c -> 0x16894 -> 0x169a0 -> 0x16e18 -> 0x17234 -> 0x17304 -> 0x1c0a0 -> 0x1629c signal ABRT (Abort) in __lwp_kill at 0xfefcd6ac 0xfefcd6ac: __lwp_kill+0x0008: bcc,a,pt %icc,__lwp_kill+0x18 ! 0xfefcd6bc Current function is default_fatal_finish dbx: warning: can't find file "/build/dovecot-2.0.12/src/lib/failures.c" (dbx) where [1] __lwp_kill(0x0, 0x6, 0x0, 0x6, 0xffbffeff, 0x0), at 0xfefcd6ac [2] raise(0x6, 0x0, 0x0, 0xfefacd88, 0xffffffff, 0x6), at 0xfef669ac [3] abort(0xff1ea980, 0x1, 0x0, 0xee4cc, 0xff0334d8, 0x0), at 0xfef42010 =>[4] default_fatal_finish(type = LOG_TYPE_PANIC, status = 0), line 187 in "failures.c" [5] default_fatal_handler(ctx = 0xffbff598, format = (nil), args = 0xffbff600), line 201 in "failures.c" [6] i_panic(format = 0xff30d3b8 "Trying to deinit storage before freeing its objects", ...), line 259 in "failures.c" [7] mail_storage_unref(_storage = 0x6b9ec), line 379 in "mail-storage.c" [8] mail_namespace_free(ns = 0x6b9b8), line 52 in "mail-namespace.c" [9] mail_namespaces_deinit(_namespaces = 0x66efc), line 438 in "mail-namespace.c" [10] mail_user_deinit_base(user = 0x66ec0), line 28 in "mail-user.c" [11] mail_user_unref(_user = 0x55450), line 140 in "mail-user.c" [12] doveadm_mail_next_user(ctx = 0x55438, input = 0x55450, error_r = 0xffbff8c4), line 221 in "doveadm-mail.c" [13] doveadm_mail_single_user(ctx = 0x55438, argv = 0xffbffc08, username = 0xffbffd1f "user", service_flags = -4196156), line 246 in "doveadm-mail.c" [14] doveadm_mail_cmd(cmd = 0x544f0, argc = 5, argv = 0xffbffc08), line 416 in "doveadm-mail.c" [15] doveadm_mail_try_run_multi_word(cmd = 0x544f0, cmdname = 0x2ade0 "status", argc = 6, argv = 0xffbffbf8), line 457 in "doveadm-mail.c" [16] doveadm_mail_try_run(cmd_name = 0xffbffd0d "mailbox", argc = 6, argv = 0xffbffbf8), line 480 in "doveadm-mail.c" [17] main(argc = 6, argv = 0xffbffbf8), line 183 in "doveadm.c" Joseph Tam <jtam.home(a)gmail.com>

2 1

[Dovecot] NONEXISTENT handling
by Michael M Slusarz 09 May '11

09 May '11

As of 2.0.12, looks like NONEXISTENT response code isn't working properly again. Previously brought up issues relating to this here: http://markmail.org/message/jxbgdfv26pws66og With a nonexistent mailbox "FOO", I see this: 1 DELETE "FOO" 1 NO Mailbox doesn't exist: FOO // Should be: 1 NO [NONEXISTENT] Mailbox doesn't exist: FOO 2 RENAME "FOO" "BAR" 2 NO Mailbox doesn't exist: FOO // Should be: 2 NO [NONEXISTENT] Mailbox doesn't exist: FOO michael

2 1

Re: [Dovecot] alpine + Maildir
by upen 09 May '11

09 May '11

On Mon, May 9, 2011 at 10:16 AM, upen <upendra.gandhi(a)gmail.com> wrote: >>> >> What you are probably looking for is in the alpine configuration (setup -> >> configure) the 'Hide Empty Directories' option which you have to turn on. >> >> It corresponds to the 'quell-empty-directory' in pinerc >> >> Hope it helps. >> Hi Wolfgang, You are right, that option should have taken care of [/] directory after each folder , however for some reason it doesn't and I don't understand why. One update however with #md implementation is that I just tried one more thing in my alpine configuration and [/] has vanished after that so probably I don't have to configure for password-less alpine on the email server. Here is the specific configuration from my /etc/pine.conf or .pinerc 1. maildir-location=../../Mail/${LOGNAME} #folder-collections=Mail {localhost/novalidate-cert/ssl/user=${LOGNAME}}[] <---- Commented. 2. folder-collections=Mail #md/../../Mail/${LOGNAME}/.[] With this configuration, all folders appear fine. Folders : INBOX sent-mail saved-messages ABC PINE_FOLDER Queue Sent Trash sent-mail-apr-2011 In addition, I am going to change sent messages and saved messages setting as below so that when users are migrated from ~/mail to /Mail/user/ (maildir) format then their newly sent emails and saved messages also continue to go into /Mail/user/.sent-mail and /Mail/user/.saved-messages folder respectively. default-fcc=sent-mail default-saved-msg-folder=saved-messages Thank you everyone for their inputs. Appreciate it. UG

1 0

Re: [Dovecot] alpine + Maildir
by upen 09 May '11

09 May '11

On Mon, May 9, 2011 at 10:01 AM, upen <upendra.gandhi(a)gmail.com> wrote: >> >> This is what I am doing right now. >> >> http://www.asheesh.org/note/sysop/passwordless-alpine.html says a little >> more. I strongly recommend this. >> >> In fact, I think I should someday talk to the re-alpine team and figure out >> how to make this easier to configure. It's already reasonably easy, but it >> can require some fiddling. > Hi Asheesh, Excellent, that is a very very useful information. I am going to try and use this method if #md doesn't work at all. Thanks very much for helping me out. Thanks, UG

1 0

[Dovecot] dovecot user lost entire folder
by Spyros Tsiolis 09 May '11

09 May '11

Hello kind people, OK, today is a bad day for me. A user from a clients' site called early in the morning to inform me that she lost an entire folder on thunderbird with (naturally) important stuff in it. I am trying to find the lost folder, but there is nowhere to be found. Any ideas would greatly appreciated. Regards, Spyros "dovecot -n" : ------------------------------------------------- # 1.2.16: /etc/dovecot/dovecot.conf # OS: Linux 2.6.18-194.17.4.el5 i686 CentOS release 5.5 (Final) ext3 base_dir: /var/run/dovecot/ log_path: /var/log/dovecot/dovecot.log info_log_path: /var/log/dovecot/dovecot-info.log ssl_parameters_regenerate: 48 verbose_ssl: yes login_dir: /var/run/dovecot//login login_executable: /usr/local/dovecot/libexec/dovecot/imap-login login_greeting: * Dovecot ready * login_max_processes_count: 64 mail_location: maildir:/var/MailRoot/domains/%d/%n/Maildir mail_plugins: zlib auth default: verbose: yes debug: yes debug_passwords: yes passdb: driver: passwd-file args: /etc/dovecot/passwd passdb: driver: pam userdb: driver: static args: uid=vmail gid=vmail home=/home/vmail/%u userdb: driver: passwd ------------------------------------------------- ---- "I merely function as a channel that filters music through the chaos of noise" - Vangelis

3 7

[Dovecot] Fwd: Saving mails to +detail failed: Namespace error
by Peer Heinlein 09 May '11

09 May '11

Hi! Since our mails aren't saved correctly since we updated to 2.xx I'd really appreciate some help. What's going wrong? My mistake? Bug? Peer ---------- Weitergeleitete Nachricht ---------- Betreff: [Dovecot] Saving mails to +detail failed: Namespace error Datum: Dienstag, 3. Mai 2011, 12:50:20 Von: Peer Heinlein <p.heinlein(a)heinlein-support.de> An: dovecot(a)dovecot.org We have the following namespace: namespace { inbox = yes list = yes location = prefix = INBOX/ separator = / subscriptions = yes type = private } namespace { list = children location = maildir:%%h:INDEX=%h/shared/%%u:CONTROL=%h/shared/%%u prefix = shared/%%u/ separator = / subscriptions = yes type = shared } and we set: lmtp_save_to_detail_mailbox = yes recipient_delimiter = + But sending Mails to user+detail is failing: May 3 12:40:06 dobby2 postfix/cleanup[8245]: 12E787756C: message- id=<201105031239.40804.p.heinlein(a)heinlein-support.de> May 3 12:40:06 dobby2 postfix/qmgr[23304]: 12E787756C: from=<p.heinlein(a)heinlein-support.de>, size=1963, nrcpt=1 (queue active) May 3 12:40:06 dobby2 dovecot: lmtp(6537): Debug: auth input: p.heinlein(a)jpberlin.de home=/mail/jpberlin.de/p.heinlein/Maildir/ uid=10000 gid=10000 May 3 12:40:06 dobby2 dovecot: lmtp(6537, p.heinlein(a)jpberlin.de) Debug: Effective uid=10000, gid=10000, home=/mail/jpberlin.de/p.heinlein/Maildir/ May 3 12:40:06 dobby2 dovecot: lmtp(6537, p.heinlein(a)jpberlin.de) Debug: Namespace : type=private, prefix=INBOX/, sep=/, inbox=yes, hidden=no, list=yes, subscriptions=yes location=maildir:~:INDEX=/cache/jpberlin.de/p.heinlein May 3 12:40:06 dobby2 dovecot: lmtp(6537, p.heinlein(a)jpberlin.de) Debug: maildir++: root=/mail/jpberlin.de/p.heinlein/Maildir/, index=/cache/jpberlin.de/p.heinlein, control=, inbox=/mail/jpberlin.de/p.heinlein/Maildir/ May 3 12:40:06 dobby2 dovecot: lmtp(6537, p.heinlein(a)jpberlin.de) Debug: Namespace : type=shared, prefix=shared/%u/, sep=/, inbox=no, hidden=no, list=children, subscriptions=yes location=maildir: %h:INDEX=/mail/jpberlin.de/p.heinlein/Maildir//shared/%u:CONTROL=/mail/jpberlin.de/p.heinlein/Maildir//shared/%u May 3 12:40:06 dobby2 dovecot: lmtp(6537, p.heinlein(a)jpberlin.de) Debug: shared: root=/var/run/dovecot/, index=, control=, inbox= May 3 12:40:06 dobby2 dovecot: lmtp(6537, p.heinlein(a)jpberlin.de) Debug: Pg/fKrHav02JGQAAir+T1Q: sieve: user's script path /mail/jpberlin.de/p.heinlein/Maildir//../.dovecot.sieve doesn't exist (using global script path in stead) May 3 12:40:06 dobby2 dovecot: lmtp(6537, p.heinlein(a)jpberlin.de) Debug: Pg/fKrHav02JGQAAir+T1Q: sieve: user has no valid personal script May 3 12:40:06 dobby2 dovecot: lmtp(6537, p.heinlein(a)jpberlin.de) Debug: Pg/fKrHav02JGQAAir+T1Q: sieve: no scripts to execute: reverting to default delivery. May 3 12:40:06 dobby2 dovecot: lmtp(6537, p.heinlein(a)jpberlin.de) Pg/fKrHav02JGQAAir+T1Q: msgid=<201105031239.40804.p.heinlein@heinlein- support.de>: save failed to Cong: Unknown namespace May 3 12:40:06 dobby2 dovecot: lmtp(6537, p.heinlein(a)jpberlin.de) Pg/fKrHav02JGQAAir+T1Q: msgid=<201105031239.40804.p.heinlein@heinlein- support.de>: saved mail to INBOX May 3 12:40:06 dobby2 postfix/lmtp[8338]: 12E787756C: to=<p.heinlein+Cong(a)jpberlin.de>, relay=dobby.heinlein- support.de[private/lmtp-dovecot], delay=0.1, delays=0.06/0.02/0/0.02, dsn=2.0.0, status=sent (250 2.0.0 <p.heinlein+Cong(a)jpberlin.de> Pg/fKrHav02JGQAAir+T1Q Saved) But a folder named "Cong" exists: # ls -la .Cong -d drwx------ 5 vmail vmail 4096 30. Apr 04:46 .Cong # What's going wrong? My mistake or is it a bug? peer -- Heinlein Professional Linux Support GmbH Linux: Akademie - Support - Hosting http://www.heinlein-support.de Tel: 030/405051-42 Fax: 030/405051-19 Zwangsangaben lt. §35a GmbHG: HRB 93818 B / Amtsgericht Berlin-Charlottenburg, Geschäftsführer: Peer Heinlein -- Sitz: Berlin

1 0

Re: [Dovecot] exceeded mail_max_userip_connections
by Voytek Eymont 09 May '11

09 May '11

On Mon, May 9, 2011 11:51 am, Mark Sapiro wrote: > Voytek Eymont wrote: >> I thought it was 3.6x, I installed off market abt one week ago > If you got it a week ago from the market, it's probably 3.604. thanks, 3.605 -- Voytek

1 0

[Dovecot] Issues with authentication failure delays
by Kevin Goodsell 08 May '11

08 May '11

There are two rather clear issues with the state of authentication failure delays. First, the delay length isn't what was (presumably) intended. Second, there is a new way of doing failure delays in Dovecot 2 which was added *in addition to* the old method, rather than replacing it. As a result delays may not be the expected length and settings don't have the expected effect. First, the length of the failure delays. Based on auth/auth-penalty.c and auth/auth-penalty.h, it seems rather clear that the delay time (for the newer type of failure delay) was intended to start at 2 seconds and double for each failure (see auth_penalty_to_secs), but be capped at 15 seconds. However, a simple test which tries to log in 5 times with a random password and times each attempt shows something different: $ cat authtest.py import imaplib import time import random conn = imaplib.IMAP4('localhost') for i in range(5): try: start = time.time() conn.login('testusers', str(random.random())) except Exception, e: print e print time.time() - start $ python authtest.py [AUTHENTICATIONFAILED] Authentication failed. 0.502058982849 [AUTHENTICATIONFAILED] Authentication failed. 4.50464391708 [AUTHENTICATIONFAILED] Authentication failed. 8.50679802895 [AUTHENTICATIONFAILED] Authentication failed. 15.5040819645 [AUTHENTICATIONFAILED] Authentication failed. 15.5039038658 (Note that these results are with auth_failure_delay set to 0, more on that in a bit.) Aside from the extra half second on each attempt (which I have no clue about), there is no delay on the first attempt. Subsequent delays seem to have the correct timing. I *think* this is because auth_penalty_lookup is called from auth_request_handler_auth_begin, that is, at the *beginning* of an authentication attempt, therefore not affecting the first failed attempt. This may be too minor an issue to worry much about, but it certainly looks to me like it's not doing quite what was intended. Moving on to the second issue. Revision fbff8ca77d2e added a new style of authentication failure delay, but left the existing failure delay mechanism in place. The old failure delay uses the auth_failure_delay setting, and could be disabled by using a value of 0 for that setting. Its remnants are in auth/auth-request-handler.c in the function auth_request_handler_flush_failures. It looks like much of the code in that file could be removed or simplified by eliminating this older failure delay system. Better still, I would like to see the auth_failure_delay setting retained and used in the new system. The value of the setting could be used in place of AUTH_PENALTY_INIT_SECS, allowing similar configurability to what the old system offered. -Kevin

1 0

[Dovecot] exceeded mail_max_userip_connections
by Voytek Eymont 08 May '11

08 May '11

Dumb Q I just got this in my Snapper client log I can't acces server log at this point dovecot 1.x I can access another account OK what it means, what I need do? (is this as I have K-9 client access same mail?) ---------- START MANUAL: 8/5/11 10:55 am RECEIVE: ACCOUNT: voytek SSL: Connection secure. IMAP Server: Maximum number of connections from user+IP exceeded (mail_max_userip_connections) Invalid login. Check username and password. DURATION: 3 END: 8/5/11 10:55 am Voytek Eymont ___ Sent from my iPalm/A with SnapperMail ™® www.snappermail.com

2 2

[Dovecot] alpine + Maildir
by upen 08 May '11

08 May '11

Hello, I am trying to configure pine.conf for all users and running into an issue. In this setup, Mailbox format is Maildir and Maildir location is /Mail/Username/{new,cur,..etc} First thing required in alpine was patch for maildir and this has already been done. After that I have tried setting up folder-collection Mail #md ../../Mail/username and also tried using #mc (not sure which one is correct #md or #mc). Nothing worked. If maildir support in alpine does not work like it does for mbox then I'll have to configure IMAP setings in pine.conf for alpine users. I must say that alpine is installed on mail server :). Although IMAP setting may work fine, it will prompt user for password initially when checking email and while sending first email. I'd like to avoid this by using #md or #mc. If anyone has any useful inputs please let me know. Thank you! UG.

6 12

[Dovecot] Building Pigeonhole
by Peter Bell 08 May '11

08 May '11

I'm attempting to build Pigeonhole 0.2.3 for use with my Dovecot 2.0.12 installation on Slackware. I've downloaded the sources and unzipped into a folder which sits alongside the folder in which I built Dovecot. When I ./configure, the configuration appears to complete without error. However, when I make, the compiler throws lots of errors all stemming, I believe from its failure to find a set of include files: cmd-vacation.c:4:17: error: lib.h: No such file or directory cmd-vacation.c:5:17: error: str.h: No such file or directory cmd-vacation.c:6:22: error: strfuncs.h: No such file or directory cmd-vacation.c:7:17: error: md5.h: No such file or directory cmd-vacation.c:8:21: error: hostpid.h: No such file or directory cmd-vacation.c:9:26: error: str-sanitize.h: No such file or directory cmd-vacation.c:10:29: error: message-address.h: No such file or directory cmd-vacation.c:11:26: error: message-date.h: No such file or directory cmd-vacation.c:12:20: error: ioloop.h: No such file or directory I believe that these files are all part of the main Dovecot - what am I meant to be doing so that the Pigeonhole build process can find them? Peter. -- ------------------------------------------------------------------- Peter Bell Mob: +63 (0) 9287 340 343 Tagum City, Philippines. Tel: +63 (0) 84 400 5085 email/msn: peter(a)bellfamily.org.uk Tel: +44 (0) 118 331 0000

2 1

[Dovecot] Dovecot2 - equivalent of "dovecot --exec-mail imap" with custom configuration file
by Andrzej Adam Filip 08 May '11

08 May '11

Is it possible in dovecot2 to run "imap via stdin&stdout" *WITH* custom configuration file? http://wiki2.dovecot.org/Upgrading/2.0 * "dovecot --exec-mail imap" has been replaced by simply running "imap" binary. ... -- [pl>en: Andrew] Andrzej Adam Filip : anfi(a)onet.eu Love is the only game that is not called on account of darkness. -- M. Hirschfield

2 2

[Dovecot] Shared mailboxes and acl
by Juan C. Blanco 07 May '11

07 May '11

Hello, I've finally upgrade to dovecot 2.0.12 and I'm doing some test with shared mailboxes and acl. I've read http://wiki2.dovecot.org/SharedMailboxes/Shared and changed the dovecot config as recommended, I'm using Horde/IMP as imap_acl client Seems that the acl files in user mailbox where updated correctly. I've defined also a shared mailbox dictionary and if I've understood right from the wiki page this file is supposed to be also updated with the imap_acl commands, is this right? In my case this file is never updated, I don't know if this file must have any special format or is a simple text file. Any help will be appreciated Regards Juan C. Blanco

1 1

[Dovecot] IMAP push
by Janantha Marasinghe 07 May '11

07 May '11

Dear all, Im running dovecot v2 and want to know if it supports IMAP push capabilities. I have a few client who has blackberries, iphones and tabs. Please let me know. Sent via Mobile

4 7

[Dovecot] Modified dovecot_deleted_to_trash-0.3.ebuild plugin
by Robert S 07 May '11

07 May '11

I have just upgraded my gentoo system to dovecot 2.0.11. The ebuild on http://wiki2.dovecot.org/Plugins/deleted-to-trash does not compile. I have modified this to a working version - see below. # cat dovecot_deleted_to_trash-0.3.ebuild EAPI="2" DESCRIPTION="Deleted to trash IMAP plugin for Dovecot" HOMEPAGE="http://wiki2.dovecot.org/Plugins/deleted-to-trash" RESTRICT="nomirror" SRC_URI="http://wiki2.dovecot.org/Plugins/deleted-to-trash?action=AttachFile&do=get&… -> ${P}.tar" LICENSE="" KEYWORDS="~amd64 ~x86" SLOT="0" IUSE="" RDEPEND="net-mail/dovecot" src_unpack() { unpack ${A} sed -i "8s|DOVECOT_IMAP_PLUGIN_PATH\ \=\ /usr/lib/dovecot/imap|DOVECOT_IMAP_PLUGIN_PATH\ \=\ /usr/lib/dovecot|" Makefile } src_install() { emake DESTDIR="${D}" install || die }

1 0

Re: [Dovecot] May 05 07:20:21 imap: Warning: Time jumped forwards 16 seconds
by Spyros Tsiolis 06 May '11

06 May '11

Hello, You say ntpd is running. Is it running as a daemon ? AFAIK, to keep good time on a linux machine inside the network, you need to run "ntpdate" and not "ntpd". I had _exactly_ the same problem and I was running an ntp daemon. I wasn't actually syncing to anything. So,I did some searching and found out that I need to run "ntpdate ntp.server.fqdn", then add this same line to cron. HTH, s. ---- "I merely function as a channel that filters music through the chaos of noise" - Vangelis

10 13

[Dovecot] Encoding dovecot keywords
by Алексей Сундуков 06 May '11

06 May '11

Hello. If mailbox name include non latin chars, dovecot save it encode to modification UTF-7. Example "тест" convert to "&BEIENQQ6BEEEQg-". If replace & to + I can decode it: <?php $str = '+BEIENQQ6BEEEQg-'; echo iconv('UTF-7', 'UTF-8', $str); ?> But I can't understand what encoding use dovecot for keywords? I set "тест" (number 5) keyword: cat dovecot-keywords 0 &bcienqrbbeiepgqybdaetw-_&bdwenqrcbdoema- 1 test 2 $label1 3 $label2 4 $label3 5 &beienqq6beeeqg- but "&beienqq6beeeqg-" do not convert to "тест". Why?

4 6

Re: [Dovecot] May 05 07:20:21 imap: Warning: Time jumped forwards 16 seconds
by Alexander Moisseev 06 May '11

06 May '11

Are you got this warnings only after OS reboot? -- Alexander Moisseev

1 0

[Dovecot] May 05 07:20:21 imap: Warning: Time jumped forwards 16 seconds
by Frank Bonnet 05 May '11

05 May '11

Hello I get this warning in dovecot.log the machine is running ntpd so this is a bit strange ...

