- dovecot - dovecot.org

Re: [Dovecot] Dovecot on Solaris
by Joseph Tam 21 Nov '06

21 Nov '06

> For those running Dovecot on Solaris, what are your positive/negative > experiences with building the software with CC vs. GCC? We are currently > letting ./configure find our gcc and build with it, but wondered if anyone > has any experience with Sun CC (does it even compile, for example). I once used StudioCC to compile dovecot to see if the problem I had was a compiler bug, but in general, I use gcc since a lot of software is tested against it. I don't use Studio unless performance is critical. >From what I know, IMAP performance is basically disk-memory bounded, so it might not be worth sweating over: use whatever gives you the least grief. Joseph Tam <tam(a)math.ubc.ca>

1 0

[Dovecot] manageSIEVE implementation
by Brian G. Peterson 20 Nov '06

20 Nov '06

I found a thread from last year that suggested that a manageSIEVE (port 2000) implementation for dovecot-sieve doesn't exist yet. I assume that this is still true. Could somebody please provide a status on this? Thanks, - Brian

3 3

Re: [Dovecot] Auth checking also the service
by Andrey Panin 20 Nov '06

20 Nov '06

On 322, 11 18, 2006 at 12:56:41 +0100, Alessandro Astarita wrote: > Alle 12:14, sabato 18 novembre 2006, Johannes Berg ha scritto: > > I don't see why it wouldn't be possible but haven't looked at the code. > > > > I wonder why you even need to distinguish between these though. Are we > > still in the days where encryption is a value-added service? :) > > I have to distinguish pop3/pop3s and imap/imaps because I need mailboxes with > ssl access only. It's a way to force users to do secure connection. :-) Please try attached patch. It adds %c variable which expands to "TLS" if connection is secure. > -- > Alessandro 'Asterix' Astarita <aleast(a)capri.it> > Capri Online S.r.l. http://www.caprionline.it/ > "Unix IS user friendly. It's just selective about who its friend are" > -- Andrey Panin | Linux and UNIX system administrator pazke(a)donpac.ru | PGP key: wwwkeys.pgp.net

3 2

[Dovecot] BUG: passdb checkpassword {} and lastauth file
by Max A 20 Nov '06

20 Nov '06

(Repeat, because on the first message there was no reaction) Hi. If checkpassword interface is used for working with vpopmail, function vpopmail "Record time and ip of last auth attempt" (--enable-auth-logging option for configure) won't work - the file "lastauth" is created in Maildir, but does not contain ip-address. If I had correctly understood, dovecot woldn't have set a enviroment variable TCPREMOTEIP for vchkpw. If changes are made in auth/passdb-checkpassword.c (a patch in attachment), everything will work. Probably, the patch is incorrect and does not solve all problems, however the request is to pay attention to existence of the problem. Also it is possible, that a similar problem exists with other variables TCP UCSPI protocol (http://cr.yp.to/proto/ucspi-tcp.txt) P.S. If use the interface vpopmail instead of checkpassword, the file "lastauth" will not be created at all, that is a little bit inconvenient. ********************************** System: dovecot-1.0.rc10 vpopmail-5.4.17 ASP Linux Server II (RHEL3 clone) kernel 2.4.21-47.EL.aspsmp CPU architecture: x86 (IBM xSeries 336) Filesystem: ext3 ********************************** dovecot configuration: base_dir = /var/run/dovecot/ protocols = imap pop3 disable_plaintext_auth = no ssl_disable = yes login_greeting = Ready. first_valid_uid = 89 last_valid_uid = 89 first_valid_gid = 89 last_valid_gid = 89 protocol imap { listen = 81.26.136.8:144 mail_executable = /usr/local/libexec/dovecot/imap mail_plugins = quota imap_quota mail_plugin_dir = /usr/local/lib/dovecot/imap imap_client_workarounds = delay-newmail outlook-idle netscape-eoh tb-extra-mailbox-sep } protocol pop3 { listen = 81.26.136.8:112 login_executable = /usr/local/libexec/dovecot/pop3-login mail_executable = /usr/local/libexec/dovecot/pop3 pop3_uidl_format = %f mail_plugins = quota mail_plugin_dir = /usr/local/lib/dovecot/pop3 pop3_client_workarounds = outlook-no-nuls oe-ns-eoh } auth default { mechanisms = plain login passdb checkpassword { args = /var/qmail/vpopmail/bin/vchkpw } userdb prefetch { } user = root } dict { } plugin { quota = maildir } *************************************** dovecot configure options: ./configure \ --disable-ipv6 \ --prefix=/usr/local \ --sysconfdir=/etc/dovecot \ --without-passwd \ --without-passwd-file \ --without-shadow \ --without-pam \ --without-bsdauth \ --with-checkpassword \ --with-vpopmail \ --without-static-userdb \ --with-prefetch-userdb \ --without-sql \ --without-pgsql \ --without-mysql \ --without-sqlite \ --with-ssl=openssl \ --with-pop3d \ --without-deliver \ --with-storages=maildir \ --with-docs ***************************************** vpopmail configure options: ./configure \ --enable-auth-module=cdb \ --enable-logging=p \ --enable-md5-passwords \ --enable-make-seekable \ --enable-file-sync \ --enable-ip-alias-domains \ --enable-clear-passwd \ --disable-roaming-users \ --disable-learn-passwords \ --disable-passwd \ --enable-auth-logging diff -ur dovecot-1.0.rc10.orig/src/auth/passdb-checkpassword.c dovecot-1.0.rc10/src/auth/passdb-checkpassword.c --- dovecot-1.0.rc10.orig/src/auth/passdb-checkpassword.c 2006-08-22 06:37:56.000000000 +0400 +++ dovecot-1.0.rc10/src/auth/passdb-checkpassword.c 2006-10-17 16:47:09.000000000 +0400 @@ -226,6 +226,10 @@ env_put(t_strconcat("REMOTE_IP=", net_ip2addr(&request->remote_ip), NULL)); + env_put(t_strconcat("TCPREMOTEIP=", + net_ip2addr(&request->remote_ip), + NULL)); + } if (request->master_user != NULL) { env_put(t_strconcat("MASTER_USER=",