3 2

[Dovecot] Post-login scripting last login question
by Robert Schetterer 05 May '11

05 May '11

Hi Timo, is there any relation between Post-login scripting i.e like last_login writing and imap/pop3 performance i.e on cluster file systems like ocfs2 etc ? -- Best Regards MfG Robert Schetterer Germany/Munich/Bavaria

1 0

[Dovecot] Bug Report: Failure delay config is ignored
by Kevin Goodsell 04 May '11

04 May '11

I have a set of automated tests for a system that can authenticate a user by forwarding authentication details to a server. That is, in order to authenticate a user, this system logs on to, e.g., an IMAP server using the credentials supplied by the user to verify the correctness of those credentials. I've been using dovecot as the authentication server to test IMAP, IMAPs, POP3, and APOP. To run the tests (most of which are authentication failures), I configure dovecot without authentication failure delays, since obviously I don't want to wait several minutes for the tests to finish. Setting the configuration variable auth_failure_delay to 0 worked fine in Dovecot 1.2, but since Debian updated to Dovecot 2.0 it no longer works. The tests take a very long time to run. I tried changing my passwd file to include nodelay=y, but this only works in a very limited way. For the set of tests which use the correct username, but an incorrect password, this successfully disables the failure delay. However, for the set of tests which use incorrect usernames (names not found in the user database or the password database, and which therefore don't have the extra nodelay field), the failure delay still occurs. There seems to be at least two problems here. The first is that it isn't clear what effect auth_failure_delay has. The comment in the sample config file just says "Time to delay before replying to failed authentications", which is certainly an incomplete description if not totally inaccurate. This setting seems to be completely unmentioned in the 2.0 wiki. The second problem is that the nodelay extra field can only be applied on a per-user basis. There doesn't seem to be any way to apply it to all users, or to apply it to authentication attempts for non-existent users. It seems to me that the failure delay that is actually used should either be 1) the actual value of auth_failure_delay (ideally with some random variance for extra security, but recognizing 0 as meaning disabled) or 2) some multiple of auth_failure_delay, where the multiplier increases with subsequent failures up to some max delay, with 0 still giving no delay. Config information follows. Thanks. -Kevin $ dovecot -n # 2.0.12: /etc/dovecot/dovecot.conf # OS: Linux 2.6.32-5-686 i686 Debian wheezy/sid auth_debug = yes auth_failure_delay = 0 auth_mechanisms = plain apop auth_verbose = yes listen = 127.0.0.1 log_path = /var/log/dovecot mail_location = maildir:~/Maildir passdb { args = /etc/dovecot/passwd driver = passwd-file } protocols = " imap pop3" ssl_cert = </etc/ssl/certs/dovecot.pem ssl_key = </etc/ssl/private/dovecot.pem userdb { driver = passwd } $ cat /etc/dovecot/passwd testuser:{PLAIN}testpassword::::::nodelay=y

1 0

[Dovecot] Forwarding loop
by Brian Mihulka 04 May '11

04 May '11

I used to filter my mail through gmail with the following sieve rule. if not header :contains "X-Forwarded-To" "bmihulka(a)hulkster.net"{ redirect "bmihulka(a)gmail.com"; } With the gmail account set to forward to bmihulka(a)hulkster.net After upgrading to dovecot 1.2.9 and postfix 2.7.0 from whatever was with debian etch. I get a forwarding loop error. I don't know if this is a dovecot issue or postfix issue so I'm starting here. If anyone has any ideas or a better place to ask about this please let me know. Thanks Brian Mihulka

4 3

Re: [Dovecot] dovecot Digest, Vol 96, Issue 61
by Ceyhun Ganioglu 04 May '11

04 May '11

"Choosing the IMAP sent folder as account's sent items folder" is not working. That was the problem. But I fixed the problem using a "copy on send" rule. Many thanks ------------------------------ Message: 7 Date: Fri, 29 Apr 2011 14:41:10 -0400 From: Charles Marcus <CMarcus(a)Media-Brokers.com> To: dovecot(a)dovecot.org Subject: Re: [Dovecot] Dovecot Folder Creation Problem Message-ID: <4DBB0646.1090700(a)Media-Brokers.com> Content-Type: text/plain; charset=ISO-8859-9 On 2011-04-29 4:04 AM, Ceyhun Ganioglu wrote: > Following some tutorials on > the internet I created an Outlook rule to move the sent emails to the IMAP > server's sent mail folder. Outlook 2007+ no longer requires you to create that rule, you can now just tell it which IMAP folder to save the Sent mail to: http://office.microsoft.com/en-us/outlook-help/change-where-sent-e-mail-mess ages-are-saved-HA010164216.aspx#BM2 -- Best regards, Charles ------------------------------ _______________________________________________ dovecot mailing list dovecot(a)dovecot.org http://dovecot.org/cgi-bin/mailman/listinfo/dovecot End of dovecot Digest, Vol 96, Issue 61 ***************************************

2 1

[Dovecot] listen = ipv4, ipv6
by Leo Baltus 03 May '11

03 May '11

Hi, We want dovecot to listen on a specific ip4 & ipv6 addresses like so: listen = 145.58.1.1, [2a02:458:1::1] But on startup it tells me: Fatal: service(managesieve-login) Can't resolve address [2a02:458:1::1]: Name or service not known Wether it is in the dns or not. If I however change the listen directive to: listen = f.qd.nl where f.qd.nl resolves to an ip4 and ipv6 address dovecot starts up and binds to these ipaddresses the way we expect it. However this makes it depend on DNS which is undesirable. Maybe I am overlooking something, but if not can this be changed so we can configure ipv4 & ipv6 with ip-addresses? -- Leo Baltus, internetbeheerder /\ NPO ICT Internet Services /NPO/\ Sumatralaan 45, 1217 GP Hilversum, Filmcentrum, west \ /\/ beheer(a)omroep.nl, 035-6773555 \/

2 2

[Dovecot] is reverse dns down ?
by Voytek Eymont 03 May '11

03 May '11

Hi guys, is that a genuine email from the list, I'm getting it rejected as it's missing reverse hostname: May 2 21:21:41 postfix/smtpd[18033]: NOQUEUE: reject: RCPT from unknown[194.89.34.45]: 450 4.7.1 Client host rejected: cannot find your reverse hostname, [194.89.34.45]; from=<dovecot-bounces(a)dovecot.org> to=<voytek(a)sbt.net.au> proto=ESMTP helo=<mkentta.iki.fi> # host mkentta.iki.fi mkentta.iki.fi has address 194.89.34.45 mkentta.iki.fi mail is handled by 10 mkentta.iki.fi. mkentta.iki.fi mail is handled by 100 smtp.menturagroup.com. # host 194.89.34.45 Host 45.34.89.194.in-addr.arpa. not found: 3(NXDOMAIN) -- Voytek

5 4

[Dovecot] Warning: SSL is disabled because global ssl=no, ignoring ssl=yes for subsection
by Peter Bell 02 May '11

02 May '11

Hi all, This is my first message to the list. I've been experimenting with running dovecot on my unRAID server (basically, a parity-protected array of disks, running on a slackware 13.1 platform). Someone on the unRAID forum had built a binary distribution of dovecot 1.1.20 and I got this up and running without too much trouble. Today, I've been building the latest dovecot release (2.0.12) and getting this up and running. My biggest problem has been reconstructing the configuration file but, after a few diversions, I'm now back up and running, with access to my mail once more. However, I'm just a little bit miffed that I can't get rid of this warning. My configuration: root@Tower:~# doveconf -n # 2.0.12: /usr/local/etc/dovecot/dovecot.conf doveconf: Warning: SSL is disabled because global ssl=no, ignoring ssl=yes for subsection # OS: Linux 2.6.36.2-unRAID i686 Slackware 13.1.0 fuse.shfs disable_plaintext_auth = no listen = * mail_location = maildir:/mnt/user/Maildir/%u passdb { args = /etc/passwd.dovecot driver = passwd-file } protocols = imap service auth { user = root } service imap-login { inet_listener imap { port = 143 } } ssl = no userdb { args = /etc/passwd.dovecot driver = passwd-file } root@Tower:~# Can someone point me to where the (implicit?) ssl=yes is coming from? In the meantime I will have a play at mail fetching, comparing dumping the mails straight into maildir, with using the dovecote lda. Thanks for any advice. -- ------------------------------------------------------------------- Peter Bell

2 1

[Dovecot] IMAP vs. POP3
by Matt 02 May '11

02 May '11

Does IMAP create much additional system load vs. POP3?

6 5

[Dovecot] 2.0.12 Coredump under Solaris 10
by Denny Schierz 02 May '11

02 May '11

hi, I've installed a testversion from 2.0.12 and getting coredumps after login via IMAP/POP3. I don't know, if it is a simple config error or something else. ====== dovecot: [ID 583609 local7.error] master: Error: service(imap): child 29333 killed with signal 11 (core dumped) [ID 583609 local7.error] master: Error: service(imap): child 29335 killed with signal 11 (core dumped) ====== my configure: CPPFLAGS="-D_POSIX_PTHREAD_SEMANTICS" LDFLAGS="-L/opt/csw/lib -L/usr/lib -R/opt/csw/lib/" ./configure --prefix=/usr/local/dovecot/2.0.12-testinstanz --with-ssl=openssl --with-rundir=/var/run/dovecot-testinstanz --with-storages=maildir,mbox,sdbox,mdbox --with-ldap=yes --sysconfdir=/usr/local/dovecot/etc-testinstanz 2.0.9 works. The gdb coredump shows: gdb ../../dovecot2-testinstanz/libexec/dovecot/imap /var/run/dovecot-testinstanz/core GNU gdb 6.6 Copyright (C) 2006 Free Software Foundation, Inc. GDB is free software, covered by the GNU General Public License, and you are welcome to change it and/or distribute copies of it under certain conditions. Type "show copying" to see the conditions. There is absolutely no warranty for GDB. Type "show warranty" for details. This GDB was configured as "i386-pc-solaris2.8"... Reading symbols from /usr/local/dovecot/2.0.12-testinstanz/lib/dovecot/libdovecot-storage.so.0...done. Loaded symbols for /usr/local/dovecot/2.0.12-testinstanz/lib/dovecot/libdovecot-storage.so.0 Reading symbols from /usr/local/dovecot/2.0.12-testinstanz/lib/dovecot/libdovecot.so.0...done. Loaded symbols for /usr/local/dovecot/2.0.12-testinstanz/lib/dovecot/libdovecot.so.0 Reading symbols from /opt/csw/lib/libiconv.so.2...done. Loaded symbols for /opt/csw/lib//libiconv.so.2 Reading symbols from /lib/libnsl.so.1...done. Loaded symbols for /lib/libnsl.so.1 Reading symbols from /lib/libsocket.so.1...done. Loaded symbols for /lib/libsocket.so.1 Reading symbols from /lib/librt.so.1...done. Loaded symbols for /lib/librt.so.1 Reading symbols from /lib/libsendfile.so.1...done. Loaded symbols for /lib/libsendfile.so.1 Reading symbols from /lib/libc.so.1...done. Loaded symbols for /lib/libc.so.1 Reading symbols from /usr/sfw/lib/libgcc_s.so.1...done. Loaded symbols for /usr/sfw/lib/libgcc_s.so.1 Reading symbols from /lib/libaio.so.1...done. Loaded symbols for /lib/libaio.so.1 Reading symbols from /lib/libmd.so.1...done. Loaded symbols for /lib/libmd.so.1 Reading symbols from /usr/local/dovecot/2.0.12-testinstanz/lib/dovecot/lib01_acl_plugin.so...done. Loaded symbols for /usr/local/dovecot/dovecot2-testinstanz/lib/dovecot//lib01_acl_plugin.so Reading symbols from /lib/libscf.so.1...done. Loaded symbols for /lib/libscf.so.1 Reading symbols from /lib/libdoor.so.1...done. Loaded symbols for /lib/libdoor.so.1 Reading symbols from /lib/libuutil.so.1...done. Loaded symbols for /lib/libuutil.so.1 Reading symbols from /lib/libgen.so.1...done. Loaded symbols for /lib/libgen.so.1 Reading symbols from /lib/libmp.so.2...done. Loaded symbols for /lib/libmp.so.2 Reading symbols from /usr/local/dovecot/2.0.12-testinstanz/lib/dovecot/lib02_imap_acl_plugin.so...done. Loaded symbols for /usr/local/dovecot/dovecot2-testinstanz/lib/dovecot//lib02_imap_acl_plugin.so Reading symbols from /usr/local/dovecot/2.0.12-testinstanz/lib/dovecot/lib10_quota_plugin.so...done. Loaded symbols for /usr/local/dovecot/dovecot2-testinstanz/lib/dovecot//lib10_quota_plugin.so Reading symbols from /usr/local/dovecot/2.0.12-testinstanz/lib/dovecot/lib11_imap_quota_plugin.so...done. Loaded symbols for /usr/local/dovecot/dovecot2-testinstanz/lib/dovecot//lib11_imap_quota_plugin.so Reading symbols from /usr/local/dovecot/2.0.12-testinstanz/lib/dovecot/lib11_trash_plugin.so...done. Loaded symbols for /usr/local/dovecot/dovecot2-testinstanz/lib/dovecot//lib11_trash_plugin.so Reading symbols from /usr/local/dovecot/2.0.12-testinstanz/lib/dovecot/lib15_notify_plugin.so...done. Loaded symbols for /usr/local/dovecot/dovecot2-testinstanz/lib/dovecot//lib15_notify_plugin.so Reading symbols from /usr/local/dovecot/2.0.12-testinstanz/lib/dovecot/lib20_autocreate_plugin.so...done. Loaded symbols for /usr/local/dovecot/dovecot2-testinstanz/lib/dovecot//lib20_autocreate_plugin.so Reading symbols from /usr/local/dovecot/2.0.12-testinstanz/lib/dovecot/lib20_fts_plugin.so...done. Loaded symbols for /usr/local/dovecot/dovecot2-testinstanz/lib/dovecot//lib20_fts_plugin.so Reading symbols from /usr/local/dovecot/2.0.12-testinstanz/lib/dovecot/lib20_listescape_plugin.so...done. Loaded symbols for /usr/local/dovecot/dovecot2-testinstanz/lib/dovecot//lib20_listescape_plugin.so Reading symbols from /usr/local/dovecot/2.0.12-testinstanz/lib/dovecot/lib20_mail_log_plugin.so...done. Loaded symbols for /usr/local/dovecot/dovecot2-testinstanz/lib/dovecot//lib20_mail_log_plugin.so Reading symbols from /usr/local/dovecot/2.0.12-testinstanz/lib/dovecot/lib20_zlib_plugin.so...done. Loaded symbols for /usr/local/dovecot/dovecot2-testinstanz/lib/dovecot//lib20_zlib_plugin.so Reading symbols from /opt/csw/lib/libz.so.1...done. Loaded symbols for /opt/csw/lib//libz.so.1 Reading symbols from /opt/csw/lib/libbz2.so.1.0...done. Loaded symbols for /opt/csw/lib//libbz2.so.1.0 Reading symbols from /lib/ld.so.1...done. Loaded symbols for /lib/ld.so.1 Core was generated by `dovecot/imap'. Program terminated with signal 11, Segmentation fault. #0 0xfeb559f8 in strcmp () from /lib/libc.so.1 The same from pop3 after entering username/password ======= config ========= /usr/local/dovecot/dovecot2-testinstanz/sbin/dovecot -n # 2.0.12: /usr/local/dovecot/etc-testinstanz/dovecot/dovecot.conf # OS: SunOS 5.10 i86pc zfs auth_debug = yes auth_username_format = %Lu auth_verbose = yes debug_log_path = /var/log/dovecot-testinstanz-debug.log disable_plaintext_auth = no hostname = xfire05.rbg.informatik.tu-darmstadt.de info_log_path = /var/log/dovecot-testinstanz.log lda_mailbox_autocreate = yes login_greeting = I'm alive for testing mail_debug = yes mail_gid = vmail mail_home = /imap/spool/%d/%1n/%n mail_location = maildir:/imap/spool/%d/%1n/%n:INDEX=/imap/spool/% d/indexes/%1n/%n mail_plugin_dir = /usr/local/dovecot/dovecot2-testinstanz/lib/dovecot/ mail_plugins = acl quota fts mail_privileged_group = vmail mail_temp_dir = /imap/spool/tmp mail_uid = vmail managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date imapflags namespace { hidden = no inbox = yes location = prefix = separator = / subscriptions = yes type = private } namespace { inbox = no location = maildir:/imap/spool/public prefix = public/ separator = / subscriptions = no type = public } passdb { args = /usr/local/dovecot/etc-testinstanz/dovecot/conf.d/dovecot-ldap.conf.ext driver = ldap } passdb { args = scheme=plain-md5 username_format=% Lu /usr/local/dovecot/etc-testinstanz/dovecot/other-domain-users driver = passwd-file } plugin { acl = vfile:/imap/spool/%d/acl autocreate = Sent autocreate2 = Drafts autocreate3 = Trash autocreate4 = Spam autosubscribe = Sent autosubscribe2 = Drafts autosubscribe3 = Trash autosubscribe4 = Spam fts = squat fts_squat = partial=4 full=10 quota = maildir:User quota quota_rule2 = Trash:storage=+10%% quota_rule3 = Spam:storage=+20%% quota_warning = storage=80% % /usr/local/dovecot/dovecot2/bin/quota-warning.sh 80 quota_warning2 = storage=90% % /usr/local/dovecot/dovecot2/bin/quota-warning.sh 90 quota_warning3 = storage=95% % /usr/local/dovecot/dovecot2/bin/quota-warning.sh 95 sieve = /imap/spool/%d/%1n/%n/sieve/default.sieve sieve_dir = /imap/spool/%d/%1n/%n/sieve sieve_extensions = +imapflags trash = /usr/local/dovecot/etc-testinstanz/dovecot/conf.d/dovecot-trash.conf } postmaster_address = postmaster(a)domain.foo protocols = imap pop3 sieve service auth { unix_listener /var/spool/postfix/private/auth-testinstanz { group = postdrop mode = 0600 user = postfix } } service imap-login { inet_listener imap { port = 1433 } inet_listener imaps { port = 9933 ssl = yes } process_min_avail = 8 vsz_limit = 1 G } service lmtp { unix_listener /var/spool/postfix/private/dovecot-testinstanz-lmtp { group = postdrop mode = 0666 user = postfix } } service managesieve-login { inet_listener sieve { port = 41900 } inet_listener sieve_deprecated { port = 20011 } } service pop3-login { inet_listener pop3 { port = 1100 } inet_listener pop3s { port = 9955 ssl = yes } } ssl_cert = </usr/local/dovecot/etc-testinstanz/dovecot/ssl/imapd.pem ssl_key = </usr/local/dovecot/etc-testinstanz/dovecot/ssl/imapd.pem syslog_facility = local7 userdb { args = /usr/local/dovecot/etc-testinstanz/dovecot/conf.d/dovecot-ldap.conf.ext driver = ldap } userdb { args = username_format=% Lu /usr/local/dovecot/etc-testinstanz/dovecot/other-domain-users driver = passwd-file } verbose_proctitle = yes protocol lda { mail_plugins = acl quota fts sieve quota fts fts_squat } protocol imap { imap_idle_notify_interval = 2 mins mail_max_userip_connections = 10 mail_plugins = acl quota fts fts_squat imap_acl imap_quota mail_log notify autocreate trash listescape fts fts_squat zlib } protocol lmtp { mail_plugins = acl quota fts fts_squat sieve } protocol pop3 { mail_plugins = acl quota fts quota fts fts_squat pop3_client_workarounds = outlook-no-nuls oe-ns-eoh pop3_reuse_xuidl = yes } I'm changed several paths to make my "update way" easier with testing the new release before change the production version. Maybe, there are some typos ... cu denny

2 6

[Dovecot] dict quota problem
by Papp Tamas 01 May '11

01 May '11

hi! In table I see this: | papp.tamas(a)center.hu | 118671994 | 20437 | du -sm says, the size of the maildir is 154M. I use xfs. I can't figure out, why is there a difference. Can you help me out? Thank you, tamas

3 11

[Dovecot] dovecot.org broken
by Timo Sirainen 01 May '11

01 May '11

Serving it temporarily from a machine in my home. I'll move it to better hosting in a few days. And I guess I should make it more fail safe some day soon.. Lets see if mailman happens to work now.

8 11

[Dovecot] calling dovecot exported auth from Java
by WJCarpenter 30 Apr '11

30 Apr '11

As far as I have been able to figure out, dovecot auth always works over a Unix domain socket. I believe it is not currently possible to operate dovecot auth over an Internet domain (TCP) socket. Am I correct? I want to call dovecot's exported authentication from a Java application. Java doesn't natively know how to talk to a Unix domain socket, so there are inconveniences. There are 3rd party JNI libraries to allow Java to do it, but I'm not too wild about the idea of using JNI. My current thinking is to rig up some kind of proxy/shuttle arrangement between a localhost TCP port and the dovecot auth Unix domain socket in the filesystem. I'm looking at using the more or less standard tool "socat" to do that. ('m on a mainstream Linux distribution.) Has anyone else confronted and solved this problem? Do tell us the details .... :-) TIA!

2 3

[Dovecot] linking problems of dovecot 2.0.3
by Funda Wang 30 Apr '11

30 Apr '11

Hello, I'm currently packaging dovecot 2.0.3 under Mandriva Linux. It has been using LDFLAGS="-Wl,--as-needed -Wl,--no-undefined" for shared libraries for over two years[1]. And I've found there are lots of linking problems with dovecot 2.0.3. After some investigation, I've made small patch regarding dovecot 2.0.3, posted here: http://svn.mandriva.com/cgi-bin/viewvc.cgi/packages/cooker/dovecot/branches… Even after applying mentioned patch, it still produce following errors: make[3]: Entering directory `/tmp/dovecot/BUILD/dovecot-2.0.3/src/login-common' /bin/sh ../../libtool --tag=CC --mode=link gcc -std=gnu99 -O2 -g -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fstack-protector-all -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -Wstrict-aliasing=2 -export-dynamic -Wl,--as-needed -Wl,--no-undefined -Wl,-z,relro -Wl,-O1 -Wl,--build-id -o libdovecot-login.la -rpath /usr/lib64/dovecot liblogin.la ../lib-dict/libdict.la ../lib-dovecot/libdovecot.la -lrt libtool: link: gcc -shared -Wl,--as-needed -Wl,--whole-archive ./.libs/liblogin.a ../lib-dict/.libs/libdict.a -Wl,--no-whole-archive -Wl,--as-needed -Wl,--no-undefined -Wl,-z -Wl,relro -Wl,-O1 -Wl,--build-id -Wl,-rpath -Wl,/tmp/dovecot/BUILD/dovecot-2.0.3/src/lib-dovecot/.libs -Wl,-rpath -Wl,/usr/lib64/dovecot -L/usr/lib64/ -lssl -lcrypto -ldl -lpthread ../lib-dovecot/.libs/libdovecot.so -lrt -Wl,-soname -Wl,libdovecot-login.so.0 -o .libs/libdovecot-login.so.0.0.0 ./.libs/liblogin.a(client-common.o): In function `get_var_expand_table': /tmp/dovecot/BUILD/dovecot-2.0.3/src/login-common/client-common.c:372: undefined reference to `login_binary' ./.libs/liblogin.a(client-common.o): In function `client_create': /tmp/dovecot/BUILD/dovecot-2.0.3/src/login-common/client-common.c:50: undefined reference to `client_vfuncs' ./.libs/liblogin.a(client-common-auth.o): In function `client_auth_parse_args': /tmp/dovecot/BUILD/dovecot-2.0.3/src/login-common/client-common-auth.c:111: undefined reference to `login_binary' /tmp/dovecot/BUILD/dovecot-2.0.3/src/login-common/client-common-auth.c:99: undefined reference to `login_binary' ./.libs/liblogin.a(client-common-auth.o): In function `client_auth_begin': /tmp/dovecot/BUILD/dovecot-2.0.3/src/login-common/client-common-auth.c:491: undefined reference to `login_binary' ./.libs/liblogin.a(login-settings.o): In function `login_settings_read': /tmp/dovecot/BUILD/dovecot-2.0.3/src/login-common/login-settings.c:195: undefined reference to `login_binary' ./.libs/liblogin.a(main.o): In function `login_access_lookup_next': /tmp/dovecot/BUILD/dovecot-2.0.3/src/login-common/main.c:185: undefined reference to `login_binary' ./.libs/liblogin.a(main.o):/tmp/dovecot/BUILD/dovecot-2.0.3/src/login-common/main.c:338: more undefined references to `login_binary' follow ./.libs/liblogin.a(main.o): In function `main': /tmp/dovecot/BUILD/dovecot-2.0.3/src/login-common/main.c:358: undefined reference to `login_process_preinit' ./.libs/liblogin.a(main.o): In function `main_init': /tmp/dovecot/BUILD/dovecot-2.0.3/src/login-common/main.c:308: undefined reference to `clients_init' ./.libs/liblogin.a(main.o): In function `main_deinit': /tmp/dovecot/BUILD/dovecot-2.0.3/src/login-common/main.c:317: undefined reference to `clients_deinit' ./.libs/liblogin.a(sasl-server.o): In function `anvil_check_too_many_connections': /tmp/dovecot/BUILD/dovecot-2.0.3/src/login-common/sasl-server.c:187: undefined reference to `login_binary' collect2: ld returned 1 exit status Could somebody take a look? Thanks. [1]: http://wiki.mandriva.com/en/Underlinking

2 6

Re: [Dovecot] Help a newbie...
by Patrick Westenberg 29 Apr '11

29 Apr '11

The config files are well commented. Take a look... Patrick

1 0

[Dovecot] Help a newbie...
by Juan Bernhard 29 Apr '11

29 Apr '11

Hi every one! Im new to the list, and to dovecot. I foud this program very usefull, scalable and with a serious security focus. So Im trying to implement it here at work. The first logical step is to read as much as I can, to build the best possible configuration avaible... but i found that the wiki es a pour source of serious information, filled with examples... examples are great to learn, but I was loocking for something that describes every dovecot.conf option (for example: mail_location = *string* default: mbox:~/mail:INBOX=/var/mail/%u bla,bla,bla...) Or perhaps some one can give me some directions to start reading... any help will be great. Thank you! PD: sorry for my english! haha -- ________________________________________ Juan Bernhard INSTITUTO NACIONAL DE TECNOLOGÍA INDUSTRIAL DEPARTAMENTO DE INFORMÁTICA DIVISIÓN OPERACIONES Teléfono (54 11) 4724-6200 / 6300 / 6400 Interno 6739 juan(a)inti.gob.ar _______________________________________ 0800 444 4004 | www.inti.gob.ar

1 0

[Dovecot] Dovecot Folder Creation Problem
by Ceyhun Ganioglu 29 Apr '11

29 Apr '11

Hi all, I installed Dovecot-Postfix as an IMAP mail server and also RoundCube as webmail. When I create an account using Postfix Admin and login to webmail, roundCube creates the Junk Mail, Deleted Emails folder automatically. I also added this account to my Microsoft Outlook 2007. Following some tutorials on the internet I created an Outlook rule to move the sent emails to the IMAP server's sent mail folder. When I send an email, the email disappears from the default sent items of Outlook but it doesn't appear on the IMAP server's sent items folder. Do I have to set some kind of other permissions on the IMAP server to fix this problem? My version of Dovecot is 1.2.16. I want my clients use Microsoft Outlook and reach all received and sent emails via webmail anywhere they go. Many thanks Ceyhun

3 2

[Dovecot] Problem Authenticating with Master User
by Henry Franco 29 Apr '11

29 Apr '11

Dovecot provides a master login (a master user name and password that can log into all user accounts). I've setup Dovecot as per: http://wiki1.dovecot.org/Authentication/MasterUsers Here's my problem. The only way I can authenticate successfully is if I try to authenticate through telnet twice. Also, imapsync (the tool I need to use to migrate over emails from Dovecot to other mail server) won't work because of this. $ telnet mail01.server.com 143 Trying 10.10.10.12... Connected to mail01.server.com. Escape character is '^]'. * OK Dovecot ready. 1 login user(a)server.com*master my_password 1 NO Authentication failed. 1 login user(a)server.com*master my_password 1 OK Logged in.

3 6

[Dovecot] Re-downloading mails after migrate server
by Esther Yébenes --Conzentra-- 29 Apr '11

29 Apr '11

Hi all, first of all, I must say that I am pretty new to mailing lists, so please, if I do something wrong, just tell me. Now, my problem. I'm migrating a mail service from a temporal to a definitive server. Both servers have the same versions (Postfix, Dovecot -1.0.7, POP3 & IMAP services-, MySQL) and it all works perfectly. The only problem is with the users that store their mail on the server; on the testing, when I check if there is new mail, I download the mail stored on the new server once more. After that, it works correctly (no more unwanted downloads), but I need to avoid that first download. I have been investigating before writing to the list. I have checked that UIDL are the same on both servers, and the configuration is exactly the same except for the name of the server; I have seen in few places that it may be the cause for downloading thdovecote mail again, so I changed the name of the new server to the old's one, but it happened again. I know that lots of servers are migrated every day, and never heard about those problems, so I suppose it must be a solution for this, or maybe a better way to configure the servers. If you wanna take a look at the configuration of both servers, I have pasted them on here --> http://pastebin.ca/2051228 Please, let me now if you need any more information. Thanks in advance -- Esther Yébenes esther.yebenes(a)conzentra.com <mailto:esther.yebenes@conzentra.com> Tel. +34 93 412 3750. Ext. 306 Fax. +34 902 889 440 Conzentra your internet bussines partner www.conzentra.com <http://www.conzentra.com>

4 7

[Dovecot] [dovecot] Question about master user and PAM with dovecot 2.0.12
by Jonathan Siegle 29 Apr '11

29 Apr '11

Is it possible to allow master users to be authenticated against PAM? Something like: passdb { driver = pam #args = /etc/dovecot/passwd.masterusers master = yes #pass = yes } and then have a userdb which qualifies what accounts are master accounts but doesn't have passwords? Thanks, Jonathan

2 1

Re: [Dovecot] Dovecot Folder Creation Problem
by Ceyhun Ganioglu 29 Apr '11

29 Apr '11

Hi Robert, Many thanks for your reply. I realized that the title of my email was not explaining my exact problem. My problem is not the creation of the folders. I am happy with the folders created by RoundCube. I am confused why Outlook can't write to the Sent Items folder. Logically Outlook, TB or any other email client must have permission to write the sent mails to the chosen sent mail folder on an IMAP server without any problems. Am I wrong? Thanks Ceyhun Date: Fri, 29 Apr 2011 12:08:05 +0200 From: Robert Schetterer <robert(a)schetterer.org> To: dovecot(a)dovecot.org Subject: Re: [Dovecot] Dovecot Folder Creation Problem Message-ID: <4DBA8E05.6040600(a)schetterer.org> Content-Type: text/plain; charset=ISO-8859-9 Am 29.04.2011 10:04, schrieb Ceyhun Ganioglu: > Hi all, > > > > I installed Dovecot-Postfix as an IMAP mail server and also RoundCube as > webmail. When I create an account using Postfix Admin and login to webmail, > roundCube creates the Junk Mail, Deleted Emails folder automatically. I also > added this account to my Microsoft Outlook 2007. Following some tutorials on > the internet I created an Outlook rule to move the sent emails to the IMAP > server's sent mail folder. When I send an email, the email disappears from > the default sent items of Outlook but it doesn't appear on the IMAP server's > sent items folder. > > > > Do I have to set some kind of other permissions on the IMAP server to fix > this problem? My version of Dovecot is 1.2.16. > > > > I want my clients use Microsoft Outlook and reach all received and sent > emails via webmail anywhere they go. > > > > Many thanks > > Ceyhun > > you should choose one default folder layout , and autocreate and autosubscribe it with dovecot, i would recommend to use thunderbird default folder layout, as TB works on all major plattforms then configure your clients to use these default folders should be no problem with roundcube, in outlook 2010 this works without the outlook spam folder, in windows you can use reg patches gpo etc to auto configure folder setup with outlook, but the truth is at recent you will not goal a valid default auto folder configuration for all imap clients you can only workaround it -- Best Regards MfG Robert Schetterer Germany/Munich/Bavaria ------------------------------ _______________________________________________ dovecot mailing list dovecot(a)dovecot.org http://dovecot.org/cgi-bin/mailman/listinfo/dovecot End of dovecot Digest, Vol 96, Issue 59 ***************************************

3 2

[Dovecot] how to limit size of dovecot.log
by Aaron C Johnson 29 Apr '11

29 Apr '11

I've done some searching and maybe I'm missing something... I have a remote dovecot and postfix server running on debian 5. I then have a local fetchmail server that retrieves email from the dovecot server via pop3s every 5 minutes. The problem is that the /var/log/dovecot.log file has grown to be over 1.1GiB over a period of less than 1 year. Is there a way to limit the size of the dovecot.log file, or do I have to run a monthly cron job or something to take care of it for me? Thank you, Aaron Johnson

3 2

[Dovecot] Segmentation Fault in doveadm move under Solaris 10
by Jürgen Obermann 28 Apr '11

28 Apr '11

Hi all I want to move mails from folder test-ein to another folder test-aus with the new "doveadm move" command in dovecot 2.0.12. When I try the following I get a "Segmentation Fault" after the mail was copied to the new folder: # doveadm -v -f flow search -u g033 mailbox test-ein all 56779e33a911b84db22900005451a966 1 # doveadm -v -f flow search -u g033 mailbox test-aus all # doveadm -v -f flow move -u g033 test-aus mailbox test-ein all Segmentation Fault # doveadm -v -f flow search -u g033 mailbox test-aus all 57779e33a911b84db22900005451a966 26 # doveadm -v -f flow search -u g033 mailbox test-ein all 56779e33a911b84db22900005451a966 1 The mail now is in both the source folder and the destination folder. With truss under Solaris 10 we can see what happens (only the last few lines are shown): open64("/home/hrz/g033/Mail/test-ein", O_RDWR) = 12 fstat64(12, 0xFFBFEBA0) = 0 time() = 1303911414 alarm(5) = 0 fcntl(12, F_SETLKW64, 0xFFBFED38) = 0 alarm(0) = 5 stat64("/home/hrz/g033/Mail/test-ein", 0xFFBFEF80) = 0 stat64("/home/hrz/g033/Mail/.imap/test-ein/dovecot.index.log", 0xFFBFEA28) = 0 pread64(11, 0x00083090, 8192, 4440) = 0 stat64("/home/hrz/g033/Mail/.imap/test-ein/dovecot.index.log", 0xFFBFEEC0) = 0 pread64(11, 0x00083090, 8192, 4440) = 0 fstat64(12, 0xFFBFF1F0) = 0 brk(0x00092498) = 0 brk(0x00094498) = 0 pread64(12, " F r o m O l i v e r .".., 8192, 0) = 5135 open("/var/run/tzsync", O_RDONLY) = 13 mmap(0x00000000, 4, PROT_READ, MAP_SHARED, 13, 0) = 0xFF250000 close(13) = 0 brk(0x00094498) = 0 brk(0x00096498) = 0 open("/usr/share/lib/zoneinfo/MET", O_RDONLY) = 13 fstat64(13, 0xFFBFEE68) = 0 read(13, " T Z i f\0\0\0\0\0\0\0\0".., 765) = 765 close(13) = 0 stat64("/home/hrz/g033/Mail/.imap/test-ein/dovecot.index.log", 0xFFBFEE58) = 0 pread64(11, 0x00083090, 8192, 4440) = 0 brk(0x00096498) = 0 brk(0x00098498) = 0 open64("/home/hrz/g033/Mail/.imap/test-ein/dovecot.index.cache", O_RDWR) = 13 fstat64(13, 0xFFBFF060) = 0 mmap64(0x00000000, 57344, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANON, -1, 0) = 0xFEC90000 pread64(13, "01\b\0\0 MB811C2 MB811C2".., 8192, 0) = 8192 pread64(13, "808080D0\0\0011F\0\0\0\r", 12, 32) = 12 pread64(13, "80808998\0\001 8\0\0\00E", 12, 320) = 12 pread64(13, "80808DB6\0\001 N\0\0\00F", 12, 4704) = 12 pread64(13, "\0\0\0\0\0\002A1\0\0\01D", 12, 6872) = 12 pread64(13, "01\b\0\0 MB811C2 MB811C2".., 8192, 0) = 8192 pread64(13, " c h r i c h t " " q u".., 8192, 24576) = 8192 pread64(13, "\0\0\0\0\0\0\0\0\0\0\0\0".., 8192, 32768) = 8192 pread64(13, " l e r " < K a r l - H".., 8192, 8192) = 8192 time() = 1303911414 time() = 1303911414 time() = 1303911414 lstat64("/home/hrz/g033/Mail/test-aus.lock", 0xFFBFED28) Err#2 ENOENT open64("/home/hrz/g033/Mail/test-aus.lock", O_RDWR|O_CREAT|O_EXCL, 0666) = 14 write(14, " 8 8 2 2 : f t p s e r v", 12) = 12 fdsync(14, FDSYNC) = 0 fstat64(14, 0xFFBFEE68) = 0 close(14) = 0 lstat64("/home/hrz/g033/Mail/test-aus.lock", 0xFFBFEFC8) = 0 open64("/home/hrz/g033/Mail/test-aus", O_RDWR) = 14 fstat64(14, 0xFFBFEF40) = 0 time() = 1303911414 alarm(5) = 0 fcntl(14, F_SETLKW64, 0xFFBFF120) = 0 alarm(0) = 5 stat64("/home/hrz/g033/Mail/test-aus", 0xFFBFF208) = 0 stat64("/home/hrz/g033/Mail/.imap/test-aus/dovecot.index.log", 0xFFBFECF0) = 0 pread64(9, 0x0007622C, 8192, 8484) = 0 stat64("/home/hrz/g033/Mail/test-aus", 0xFFBFEF38) = 0 stat64("/home/hrz/g033/Mail/.imap/test-aus/dovecot.index.log", 0xFFBFE9E0) = 0 pread64(9, 0x0007622C, 8192, 8484) = 0 stat64("/home/hrz/g033/Mail/.imap/test-aus/dovecot.index.log.2", 0xFFBFEBF8) Err#2 ENOENT alarm(180) = 0 fcntl(9, F_SETLKW64, 0xFFBFEBA0) = 0 alarm(0) = 180 time() = 1303911414 rmdir("/home/hrz/g033/Mail/.imap/test-aus") Err#17 EEXIST stat64("/home/hrz/g033/Mail/.imap/test-aus/dovecot.index.log", 0xFFBFECF8) = 0 pread64(9, 0x0007622C, 8192, 8484) = 0 time() = 1303911414 fcntl(9, F_SETLK64, 0xFFBFED68) = 0 stat64("/home/hrz/g033/Mail/.imap/test-aus/dovecot.index.log", 0xFFBFEE10) = 0 pread64(9, 0x0007622C, 8192, 8484) = 0 fstat64(14, 0xFFBFF208) = 0 llseek(14, 5671, SEEK_SET) = 5671 read(14, "\n", 1) = 1 fstat64(14, 0xFFBFF208) = 0 brk(0x00098498) = 0 brk(0x0009A498) = 0 brk(0x0009A498) = 0 brk(0x0009C498) = 0 brk(0x0009C498) = 0 brk(0x0009E498) = 0 open64("/home/hrz/g033/Mail/.imap/test-aus/dovecot.index.cache", O_RDWR) = 15 fstat64(15, 0xFFBFEF28) = 0 mmap64(0x00000000, 57344, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANON, -1, 0) = 0xFEC80000 pread64(15, "01\b\0\0 MB811D4 MB811D4".., 8192, 0) = 8192 pread64(15, "808080D0\0\0011F\0\0\0\r", 12, 32) = 12 pread64(15, "80808998\0\001 8\0\0\00E", 12, 320) = 12 pread64(15, "80808DBA\0\001 N\0\0\00F", 12, 4704) = 12 pread64(15, "\0\0\0\0\0\002A1\0\0\01D", 12, 6888) = 12 pread64(15, "01\b\0\0 MB811D4 MB811D4".., 8192, 0) = 8192 brk(0x0009E498) = 0 brk(0x000A0498) = 0 pread64(12, " X - S p a m - C h e c k".., 8192, 65) = 5070 brk(0x000A0498) = 0 brk(0x000A2498) = 0 brk(0x000A2498) = 0 brk(0x000AA498) = 0 pread64(12, 0x00092D26, 3122, 5135) = 0 pread64(12, 0x00092D26, 3122, 5135) = 0 pread64(12, 0x00092D26, 3122, 5135) = 0 pread64(12, 0x00092D26, 3122, 5135) = 0 pread64(12, 0x00092D26, 3122, 5135) = 0 pread64(12, 0x00092D26, 3122, 5135) = 0 write(14, " F r o m O l i v e r .".., 5101) = 5101 pwrite64(14, "\n C o n t e n t - L e n".., 21, 7666) = 21 pread64(12, 0x00092D26, 3122, 5135) = 0 Incurred fault #6, FLTBOUNDS %pc = 0xFEE32370 siginfo: SIGSEGV SEGV_MAPERR addr=0x00000000 Received signal #11, SIGSEGV [default] siginfo: SIGSEGV SEGV_MAPERR addr=0x00000000 Greetings, Juergen -- Hochschulrechenzentrum der | Mail: Juergen.Obermann(a)hrz.uni-giessen.de Justus-Liebig-Universitaet | WWW: http://www.uni-giessen.de/obermann/ Heinrich-Buff-Ring 44 | Tel: 0641-99-13054 (0641-99-13001) D-35392 Giessen, Germany | Fax: 0641-99-13009

2 3

[Dovecot] Isilon OneFS storage
by list＠airstreamcomm.net 28 Apr '11

28 Apr '11

I am wondering if anyone has any experience with the Isilon OneFS storage system (http://www.isilon.com/) using NFS to host storage for Dovecot. Thanks

1 0

[Dovecot] Outlook Calendar Connector Question
by Jake Johnson 28 Apr '11

28 Apr '11

Is there a freeware or opensource calendar connector that will work with Dovecot? Any suggestions would be appreciated. Thanks.

4 3

[Dovecot] dovecot lda aliases doesn't work
by Selcuk MIYNAT 28 Apr '11

28 Apr '11

Hi, I am trying to use dovecot as lda. I have put this line in my .qmail-default file: #|/var/qmail/bin/preline -f /usr/local/libexec/dovecot/dovecot-lda -d $EXT@$USER It is working correct with real addresses but couldn't find forwarding addresses. This is my /usr/local/etc/dovecot-sql.conf: driver = mysql connect = host=localhost user=vpopmailuser password=vpopmailpassword dbname=vpopmail default_pass_scheme = PLAIN password_query = SELECT CONCAT(pw_name, '@', pw_domain) AS user, pw_clear_passwd AS password FROM vpopmail WHERE pw_name = '%n' AND pw_domain = '%d' user_query = SELECT pw_dir as home, 89 AS uid, 89 AS gid FROM vpopmail WHERE pw_name = '%n' AND pw_domain = '%d' It is querying vpopmail table all the time but forwarding addresses are in the valias table, so it couldn't find forwarding addresses. How can I solve this? -- Selcuk MIYNAT Endersys Ltd. Sistem Destek Muhendisi / System Support Engineer Phone : +90 216-4709423 | Fax : +90 216-4709508 Web : http://www.endersys.com.tr Blog : http://blog.endersys.com Twitter : http://www.twitter.com/endersys LPI : The #1 Linux Certification for IT Professionals LPI (Linux Professional Institute) Turkey http://www.lpi-turkey.com Endersys is the first Advanced Business Partner of Red Hat in Turkey ! http://www.europe.redhat.com/partners/endersys/

2 1

[Dovecot] What is the recommended way to move a message from one mailbox to another using CLI
by Uffe Jakobsen 27 Apr '11

27 Apr '11

What is the recommended way to move a message from one mailbox to another using CLI - serverside commands ? Since IMAP does not support transactional moves between mailboxes - The only thing that comes to my mind is this operation: 1) extract message from mailbox A using "doveadm fetch" 2) inject message into mailbox B using "dovecot-lda" 3) expunge message from mailbox A using "doveadm expunge" it this the right solution ? One problem with above approach is that injecting through "dovecot-lda" will trigger the sieve script - which I'm not interested in since the message have already been injected and processed once before - at delivery... Any advice is much welcome -- View this message in context: http://old.nabble.com/What-is-the-recommended-way-to-move-a-message-from-on… Sent from the Dovecot mailing list archive at Nabble.com.

3 3

[Dovecot] What is the recommended way to delete a message from a mailbox ?
by Uffe Jakobsen 27 Apr '11

27 Apr '11

Hi, I'm implementing a shell-script (pseudo) solution to the missing IMAP Outbox feature in Dovecot (Courier IMAP feature http://www.inter7.com/courierimap/INSTALL.html#imapsend) In order to remove the message from the Outbox once it is sent I have a question: What is the recommended way to delete a message from a mailbox (from an "external" server side program - such as a shell script) ? Can I just remove the file from the mailbox - I cannot seem to find any doveadm commands that does this task. I guess that Dovecot over time will discover that the atime and mtime of its indexes and maps does not reflect reality - or is there another (better) way to delete a message. Thanks Uffe -- View this message in context: http://old.nabble.com/What-is-the-recommended-way-to-delete-a-message-from-… Sent from the Dovecot mailing list archive at Nabble.com.

2 2

Re: [Dovecot] dovecot & OCFS2 Cluster
by Joseph Tam 27 Apr '11

27 Apr '11

Robert Schetterer <robert(a)schetterer.org> writes: >> Anyway, why use lmtp over lda ? > > i.e avoid backscatter by overquota A clarification on this: backscatter (or rather, ambiguous NDR notices that claim many users are over quota rather than just one) is a result of a local mailer that support multiple recipient delivery in one invocation, but can only return one result code to the MTA. Since Dovecot's deliver-lda does not support multiple recipient delivery, this is not a problem. LMTP can support multiple deliveries of the same message per invocation, but replies with individual SMTP codes to avoid the above problem. It can take advantage of this to efficiently implement single instance storage if it is enabled. > performance should better too Apart from multiple deliveries or SIS, I'm not sure this is true, or significant if it were. Joseph Tam <jtam.home(a)gmail.com>

3 2

[Dovecot] logs show two connections to database even though using static driver
by Gary Chodos 27 Apr '11

27 Apr '11

hi, im using: --- passdb { driver = sql args = /etc/dovecot/dovecot-sql.conf.ext } userdb { driver = static args = uid=vmail gid=vmail home=/home/vmail/%d/ mail=mdbox:/home/vmail/%d/%n } -- this works fine on a test machine but i still see *2* instead of 1 connections to the pgsql db before a successful login is logged.. how can i avoid these extra connections?: Apr 17 11:34:49 merlin dovecot: auth: pgsql(localhost): Connected to database users Apr 17 11:34:50 merlin dovecot: auth: pgsql(localhost): Connected to database users Apr 17 11:34:50 merlin dovecot: imap-login: Login: user=<gary(a)example.org>, ...

2 2

[Dovecot] Why is my quota warning script not getting executed?
by Darek M 27 Apr '11

27 Apr '11

Storing my users and quota in MySQL,running Dovecot 1.2.16, and followed the page at http://wiki1.dovecot.org/Quota/Dict I'm burning my eyes trying to find any syntax issues but can't. I'm including output of dovecot -n and the quota2 table schema below. dovecot.conf: ========== dict { quotadict = mysql:/usr/local/etc/postfix/dovecot-dict-sql.conf } plugin { quota = dict:emailaccount::proxy::quotadict quota_warning95 = storage=95%% /usr/local/bin/dovecot-quota-warning.sh 95 quota_warning90 = storage=90%% /usr/local/bin/dovecot-quota-warning.sh 90 quota_warning80 = storage=80%% /usr/local/bin/dovecot-quota-warning.sh 80 } /usr/local/etc/postfix/dovecot-dict-sql.conf: =============================== # v1.2+ only: connect = host=/tmp/mysql.sock dbname=postfix user=postfix password=**** map { pattern = priv/quota/storage table = quota2 username_field = username value_field = bytes } map { pattern = priv/quota/messages table = quota2 username_field = username value_field = messages } A log of 90% being passed: # vuserinfo darek(a)domain.com Email: darek(a)domain.com Name: Darek Maildir: domain.com/darek/ Created: 2011-04-11 18:08:05 Modified: 2011-04-25 17:30:26 Quota: 25,000K (24.41M) Used: 21,380.29K (20.88M) Usage: 85.52% Apr 26 11:57:53 deliver(darek(a)domain.com): Info: Loading modules from directory: /usr/local/lib/dovecot/lda Apr 26 11:57:53 deliver(darek(a)domain.com): Info: Module loaded: /usr/local/lib/dovecot/lda/lib10_quota_plugin.so Apr 26 11:57:53 deliver(darek(a)domain.com): Info: Module loaded: /usr/local/lib/dovecot/lda/lib90_sieve_plugin.so Apr 26 11:57:53 deliver(darek(a)domain.com): Info: auth input: home=/home/vmail/domain.com/darek/ Apr 26 11:57:53 deliver(darek(a)domain.com): Info: auth input: mail=maildir:/home/vmail/domain.com/darek/ Apr 26 11:57:53 deliver(darek(a)domain.com): Info: auth input: uid=5000 Apr 26 11:57:53 deliver(darek(a)domain.com): Info: auth input: gid=5000 Apr 26 11:57:53 deliver(darek(a)domain.com): Info: auth input: quota_rule=*:bytes=25600000 Apr 26 11:57:53 deliver(darek(a)domain.com): Info: Quota root: name=emailaccount backend=dict args=:proxy::quotadict Apr 26 11:57:53 deliver(darek(a)domain.com): Info: Quota rule: root=emailaccount mailbox=* bytes=25600000 messages=0 Apr 26 11:57:53 deliver(darek(a)domain.com): Info: dict quota: user=darek(a)domain.com, uri=proxy::quotadict, noenforcing=0 Apr 26 11:57:53 deliver(darek(a)domain.com): Info: maildir: data=/home/vmail/domain.com/darek/ Apr 26 11:57:53 deliver(darek(a)domain.com): Info: maildir++: root=/home/vmail/domain.com/darek, index=, control=, inbox=/home/vmail/domain.com/darek Apr 26 11:57:53 deliver(darek(a)domain.com): Info: dict quota: user=darek(a)domain.com, uri=proxy::quotadict, noenforcing=0 Apr 26 11:57:53 deliver(darek(a)domain.com): Info: sieve: user's script path /home/vmail/domain.com/darek/sieve/darek(a)domain.com.sieve doesn't exist (using global script path in stead) Apr 26 11:57:53 deliver(darek(a)domain.com): Info: sieve: user has no valid personal script Apr 26 11:57:53 deliver(darek(a)domain.com): Info: sieve: no scripts to execute: reverting to default delivery. Apr 26 11:57:53 deliver(darek(a)domain.com): Info: Namespace : Using permissions from /home/vmail/domain.com/darek: mode=0700 gid=-1 Apr 26 11:57:53 dict: Info: mysql: Connected to /tmp/mysql.sock (postfix) Apr 26 11:57:53 deliver(darek(a)domain.com): Info: msgid=<4DB6EB69.5010501(a)server.net>: saved mail to INBOX # vuserinfo darek(a)domain.com Email: darek(a)domain.com Name: Darek Maildir: domain.com/darek/ Created: 2011-04-11 18:08:05 Modified: 2011-04-25 17:30:26 Quota: 25,000K (24.41M) Used: 23,000.09K (22.46M) Usage: 92.00% Output of 'dovecot -n': ================ # 1.2.16: /usr/local/etc/dovecot.conf # OS: FreeBSD 8.2-RELEASE i386 ufs log_path: /var/log/dovecot/dovecot-err.log info_log_path: /var/log/dovecot/dovecot-info.log protocols: imap imaps pop3 pop3s managesieve listen: , [::] ssl_cert_file: /etc/ssl/dovecot/certs/dovecot.pem ssl_key_file: /etc/ssl/dovecot/private/dovecot.pem disable_plaintext_auth: no nfs_check: no version_ignore: yes login_dir: /var/run/dovecot/login login_executable(default): /usr/local/libexec/dovecot/imap-login login_executable(imap): /usr/local/libexec/dovecot/imap-login login_executable(pop3): /usr/local/libexec/dovecot/pop3-login login_executable(managesieve): /usr/local/libexec/dovecot/managesieve-login login_process_per_connection: no login_processes_count: 10 first_valid_uid: 5000 last_valid_uid: 5000 first_valid_gid: 5000 last_valid_gid: 5000 mail_uid: 5000 mail_gid: 5000 mail_location: maildir:/home/vmail/%d/%n mail_debug: yes mail_nfs_storage: yes lock_method: dotlock maildir_very_dirty_syncs: yes mail_executable(default): /usr/local/libexec/dovecot/imap mail_executable(imap): /usr/local/libexec/dovecot/imap mail_executable(pop3): /usr/local/libexec/dovecot/pop3 mail_executable(managesieve): /usr/local/libexec/dovecot/managesieve mail_plugins(default): quota imap_quota mail_plugins(imap): quota imap_quota mail_plugins(pop3): quota mail_plugins(managesieve): mail_plugin_dir(default): /usr/local/lib/dovecot/imap mail_plugin_dir(imap): /usr/local/lib/dovecot/imap mail_plugin_dir(pop3): /usr/local/lib/dovecot/pop3 mail_plugin_dir(managesieve): /usr/local/lib/dovecot/managesieve lda: postmaster_address: supportteam(a)domain.net hostname: inbox4.domain.net mail_plugins: quota sieve sendmail_path: /usr/sbin/sendmail auth default: mechanisms: plain login apop user: nobody username_translation: %@ passdb: driver: sql args: /usr/local/etc/postfix/dovecot.sql userdb: driver: sql args: /usr/local/etc/postfix/dovecot.sql socket: type: listen client: path: /var/spool/postfix/private/auth mode: 432 user: postfix group: vmail master: path: /var/run/dovecot/auth-master mode: 384 user: vmail group: vmail plugin: quota: dict:emailaccount::proxy::quotadict quota_warning95: storage=95%% /usr/local/bin/dovecot-quota-warning.sh 95 quota_warning90: storage=90%% /usr/local/bin/dovecot-quota-warning.sh 90 quota_warning80: storage=80%% /usr/local/bin/dovecot-quota-warning.sh 80 sieve: /home/vmail/%d/%n/sieve/%n(a)%d.sieve sieve_dir: /home/vmail/%d/%n/sieve/ dict: quotadict: mysql:/usr/local/etc/postfix/dovecot-dict-sql.conf Database schema: ============== # mysql -u root postfix mysql> describe quota2; +----------+--------------+------+-----+---------+-------+ | Field | Type | Null | Key | Default | Extra | +----------+--------------+------+-----+---------+-------+ | username | varchar(100) | NO | PRI | NULL | | | bytes | bigint(20) | NO | | 0 | | | messages | int(11) | NO | | 0 | | +----------+--------------+------+-----+---------+-------+ 3 rows in set (0.00 sec) mysql> select * from quota2 where username='darek(a)domain.com'; +------------------+----------+----------+ | username | bytes | messages | +------------------+----------+----------+ | darek(a)domain.com | 23552090 | 7 | +------------------+----------+----------+ -- Darek