2 5

[Dovecot] dovecot and ldap passwords.
by Mauro Sanna 20 Nov '06

20 Nov '06

Hallo. First of all I'm sorry for my bad english. I have a question about how dovecot use passwords. I have all my mail accounts in a ldap database. The user password are stored in form: {crypt}mypasswd. In dovecot-ldap.conf I have default_pass_scheme = CRYPT. All is working fine. The problem in the crypt scheme is that I can't have passwords more than 8 characters long. So I've tried to change the type of the ldap passwords in SSHA or SMD5, but in this way the users can't authenticate yourselfs. Dovecot doesn't understand SSHA or SMD5?

3 3

[Dovecot] Problem with rc10
by Steven F Siirila 20 Nov '06

20 Nov '06

I just upgraded our test server from rc6 to rc10... ISSUE #1 I noticed that we no longer are getting two "From_" lines. However, the one that was good (had the original sender e-mail address) is now gone. The one with "dovecot.deliver" remains. I attempted to add "-d test" to the mailbox_command line in main.cf as follows: mailbox_command = /opt/dovecot/libexec/dovecot/deliver -d test and things turned ugly and caused Postfix to defer messages: Oct 17 16:31:50 hostname postfix/local[7230]: D14632C9C: to=<someuser@somehost>, relay=local, delay=3.6, delays=3/0.02/0/0.62, dsn=4.3.0, status=deferred (temporary failure) I removed the "-d test" from the Postfix main.cf and the problem went away. So, how do I fix the "From_" lines? ISSUE #2 After upgrading, messages cannot be moved from the INBOX to a folder. Thunderbird claims there was an internal error and to consule the server logs, but I see nothing in the dovecot logs that would indicate what's going on. For example, I attempted to move a message into my Trash folder which did not currently have any index files. Here is a Solaris truss output of that attempt: poll(0x000B4C98, 2, 999) = 0 poll(0x000B4C98, 2, 0) = 0 poll(0x000B4C98, 2, 999) = 1 read(0, " D O N E\r\n", 3323) = 6 write(1, " 2 8 O K I d l e c".., 23) = 23 read(0, 0x000BC5BB, 3317) Err#11 EAGAIN poll(0x000B4C98, 2, 675) = 1 read(0, " 3 0 u i d c o p y ".., 3317) = 27 stat64("/home/sfs/Trash", 0xFFBFF5C8) = 0 alarm(120) = 0 fcntl(6, F_SETLKW64, 0xFFBFF308) = 0 alarm(0) = 120 stat64("/home/sfs/Trash", 0xFFBFF640) = 0 mkdir("/home/sfs/.imap/Trash", 0770) Err#17 EEXIST stat64("/home/sfs/.imap/Trash", 0xFFBFF4C0) = 0 stat64("/home/sfs/Trash", 0xFFBFF4C0) = 0 time() = 1161122396 open64("/home/sfs/.imap/Trash/dovecot.index", O_RDWR) Err#2 ENOENT open64("/home/sfs/.imap/Trash/dovecot.index", O_RDWR) Err#2 ENOENT write(1, " 3 0 N O I n t e r n".., 96) = 96 poll(0x000B4C98, 2, 588) = 0 poll(0x000B4C98, 2, 0) = 0 poll(0x000B4C98, 2, 410) = 0 Someone else using a different IMAP client caused these errors to occur (this is even after I wiped all of their dovecot index files): Oct 17 16:43:11 earth.tc.umn.edu dovecot: IMAP(kor): Corrupted transaction log file /home/kor/.imap/INBOX/dovecot.index.log: invalid indexid (1161121145 != 1156185395) Oct 17 16:43:11 earth.tc.umn.edu dovecot: IMAP(kor): Corrupted transaction log file /home/kor/.imap/INBOX/dovecot.index.log: invalid new transaction log sequence (6 >= 6) Oct 17 16:47:09 earth.tc.umn.edu dovecot: IMAP(kor): Corrupted transaction log file /home/kor/.imap/INBOX/dovecot.index.log: invalid indexid (1161121145 != 1161120959) Oct 17 16:47:09 earth.tc.umn.edu dovecot: IMAP(kor): Corrupted transaction log file /home/kor/.imap/INBOX/dovecot.index.log: invalid new transaction log sequence (2 >= 2) Oct 17 17:05:59 earth.tc.umn.edu dovecot: IMAP(kor): Corrupted transaction log file /home/kor/.imap/INBOX/dovecot.index.log: invalid indexid (1161121145 != 1161120959) Oct 17 17:05:59 earth.tc.umn.edu dovecot: IMAP(kor): Corrupted transaction log file /home/kor/.imap/INBOX/dovecot.index.log: invalid new transaction log sequence (4 >= 4) Here are our non-standard dovecot.conf items: protocols = imap imaps pop3 pop3s shutdown_clients = no syslog_facility = local6 ssl_cert_file = /etc/opt/openssl/certs/dovecot.pem ssl_key_file = /etc/opt/openssl/private/dovecot.pem default_mail_env = mbox:~/:INBOX=/var/mail/%u # Default namespace namespace private { separator = / prefix = location = mbox:~/:INBOX=/var/mail/%u inbox = yes hidden = yes } mail_full_filesystem_access = yes first_valid_uid = 100 max_mail_processes = 8192 mbox_min_index_size = 128 imap_client_workarounds = delay-newmail outlook-idle tb-extra-mailbox-sep pop3_uidl_format = %08Xu%08Xv protocol lda { postmaster_address = postmaster(a)umn.edu mail_plugins = cmusieve } auth_verbose = yes auth_debug = yes auth default { passdb pam { args = session=yes * } } I am now backing out to rc6 for now... we never saw this behavior on rc6. -- Steven F. Siirila Office: Lind Hall, Room 130B Internet Services E-mail: sfs(a)umn.edu Office of Information Technology Voice: (612) 626-0244 University of Minnesota Fax: (612) 626-7593