2 1

Re: [Dovecot] dovecot.org broken
by Nick Edwards 26 Apr '11

26 Apr '11

Multiple mirrors (seems like you have plenty of offers) preferrably is multi geographical regions, using DNS round robin with TTL 0 on www and ftp , I wouldnt bother with the wiki mirroring though. However you could run 3600 seconds on it, should you need to bring it back elsewhere in a hurry. On Sun, Apr 24, 2011 at 1:19 AM, Timo Sirainen <tss(a)iki.fi> wrote: > On Thu, 2011-04-21 at 21:47 +0300, Timo Sirainen wrote: > > Serving it temporarily from a machine in my home. I'll move it to better > hosting in a few days. And I guess I should make it more fail safe some day > soon.. > > > > Lets see if mailman happens to work now. > > Thanks everyone for offering hosting. I've one easy solution worked out > already anyway, and looks like the old dovecot.org is also up nowadays, > but 30h downtime clearly isn't ideal.. > > I'm anyway going to figure out a more long term solution with some kind > of a quick failover in case something breaks. > > >

1 0

Re: [Dovecot] Having trouble getting Dovecot to read a ~/Maildir configuration
by Stan Hoeppner 26 Apr '11

26 Apr '11

Murray Collingwood put forth on 4/20/2011 8:29 PM: > Hi Stan > > I only have the one account on this server, everything else is relayed > elsewhere. If this is an SMTP relay server, I'm surprised you bothered to install an IMAP server at all. It would have been easier to simply alias postmaster@ to another account on another machine where you do store mailboxes. I.e. simply 'forward' all postmaster mail to you main account and use Sieve to sort all postmaster mail into a folder. This is exactly what I do. It's what a lot of people do, especially those handling many domains, and thus having lots of postmaster addresses. > A question about where the mail is actually supposed to be delivered to... > initially I configured Exim4 to delivery the email to ~/Maildir and I > noticed as you saw in the list directories like ~/Maildir/new and > ~/Maildir/cur, however once I configured Evolution to login to Dovecot I > noticed the directories ~/Maildir/INBOX/new and ~Maildir/INBOX/cur were > created. Should therefore Exim4 be configured to ~/Maildir/INBOX instead of > just ~/Maildir ? Configuration of maildir can be a little confusing the first time around. Given your situation/server, I'm really surprised you didn't use mbox instead. It fits this scenario much better than maildir. > Voila! I just tested this change with Exim4, restarted everything and > Evolution now shows me messages. The LAYOUT=fs was correct, and so it was > more a matter of getting Exim4 to deliver to ~/Maildir/INBOX .... a little > confusing but this was my first time with Exim4 (I've been a sendmail user > for a number of years). Setting up Dovecot LDA with EXIM: http://wiki1.dovecot.org/LDA/Exim You're probably using procmail or maildrop currently. I don't use either of these, so I'm unfamiliar with their setup WRT maildir. Should be pretty straightforward though. > RoundCube still isn't working but I'm not going to worry about that - > Evolution will be cool. Need more details to help with RC. As long as you can establish an IMAP connection to Dovecot, RC is pretty smart about figuring out where everything is even if you don't explicitly tell it. > Thanks for your help - simply confirming one setting helps. Heh, I didn't do much, but you're welcome. Are you planning on migrating all the mailboxes from the old server to this new one? -- Stan

2 2

[Dovecot] Having trouble getting Dovecot to read a ~/Maildir configuration
by Murray Collingwood 26 Apr '11

26 Apr '11

Hi folks Setting up a new server, hence a few software packages have been upgraded / changed. On my old server (only 2 years old) I was using Dovecot and RoundCube (web mail app) and had a good experience so was keen to use these again. The only major change is I have switched from sendmail to exim4 (which was installed by default on this Debian server). Exim4 appears to be doing the right thing, however read on and see if you can spot the error. I've tried two email clients, RoundCube (via apache) as a local connection and Evolution as a remote connection. Both appear to login to the Dovecot IMAP connection okay (log entries included further down), although they don't see any email. The INBOX is completely empty. Although when I check out /home/postmaster/Maildir/new it has many messages waiting to be read. It's like Exim4 is delivering the email into the ~/Maildir folder but Dovecot is not seeing it.... I've tried these three combinations in dovecot.conf but they give the same result: #mail_location = maildir:~/Maildir (ie this one I commented the line out to see if Dovecot would work it out automatically) mail_location = maildir:~/Maildir (I think this one should work) mail_location = maildir:~/Maildir:LAYOUT=fs (Now I'm just desperate and will try anything) The dovecot log gives no indication of any errors: This is the version I am running - it was the default version for Debian installed via apt-get: 2011-04-21 08:55:22 dovecot: Info: Dovecot v1.2.15 starting up (core dumps disabled) This connection is using Evolution email client on Linux: 2011-04-21 08:40:05 imap-login: Info: Login: user=<postmaster>, method=PLAIN, rip=122.148.149.28, lip=202.125.41.111 This connection is using roundcube via apache on the same server: 2011-04-21 08:40:41 imap-login: Info: Login: user=<postmaster>, method=PLAIN, rip=127.0.0.1, lip=127.0.0.1, secured 2011-04-21 08:40:41 IMAP(postmaster): Info: Disconnected: Logged out bytes=39/443 And finally a look at the ~/Maildir content for my "postmaster" user: root@ds5683:/etc/dovecot# ls -al /home/postmaster/Maildir total 148 drwx------ 6 postmaster postmaster 4096 Apr 21 08:55 . drwxr-xr-x 3 postmaster postmaster 4096 Apr 19 08:12 .. drwx------ 2 postmaster postmaster 12288 Apr 21 08:40 cur -rw------- 1 postmaster postmaster 89088 Apr 21 08:40 dovecot.index.cache -rw------- 1 postmaster postmaster 2376 Apr 21 08:40 dovecot.index.log -rw------- 1 postmaster postmaster 5208 Apr 21 08:40 dovecot-uidlist -rw------- 1 postmaster postmaster 8 Apr 21 08:55 dovecot-uidvalidity -rw------- 1 postmaster postmaster 0 Apr 21 08:34 dovecot-uidvalidity.4daf5f73 drwx------ 5 postmaster postmaster 4096 Apr 21 08:56 INBOX drwx------ 2 postmaster postmaster 12288 Apr 21 09:39 new drwx------ 2 postmaster postmaster 4096 Apr 21 09:39 tmp So, can somebody help me get Dovecot to recognise the messages in this mailbox please? You can suggest anything you like.... upgrades, conf changes, low level formating of HDD... at this stage I'm ready to try anything! Cheers Murray -- Murray Collingwood Focus Computing p +61 415 24 26 24 http://www.focus-computing.com.au

4 3

Re: [Dovecot] Using replaceable variables in sieve
by Stephan Bosch 26 Apr '11

26 Apr '11

On 4/24/2011 10:29 PM, Jerry wrote: > I am not even sure if this is possible. I cannot find an example of it > anywhere. > > I am in the process of setting up a "plus" addressing system. The > addresses would be addresses to accounts like > <sales+USERNAME(a)domain.com>. there are presently 50 such names in sales. > > This is the one line entry I presently have in the sieve script: > > if envelope :detail "To" "joe" {fileinto "joe"; stop;} > > Now, what I would like to do is find a way to do this: > > if envelope :detail "To" "joe" {fileinto :detail; stop} > > That does not work though. I really do not want to list every available > user individually since it will eventually become a nightmare to > maintain. Is there any way in a sieve script to assign the value of > ":detail" to another variable and use that variable in the "fileinto" > portion of the script? I would also need to maintain the same case > folding so as not to create multiple folders with the same name; ie, > Joe, joe, jOe The variables extension is what you need. Here's an example: require ["variables", "envelope", "fileinto", "subaddress"]; if envelope :is :user "to" "sales" { if envelope :matches :detail "to" "*" { /* Save name in ${name} in all lowercase except for the first letter. * Joe, joe, jOe thus all become 'Joe'. */ set :lower :upperfirst "name" "${1}"; } if string :is "${name}" "" { /* Default case if no detail is specified */ fileinto "sales"; } else { /* For sales+joe@ this will become users/Joe */ fileinto "users/${name}"; } } Regards, Stephan.

2 1

[Dovecot] Problem in Mail receiving
by Anshul Chauhan 25 Apr '11

25 Apr '11

i"m using dovecot-1.0.7-7.el5 on CentOS 5.5, i'm getting freqent problem of recieving multiple copies of mails received from outside my domain. this problem comes with some users and not with all the users, maillog shows the same mail downloaded again Please help Warm Regards, Anshul Chauhan "Never expect things to happen struggle & make them happen Never expect yourself to be given a good value Create a value for your own.."

3 2

[Dovecot] Seperator
by Carsten Laun-De Lellis 25 Apr '11

25 Apr '11

Hi all I hope to get some help on the separator. I am sure that I hava a wrong understanding what the separator is. I thaught the separator is the delimiter within the imap folder structure. For example: Imap folder structure: folder Flights, subfolder Lufthansa If the delimiter is . the ls a command should result: .Flights .Flights.Lufthansa If delimiter is / Flights Flights/Lufthansa I tried several delimiters but only the . Works. My dovecot.conf file: mail_location = maildir:/vmail/%d/%n namespace { type = private separator = / location = maildir:/vmail/%d/%n inbox = yes subscriptions = yes } I would appreciate any help Mit freundlichem Gruß Carsten Laun-De Lellis Dipl.-Ing. Elektrotechnik Certified Information Systems Auditor (CISA) Hauptstrasse 13 D-67705 Trippstadt Phone: +49 (6306) 992140 Mobile: +49 (151) 27530865 email: <mailto:carsten.laun-delellis@delellis.net> carsten.laun-delellis(a)delellis.net

3 2

[Dovecot] Thunderbird does not notice new mails arrival in imap folders
by Frank Bonnet 24 Apr '11

24 Apr '11

Hello Since I've installed Dovecot 2 I've observed that TB does not notice new mails arrival in IMAP folders. When I click on a folder new mails count is updated, with dovecot 1 it was automatic. I wonder if it is due to the new TB version (lastest stable) or Dovecot 2 (2.0.11). I use MBOX format. See below the doveconf -n trace Thanks for any idea/info > # 2.0.11: /usr/local/etc/dovecot/dovecot.conf > # OS: FreeBSD 8.2-RELEASE amd64 > auth_worker_max_count = 100 > debug_log_path = /var/log/dovecot/debug.log > default_client_limit = 6144 > default_process_limit = 1024 > disable_plaintext_auth = no > info_log_path = /var/log/dovecot/info.log > log_path = /var/log/dovecot/dovecot.log > mail_location = mbox:%h/:INDEX=/var/cache/dovecot/index/%u:INBOX=/var/mail/%u > managesieve_notify_capability = mailto > managesieve_sieve_capability = fileinto reject envelope encoded-character vacati on subaddress comparator-i;ascii-numeric relational regex imap4flags copy includ e variables body enotify environment mailbox date > mbox_write_locks = fcntl > passdb { > driver = passwd > } > plugin/sieve = ~/.dovecot.sieve > plugin/sieve_dir = ~/sieve > postmaster_address = postmaster(a)esiee.fr > protocols = imap pop3 sieve sieve > sendmail_path = /usr/local/sbin/sendmail > service auth { > client_limit = 7169 > } > service imap-login { > inet_listener imap { > port = 143 > } > inet_listener imaps { > port = 993 > ssl = yes > } > process_min_avail = 10 > service_count = 1 > vsz_limit = 1 G > } > service imap { > process_limit = 2048 > vsz_limit = 1 G > } > service managesieve-login { > inet_listener sieve { > port = 4190 > } > inet_listener sieve_deprecated { > port = 2000 > } > } > service pop3-login { > inet_listener pop3 { > port = 110 > } > inet_listener pop3s { > port = 995 > ssl = yes > } > } > ssl_ca = /etc/ssl/COMODO/ca.pem > ssl_cert = </etc/ssl/COMODO/cert.pem > ssl_key = </etc/ssl/COMODO/mail.key > userdb { > driver = passwd > } > verbose_proctitle = yes > protocol lda { > info_log_path = /var/log/dovecot/dovecot-lda.log > log_path = /var/log/dovecot/dovecot-lda-errors.log > mail_plugins = " sieve" > } > protocol imap { > imap_client_workarounds = tb-extra-mailbox-sep > } > protocol sieve { > managesieve_implementation_string = Dovecot Pigeonhole > }

3 3

[Dovecot] sieve & plus addressing
by Jerry 22 Apr '11

22 Apr '11

Assume and e-mail address of: me+dovecot(a)domain.com I have a sieve script that sorts mail into the appropriate folders using "+" addressing. I want to extend it to also work with mailing list like this one. A post from the dovecot forum arrives with a Delivered-To: me+dovecot(a)domain.com when I receive it. The "To" is to dovecot. I cannot figure out a way to get sieve to filter on the "Delivered-To" portion rather than the "To" portion using plus addressing. There are several other names; i.e, john, joe, bill, nancy, etcetera that would have the plus suffix of (in this scenario anyway) dovecot. Filtering on each individual address would be a real PIA. I believe it is not supported though. EXAMPLE: This works fine when filtering on the "To" attribute: Assuming email address: me+dovecot(a)domain.com ## Plus Addressing if envelope :detail "To" "dovecot" {fileinto "Dovecot"; stop;} Unfortunately, I cannot substitute the "Delivered-To" attribute in place of the "To" one. I know and currently do sort based on the "List-ID" attribute; however, I have other reasons for wanting to sort only on the delivery address. Is there anyway to actually incorporate the plus addressing feature with the delivery address? -- Jerry ✌ Dovecot.user(a)seibercom.net Disclaimer: off-list followups get on-list replies or get ignored. Please do not ignore the Reply-To header. __________________________________________________________________

3 3

[Dovecot] dovecot.org broken
by Timo Sirainen 21 Apr '11

21 Apr '11

Serving it temporarily from a machine in my home. I'll move it to better hosting in a few days. And I guess I should make it more fail safe some day soon.. Lets see if mailman happens to work now.

3 2

[Dovecot] the right way to delete mailbox/user home
by Davide Vaghetti 21 Apr '11

21 Apr '11

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Dear list, we are using dovecot with mdbox to provide mail services for a community of 1000 academic users. We have quite a big turnover of guest users, so we often have to deprovision the allocated resources, that is the mailboxes. Given that the users are virtual, and that the mdbox directory is located in the home directory of each virtual user (static userdb), is it ok to simply delete (rm -rf) the home directory to get rid of the mailbox? Could the delete, without say a dovecot reload, be harmful for dovecot processes and the like? thanks davide - -- Dott. Davide Vaghetti Centro Servizi Informatici Facolta' di Ingegneria Universita' di Pisa PGP: http://keys.keysigning.org:11371/pks/lookup?op=get&search=0x7A1B3BA18C4E0A4D -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.10 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/ iEYEARECAAYFAk2tq/cACgkQehs7oYxOCk1ECgCg6Q5Pj+0k9GVYlS1ggmDLkwAr srkAoKMixJmyB7E+Ki6T9/8IzwYRC55z =/ZoN -----END PGP SIGNATURE-----

2 2

[Dovecot] Running mailfront under dovecot2.x service supervision
by Uffe Jakobsen 21 Apr '11

21 Apr '11

Hello, Hello, I'm trying to run mailfront SMTP (http://untroubled.org/mailfront/) under Dovecot 2.x process/service supervision My intention was to utilize the fact that dovecot2.x seems to have some kind of generic process/service supervision as well as builtin ssl support. But I cannot get the most simple generic service setup (without ssl) to work. Currently running dovecot 2.0.11 on FreeBSD 8.1 service smtp-auth { executable = /usr/local/bin/smtpfront-qmail inet_listener smtp-auth { port = 587 ssl = no } } I have added the above to dovecot.conf Once I start dovecot everything seems fine - no errors in the log But at the first attempt to telnet to localhost port 587 - I instantly get the indication of never ending forks in the dovecot log (see below) - neither do I get the SMTP prompt that I expected in my telnet session - it just hangs. Apr 19 10:05:34 smtp-auth: Error: mailfront[43539]: bytes in: 0 bytes out: 29 Apr 19 10:05:34 smtp-auth: Error: mailfront[43541]: bytes in: 0 bytes out: 29 Apr 19 10:05:34 smtp-auth: Error: mailfront[43543]: bytes in: 0 bytes out: 29 Apr 19 10:05:34 smtp-auth: Error: mailfront[43545]: bytes in: 0 bytes out: 29 Question is if I've misconfigured something or if it is impossible to utilize dovecot2.x this way ? PS: Now I know that I could use daemontools or such for this task - but I like the dovecot ssl handling and would like to end up by wrapping this smtp service inside same dovecot ssl that I use for IMAPS. Any feedback is more than welcome - I'm stuck Thanks in advance Uffe -- View this message in context: http://old.nabble.com/Running-mailfront-under-dovecot2.x-service-supervisio… Sent from the Dovecot mailing list archive at Nabble.com.

3 6

Re: [Dovecot] LDA null logging patch
by Joseph Tam 21 Apr '11

21 Apr '11

> > Timo, would you consider inclusion of this patch which will skip > > logging deliveries if deliver_log_format is empty: > > Committed, slightly modified: > http://hg.dovecot.org/dovecot-2.0/rev/0e406e7cb609 Thanks. I tried to contribute by updating the wiki docs, but it belched when I saved the update: TextCha: Wrong answer! Go back and try again... Here's what I tried to add at the bottom (in text mode) The {{{deliver_log_format}}} specifies logging details for a successful delivery. (versions>2.0.13: leaving it empty will disable this logging). See example configuration files for a full list of variable expansion: {{{ delivery_log_format = msgid=%m: %$ }}} Joseph Tam <jtam.home(a)gmail.com>

1 0

[Dovecot] Umask of Homedir
by Francisco Wagner C. Freire 20 Apr '11

20 Apr '11

Hello, I following the instrucions of: http://wiki2.dovecot.org/SharedMailboxes/Permissions When the user receive the first mail, dovecot create the directory structure always using mode 0700, if i change the permission of the user maildir all new mails arrived get the correct umask: dovecot: lmtp(24960, *): Debug: Namespace INBOX.: Using permissions from .../maildir: mode=0770 The problem is: I need to all accounts have the permission 0770. Tried to use the option: mail_access_groups but doesn't work at all when the first creation of the user path. "For example a simple way to set up shared mailbox access for all system users is to make all mail dirs/files 0770/0660 mode and owned by group "sharedmail" and then set mail_access_groups=sharedmail. Using more fine grained groups of course leaks less mail data in case there's a security hole in Dovecot" Is a bug? My dovecot version: doveconf -n # 2.0.12 (811a6d173bb2): /etc/dovecot/dovecot.conf # OS: Linux 2.6.32-5-amd64 x86_64 Debian 6.0.1 Access groups: mail_access_groups = _sysadms Thanks and sorry for bad english.

2 7

[Dovecot] SSL Warning Message
by Kilburn Abrahams 20 Apr '11

20 Apr '11

Hi Upgraded to 2.0.12 and when I restart I get this 'doveconf: Warning: SSL is disabled because global ssl=no, ignoring ssl=yes for subsection.' even though there is no subsection with ssl=yes. Regards Kilburn

3 3

[Dovecot] Logging commands
by Luciano Mannucci 20 Apr '11

20 Apr '11

Hello all, is there a way to make dovecot log the commands it gets from its clients both in imap and pop3? I need to log when messages are deleted so I can tell to the customer when and from which IP address his/her mailbox was emptied. I'm trying to track down problems with M$ Windows Live Mail clients that seem to loose messages now and then. Luciano. -- /"\ /Via A. Salaino, 7 - 20144 Milano (Italy) \ / ASCII RIBBON CAMPAIGN / PHONE : +39 2 485781 FAX: +39 2 48578250 X AGAINST HTML MAIL / E-MAIL: posthamster(a)sublink.sublink.ORG / \ AND POSTINGS / WWW: http://www.lesassaie.IT/

3 3

[Dovecot] help with MYSQL and dovecot
by Littlefield, Tyler 20 Apr '11

20 Apr '11

Hello all: I understand I can't provide to much information; at the moment, I do not have dovecot installed. Here is the problem. I started out running saslauthd, but there appears to be a problem where memory isn't freed after someone fails to authenticate, which leads to a huge dos attack. I hit this problem a couple of times, and it looks like some poor lonely soul (or bot, as it may be) with no life decided to go after my server again today. I had previously tried to configure dovecot, but I have an odd mysql setup, so it was particularly dificult. I am leaving out of town tomorrow afternoon and will not have internet, so I want to make sure this is going to be running as it should be. Here is the info from the dovecot configuration file for mysql. It was giving an error about "username" when I tried to run this. If someone can't spot the problem from this, I will disable courier and reinstall dovecot tonight so I can get the exact error. userdb static { args = uid=vmail gid=vmail home=/home/vmail/%d/%n password_query = select email as user, password,\ home AS userdb_home, uid AS userdb_uid, gid AS userdb_gid \ from users where email = '%u' user_query = \ SELECT home AS userdb_home, uid AS userdb_uid, gid AS userdb_gid \ FROM users WHERE email = '%n'; } And here is the describe for both tables: mysql> describe users; +----------+-------------+------+-----+---------+-------+ | Field | Type | Null | Key | Default | Extra | +----------+-------------+------+-----+---------+-------+ | email | varchar(80) | NO | PRI | NULL | | | password | varchar(20) | NO | | NULL | | +----------+-------------+------+-----+---------+-------+ 2 rows in set (0.00 sec) -- mysql> describe domains; +--------+-------------+------+-----+---------+-------+ | Field | Type | Null | Key | Default | Extra | +--------+-------------+------+-----+---------+-------+ | domain | varchar(50) | NO | PRI | NULL | | +--------+-------------+------+-----+---------+-------+ 1 row in set (0.01 sec) Thanks, Ty

1 0

[Dovecot] LDAP Authentication with multiple independent domains
by Alex Cherniak 20 Apr '11

20 Apr '11

Is it possible to authenticate users against multiple independent AD domains? In my dovecot-ldap.conf I entered two hosts: hosts = host1 host 2 auth_bind_userdn = %d\%n ldap_version = 3 base = cn=users,dc=%d,dc=net auth_bind = yes but OpenLDAP seems to stop authentication as soon as the first host succeeds or fails. I also tried to configure trust between the two, but it didn't work either. Please help...

2 1

[Dovecot] LDA null logging patch
by Joseph Tam 20 Apr '11

20 Apr '11

I don't really need logging of successful local deliveries since the MTA provides enough data. I can't get rid of LDA delivery logs by setting deliver_log_format = All this does is produce an empty log message e.g. Apr 16 01:22:05 dserver dovecot: lda(user): Timo, would you consider inclusion of this patch which will skip logging deliveries if deliver_log_format is empty: --- src/lib-lda/mail-deliver.c~ Sat Apr 16 01:27:23 2011 +++ src/lib-lda/mail-deliver.c Sat Apr 16 01:29:05 2011 @@ -100,2 +100,5 @@ + if (!(ctx->set->deliver_log_format) || !(*ctx->set->deliver_log_format)) + return; + va_start(args, fmt); Joseph Tam <jtam.home(a)gmail.com>

2 1

[Dovecot] Debug new emails?
by Beto Moreno 20 Apr '11

20 Apr '11

Hi guys. I would like to debug all the new emails arrive to the users mailbox, I have some issue with 1 users that claim that is losing some important emails. The issue that I are not logging to much info in dovecot, I had read the mail_log plugin wiki is not difficult to setup. I want to see went the users receive the new emails, because postfix have the log that say" "sent" from the envelop to the issue user, but I the user say that he didn't receive the email, check his emails and is true I didn't see those 2 emails that postfix send to the user mailbox. I check my spam server and is not blocking that envelop, the spam is not causing this. I'm using Centos 5.4 Postfix 2.3.x Dovecot 1.0.x,but reading mail_log plugin say that we need 1.2.x, can I still use this plugin or I have other options? Thanks!!!

3 3

[Dovecot] expire-tool skipping mailbox
by Alex Reinhart 20 Apr '11

20 Apr '11

Hello, I have dovecot set up with expire-tool to nuke Junk messages greater than 30 days old. On a server with many user accounts, it seems to work on most of them. However, on my user account, expire-tool skips my Junk folder entirely, despite it containing messages from January of this year. Here is the expire-tool --test output: Info: alex(a)scienceforums.net/Junk: timestamp 1284027481 (Thu Sep 9 05:18:01 2010) -> 1304023056 (Thu Apr 28 15:37:36 2011) Then it skips to the next mailbox. (Note that I intentionally set the timestamp back to force it to consider my mailbox.) I don't understand why it doesn't want to expunge my 2700 junk messages when it will expunge several thousand in other accounts happily. The expire plugin has been enabled for probably over a year, so all of the messages should be tracked. My only hypothesis is that it has something to do with variables in the mail_location; however, mail_location should be overridden by a user_query, though that contains variables too. Would this account for the issue? It seems unlikely, since other users on the server work just fine. dovecot -n output for the interested: # 1.2.9: /etc/dovecot/dovecot.conf # OS: Linux 2.6.32-24-server x86_64 Ubuntu 10.04.2 LTS ext3 base_dir: /var/run/dovecot/ log_timestamp: %Y-%m-%d %H:%M:%S protocols: managesieve imaps pop3s listen(default): *:143 listen(imap): *:143 listen(pop3): *:110 listen(managesieve): * ssl_listen(default): *:993 ssl_listen(imap): *:993 ssl_listen(pop3): *:995 ssl_listen(managesieve): login_dir: /var/run/dovecot//login login_executable(default): /usr/lib/dovecot/imap-login login_executable(imap): /usr/lib/dovecot/imap-login login_executable(pop3): /usr/lib/dovecot/pop3-login login_executable(managesieve): /usr/lib/dovecot/managesieve-login first_valid_uid: 150 last_valid_uid: 150 mail_privileged_group: mail mail_location: maildir:/var/vmail/%d/%u mbox_write_locks: fcntl dotlock mail_executable(default): /usr/lib/dovecot/imap mail_executable(imap): /usr/lib/dovecot/imap mail_executable(pop3): /usr/lib/dovecot/pop3 mail_executable(managesieve): /usr/lib/dovecot/managesieve mail_plugins(default): quota imap_quota expire mail_plugins(imap): quota imap_quota expire mail_plugins(pop3): quota expire mail_plugins(managesieve): mail_plugin_dir(default): /usr/lib/dovecot/modules/imap mail_plugin_dir(imap): /usr/lib/dovecot/modules/imap mail_plugin_dir(pop3): /usr/lib/dovecot/modules/pop3 mail_plugin_dir(managesieve): /usr/lib/dovecot/modules/managesieve lda: mail_plugins: quota sieve expire postmaster_address: postmaster(a)xyloid.org sendmail_path: /usr/lib/sendmail auth_socket_path: /var/run/dovecot/auth-master sieve_global_path: /etc/dovecot/sieve.global auth default: user: nobody passdb: driver: sql args: /etc/dovecot/dovecot-sql.conf userdb: driver: sql args: /etc/dovecot/dovecot-sql.conf socket: type: listen client: path: /var/spool/postfix/private/auth mode: 432 user: postfix group: postfix master: path: /var/run/dovecot/auth-master mode: 432 user: vmail group: mail plugin: quota: dict:user::proxy::quotadict quota_rule: *:storage=1G quota_rule2: Trash:storage=10%% quota_rule3: Junk:ignore sieve: /var/vmail/%d/%n/dovecot.sieve expire: Trash 7 Trash/* 7 Junk 30 expire_dict: proxy::expire dict: quotadict: mysql:/etc/dovecot/dovecot-dict-quota.conf expire: mysql:/etc/dovecot/dovecot-dict-expire.conf And dovecot-dict-expire.conf: connect = host=localhost dbname=mail user=mail password=[password] map { pattern = shared/expire/$user/$mailbox table = expires value_field = expire_stamp fields { username = $user mailbox = $mailbox } } Thanks. - Alex Reinhart

2 2

[Dovecot] sieve-test ignores precedence and other for vacation
by Burckhard Schmidt 20 Apr '11

20 Apr '11

Hello, I'm using pigeonhole-0.2.3, it works fine. I tried to verify some build in checks of vacation concerning precedence or auto-submitted header lines. It looks like sieve-test ignores header lines like Auto-Submitted: auto-submitted Precedence: bulk Return-Path: MAILER-DAEMON@... if I have a vacation script like require ["vacation", "regex", "fileinto", "variables", "envelope"]; if allof (header :regex ["to"] ["address1", "address2"], header :matches "to" "*") { vacation :days 7 : ... "text"; } The email to test contains a line like Precedence: bulk or Return-Path: <MAILER-DAEMON@...> or Auto-Submitted: yes sieve-test -D -C script.sieve mail I get Performed actions: * send vacation message: => seconds : 604800 ... text of vacation message END MESSAGE Implicit keep: * store message in folder: INBOX sieve-test(root): Info: final result: success -- Regards --- Burckhard Schmidt

2 1

[Dovecot] sieve logging
by Carsten Laun-De Lellis 20 Apr '11

20 Apr '11

Hi all I have installed dovecot 2.0.8 and sieve. Everything works fine, but I wonder how can I log sieve actions? Any help? Mit freundlichem Gruß Carsten Laun-De Lellis Dipl.-Ing. Elektrotechnik Certified Information Systems Auditor (CISA) Hauptstrasse 13 D-67705 Trippstadt Phone: +49 (6306) 992140 Mobile: +49 (151) 27530865 email: <mailto:carsten.delellis@delellis.net> carsten.delellis(a)delellis.net

2 1

[Dovecot] Question about Outlook workarounds
by Michael Durket 19 Apr '11

19 Apr '11

Do the Outlook workarounds in Dovecot 1.x still apply to current versions of Outlook? Or has Microsoft fixed Outlook such that workarounds are no longer needed in Dovecot (and if so, after what version of Outlook can I remove the workaround settings in my dovecot.conf file)?

6 5

[Dovecot] Outlook double attachments
by Ladislav Pašek 19 Apr '11

19 Apr '11

Hello, does anybody have experience with delivery of double attachments into Outlook? I suppose that this would be a problem of Outlook 2010 but to be sure I'd like to ask here as we are using Dovecot 2.0.11 Best Regards Ladislav

2 1

Re: [Dovecot] Solaris hardware crypto engines
by Chris Hoogendyk 19 Apr '11

19 Apr '11

The attachment made the message too long for the forum. So I canceled the original. If you want the Sun article, you can google 05071387.pdf. The original went through to Martin. On 4/18/11 5:02 PM, Chris Hoogendyk wrote: > On 4/18/11 6:30 AM, Martin Preen wrote: >> Hello, >> I tried to find out how about to use the hardware crypto engines under >> Solaris (Sun Fire T2000). It seems, that its not just a compilation issue: >> >>> For operations that are to be offloaded, it is necessary to restrict use to subset >> > of OpenSSL functions (the EVP_ functions) and explicitly indicate the use of the PKCS11 >> > engine; something like the following works for bulk ciphers (the process for RSA is similar): >>> >>> ENGINE *e; >>> ENGINE_load_builtin_engines(); >>> e = ENGINE_by_id("pkcs11"); >>> ENGINE_set_default_ciphers(e); >>> EVP_CIPHER_CTX_init (&ctx); >>> EVP_EncryptInit (&ctx, EVP_des_cbc (), key, iv); >>> EVP_EncryptUpdate (.....); >> >> Since I'm not familiar with SSL programming, I wonder if it's possible to >> modify the dovecot 1.2.x source code. Maybe someone has already tried this >> or can give me hint. > > You don't want to do that. > > The objective is for the ssl engine to be low level and basically invisible to layers of > application above that use it. So, build openssl properly and it just works for everything else. > > I'm not at work today, so I don't have reference to my notes. Ah, just found an email I sent to my > colleagues -- copied it below. -- --------------- Chris Hoogendyk - O__ ---- Systems Administrator c/ /'_ --- Biology& Geology Departments (*) \(*) -- 140 Morrill Science Center ~~~~~~~~~~ - University of Massachusetts, Amherst <hoogendyk(a)bio.umass.edu> --------------- Erdös 4 -------- Original Message -------- Subject: building apps with ssl Date: Thu, 18 Mar 2010 11:30:42 -0400 From: Chris Hoogendyk<hoogendyk(a)bio.umass.edu> cool. I've got things working now so that I can build applications with the openssl built by Sun to tap into the cryptographic accelerators on the T2. It turns out that the /opt/coolstack stuff related to openssl is actually symlinks to /usr/sfw. So, in the Makefile, if I set the openssl directory to /usr/sfw, rather than the default /usr/local/openssl, it finds the includes, the libraries, and the binaries that are needed. Then I specifically point the certs directory (in the Makefile) to /usr/local/openssl/certs for local control. Then, for the example of uw-imap, everything builds just fine. This should simply apply to anything we need to build with openssl on any of the T5220s. One side note is that this was a custom Makefile. Applications that use ./configure would presumably find the openssl through the paths provided in /usr/local/src/env. In the process of figuring that out, I also found that one of the most recent Solaris 10 kernel patches that we have on imladris specifically addresses awareness of the crypto accelerators and included patches to the openssl related items in /usr/sfw. So, I'm pretty confident that everything is alright. It's interesting too that in the paper presented at ACM by Sun last year they said that a couple of classes of attacks on crypto processes were negated by running it directly on the CPU. One of them had to do with timing. I should forward that paper to you as well. OK, just attached it. -- --------------- Chris Hoogendyk - O__ ---- Systems Administrator c/ /'_ --- Biology& Geology Departments (*) \(*) -- 140 Morrill Science Center ~~~~~~~~~~ - University of Massachusetts, Amherst <hoogendyk(a)bio.umass.edu> --------------- Erdös 4

1 0

[Dovecot] Solaris hardware crypto engines
by Martin Preen 18 Apr '11

18 Apr '11

Hello, I tried to find out how about to use the hardware crypto engines under Solaris (Sun Fire T2000). It seems, that its not just a compilation issue: > For operations that are to be offloaded, it is necessary to restrict use to subset > of OpenSSL functions (the EVP_ functions) and explicitly indicate the use of the PKCS11 > engine; something like the following works for bulk ciphers (the process for RSA is similar): > > ENGINE *e; > ENGINE_load_builtin_engines(); > e = ENGINE_by_id("pkcs11"); > ENGINE_set_default_ciphers(e); > EVP_CIPHER_CTX_init (&ctx); > EVP_EncryptInit (&ctx, EVP_des_cbc (), key, iv); > EVP_EncryptUpdate (.....); Since I'm not familiar with SSL programming, I wonder if it's possible to modify the dovecot 1.2.x source code. Maybe someone has already tried this or can give me hint. Regards. Martin

2 1

Re: [Dovecot] 2.0.12 ipwd.c does not compile under solaris
by Joseph Tam 18 Apr '11

18 Apr '11

> From: Roger Fujii <rmf(a)lookhere.com> > > the new src/lib/ipwd.c introduced in 2.0.12 no longer compiles on > solaris. Under solaris, > the *_r routines doesn't pass in result as the last parameter and return > errno - it just returns result. > obviously a job for configure..... This was solved several Emails back about forcing the use of POSIX threading models (a workaround path is provided): http://www.dovecot.org/list/dovecot/2011-April/058602.html Joseph Tam <jtam.home(a)gmail.com>

1 0

[Dovecot] Dovecot v2.0.12 OpenBSD - getpwuid() error
by LEVAI Daniel 17 Apr '11

17 Apr '11

Hi! I've upgraded from 2.0.11 to 2.0.12. I've experienced errors during delivery with dovecot-lda. The error log attached contains the errors. Since then I had to downgrade to 2.0.11, to make it work again. When starting 2.0.12, it couldn't chown() the files under /var/dovecot (eg.: dict) to the user specified in the configuration file. Configuration: # doveconf -n # 2.0.11: /etc/dovecot/dovecot.conf # OS: OpenBSD 4.8 i386 auth_master_user_separator = * auth_mechanisms = plain login digest-md5 ntlm auth_verbose = yes base_dir = /var/dovecot/ default_internal_user = _dovecot default_login_user = _dovenull dict/quota = pgsql:/etc/dovecot/dovecot_dict-sql.conf first_valid_gid = 8000 first_valid_uid = 8000 info_log_path = /var/log/mail/dovecot.info listen = ip 127.0.0.1 log_path = /var/log/mail/dovecot.log mail_location = maildir:~/Maildir/ mail_plugins = quota managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date passdb { args = /etc/dovecot/dovecot-sql.conf driver = sql } passdb { args = /etc/dovecot/master_passdb-sql.conf driver = sql master = yes pass = yes } plugin/quota = dict:User quota::proxy::quota plugin/quota_rule = *:storage=100M plugin/quota_rule2 = Trash:storage=+50M plugin/sieve = ~/dovecot.sieve plugin/sieve_dir = ~/sieve plugin/sieve_global_dir = /var/mail_virtual/sieve/ plugin/sieve_max_script_size = 1M plugin/sieve_quota_max_scripts = 5 plugin/sieve_quota_max_storage = 5M protocols = pop3 imap sieve service auth { unix_listener /var/spool/postfix/private/auth { group = _postfix mode = 0660 } unix_listener /var/www/priv/dovecot-auth { group = www mode = 0660 } unix_listener auth-master { group = vmail mode = 0660 } } service dict { unix_listener dict { group = vmail mode = 0660 } } service imap-postlogin { executable = script-login /etc/dovecot/postlogin.sh user = root } service imap { executable = imap imap-postlogin } service managesieve-login { vsz_limit = 64 M } service pop3-postlogin { executable = script-login /etc/dovecot/postlogin.sh user = root } service pop3 { executable = pop3 pop3-postlogin } ssl = required ssl_cert = </etc/ssl/dovecot_cert.pem ssl_key = </etc/ssl/private/dovecot_key.pem userdb { driver = prefetch } userdb { args = /etc/dovecot/dovecot-sql.conf driver = sql } protocol imap { mail_plugins = quota imap_quota } protocol pop3 { mail_plugins = quota pop3_client_workarounds = outlook-no-nuls oe-ns-eoh pop3_uidl_format = %08Xu%08Xv } protocol lda { deliver_log_format = msgid=%m, from=%f, subject=%s: %$ mail_plugins = quota sieve postmaster_address = postmaster@domain sendmail_path = /usr/local/sbin/sendmail } Daniel -- LÉVAI Dániel PGP key ID = 0x83B63A8F Key fingerprint = DBEC C66B A47A DFA2 792D 650C C69B BE4C 83B6 3A8F

1 1

[Dovecot] pop3-login segfaults (new backtrace)
by interfaSys sàrl 17 Apr '11

17 Apr '11

Hello, A while back I reported that pop3-login was segfaulting, but my traces were not very helpful. Here is a new one. Let me know if it helps. #0 0x000000080090cf91 in _pthread_mutex_init_calloc_cb () from /lib/libc.so.7 No symbol table info available. #1 0x000000080090dc9d in _pthread_mutex_init_calloc_cb () from /lib/libc.so.7 No symbol table info available. #2 0x000000080090e9c5 in _pthread_mutex_init_calloc_cb () from /lib/libc.so.7 No symbol table info available. #3 0x00000008009116ec in _malloc_prefork () from /lib/libc.so.7 No symbol table info available. #4 0x00000008009143c4 in malloc () from /lib/libc.so.7 No symbol table info available. #5 0x000000080047774c in data_stack_init () from /dovecot-2.0-hg/src/lib-dovecot/.libs/libdovecot.so.0 No symbol table info available. #6 0x00007fffffffe260 in ?? () No symbol table info available. #7 0x000000004da57f53 in ?? () No symbol table info available. #8 0x0000000000000048 in ?? () No symbol table info available. #9 0x000000080049d5ae in lib_init () from /dovecot-2.0-hg/src/lib-dovecot/.libs/libdovecot.so.0 No symbol table info available. #10 0x000000004da031c7 in ?? () No symbol table info available. #11 0x0000000000054e94 in ?? () No symbol table info available. #12 0x0000000000403392 in ?? () No symbol table info available. #13 0x000000080049d609 in master_service_init () from /dovecot-2.0-hg/src/lib-dovecot/.libs/libdovecot.so.0 No symbol table info available. #14 0x0000000000403392 in ?? () No symbol table info available. #15 0x0000000000000048 in ?? () No symbol table info available. #16 0x00007fffffffe260 in ?? () No symbol table info available. #17 0x0000000000000001 in ?? () No symbol table info available. #18 0x0000000000403650 in pop3_login_setting_parser_info () No symbol table info available. #19 0x0000000000403392 in ?? () No symbol table info available. #20 0x00007fffffffe308 in ?? () No symbol table info available. #21 0x0000000000000000 in ?? () No symbol table info available. #22 0x0000000000000000 in ?? () No symbol table info available. #23 0x000000080044bf41 in main () from /dovecot-2.0-hg/src/login-common/.libs/libdovecot-login.so.0 No symbol table info available. #24 0x00007fffffffe308 in ?? () No symbol table info available. #25 0x00000001005333d0 in ?? () No symbol table info available. #26 0x0000000000000001 in ?? () No symbol table info available. #27 0x00007fffffffe308 in ?? () No symbol table info available. #28 0x0000000800ace8b0 in __stack_chk_guard () from /lib/libc.so.7 No symbol table info available. #29 0x0000000000000001 in ?? () No symbol table info available. #30 0x00007fffffffe2e0 in ?? () No symbol table info available. #31 0x00007fffffffe318 in ?? () No symbol table info available. #32 0x00007fffffffe308 in ?? () No symbol table info available. #33 0x0000000000000000 in ?? () No symbol table info available. #34 0x0000000000000000 in ?? () No symbol table info available. #35 0x0000000000401dae in _start () No symbol table info available. I'm using GCC 4.5 with gold. Using the standard linker creates a binary that doesn't crash. It's the only part of dovecot that has a problem. imap-login works fine. Cheers, Olivier

3 5

[Dovecot] 2.0.12 ipwd.c does not compile under solaris
by Roger Fujii 17 Apr '11

17 Apr '11

the new src/lib/ipwd.c introduced in 2.0.12 no longer compiles on solaris. Under solaris, the *_r routines doesn't pass in result as the last parameter and return errno - it just returns result. obviously a job for configure..... -- Roger Fujii<rmf(a)lookhere.com>

2 1

[Dovecot] Post-login script with LDAP virtual users
by Hideo GOTO 16 Apr '11

16 Apr '11

Dear sirs, I'm working on Post-login script for migrating 40K Courier-imap users to Dovecot. After reading related topics about post-login script in your documentation, mailing list, I cannot remove the problem described here-below. Is there any special config to add when users are virtual (authentication and user info is fed by LDAP server). I would be grad if anyone could give me advise. Phenomena: ========== Although the authentication and script execution is successfully done, Pop3 session is aborted just after that, leaving the following error message to syslog: /var/log/maillog: Feb 7 17:45:58 pop3migr dovecot: pop3(vuser1): Post-login script denied access to user vuser1 cf. "vuser1" is UID of a virtual account on the LDAP tree. Maildir is located at /var/spool/postfixdata/%u/Maildir, and is owned by linux local user "mailuser". Dovecot works perfect ,if post-login script configuration is commented out. Environment: Dovecot: dovecot-2.0.9 (built from source tar ball) OS: Linux / 2.6.30.10-105.2.23.fc11.x86_64 (Virtual machine on a xen server) Maidir: tested both with local file system and NFS (ext3, xfs) client: Using telnet on pop3 TCP port. All the pop3 users are virtual and does not have local login account ('authentication and user information is given by LDAP server). SMTP service is managed by Postfix: ( A single local login account is writing all mails to Maildir for all the virtual users. ) Thanks in advance.

4 5

Re: [Dovecot] coredump in dovecot 2.0.11
by k b 16 Apr '11

16 Apr '11

This is it: -------- [root@server00 spool]# service dovecot start Starting Dovecot Imap: [ OK ] [root@isteren spool]# gdb /usr/libexec/dovecot/imap core GNU gdb (GDB) Fedora (7.2-46.fc14) Copyright (C) 2010 Free Software Foundation, Inc. License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html> This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law. Type "show copying" and "show warranty" for details. This GDB was configured as "i686-redhat-linux-gnu". For bug reporting instructions, please see: <http://www.gnu.org/software/gdb/bugs/>... Reading symbols from /usr/libexec/dovecot/imap...Reading symbols from /usr/lib/debug/usr/libexec/dovecot/imap.debug...done. done. /var/spool/core: No such file or directory. (gdb) bt full No stack. (gdb) q Should i create the /var/spool/core (file or directory) first? --- On Sat, 4/9/11, Timo Sirainen <> wrote: > Subject: Re: [Dovecot] coredump in dovecot 2.0.11 > Date: Saturday, April 9, 2011, 12:29 PM > I'm guessing it either couldn't open > the binary file or the core file.. Even without debug > symbols it should print something. What's the full gdb > command you're giving and its output? > > On 9.4.2011, at 13.26, k b wrote: > > > apparently i cannot get it right, > > (gdb) bt full says: > > No stack. > > > > > > i did install the debuginfo files > > debuginfo-install dovecot-2.0.11-1.fc14.i686 > > > > but gdb still says No stack. > > > > > > > > > > > > > > --- On Sat, 4/9/11, Timo Sirainen <tss(a)iki.fi> wrote: > > > >> Subject: Re: [Dovecot] coredump in dovecot 2.0.11 > >> Cc: dovecot(a)dovecot.org > >> Date: Saturday, April 9, 2011, 9:01 AM > >> On 9.4.2011, at 9.37, k b wrote: > >> > >>> I can post the coredump but i will have to > clean it > >> first as i can see it contains a few emails. > >>> would it help to post the coredump or shuould > i skip > >> that? > >> > >> The core file itself isn't useful, because it's > highly > >> system specific. Posting a gdb backtrace from it > would be > >> very useful though. So basically: > >> > >> gdb /usr/libexec/dovecot/imap core > >> bt full > >> > >> > > > >

3 7

[Dovecot] Compiling Error with Dovecot 1.0.7 and Sieve 1.0.4
by Jay Welch 15 Apr '11

15 Apr '11

Hi, I am having compiling issues with Sieve and I am not sure what the error is stating. [root@iosmail dovecot-sieve-1.0.4]# make make all-recursive make[1]: Entering directory `/home/jayw/Desktop/dovecot-sieve-1.0.4' Making all in src make[2]: Entering directory `/home/jayw/Desktop/dovecot-sieve-1.0.4/src' Making all in libsieve make[3]: Entering directory `/home/jayw/Desktop/dovecot-sieve-1.0.4/src/libsieve' /bin/sh ../../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I../.. -I/usr/src/dovecot/dovecot-1.0.7 -I/usr/src/dovecot/dovecot-1.0.7/src/lib -I../../src @CFLAGS@ -MT addr.lo -MD -MP -MF .deps/addr.Tpo -c -o addr.lo addr.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -I../.. -I/usr/src/dovecot/dovecot-1.0.7 -I/usr/src/dovecot/dovecot-1.0.7/src/lib -I../../src @CFLAGS@ -MT addr.lo -MD -MP -MF .deps/addr.Tpo -c addr.c -fPIC -DPIC -o .libs/addr.o gcc: @CFLAGS@: No such file or directory make[3]: *** [addr.lo] Error 1 make[3]: Leaving directory `/home/jayw/Desktop/dovecot-sieve-1.0.4/src/libsieve' make[2]: *** [all-recursive] Error 1 make[2]: Leaving directory `/home/jayw/Desktop/dovecot-sieve-1.0.4/src' make[1]: *** [all-recursive] Error 1 make[1]: Leaving directory `/home/jayw/Desktop/dovecot-sieve-1.0.4' make: *** [all] Error 2 Also, I did not originally have the source files and I had to download them for *dovecot-config*. Not sure if that makes a difference or not. Much Appreciated -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean.

2 3

[Dovecot] Problem login in managesieve with email address
by Juan C. Blanco 15 Apr '11

15 Apr '11

Hello all, I have a installation of dovecot 1.2.16, sieve-0.1.18, managesieve-0.11.12 in dovecot-ldap.conf auth_bind=yes user_attrs = irisMailbox=home,fiMailQuotaSize=quota_rule=*:storage user_filter = (|(uid=%u)(mail=%u)) pass_attrs = userPassword=password,irisMailbox=userdb_home,fiMailQuotaSize=userdb_quota_rule=*:storage pass_filter = (|(uid=%u)(mail=%u)) I'm doing some test to authenticate using the full email address for authentication and this works fine for IMAP and POP3 but dows not work with MANAGESIEVE I have a test machine with dovecot 2.0.12 and pigeonhole-0.2.3 and the results are the same. ¿Do you known if there is any reason for this differente behaviour? Activating debug in dovecot this are the difference between IMAP and MANAGESIEVE authenticacion Apr 15 17:43:15 auth: Debug: auth client connected (pid=13832) Apr 15 17:43:15 auth: Debug: client in: AUTH 1 PLAIN service=sieve secured lip=138.100.8.17 rip=138.100.8.42 lport=2000 rport=52828 resp=<hidden> Apr 15 17:43:15 auth: Debug: auth(d0122(a)alumnos.fi.upm.es,138.100.8.42,master): Master user lookup for login: d0122 Apr 15 17:43:15 auth: Debug: cache(d0122(a)alumnos.fi.upm.es,138.100.8.42,master): hit: Apr 15 17:43:15 auth: Info: cache(d0122(a)alumnos.fi.upm.es,138.100.8.42,master): User unknown Apr 15 17:43:17 auth: Debug: client out: FAIL 1 user=d0122(a)alumnos.fi.upm.es Apr 15 17:43:17 managesieve-login: Info: Disconnected (auth failed, 1 attempts): user=<d0122(a)alumnos.fi.upm.es>, method=PLAIN, rip=138.100.8.42, lip=138.100.8.17, TLS Apr 15 17:43:18 auth: Debug: auth client connected (pid=13833) Apr 15 17:43:18 auth: Debug: client in: AUTH 1 PLAIN service=imap secured lip=138.100.8.17 rip=138.100.8.42 lport=993 rport=34094 resp=<hidden> Apr 15 17:43:18 auth: Debug: cache(d0122(a)alumnos.fi.upm.es,138.100.8.42): hit: <hidden> userdb_home=/mail/alumnos/d0/d0122 userdb_quota_rule=*:storage=10240 Apr 15 17:43:18 auth: Debug: client out: OK 1 user=d0122(a)alumnos.fi.upm.es Apr 15 17:43:18 auth: Debug: master in: REQUEST 413401089 13833 1 42fd9bf31349809a03f19a6a3b9730cc Apr 15 17:43:18 auth: Debug: userdb-cache(d0122(a)alumnos.fi.upm.es,138.100.8.42): miss Apr 15 17:43:18 auth: Debug: passwd-file(d0122(a)alumnos.fi.upm.es,138.100.8.42): lookup: user=d0122(a)alumnos.fi.upm.es file=/nas/mail/etc/passwd.master Apr 15 17:43:18 auth: Info: passwd-file(d0122(a)alumnos.fi.upm.es,138.100.8.42): unknown user Apr 15 17:43:18 auth: Debug: prefetch(d0122(a)alumnos.fi.upm.es,138.100.8.42): success Apr 15 17:43:18 auth: Debug: master out: USER 413401089 d0122(a)alumnos.fi.upm.es home=/mail/alumnos/d0/d0122 quota_rule=*:storage=10240 Apr 15 17:43:18 imap-login: Info: Login: user=<d0122(a)alumnos.fi.upm.es>, method=PLAIN, rip=138.100.8.42, lip=138.100.8.17, mpid=13834, TLS Thanks and best regards Juan C. Blanco -- +----------------------------------------------------------------+ | Juan C. Blanco | | | | Centro de Calculo | | | Facultad de Informatica U.P.M. | E-mail: jcblanco(a)fi.upm.es | | Campus de Montegancedo | | | Boadilla del Monte | Tel.: (+34) 91 336 7466 | | 28660 MADRID (Spain) | Fax : (+34) 91 336 6913 | +----------------------------------------------------------------+

1 0

[Dovecot] How to purge mailboxes manually [dovecot_1.2.15]
by Emilio Nacelle 15 Apr '11

15 Apr '11

Hi, we have a linux network at the office. Mainly ubuntu and debian systems. Each user has it's own mail client, thunderbird, evolution, etc. In the mail server we use as the local delivery agent, dovecot 1.2.15 and the protocol imap. The users mailbox are in the server at /var/mail. Due to some kind of problem the mails that are set for delete in the mail client are not being deleted in the mailbox (if we check the mbox the mails are marked to be purged). Unless the owner uses something lowlevel shell mail client like pine to do the purge, the mails start to pile filling the account. Is this some known bug with a fix, or is there some routine we can run as admins to actually purged the mails set for deletion? (Like the "doveadm purge" in dovecot 2.0) Thanks a lot, looking forward to your answers, Emilio P.S: we would really like not having to install dovecot 2.0 :)

2 1

[Dovecot] Released Pigeonhole v0.2.3 for Dovecot v2.0.12
by Stephan Bosch 14 Apr '11

14 Apr '11

Hello Dovecot users, It's been a while since the last Pigeonhole release. This new release adds support for the new vacation-seconds extension, which allows the vacation extension to reply more frequently than every day and allows specifying this interval in seconds instead of days. I've also fixed quite a few bugs that were reported in the last couple of months. Changelog v0.2.3: * Sieve-filter tool: finished implementing basic functionality. It is not quite ready yet, but it is available for those willing to experiment with it (needs --with-unfinished-features config to compile). Also includes man page. + Vacation extension now inhibits replies to messages from sender listed in :addresses, thus preventing replies to one of the user's other known addresses. + Vacation extension: implemented the (draft) vacation-seconds extension. This also adds min/max period configuration settings. Refer to doc/vacation.txt for configuration information. - ManageSieve: fixed bug in UTF-8 checking of string values. This is done by discarding the original implementation and migrating to the Dovecot API's UTF-8 functionality. - Sieve command line tools now avoid initializing the mail store unless necessary. This prevents sievec and sieve-dump from failing when executed by root for example. - Enotify extension: fixed inappropriate return type in mailto URI parse function, also fixing ARM compiler warning. - Vacation extension: fixed handling of sendmail errors. It produced an additional confusing success message in case of error. - Removed header MIME-decoding to fix erroneous address parsing. Applies to address test and vacation command. - Fixed segfault bug in extension configuration, triggered when unknown extension is mentioned in sieve_extensions setting. The release is available as follows: http://www.rename-it.nl/dovecot/2.0/dovecot-2.0-pigeonhole-0.2.3.tar.gz http://www.rename-it.nl/dovecot/2.0/dovecot-2.0-pigeonhole-0.2.3.tar.gz.sig Refer to http://pigeonhole.dovecot.org and the Dovecot v2.0 wiki for more information. Have fun testing this new release and don't hesitate to notify me when there are any problems. Regards, -- Stephan Bosch stephan(a)rename-it.nl

1 0

[Dovecot] solved: disable_plaintext_auth = no per IP
by Andreas Schulze 14 Apr '11

14 Apr '11

found: remote 192.0.2.143/32 { disable_plaintext_auth = no } ( http://dovecot.org/list/dovecot/2011-February/057282.html ) -- Andreas Schulze Internetdienste | P252 DATEV eG 90329 Nürnberg | Telefon +49 911 319-0 | Telefax +49 911 319-3196 E-Mail info @datev.de | Internet www.datev.de Sitz: 90429 Nürnberg, Paumgartnerstr. 6-14 | Registergericht Nürnberg, GenReg Nr.70 Vorstand Prof. Dieter Kempf (Vorsitzender) Dipl.-Kfm. Wolfgang Stegmann (stellvertretender Vorsitzender) Dipl.-Kfm. Michael Leistenschneider Jörg Rabe v. Pappenheim Dipl.-Vw. Eckhard Schwarzer Vorsitzender des Aufsichtsrates: Reinhard Verholen

1 0

[Dovecot] disable_plaintext_auth = no per IP
by Andreas Schulze 14 Apr '11

14 Apr '11

Hello, I have disable_plaintext_auth=yes enabled. ( dovecot-2.0.12 ) But for one internel host I like to allow plaintext. Can somebody point me to the configuration ? I did not found it in the wiki2 ... Thanks Andreas -- Andreas Schulze Internetdienste | P252 DATEV eG 90329 Nürnberg | Telefon +49 911 319-0 | Telefax +49 911 319-3196 E-Mail info @datev.de | Internet www.datev.de Sitz: 90429 Nürnberg, Paumgartnerstr. 6-14 | Registergericht Nürnberg, GenReg Nr.70 Vorstand Prof. Dieter Kempf (Vorsitzender) Dipl.-Kfm. Wolfgang Stegmann (stellvertretender Vorsitzender) Dipl.-Kfm. Michael Leistenschneider Jörg Rabe v. Pappenheim Dipl.-Vw. Eckhard Schwarzer Vorsitzender des Aufsichtsrates: Reinhard Verholen

2 1

Re: [Dovecot] [LDA] save failed to INBOX: Timeout while waiting for lock
by Timo Sirainen 14 Apr '11

14 Apr '11

On Thu, 2011-04-14 at 10:18 +0200, Frank Bonnet wrote: > >>> mail_location = mbox:%h/:INDEX=/var/cache/dovecot/index/%u:INBOX=/var/mail/%u > > > > That's the way mbox format works. One IMAP or POP3 client can lock the mailbox for a long time. LDA can either wait longer of fail and let MTA retry the delivery later. The default is: > > > > mbox_lock_timeout = 5 mins > > > > So apparently the LDA already waited for 5 minutes for the lock. > > > > (There is also actually mail_max_lock_timeout setting, but the default is 0 = disabled.) > > > > Should I do something to correct ? I don't really know if there is anything except switching away from mbox. > When the problem occured some users were unable to access their mailboxes How long does it occur? You'd need to find out what exactly is locking those mailboxes for that long. It could simply be the user's client. Or I guess it could be LDA itself, or anything really.. Difficult to say. Difficult also to tell easy way to debug this.. Or when this happens does it happen to many people at the same time? Is the system load really high at that time then?

2 3

[Dovecot] [LDA] save failed to INBOX: Timeout while waiting for lock
by Frank Bonnet 14 Apr '11

14 Apr '11

Hello I use LDA Dovecot 2 with SIEVE as Postfix delivery agent and I occasionally get such message in syslog. info.log:Apr 13 12:39:40 lda(xxxxxxxx): Info: msgid=<4DA484FF.5060903(a)gmail.com>: save failed to INBOX: Timeout while waiting for lock See below the doveconf -n trace Thanks for any info > # 2.0.11: /usr/local/etc/dovecot/dovecot.conf > # OS: FreeBSD 8.2-RELEASE amd64 > auth_worker_max_count = 100 > debug_log_path = /var/log/dovecot/debug.log > default_client_limit = 6144 > default_process_limit = 1024 > disable_plaintext_auth = no > info_log_path = /var/log/dovecot/info.log > log_path = /var/log/dovecot/dovecot.log > mail_location = mbox:%h/:INDEX=/var/cache/dovecot/index/%u:INBOX=/var/mail/%u > managesieve_notify_capability = mailto > managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date > mbox_write_locks = fcntl > passdb { > driver = passwd > } > plugin/sieve = ~/.dovecot.sieve > plugin/sieve_dir = ~/sieve > postmaster_address = postmaster(a)esiee.fr > protocols = imap pop3 sieve sieve > sendmail_path = /usr/local/sbin/sendmail > service auth { > client_limit = 7169 > } > service imap-login { > inet_listener imap { > port = 143 > } > inet_listener imaps { > port = 993 > ssl = yes > } > process_min_avail = 10 > service_count = 1 > vsz_limit = 1 G > } > service imap { > process_limit = 2048 > vsz_limit = 1 G > } > service managesieve-login { > inet_listener sieve { > port = 4190 > } > inet_listener sieve_deprecated { > port = 2000 > } > } > service pop3-login { > inet_listener pop3 { > port = 110 > } > inet_listener pop3s { > port = 995 > ssl = yes > } > } > ssl_ca = /etc/ssl/RENATER/chain-1828-mail.esiee.fr.pem > ssl_cert = </etc/ssl/RENATER/cert-1828-mail.esiee.fr.pem > ssl_key = </etc/ssl/RENATER/mail.esiee.fr.key > userdb { > driver = passwd > } > verbose_proctitle = yes > protocol lda { > info_log_path = /var/log/dovecot/dovecot-lda.log > log_path = /var/log/dovecot/dovecot-lda-errors.log > mail_plugins = " sieve" > } > protocol imap { > imap_client_workarounds = tb-extra-mailbox-sep > } > protocol sieve { > managesieve_implementation_string = Dovecot Pigeonhole > } > mail# dovecof -n > /tmp/doveconf.txt > dovecof: Command not found. > mail# doveconf -n > /tmp/doveconf.txt > mail# wc -l /tmp/doveconf.txt > 75 /tmp/doveconf.txt > mail# cat /tmp/doveconf.txt > # 2.0.11: /usr/local/etc/dovecot/dovecot.conf > # OS: FreeBSD 8.2-RELEASE amd64 > auth_worker_max_count = 100 > debug_log_path = /var/log/dovecot/debug.log > default_client_limit = 6144 > default_process_limit = 1024 > disable_plaintext_auth = no > info_log_path = /var/log/dovecot/info.log > log_path = /var/log/dovecot/dovecot.log > mail_location = mbox:%h/:INDEX=/var/cache/dovecot/index/%u:INBOX=/var/mail/%u > managesieve_notify_capability = mailto > managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date > mbox_write_locks = fcntl > passdb { > driver = passwd > } > plugin/sieve = ~/.dovecot.sieve > plugin/sieve_dir = ~/sieve > postmaster_address = postmaster(a)esiee.fr > protocols = imap pop3 sieve sieve > sendmail_path = /usr/local/sbin/sendmail > service auth { > client_limit = 7169 > } > service imap-login { > inet_listener imap { > port = 143 > } > inet_listener imaps { > port = 993 > ssl = yes > } > process_min_avail = 10 > service_count = 1 > vsz_limit = 1 G > } > service imap { > process_limit = 2048 > vsz_limit = 1 G > } > service managesieve-login { > inet_listener sieve { > port = 4190 > } > inet_listener sieve_deprecated { > port = 2000 > } > } > service pop3-login { > inet_listener pop3 { > port = 110 > } > inet_listener pop3s { > port = 995 > ssl = yes > } > } > ssl_ca = /etc/ssl/x.pem > ssl_cert = </etc/ssl/y.pem > ssl_key = </etc/ssl/x.key > userdb { > driver = passwd > } > verbose_proctitle = yes > protocol lda { > info_log_path = /var/log/dovecot/dovecot-lda.log > log_path = /var/log/dovecot/dovecot-lda-errors.log > mail_plugins = " sieve" > } > protocol imap { > imap_client_workarounds = tb-extra-mailbox-sep > } > protocol sieve { > managesieve_implementation_string = Dovecot Pigeonhole > }

2 1

[Dovecot] Login via IMAP with MySQL as user database not working
by Chris Martin 13 Apr '11

13 Apr '11

Hello all, I am migrating from Postfix/Cyrus/MySQL mail server to a recently installed dovecot 1.2.8 on a QNAP TS259 NAS via XDove. I am unable to login via IMAP (the only method I've tried and the only method I want). I am using an almost identical database as the current existing Postfix/Cyrus/MySQL setup (with the except of paths). I have been attempting to get this working (off and on) for the past 5 months. During that time I have researched and researched, but have not found a solution. The Maildir has been copied from the existing server to the Dovecot server and have run the script 'courier-dovecot-migrate.pl', which was found at http://www.dovecot.org/tools/courier-dovecot-migrate.pl In a nutshell: If I have the password_query string in the SQL config file (shown below) set to return only 1 field, i.e. the password, then the Dovecot authtest app succeeds. But if more than 1 field is returned (i.e.: user and password) the test fails. And if testing with telnet I get the message of "* BYE Internal login failure. Refer to server log for more information.". The logs indicate that the password check returned OK but the userdb read appears to fail. If I change the userdb_query to return only 1 field (such as only the uid), then the logs show the correct value is returned, and yet the telnet login fails. So it seems that anytime there are multiple fields returned from the SQL query, the result is failure at that step (password check or userdb read). Therefore userdb prefetch never works. The NAS doesn't utilize a syslog so it's of no help in debugging. Below are the config files and samples from log files (scrubbed): dovecot.conf- (NOTE: the 'home = /tmp' in the plugin section is an attempt at rawlog from http://wiki2.dovecot.org/Debugging/Rawlog ... which doesn't seem to work) # 1.2.8: /etc/dovecot/dovecot.conf # OS: Linux 2.6.33.2 i686 log_path: /var/log/dovecot/dovecot.log info_log_path: /var/log/dovecot/dovecot-info.log log_timestamp: "%Y-%m-%d %H:%M:%S" protocols: imap ssl: no disable_plaintext_auth: no login_dir: /var/run/dovecot/login login_executable: /usr/libexec/dovecot/rawlog /usr/libexec/dovecot/imap-login login_user: _mailman last_valid_uid: 65000 first_valid_gid: 70 last_valid_gid: 65000 mail_debug: yes lda: postmaster_address: postmaster(a)example.com auth default: user: dovecot verbose: yes debug: yes debug_passwords: yes worker_max_count: 10 passdb: driver: sql args: /share/MD0_DATA/.qpkg/XDove/dovecot/etc/dovecot/dovecot-sql.conf userdb: driver: sql args: /share/MD0_DATA/.qpkg/XDove/dovecot/etc/dovecot/dovecot-sql.conf socket: type: listen client: path: /var/run/dovecot/auth-client mode: 432 master: path: /var/run/dovecot/auth-master mode: 384 plugin: home: /tmp dovecot-sql.conf- driver = mysql connect = host=127.0.0.1 user=<myuser> password=<mypass> dbname=users2 default_pass_scheme = CRYPT password_query = SELECT user, crypt AS `password` FROM users WHERE user = '%u' AND account_enabled = 'y' AND allow_email = 'y' user_query = SELECT uid, gid, homedir AS home, maildir AS mail FROM users WHERE user = '%u' AND account_enabled = 'y' AND allow_email = 'y' Sample from log "dovecot-info.log"- "2011-04-13 10:12:00" auth(default): Info: client in: AUTH 1 PLAIN service=imap secured lip=127.0.0.1 rip=127.0.0.1 lport=143 rport=36735 resp=AGNocmlzQNHhaWwuaG9tZWlwLm5ldABoYXBweTE= "2011-04-13 10:12:00" auth-worker(default): Info: sql(<user>@<domain>,127.0.0.1): query: SELECT user, crypt AS `password` FROM users WHERE user = '<user>@<domain>' AND account_enabled = 'y' AND allow_email = 'y' "2011-04-13 10:12:00" auth-worker(default): Info: auth(<user>@<domain>,127.0.0.1): username changed <user>@<domain> -> <User>@<Domain> "2011-04-13 10:12:00" auth-worker(default): Info: mysql: Connected to 127.0.0.1 (users2) "2011-04-13 10:12:02" auth(default): Info: client out: FAIL 1 user=<user>@<domain> temp Sample from log "dovecot.log"- "2011-04-13 10:12:00" auth(default): Error: worker-server( chris(a)sail.homeip.net,127.0.0.1) Aborted: Worker process died unexpectedly "2011-04-13 10:12:00" dovecot: Error: child 20136 (auth-worker) killed with signal 11 (core dumps disabled) If the password_query is changed to (only password returned): password_query = SELECT crypt AS `password` FROM users WHERE user = '%u' AND account_enabled = 'y' AND allow_email = 'y' then the logs are as follows: Sample from log "dovecot-info.log"- "2011-04-13 10:18:03" auth(default): Info: client in: AUTH 1 PLAIN service=imap secured lip=127. 0.0.1 rip=127.0.0.1 lport=143 rport=33662 resp=AGNocmlzQNHhaWwuaG9tZWlwLm5ldABoYXBweTE= "2011-04-13 10:18:03" auth-worker(default): Info: sql(<user>@<domain>,127.0.0.1): query: SELECT crypt AS `password` FROM users WHERE user = '<user>@<domain>' AND account_enabled = 'y' AND allow_email = 'y' "2011-04-13 10:18:03" auth(default): Info: client out: OK 1 user=<user>@<domain> "2011-04-13 10:18:03" auth(default): Info: master in: REQUEST 1 23395 1 "2011-04-13 10:18:03" auth-worker(default): Info: sql(<user>@<domain>,127.0.0.1): SELECT uid, gid, homedir AS home, maildir AS mail FROM users WHERE user = '<user>@<domain>' AND account_enabled = 'y' AND allow_email = 'y' "2011-04-13 10:18:03" auth(default): Info: master out: FAIL 1 "2011-04-13 10:18:03" imap-login: Info: Internal login failure (auth failed, 1 attempts): user=<<user>@<domain>>, method=PLAIN, rip=127.0.0.1, lip=127.0.0.1, secured "2011-04-13 10:18:03" auth-worker(default): Info: mysql: Connected to 127.0.0.1 (users2) Sample from log "dovecot.log"- "2011-04-13 10:18:03" auth(default): Error: worker-server(<user>@<domain>,127.0.0.1): Aborted: Worker process died unexpectedly "2011-04-13 10:18:03" dovecot: Error: child 23383 (auth-worker) killed with signal 11 (core dumps disabled) And finally, if change the user_query (to return only homedir AS home): then the logs are as follows: Sample from log "dovecot-info.log"- "2011-04-13 10:22:56" auth(default): Info: client in: AUTH 1 PLAIN service=imap secured lip=127.0.0.1 rip=127.0.0.1 lport=143 rport=35408 resp=AGNocmlzQNHhaWwuaG9tZWlwLm5ldABoYXBweTE= "2011-04-13 10:22:56" auth-worker(default): Info: sql(<user>@<domain>,127.0.0.1): query: SELECT crypt AS `password` FROM users WHERE user = '<user>@<domain>' AND account_enabled = 'y' AND allow_email = 'y' "2011-04-13 10:22:56" auth(default): Info: client out: OK 1 user=<user>@<domain> "2011-04-13 10:22:56" auth(default): Info: master in: REQUEST 1 23787 1 "2011-04-13 10:22:56" auth-worker(default): Info: sql(<user>@<domain>,127.0.0.1): SELECT homedir AS home FROM users WHERE user = '<user>@<domain>' AND account_enabled = 'y' AND allow_email = 'y' "2011-04-13 10:22:56" auth(default): Info: master out: USER 1 <user>@<domain> home=/Users/<user> "2011-04-13 10:22:56" imap-login: Info: Internal login failure (auth failed, 1 attempts): user=<<user>@<domain>>, method=PLAIN, rip=127.0.0.1, lip=127.0.0.1, secured Sample from log "dovecot.log"- "2011-04-13 10:22:56" dovecot: Error: User <user>@<domain> is missing UID (see mail_uid setting) Greatly appreciate any help that anyone can give. Chris

2 1

[Dovecot] Dovecot-lda and multiple records after filter.
by Басов Евгений 13 Apr '11

13 Apr '11

Hello. Some records in my LDAP base have same values in mail field: # extended LDIF # # LDAPv3 # base <ou=Mail, dc=ph, dc=local> with scope subtree # filter: (&(mail=someuser(a)p.ru)(|(AccountStatus=active)(accountStatus=shared))) # requesting: mailMessageStore # dn: cn=lala,ou=Mail,dc=ph,dc=local mailMessageStore: /var/mail/someuser/Maildir/ # Eset, Mail, ph.local dn: cn=Eset,ou=Mail,dc=ph,dc=local # admins, Mail, ph.local dn: cn=admins,ou=Mail,dc=ph,dc=local # search result search: 2 result: 0 Success # numResponses: 4 # numEntries: 3 Postfix with virtual_transport = virtual works fine: letter to "dn: cn=lala,ou=Mail,dc=ph,dc=local" stolen in mailMessageStore path and one for mailing list "dn: cn=admins,ou=Mail,dc=ph,dc=local"/"dn: cn=admins,ou=Mail,dc=ph,dc=local" are send to "dn: cn=lala,ou=Mail,dc=ph,dc=local". One of filter Postfix uses: (&(|(mail=%s)(mailAlternateAddress=%s))(|(AccountStatus=active)(accountStatus=shared))) So, set on dovecot-lda. main.cf: dovecot_destination_recipient_limit = 1 virtual_transport = dovecot #virtual_transport = virtual master.cf: dovecot unix - n n - - pipe flags=DRhu user=vmail:mail argv=/usr/libexec/dovecot/deliver -f ${sender} -d ${recipient} one place in dovecot-ldap.ext.conf: user_filter = (&(objectClass=qmailUser)(|(AccountStatus=active)(accountStatus=shared))(|(mail=%u)(mailAlternateAddress=%u))) pass_filter = (&(objectClass=qmailUser)(|(AccountStatus=active)(accountStatus=shared))(|(mail=%u)(mailAlternateAddress=%u))) user_attrs = mailMessageStore=home pass_attrs = uid=user,userPassword=password Send test letter: mutt -s "test $(date +%d/%m/%Y:%H.%M)" -- someuser(a)p.ru < /dev/null and get in log: dovecot: lda: Debug: Module loaded: /usr/lib64/dovecot/lib90_sieve_plugin.so dovecot: auth: Debug: master in: USER#0111#011someuser(a)p.ru#011service=lda dovecot: auth: Debug: ldap(someuser(a)p.ru): user search: base=ou=Mail, dc=ph, dc=local scope=subtree filter=(&(objectClass=qmailUser)(|(AccountStatus=active)(accountStatus=shared))(|(mail=someuser@p.ru)(mailAlternateAddress=someuser@p.ru))) fields=mailMessageStore dovecot: auth: Debug: ldap(someuser(a)p.ru): result: mailMessageStore(home)=/var/mail/someuser/Maildir/ dovecot: auth: Error: ldap(someuser(a)p.ru): user_filter matched multiple objects, aborting dovecot: auth: Debug: master out: FAIL#0111 dovecot: lda: Error: user someuser(a)p.ru: Auth USER lookup failed dovecot: lda: Debug: auth input: dovecot: lda: Fatal: Internal error occurred. Refer to server log for more information. postfix/pipe[3259]: 89001846: to=<someuser(a)p.ru>, relay=dovecot, delay=0.15, delays=0.07/0.01/0/0.07, dsn=4.3.0, status=deferred (temporary failure) As we can see mailMessageStore gets right value and… it's all. How can I get Postfix-like behavior from dovecot-lda? With best regards, Basov Evgeny.

1 0

[Dovecot] Problems with thunderbird
by Jim Knuth 13 Apr '11

13 Apr '11

Hello, Since the Upgrade on V 2.0.12 I can produce with Thunderbird no connection. With Roundcube it is easily possible. I have changed something in no configuration. Does somebody have a tip? # 2.0.12: /etc/dovecot/dovecot.conf # OS: Linux 2.6.29.4-default i686 Debian wheezy/sid auth_master_user_separator = * auth_mechanisms = plain login auth_verbose = yes disable_plaintext_auth = no lda_mailbox_autocreate = yes lda_mailbox_autosubscribe = yes listen = * login_greeting = Mailserver ready. mail_location = maildir:~/Maildir managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date passdb { driver = pam } plugin { autocreate = Entwurf autocreate2 = Spam autosubscribe = Entwurf autosubscribe2 = Spam quota = maildir:User quota quota_exceeded_message = Der Mail-Speicher ist voll. Siehe: http://www.art-domains.de/quota.html quota_warning = storage=95%% quota-warning 95 %u quota_warning2 = storage=75%% quota-warning 75 %u sieve_before = /etc/dovecot/sieve/global/global.sieve sieve_dir = %h/sieve sieve_global_dir = /etc/dovecot/sieve/global/ sieve_global_path = /etc/dovecot/sieve/global/global.sieve trash = /etc/dovecot/dovecot-trash.conf.ext } protocols = imap pop3 sieve service auth { unix_listener /var/spool/postfix/private/auth { group = postfix mode = 0660 user = postfix } unix_listener auth-master { mode = 0600 } } service imap-login { client_limit = 128 process_limit = 256 service_count = 0 vsz_limit = 64 M } service managesieve-login { inet_listener sieve { port = 4190 } service_count = 1 vsz_limit = 64 M } service pop3-login { client_limit = 128 process_limit = 256 service_count = 0 vsz_limit = 64 M } service quota-warning { executable = script /usr/sbin/quota-warning.sh unix_listener quota-warning { user = vmail } user = dovecot } ssl_cert = </etc/ssl/certs/dovecot.pem ssl_key = </etc/ssl/private/dovecot.pem userdb { args = /etc/dovecot/passwd.quota driver = passwd-file } verbose_proctitle = yes protocol sieve { mail_max_userip_connections = 10 managesieve_implementation_string = Dovecot Pigeonhole managesieve_logout_format = bytes=%i/%o managesieve_max_compile_errors = 5 managesieve_max_line_length = 65536 } protocol imap { imap_client_workarounds = mail_fsync = never mail_plugins = " quota autocreate imap_quota trash" } protocol pop3 { mail_fsync = never mail_plugins = " quota trash" pop3_client_workarounds = outlook-no-nuls oe-ns-eoh pop3_lock_session = yes pop3_uidl_format = %v-%u } protocol lda { mail_fsync = optimized mail_plugins = " quota sieve trash" postmaster_address = postmaster(a)art-domains.de } protocol lmtp { mail_plugins = " quota sieve trash" } -- Mit freundlichen Grüßen, Jim Knuth P.S.: Bitte senden Sie KEINE HTML-Mails!

2 4

Re: [Dovecot] Upgraded to Dovecot-1.2.16 and Sieve-1.1.8 but Still No Sieve Parameters
by Jay Welch 13 Apr '11

13 Apr '11

So I have to manually put in the parameters in the dovecot.conf file? I assumed that they would have been added to the dovecot-example.conf file once I installed Sieve. Am I correct? On 4/12/2011 12:48 PM, Frank Bonnet wrote: > this could help you > > http://wiki.dovecot.org/ManageSieve/Configuration > > Le 12/04/2011 21:43, Jay Welch a écrit : >> I have upgraded to a newer version of Dovecot and I have installed >> Sieve. Everything went smooth and with no errors but I still don't see >> any Sieve parameters in dovecot.conf file. I'm looking at >> /usr/local/etc/dovecot-example.conf. What could be the issue? >> >> Thanks >> -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean.

3 7

[Dovecot] information
by drum.lucas＠gmail.com 13 Apr '11

13 Apr '11

Hi! I have this in my dovecot logs... dovecot-auth: pam_succeed_if(dovecot:auth): error retrieving information about user access What is this? Anybody is traying login with user "access"? Spam? Vírus? thanks!!!! -- Atenciosamente; Graciously; *Lucas Possamai * http://psyscrew.posterous.com/ "Na palma da tua mão existem sonhos, felicidades e a força que te guia por um caminho, que somente você poderá trilhar, com o olhar tranquilo saberás onde chegar.o fim é apenas mais um ponto para inventar uma nova conquista."* *

1 0

Re: [Dovecot] Problem with expire plugin and expunge
by Christoph Pleger 13 Apr '11

13 Apr '11

Hello, > It looks like it expunged all the messages from Trash. Did you check if > that happened? Did it expunge too many messages? > > > Mar 18 09:50:28 joseph dovecot: imap(christoph): Debug: expire: Saving > > first message to Trash, updating timestamp to 1300438228 > > This happens, because it thinks the Trash was empty.. Is there any solution in sight for this? Is there some additional information I can give you for solving that problem? Regards Christoph

2 4

[Dovecot] Solaris 10 Compilation Issue with 2.0.12 (actually post 12690) [WORKAROUND PROVIDED]
by Peter Bray 13 Apr '11

13 Apr '11

Greetings, Post 12689:7f5735ab7c35 / 12690:02829f7f79c7 dovecot uses the reentrant version of get(password/group)* related functions. There are two variants of these functions on Solaris. To get the variant used by dovecot code based you need to define _POSIX_PTHREAD_SEMANTICS (see attached manual page). Initially I defined this just for the compilation of lib/src/ipwd.c, and got the code to compile / check / run successfully in my environment. After this worked I decided to try compiling the whole code base with CPPFLAGS="-D_POSIX_PTHREAD_SEMANTICS" ./configure .... This also seems to work fine. My environment uses IMAPS (X86) and Proxying IMAPS (SPARC). All code compiles / checks / runs (only 64-bit versions run tested) with the above CPPFLAGS modification on Oracle Solaris 10 Update 9 (both 32/64 bit on both X86 / SPARC with GCC 4.1.2) systems. Regards, Peter Bray Sydney, Australia PS: I have not investigated an appropriate way to modified configure.in to make this addition automatic.

2 1

Re: [Dovecot] SUMMARY: LDA vs LMTP, Cyrus SASL, verbose_proctitle
by Joseph Tam 13 Apr '11

13 Apr '11

Timo Sirainen <tss(a)iki.fi> wrote: > On Mon, 2011-04-11 at 18:19 -0700, Joseph Tam wrote: > > > Also, one significant advantage not mentioned for LMTP was that one > > delivery failure to multiple recipients can be disambiguated; LDA can only > > return an exit code to be tested by the MTA, but the MTA cannot know > > which recipient(s) generated the error. > > In almost all setups MTA delivers mails to LDA one at a time. Multiple > deliveries are useful only if you want to try to get the same mail file > hard linked to all recipients. So normally this is a non-issue. I guess my sendmail is not normal. The default configuration does pool multiple recipient delivery and run mail.local with all these users as arguments in one invocation. dovecot-lda doesn't seem to support multiple recipients per invocation, so this won't be a problem. The implication for sendmail users, though, is that multiple concurrent deliveries must be disabled if you use dovecot-lda (the 'm' flag must be removed from LOCAL_MAILER_FLAGS) as implicitely done in http://wiki2.dovecot.org/LDA/Sendmail I notice the 'A' flag is missing here: doesn't this kill aliasing? If and when I can fully test my setup, I will update this page. > > echo "main(int c,char**v){**v='x';sleep(9);}" | \ > > gcc -xc -o y -; ./y; rm y & > > ps -f > > IIRC /usr/ucb/ps shows the changes. Ah. I'll take your word for it since I only have the SysV stuff installed. Thanks for the info. Joseph Tam <jtam.home(a)gmail.com>

1 0

[Dovecot] Best practices to migrate from mbox to Maildir++ and also changing the deliver method
by Julio C. Ortega 13 Apr '11

13 Apr '11

Greetings. Im about to move from mbox to Maildir++ and change the deliver method from procmail. I have less than 100 accounts, but there's a lot of mail (around 16GB) Apart from the documentation on Dovecot's site, anyone has good recommendations, and, if you have experience doing this migration any tips? Thanks for any info, and wishing you all a nice week -- ------------------------------------ Julio C. Ortega ONUVA http://www.onuva.com

2 1

[Dovecot] Upgraded to Dovecot-1.2.16 and Sieve-1.1.8 but Still No Sieve Parameters
by Jay Welch 12 Apr '11

12 Apr '11

I have upgraded to a newer version of Dovecot and I have installed Sieve. Everything went smooth and with no errors but I still don't see any Sieve parameters in dovecot.conf file. I'm looking at /usr/local/etc/dovecot-example.conf. What could be the issue? Thanks -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean.

1 0

[Dovecot] v2.0.12 released
by Timo Sirainen 12 Apr '11

12 Apr '11

http://dovecot.org/releases/2.0/dovecot-2.0.12.tar.gz http://dovecot.org/releases/2.0/dovecot-2.0.12.tar.gz.sig Many small fixes, plus some more noticeable: + doveadm: Added "move" command for moving mails between mailboxes. + virtual: Added support for "+mailbox" entries that clear \Recent flag from messages (default is to preserve them). - dbox: Fixes to handling external attachments - dsync: More fixes to avoid hanging with remote syncs - dsync: Many other syncing/correctness fixes - doveconf: v2.0.10 and v2.0.11 didn't output plugin {} section right BTW. I'm moving again next weekend, this time to Helsinki. Hopefully I'll be living there for a while. :)

2 1

[Dovecot] Questions about converting maildir to mdbox.
by Henrique Fernandes 12 Apr '11

12 Apr '11

First of all i would like to thanks Timo for the excellent job done in dovecot. We are using it in you prodution server with about 5 millions of emails and it is pretty good, only a performance problens but i guess it is realated to ocfs2 that we are using. So lets begin: We are using dovecot 2.0.6 with maildir in an ocfs2 partiton. It is pretty slow access in peak time, but it is related to ocfs2 as i said before, i am trying to mimimize the ocfs2 latancy by using mdbox. Another problem that we have are Full backup that takes about 24h and incremental takes about 13h I am thinking in converting some email for testing propose, but i am wondoring how would dovecot convert this, like if i convert all mail from maildir to mdbox it would make many mailbox based on this seetings ? Or in the first convert it would make a big mdbox file and after it it will rotate by day or it would make many boxes just based on size? mdbox_rotate_size = 5m mdbox_rotate_interval = 1d Well, another thing can i make rotate interval happens in a certain time of day? end from where it takes this time ? it rotates at midnight ? Another one!, if i lose the index files what really happens ? Sometimes in my server the index get corrupet and as i am reading mdbox index files held information that is not in other place. So what should i do to prevent any possible lose of data even if i lose the indexes? I was reading about backup restore also, but i did not get it pretty well. With maildir we simple restore the files and the index gets rebuilt! What should i do with mdbox ? Restore the files and the index ? But how about the other emails that the account got after the backup, how i should merge the multiple files and more importanet how do i merge the index files ? Well, sorry about my english! And Thanks alot guys! []'sf.rique

3 4

[Dovecot] Vpopmail and lastauth
by mailing＠securitylabs.it 12 Apr '11

12 Apr '11

Hello, I'm migrating many accounts to a new server with vpopmail 5.4.33 and dovecot 2.0.11. I've already vpopmail 5.4.32 and dovecot 1.2.16 on others servers running without problems. With dovecot 2.0.11 my lastauth file is not updated. This file usually is update on any access (smtp, pop3, imap) with the client's IP, for every mailbox. Now it's updated only when a client authenticate itself via SMTP (smtp-auth with qmail + vpopmail), and not with imap/pop3 access. My conf: # 2.0.11: /usr/local/etc/dovecot/dovecot.conf # OS: Linux 2.6.32-5-amd64 x86_64 Debian 6.0.1 auth_cache_negative_ttl = 2 mins auth_cache_size = 1000 M auth_cache_ttl = 2 mins auth_mechanisms = plain cram-md5 apop auth_username_chars = abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ01234567890.-_@& disable_plaintext_auth = no first_valid_uid = 89 last_valid_uid = 95 lock_method = dotlock log_timestamp = "%Y-%m-%d %H:%M:%S " login_greeting = Server ready. mail_fsync = never mail_gid = vchkpw mail_location = maildir:~/Maildir mail_privileged_group = vchkpw mail_uid = vpopmail namespace { inbox = yes location = prefix = INBOX. separator = . type = private } passdb { args = webmail=127.0.0.1 driver = vpopmail } plugin/mail_log_events = delete expunge plugin/mail_log_group_events = plugin/quota = maildir plugin/quota_rule = ?:storage=0 pop3_uidl_format = %f protocols = imap pop3 service auth { unix_listener auth-userdb { group = vchkpw mode = 0600 user = vpopmail } } service imap-login { client_limit = 256 process_limit = 128 process_min_avail = 3 service_count = 1 } service imap { drop_priv_before_exec = yes process_limit = 256 vsz_limit = 256 M } service pop3-login { client_limit = 256 process_limit = 128 process_min_avail = 3 service_count = 1 } service pop3 { drop_priv_before_exec = yes process_limit = 256 vsz_limit = 256 M } ssl_cert = </usr/local/etc/dovecot/dovecot.crt ssl_key = </usr/local/etc/dovecot/dovecot.key userdb { args = quota_template=quota_rule=*:backend=%q driver = vpopmail } protocol imap { mail_max_userip_connections = 10 mail_plugins = " notify quota imap_quota mail_log" }

3 4

[Dovecot] SUMMARY: LDA vs LMTP, Cyrus SASL, verbose_proctitle
by Joseph Tam 12 Apr '11

12 Apr '11

A summary of answers I got to the questiosn I posed. > Is there a reason I should prefer LMTP over LDA for local delivery? Thanks for the responses I received. The benefits reported were more/better information logging, and service isolation. Also, one significant advantage not mentioned for LMTP was that one delivery failure to multiple recipients can be disambiguated; LDA can only return an exit code to be tested by the MTA, but the MTA cannot know which recipient(s) generated the error. This problem present can itself, for example, when one user has a full mailbox. An LDA will return EX_TEMPFAIL, and the message will be requeued, and delivery will be retried for all recipients (even those that were successfully delivered to). > The Wiki doesn't differentiates LMTP vs LDA with respect to sendmail > configuration, so am I correct that I just need to replace mail.local > with dovecot-lda, which will choose LDA/LMTP based on dovecot.conf? Not that simple, but I finally did find my answer in the Dovecot archives. It's too bad I had to spend hours tearing apart the sendmail docs before finding it http://www.dovecot.org/list/dovecot/2010-September/052936.html The .mc version of the configuration: # Use LMTP for local delivery over IPC channel FEATURE(`local_lmtp',`[IPC]') # Location of LMTP socket define(`LOCAL_MAILER_ARGS', `FILE /path/to/dovecot/lmtp') # Replace default sendmail LMTP options: the same options # with the 'P' flag removed so that the Return-Path is not # added (again?) define(`LOCAL_MAILER_FLAGS', `SXmnz9') MAILER(`local') I haven't tried this yet, but this is pretty close. > Also, can I consolidate authentication by configuring dovecot to use > what sendmail uses (Cyrus SASL) or vice versa? The Wiki hints this is > in the works. No response, so I guess the answer is no. > Lastly, toggling verbose_proctitle seems to have no effect on the output > of ps. Is verbose_proctitle broken for Solaris? The answer to is verbose_proctitle is broken for Solaris. There is no setproctitle(), and ps does not report changes to a process's argv[]: echo "main(int c,char**v){**v='x';sleep(9);}" | \ gcc -xc -o y -; ./y; rm y & ps -f You'll have to use "lsof", "pfiles" or "doveadm who" to get the information. Joseph Tam <jtam.home(a)gmail.com>

3 2

[Dovecot] Intermitent ldap auth problems benchmarking dovecot
by Maria Arrea 12 Apr '11

12 Apr '11

Hello We are using SLAMD (Distributed Load Generation Engine, www.slamd.com) to benchmark our dovecot server (ldap auth). We are simulating 2.000 simultaneous logins and 20% of them fail. We saw the following errors in the log: Apr 12 09:40:07 buzon dovecot: auth: Error: ldap(correo,192.168.4.153): Request queue is full (oldest added 1 secs ago) Apr 12 09:40:07 buzon dovecot: auth: Error: ldap(correo,192.168.4.153): Request queue is full (oldest added 1 secs ago) Apr 12 09:40:07 buzon dovecot: auth: Error: ldap(correo,192.168.4.153): Request queue is full (oldest added 1 secs ago) We increased auth_worker_max_count from 350 to 3500 (10x increase). Now we see the following errors (still 20% of logins fail): Apr 12 10:14:45 buzon dovecot: imap-login: Internal login failure (pid=29016 id=24783) (auth failed, 1 attempts): user=<correo>, method=PLAIN, rip=192.168.4.153, lip=192.168.4.80, mpid=21284 Apr 12 10:14:45 buzon dovecot: imap-login: Internal login failure (pid=29016 id=24784) (auth failed, 1 attempts): user=<correo>, method=PLAIN, rip=192.168.4.153, lip=192.168.4.80, mpid=21286 What are we doing wrong? We expect 1000 simultaneous imap sessions, we have 65.000 mailboxes. This is our doveconf -n output # 2.0.11: /etc/dovecot/dovecot.conf # OS: Linux 2.6.18-238.5.1.el5 x86_64 Red Hat Enterprise Linux Server release 5.6 (Tikanga) ext4 auth_debug = yes auth_master_user_separator = * auth_mechanisms = plain login auth_worker_max_count = 3500 base_dir = /var/run/dovecot/ default_client_limit = 5000 default_process_limit = 6500 disable_plaintext_auth = no imap_client_workarounds = tb-extra-mailbox-sep delay-newmail lda_mailbox_autocreate = yes lda_mailbox_autosubscribe = yes mail_fsync = never mail_gid = entrega mail_home = /buzones/%2.26Hn/%2.200Hn/%n/ mail_location = mdbox:/buzones/%2.26Hn/%2.200Hn/%n:INDEX=/indices_dovecot/indices/%2.26Hn/%2.200Hn/%n mail_max_userip_connections = 15000 mail_plugins = " zlib acl" mail_uid = entrega managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date mdbox_rotate_interval = 1 days mdbox_rotate_size = 60 M passdb { args = /etc/dovecot/dovecot-ldap.conf driver = ldap } passdb { args = /etc/usuario_maestro.txt driver = passwd-file master = yes } passdb { args = /etc/dovecot/dovecot-ldap.conf driver = ldap } plugin/acl = vfile plugin/quota = dict:Cuota de usuario::file:/buzones/cuotas/%n plugin/quota_rule2 = Trash:storage=+10%% plugin/quota_warning = storage=95%% /usr/local/bin/quota-warning.sh 95 plugin/quota_warning2 = storage=80%% /usr/local/bin/quota-warning.sh 80 plugin/sieve = /buzones/%2.26Hn/%2.200Hn/%n/dovecot.sieve plugin/sieve_dir = /buzones//%2.26Hn/%2.200Hn/%n/sieve/ plugin/zlib_save = gz plugin/zlib_save_level = 9 protocols = pop3 imap sieve service anvil { client_limit = 25000 } service auth { client_limit = 28000 unix_listener auth-master { user = entrega } unix_listener auth-userdb { user = entrega } user = root } service imap-login { executable = /usr/libexec/dovecot/imap-login group = dovenull service_count = 0 } service imap { executable = /usr/libexec/dovecot/imap process_limit = 6000 } service managesieve-login { executable = /usr/libexec/dovecot/managesieve-login inet_listener sieve { port = 2000 } process_limit = 2000 } service managesieve { executable = /usr/libexec/dovecot/managesieve process_limit = 5000 } service pop3-login { executable = /usr/libexec/dovecot/pop3-login process_limit = 4000 service_count = 0 } service pop3 { executable = /usr/libexec/dovecot/pop3 process_limit = 4000 } ssl_ca = </etc/pki/generico/cacert.crt.pem ssl_cert = </etc/pki/generico/wildcard.crt ssl_key = </etc/pki/generico/wildcard-key.pem userdb { args = /etc/dovecot/dovecot-ldap.conf driver = ldap } userdb { args = /etc/dovecot/dovecot-ldap-userdb.conf driver = ldap } verbose_proctitle = yes protocol sieve { managesieve_implementation_string = dovecot managesieve_logout_format = bytes=%i/%o managesieve_max_line_length = 65536 } protocol lda { hostname = us.es info_log_path = log_path = mail_fsync = optimized mail_plugins = sieve zlib postmaster_address = evcorreo(a)domain.es syslog_facility = mail } protocol imap { mail_plugins = zlib } protocol pop3 { mail_plugins = zlib pop3_enable_last = yes pop3_uidl_format = %g }

3 3

[Dovecot] Fwd: .dovecot.sieve as Mailbox
by Francisco Wagner C. Freire 12 Apr '11

12 Apr '11

---------- Forwarded message ---------- From: Francisco Wagner C. Freire <wgrcunha(a)gmail.com> Date: Tue, Apr 12, 2011 at 9:20 AM Subject: Re: [Dovecot] .dovecot.sieve as Mailbox To: Jan Phillip Greimann <jg(a)softjury.de> Yeah, i can do that, or change the user homedir, but i need some time to change scripts. But, is normal to dovecot show a file as a mailbox? And have any kind of option to hide this one? On Tue, Apr 12, 2011 at 9:15 AM, Jan Phillip Greimann <jg(a)softjury.de>wrote: > > > Am 12.04.2011 14:08, schrieb Francisco Wagner C. Freire: > > Hello, > Hi there, > > > > > I current using maildir and mail location is: > > *mail_location = maildir:%h:INDEX=%h/cache* > > > > Any tip to hide this to users? > > what's about > sieve_dir = ~/sieve > in 90-sieve.conf? > > must the sieve-files be in ~/ ? > > > > > Sorry for my bad english :) > Sorry for my bad english too ^^ > > Greetings Jan P. Greimann > Administrator (in training) > >

3 4

[Dovecot] .dovecot.sieve as Mailbox
by Francisco Wagner C. Freire 12 Apr '11

12 Apr '11

Hello, I current using dovecot 2.0.11 and with all other 2x versions occurring the same problem. When i create the file .dovecot.sieve and compiled one .dovecot.svbin on user homedir, the imap show it like a folder, example: doveadm mailbox list -u user(a)domain.com .. .. *dovecot.sieve* *dovecot.svbin* .. .. I current using maildir and mail location is: *mail_location = maildir:%h:INDEX=%h/cache* Any tip to hide this to users? Sorry for my bad english :) Att. Francisco Freire System Administrator

3 2

[Dovecot] trying to combine static userdb with LDAP passdb with per-user userdb_mail and userdb_home
by Igor Zinovik 12 Apr '11

12 Apr '11

Hello, dovecot users. I'm trying to cope with following problem I have single computer which will be going to be final destination for several virtual domains. Domains are stored in LDAP catalog. Dovecot will be working together with Postfix MTA running on same computer. I'm a bit confused how to achieve following thing: I want Postfix to use Dovecot LMTP server for mail delivery. All my mail is located under /var/vmail partition. I designed my own ldap schema and according to dovecot documentation that user should always has home and mail directory i added separate attributes for user home and mail. My typical user that is stored in LDAP has homeDirectory (which stores value like /var/vmail/domain.com/j/joe) and mailMessageStore (which stores value like /var/vmail/domain.com/j/joe/Maildir). All data under /var/vmail is owned by Postfix MTA user (which is called `postfix', uid=89). After reading dovecot documentation I understand that my setup needs to combine static userdb with LDAP passdb. But i also want dovecot to be able to deliver mail for local system users (that are stored in /etc/passwd). For system users i want to store their mail in $HOME/Mail. So i set mail_location = ~/Mail (which turns into /home/user/Mail), but for virtual (which are stored in LDAP) users i want to set mail (or maybe i should write here userdb_mail) to LDAP value mailMessageStore. Seems to me that LMTP server needs separate userdb query to fetch mail_location from LDAP. Setting mail_location = /var/vmail/%d/%n1/%u solves my problem, but I want dovecot to dynamically fetch maildir location from LDAP. Maybe in near future I would also store mail somewhere else not only under /var/vmail. And dovecot will fetch this information from LDAP. Here is excerpt from dovecot log when user tries to login: Apr 11 13:32:29 auth: Debug: Loading modules from directory: /usr/lib64/dovecot/auth Apr 11 13:32:29 auth: Debug: Module loaded: /usr/lib64/dovecot/auth/libauthdb_ldap.so Apr 11 13:32:29 auth: Debug: Module loaded: /usr/lib64/dovecot/auth/libdriver_mysql.so Apr 11 13:32:29 auth: Debug: Module loaded: /usr/lib64/dovecot/auth/libdriver_pgsql.so Apr 11 13:32:29 auth: Debug: Module loaded: /usr/lib64/dovecot/auth/libdriver_sqlite.so Apr 11 13:32:29 auth: Debug: Module loaded: /usr/lib64/dovecot/auth/libmech_gssapi.so Apr 11 13:32:29 auth: Debug: auth client connected (pid=14748) Apr 11 13:32:29 auth: Debug: client in: AUTH 1 PLAIN service=imap lip=172.20.21.26 rip=172.20.20.216 lport=143 rport=1227 resp=<hidden> Apr 11 13:32:29 auth: Debug: ldap(joe(a)domain.com,172.20.20.216): pass search: base=pdomain=domain.com,ou=mail,dc=org,dc=ru scope=onelevel filter=(&(objectClass=mailAccount)(uid=joe)(accountStatus=TRUE)) fields=mail,userPassword,mailQuota,homeDirectory,mailMessageStore Apr 11 13:32:29 auth: Debug: ldap(joe(a)domain.com,172.20.20.216): result: mail(user)=joe(a)domain.com mailQuota(userdb_quota_rule=*:bytes=%$)=1073741824 mailMessageStore(userdb_mail)=/var/vmail/domain.com/p/joe/Maildir homeDirectory(userdb_home)=/var/vmail/domain.com/p/joe userPassword(password)=<hidden> Apr 11 13:32:29 auth: Debug: client out: OK 1 user=joe(a)domain.com Apr 11 13:32:29 auth: Debug: master in: REQUEST 2814377985 14748 1 5e00190b4fbfd1a4b8a50e13fa6562b1 Apr 11 13:32:29 auth: Debug: master out: USER 2814377985 joe(a)domain.com uid=89 gid=89 Apr 11 13:32:29 imap-login: Info: Login: user=<joe(a)domain.com>, method=PLAIN, rip=172.20.20.216, lip=172.20.21.26, mpid=14750 Apr 11 13:32:29 imap: Debug: Loading modules from directory: /usr/lib64/dovecot Apr 11 13:32:29 imap: Debug: Module loaded: /usr/lib64/dovecot/lib10_quota_plugin.so Apr 11 13:32:29 imap: Debug: Module loaded: /usr/lib64/dovecot/lib11_imap_quota_plugin.so Apr 11 13:32:29 imap: Debug: Module loaded: /usr/lib64/dovecot/lib11_trash_plugin.so Apr 11 13:32:29 imap: Debug: Module loaded: /usr/lib64/dovecot/lib20_autocreate_plugin.so Apr 11 13:32:29 imap: Debug: Module loaded: /usr/lib64/dovecot/lib20_expire_plugin.so Apr 11 13:32:29 imap(joe(a)domain.com): Debug: Effective uid=89, gid=89, home= Apr 11 13:32:29 imap(joe(a)domain.com): Debug: Quota root: name=User quota backend=maildir args= Apr 11 13:32:29 imap(joe(a)domain.com): Debug: Quota rule: root=User quota mailbox=* bytes=1073741824 messages=0 Apr 11 13:32:29 imap(joe(a)domain.com): Debug: Quota warning: bytes=1020054732 (95%) messages=0 reverse=no command=/usr/libexec/dovecot/quota-warning.sh 95 joe(a)domain.com domain.com Apr 11 13:32:29 imap(joe(a)domain.com): Debug: Quota warning: bytes=966367641 (90%) messages=0 reverse=no command=/usr/libexec/dovecot/quota-warning.sh 90 joe(a)domain.com domain.com Apr 11 13:32:29 imap(joe(a)domain.com): Debug: Quota warning: bytes=858993459 (80%) messages=0 reverse=no command=/usr/libexec/dovecot/quota-warning.sh 80 joe(a)domain.com domain.com Apr 11 13:32:29 imap(joe(a)domain.com): Error: user joe(a)domain.com: Initialization failed: Initializing mail storage from mail_location setting failed: Home directory not set for user. Can't expand ~/ for mail root dir in: ~/Mail Apr 11 13:32:29 imap(joe(a)domain.com): Error: Invalid user settings. Refer to server log for more information. Here is my ldap query: pass_filter = (&(objectClass=mailAccount)(uid=%n)(accountStatus=TRUE)) # ldap_attr = dovecot_variable pass_attrs = mail=user, userPassword=password, mailQuota=userdb_quota_rule=*:bytes=%$,\ homeDirectory=userdb_home, mailMessageStore=userdb_mail What is the best way to do in my situation? Should i just add two attributes to each LDAP user like mailuid and mailgid and set both these variables to `postfix'. Or maybe i should just forget about mail for local system users and just user `prefetch' userdb. I'm just mazed about dovecot userdb and passdb queries. It so powerful but also so hard to understand. I would appreciate any help, since I peck dovecot authentication and userdb-passdb queries like woodpecker starting from last week. Do I understand right that dovecot during userdb fetches Unix UID which will be used to access data on disk? I just want postfix (uid=89) to allow to do this. Here is `dovecot -n' output: # 2.0.11: /etc/dovecot/dovecot.conf # OS: Linux 2.6.18-238.1.1.1.el5 x86_64 CentOS release 5.5 (Final) auth_debug = yes auth_failure_delay = 3 secs auth_mechanisms = plain login auth_verbose = yes base_dir = /var/run/dovecot/ disable_plaintext_auth = no first_valid_gid = 89 first_valid_uid = 89 last_valid_gid = 89 last_valid_uid = 89 listen = * log_path = /var/log/dovecot login_greeting = Dovecot ready to serve. mail_debug = yes mail_fsync = always mail_location = maildir:~/Mail mail_nfs_index = yes mail_nfs_storage = yes managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date imapflags mmap_disable = yes passdb { args = /etc/dovecot/dovecot-ldap.conf driver = ldap } plugin/autocreate = &BBoEPgRABDcEOAQ9BDA- plugin/autocreate2 = &BCEEPwQwBDw- plugin/autosubscribe = &BBoEPgRABDcEOAQ9BDA- plugin/autosubscribe2 = &BCEEPwQwBDw- plugin/expire = &BBoEPgRABDcEOAQ9BDA- 7 &BCEEPwQwBDw- 30 plugin/login_executable = /usr/libexec/dovecot/managesieve-login plugin/mail_executable = /usr/libexec/dovecot/managesieve plugin/quota = maildir:User quota plugin/quota_rule = *:storage=1GB plugin/quota_warning = storage=95%% /usr/libexec/dovecot/quota-warning.sh 95 %u %d plugin/quota_warning2 = storage=90%% /usr/libexec/dovecot/quota-warning.sh 90 %u %d plugin/quota_warning3 = storage=80%% /usr/libexec/dovecot/quota-warning.sh 80 %u %d plugin/sieve_dir = /var/vmail/%d/%1n/%n/.dovecot.sieve plugin/sieve_extensions = +imapflags plugin/sieve_storage = /var/vmail/%d/%1n/%n/sieve protocols = pop3 imap lmtp sieve service auth { unix_listener /var/spool/postfix/private/auth { group = postfix mode = 0660 user = postfix } } service imap-login { executable = /usr/libexec/dovecot/imap-login inet_listener imap { port = 143 } inet_listener imaps { port = 993 ssl = yes } service_count = 1 } service imap { executable = /usr/libexec/dovecot/imap } service lmtp { unix_listener /var/spool/postfix/private/dovecot-lmtp { group = postfix mode = 0666 user = postfix } } service managesieve-login { executable = /usr/libexec/dovecot/managesieve-login inet_listener sieve { port = 4190 } service_count = 1 } service managesieve { executable = /usr/libexec/dovecot/managesieve } service pop3-login { executable = /usr/libexec/dovecot/pop3-login inet_listener pop3 { port = 110 } inet_listener pop3s { port = 995 ssl = yes } service_count = 1 } service pop3 { executable = /usr/libexec/dovecot/pop3 } service quota-warning { executable = script /usr/libexec/dovecot/quota-warning.sh user = dovecot } ssl_cert = </etc/pki/dovecot/certs/dovecot.pem ssl_key = </etc/pki/dovecot/private/dovecot.pem userdb { args = uid=postfix gid=postfix driver = static } protocol imap { imap_client_workarounds = delay-newmail tb-extra-mailbox-sep mail_plugin_dir = /usr/lib64/dovecot mail_plugins = autocreate expire quota imap_quota trash } protocol pop3 { pop3_client_workarounds = outlook-no-nuls oe-ns-eoh pop3_lock_session = yes pop3_uidl_format = %08Xu%08Xv } protocol lmtp { info_log_path = /var/log/dovecot-lmtp-info.log log_path = /var/log/dovecot-lmtp.log mail_plugins = quota sieve } Here is my typical LDAP user: dn: uid=joe,pdomain=domain.com,ou=mail,dc=org,dc=ru objectClass: top objectClass: uidObject objectClass: mailAccount accountStatus: TRUE mail: joe(a)domain.com mailQuota: 1073741824 mailMessageStore: /var/vmail/domain.com/j/joe/Maildir mailOwnerFirstName: Joe mailOwnerLastName: User registerPersonFirstName: Joe registerPersonLastName: User registerDate: 1301665769 homeDirectory: /var/vmail/domain.com/j/joe uid: joe userPassword: {SSHA}FvxQwgDycssHhfoMTtkzogZ0Nh43PpHL

1 1

Re: [Dovecot] IO rate quotas?
by Alan Brown 12 Apr '11

12 Apr '11

From: Timo Sirainen <tss(a)iki.fi> Subject: Re: [Dovecot] IO rate quotas? > So a single process that is reading files fast enough from disk can > cause disk IO to spike in a way that makes all other processes wait for > available disk IO? It's not a single process. Thunderbird's newest defaults are to syncronize every folder and it will open one connectrion per folder in order to do that. Appropriate disk/swappiness/readahead/cache tuning is required - along with enough ram to cope with several users trying this at once. The underlaying filesystem is also important. as a for-instance, this kind of load with maildir format will effectively _kill_ a GFS box. Our fix was to install systemwide defaults on managed systems to not synchronize (not needed, the home directories are on network storage anyway) and to ask people to check/unset this on laptops/etc

5 4

[Dovecot] hardlinks deliver not work
by Arnaud Yonnet 11 Apr '11

11 Apr '11

hello, I try to use the deliver dovecot with hardlinks. in command line, it's work with this command /usr/lib/dovecot/deliver -p themail -d user when i send mail with postfix. I received the mail for all users but it doesn't create hardlinks. i check with command line md5sum themail it same for all mail . but it don't create hardlinks. in my master.cf dovecot unix - n n - - pipe user=utilisateurmail:utilisateurmail argv=/usr/lib/dovecot/deliver -d ${user} have you got a solution ? thinks you Arnaud Yonnet ps, im sorry. my English is really poor....

3 4

[Dovecot] Over quota and send Mails
by Jim Knuth 11 Apr '11

11 Apr '11

Hello, if a user over quota is, he can do no mails more receive. So far, so good. But why he can do, nevertheless, mails do send? Has that to do something with dict option? -- Mit freundlichen Grüßen, Jim Knuth P.S.: Bitte HTML-Mails! Zufallszitat: Richtig verheiratet ist erst der Mann, der jedes Wort versteht, das seine Frau nicht gesagt hat. (Alfred Hitchcock)

3 4

[Dovecot] domain variable still empty
by Andre Rodier 11 Apr '11

11 Apr '11

Hello all, First, thanks for your help with my previous NFS problem. I am trying to mount a mail server, with debian and dovecot 1.2. Until now, I have both shared and public folders working, on a NFS share. indexes are stored locally, as well as per user flags. Sive is also working :-) Now, I'd like to restrict sharing by domain, and for this, to use the "%d" variable When I authenticate, for instance using arodier@red2team, the authentication works. However, the "%d" variable is still empty, when I'd like it to contains "red2team" Here my config: -------------------------------------------------------------- # 1.2.15: /etc/dovecot/dovecot.conf # OS: Linux 2.6.32-5-amd64 x86_64 Debian 6.0.1 nfs4 log_timestamp: %Y-%m-%d %H:%M:%S protocols: imap imaps managesieve ssl: required disable_plaintext_auth: no login_dir: /var/run/dovecot/login login_executable(default): /usr/lib/dovecot/imap-login login_executable(imap): /usr/lib/dovecot/imap-login login_executable(managesieve): /usr/lib/dovecot/managesieve-login login_greeting: Titan Ready mail_access_groups: mails mail_privileged_group: mails mail_uid: vmails mail_gid: mails mail_location: maildir:/home/emails/%d/%n/Maildir:INDEX=/var/mail/indexes/%n:CONTROL=/var/mail/indexes/%n mail_debug: yes mmap_disable: yes fsync_disable: yes mail_nfs_storage: yes lock_method: flock mbox_write_locks: fcntl dotlock mail_executable(default): /usr/lib/dovecot/imap mail_executable(imap): /usr/lib/dovecot/imap mail_executable(managesieve): /usr/lib/dovecot/managesieve mail_plugins(default): quota imap_quota acl imap_acl fts fts_squat mail_plugins(imap): quota imap_quota acl imap_acl fts fts_squat mail_plugins(managesieve): mail_plugin_dir(default): /usr/lib/dovecot/modules/imap mail_plugin_dir(imap): /usr/lib/dovecot/modules/imap mail_plugin_dir(managesieve): /usr/lib/dovecot/modules/managesieve namespace: type: private separator: / location: maildir:/home/emails/%d/%n/Maildir:INDEX=/var/mail/indexes/private/%n:CONTROL=/var/mail/indexes/private/%n inbox: yes list: yes subscriptions: yes namespace: type: shared separator: / prefix: Shared/%%u/ location: maildir:/home/emails/%d/%%n/Maildir:INDEX=/var/mail/indexes/users/%n/%%n:CONTROL=/var/mail/indexes/users/%n/%%n list: children namespace: type: public separator: / prefix: Team/ location: maildir:/home/emails/%d/Public/Maildir/:INDEX=/var/mail/indexes/public/%n list: yes lda: postmaster_address: postmaster(a)red2group.com hostname: smtp1.red2group.com mail_plugins: quota acl sieve auth_socket_path: /var/run/dovecot/auth-master auth default: mechanisms: plain login default_realm: red2team username_format: %u verbose: yes debug: yes passdb: driver: ldap args: /etc/dovecot/dovecot-ldap.conf userdb: driver: ldap args: /etc/dovecot/dovecot-ldap.conf socket: type: listen client: path: /var/spool/postfix/private/auth mode: 432 user: postfix group: postfix master: path: /var/run/dovecot/auth-master mode: 438 plugin: quota: maildir acl: vfile:/etc/dovecot/acls/:cache_secs=300 acl: vfile acl_shared_dict: proxy::acl sieve: /home/emails/%d/%n/Filters/Active.sieve sieve_dir: /home/emails/%d/%n/Filters fts: squat dict: quota: ldap:/etc/dovecot/dovecot-ldap.conf acl: mysql:/etc/dovecot/dovecot-mysql.conf -------------------------------------------------------------- This is now the content of the dovecot-ldap config -------------------------------------------------------------- auth_bind = yes base = dc=red2,dc=srv default_pass_scheme = PLAIN-MD5 hosts = callisto.red2.srv thebe.red2.srv ldap_version = 3 pass_filter = (&(objectClass=posixAccount)(uid=%n)) scope = subtree user_attrs = homeDirectory=home,gosaMailQuota=quota_rule=*:storage=%$M, mail_plugins user_filter = (&(objectClass=posixAccount)(uid=%n)) -------------------------------------------------------------- What surprise me is this line during the authentication: ===> auth(arodier(a)red2team,10.10.2.19): username changed arodier@red2team -> arodier Any idea, please ? I am stuck on that since two days ! Kind regards, André.

2 4

[Dovecot] INBOX empty after dsync
by Gary Chodos 11 Apr '11

11 Apr '11

After hearing so many good things about mdbox, I am testing it. I moved my Maildir to a test box, and did the conversion with dsync which reported no errors and appeared to go fine after I set: namespace { separator = / inbox = yes } and changed mail_location=mdbox:~/mdbox But the problem is that the Inbox now is empty in my imap client. What did I do wrong? I can see the emails are there if I grep for subject lines I know exist in my inbox within ~/mdbox, but in the imap client it is as if inbox is totally empty. All the other folders appear fine in imap client.

1 1

[Dovecot] Memory access mistake
by Jim Knuth 10 Apr '11

10 Apr '11

Hi, I have the following report after a cron job? Unfortunately, I do not know the English word. Memory access mistake/error? /tools/expunge: 2980 Speicherzugriffsfehler doveadm expunge -A mailbox Spam savedbefore 8d What can this lie with? What must I show in addition? dovecot-n or what? Thank you. # 2.0.11 (a0c1c6f7cf6e): /etc/dovecot/dovecot.conf # OS: Linux 2.6.29.4 i686 Debian wheezy/sid -- Mit freundlichen Grüßen, Jim Knuth P.S.: Bitte HTML-Mails! Zufallszitat: Die Menschheit ist zu weit vorwärts gegangen, um sich zurückzuwenden, und bewegt sich zu rasch, um anzuhalten. [Churchill]

4 8

[Dovecot] Dovecot 2.0 config bug with SSL certificate per protocol?
by Andy Smith 09 Apr '11

09 Apr '11

Hi, yesterday I upgraded Dovecot from 1.2 to 2.0.11. I'd seen that there was a config file converter to make the upgrade smooth so was expecting it to be pretty quick and easy. In the end I spent a long time trying to get it working as it just wouldn't listen on the ssl ports, imaps and pop3s. I am using per portocol SSL certificates, as I was in version 1.2. The part of my config is as follows (as generated by doveconf): protocol imap { imap_client_workarounds = delay-newmail tb-extra-mailbox-sep mail_plugins = fts fts_squat ssl = yes ssl_cert = </usr/local/etc/ssl.crt/imap.crt ssl_key = </usr/local/etc/ssl.key/imap.key } protocol pop3 { pop3_client_workarounds = outlook-no-nuls oe-ns-eoh pop3_uidl_format = %08Xu%08Xv ssl = yes ssl_cert = </usr/local/etc/ssl.crt/pop3.crt ssl_key = </usr/local/etc/ssl.key/pop3.key } But when I started dovecot it was only listening on the non SSL ports for IMAP and POP3. I went through many things, adding in a service imap-login section with the SSL port set via inet_listener and spent ages googling for how to get it to work. In the end it turns out it was that the global ssl setting was set to "no", but I hadn't enabled this previously as this requires that there are global SSL certificates, which I don't have; I have specific certs for IMAP and for POP3. Also this isn't how dovecot 1.2 worked, there I specificed the protocols (pop3, pop3s, imap, imaps) and specificed the protocol certs and it worked. Anyway, I ended up just specifiing my pop3 certs as the global certs, this is then redefined in the pop3 protcol section etc. The config seems to work, but to me all this doesn't seem logical and doesn't work like in dovecot 1.2. Maybe this is something that can be cleaned up in the next version? thanks Andy.

3 5

[Dovecot] transferring imap folders
by Voytek Eymont 09 Apr '11

09 Apr '11

I have some old mail on courier-imap that I'd like to bring over some of the readme says I need to make Dovecot's inbox as "INBOX" not "Inbox" for courier-imap compatibility.. that seems to be already default, no ? also, my INBOX is mainly like 'sent/year/month' and some other 'work/this' subfolders is there a tool I need to use, or should just copy over dir tree from old server and suck'n'see ? dovecot --version 1.2.9 -- Voytek

2 1

[Dovecot] IO rate quotas?
by Kádár Tamás (KTamas) 09 Apr '11

09 Apr '11

Hi Okay so we've been having this issue since forever and I figured why the heck not ask it here since it's mostly related to dovecot. The thing is, we have a huge amount of public folders (at the moment, around 1100). Now, with dovecot indexing and caching we're mostly okay, also being careful with things like Thunderbird 3's default 'Download everything' option ("Keep messages for this account on this computer") and such. However once in a while, someone goes rogue, we install a new version of thunderbird, someone accidentally sets up an email account in thunderbird mistakingly leaving the download everything option on. This causes high IO on our server, and a single user can quickly more or less kill the whole server in mere minutes, load average quickly spiking to 30-40-50 and everything becomes sloooooow (obviously). Is there any way I can limit the amount of IO a certain user can use? Thanks and best regards, KT P.S. my dovecot -n is: # 2.0.9: /usr/local/etc/dovecot/dovecot.conf # OS: Linux 2.6.26-2-xen-amd64 x86_64 Debian 5.0.8 auth_mechanisms = plain login disable_plaintext_auth = no listen = * mail_location = maildir:~/Maildir mail_plugins = acl maildir_very_dirty_syncs = yes namespace { inbox = yes location = prefix = separator = . type = private } namespace { location = maildir:/home/_shared/projects:INDEX=~/Maildir/_shared prefix = shared. separator = . subscriptions = no type = public } namespace { location = maildir:/home/_shared/sys:INDEX=~/Maildir/sys prefix = sys. separator = . subscriptions = no type = public } passdb { driver = pam } plugin { acl = vfile mail_log_events = delete undelete expunge copy mailbox_delete mailbox_rename flag_change append mail_log_fields = uid box msgid from subject size vsize flags mail_log_group_events = no } protocols = imap pop3 service imap { executable = imap } ssl_cert = </etc/ssl/certs/dovecot.pem ssl_key = </etc/ssl/private/dovecot.pem userdb { driver = passwd } verbose_proctitle = yes protocol imap { mail_max_userip_connections = 40 mail_plugins = acl imap_acl }

7 12

[Dovecot] coredump in dovecot 2.0.11
by k b 09 Apr '11

09 Apr '11

Hi. I use dovecot-2.0.11-1.fc14.i686 on linux,redhat fedora 14. Using alpine 2.02 and Kmail 1.13.5 i have one IMAP connection to the dovecot server and one IMAP connection to a MS exchange server. After i moved a few messages from the exchange server i cannot open the folders where i placed the moved mails. instead dovecot crashes, all other directories and emails work fine. here is what i see in /var/log/messages: Apr 9 08:23:10 server00 abrt[28509]: saved core dump of pid 28508 (/usr/libexec/dovecot/imap) to /var/spool/abrt/ccpp-1302330190-28508.new/coredump (626688 bytes) Apr 9 08:23:10 server00 abrtd: Directory 'ccpp-1302330190-28508' creation detected Apr 9 08:23:10 server00 abrtd: Crash is in database already (dup of /var/spool/abrt/ccpp-1302111878-7921) Apr 9 08:23:10 server00 abrtd: Deleting crash ccpp-1302330190-28508 (dup of ccpp-1302111878-7921), sending dbus signal I can post the coredump but i will have to clean it first as i can see it contains a few emails. would it help to post the coredump or shuould i skip that?

2 1

[Dovecot] mysql lookup on another host performance q?
by Voytek Eymont 09 Apr '11

09 Apr '11

Hi, new to dovecot I'm setting a small postfix/dovecot server for virtual domain/users in mysql dovecot is on one host, mysql on another seems to be working, but I'm concerned over performance overhead of this setup; dumb Q, is there any 'proxy mysql' or cacheing option I can use ? any suggestions appreciated also, my mail users as set as 5000/5000 virtual_gid_maps = static:5000 virtual_uid_maps = static:5000 so, I should use uid/gid 5000/5000 in query below, yes ? thanks -- Voytek --------------------------------------------------------- # dovecot --version 1.2.9 Linux 2.6.32-21-generic-pae #32-Ubuntu SMP Fri Apr 16 09:39:35 UTC 2010 i686 GNU/Linux # grep -v '^ *$#.*$\?$' dovecot-sql.conf driver = mysql connect = host=host.tld dbname=ddd user=ccc password=xxx user_query = SELECT concat('/var/mail/vhosts/', maildir) as home, concat('maildir:/var/mail/vhosts/', maildir) as mail, 5000 AS uid, 5000 AS gid, concat('maildir:storage=', quota) AS quota FROM mailbox WHERE username = '%u' AND active = '1' default_pass_scheme = MD5 user_query = SELECT '/var/mail/vhosts/%d/%n@%d' as home, 'maildir:/var/mail/vhosts/%d/%n@%d' as mail, 5000 AS uid, 5000 AS gid, concat('dirsize:storage=', quota) AS quota FROM mailbox WHERE username = '%u' AND active = '1' password_query = SELECT username as user, password, '/var/mail/vhosts/%d/%n@%d' as userdb_home, 'maildir:/var/mail/vhosts/%d/%n@%d' as userdb_mail, 5000 as userdb_uid, 5000 as userdb_gid FROM mailbox WHERE username = '%u' AND active = '1'

3 3

[Dovecot] 143 STARTTLS/ 993 SSL/TLS query
by Voytek Eymont 09 Apr '11

09 Apr '11

I'm testing my new dovecot server with Thundirbird I can have it working on port 143 with STARTTLS, or on port 993 with SSL/TLS my uderstanding is that on 993 I get encrypted 'password and mail transfer' (yes ?) so what happens if I use 143 with STARTTLS, is that equivalent to port 993 if STARTTLS is used ? thanks for any insights.. -- Voytek

2 3