2 4

[Dovecot] Problems Creating Core Dumps
by Joseph D. Wagner 20 Nov '06

20 Nov '06

Dovecot 1.0.rc15 crashed on my FC4 server, but it didn't create a core dump. Upon further research, I found these lines tucked away in the /etc/rc.d/init.d/functions file: # make sure it doesn't core dump anywhere unless requested ulimit -S -c ${DAEMON_COREFILE_LIMIT:-0} >/dev/null 2>&1 The /etc/rc.d/init.d/functions file is a master file that is referenced by all of the init scripts, so I didn't want to change it. Instead, I created a file /etc/sysconfig/dovecot with the following line: DAEMON_COREFILE_LIMIT=unlimited If I'm reading the /etc/rc.d/init.d/functions file correctly, this should work, but my bash is rusty. I was hoping someone else could check my work. Joseph D. Wagner

2 1

[Dovecot] Backtraces without core dumps
by Timo Sirainen 19 Nov '06

19 Nov '06

Since getting core dumps seems to be difficult sometimes, especially with login processes, I've now added code to log the backtrace when Dovecot crashes in some assert check (or some other reason why it decides to abort()). This code works with Linux and Solaris, but I don't know about BSDs. Apparently there exists libexecinfo library which could be used. I think this code could be used to log backtraces also for segfaults, but that's more risky so I didn't do it yet. Maybe it should be done only optionally. If you're interested in trying, the code is now in CVS and in the latest nightly snapshot. When it crashes, it prints something like: Panic: file client.c: line 55 (client_create): assertion failed: (my_client != NULL) Error: Backtrace: ./imap [0x80b2ffa] -> ./imap [0x80b2ecc] -> ./imap [0x805bbb3] -> ./imap(main+0x426) [0x80634a6] -> /lib/tls/libc.so.6 (__libc_start_main+0xc8) [0xb7e53ea8] -> ./imap [0x80566a1] Looks like the symbol name resolving doesn't work all that great. But here gdb will help you: gdb ./imap (gdb) b *0x80b2ffa Breakpoint 1 at 0x80b2ffa: file failures.c, line 126. (gdb) b *0x80b2ecc Breakpoint 2 at 0x80b2ecc: file failures.c, line 185. (gdb) b *0x805bbb3 Breakpoint 3 at 0x805bbb3 (gdb) b *0x80634a6 Breakpoint 4 at 0x80634a6: file main.c, line 223. That went pretty well, except for some reason it couldn't figure out where 0x805bbb3 was. To get some kind of an idea about that, you can do: (gdb) x 0x805bbb3 0x805bbb3 <client_create+467>: 0x90909090 If someone knows better ways to do all of this, please tell me too :)

1 0

[Dovecot] Dovecot (unofficial) patches
by Egbert Jan 19 Nov '06

19 Nov '06

Dear list, As a recent dovecot addict, I'm a bit puzzled by the sheer amount of patches available. I have not seen the history of these patches and I could not find a README explainng the patches. Are all these personal wishes/nice to have things or are they (to be) incorporated in dovecot-final? I use rpmbuild to create new rpms from the latest tarball but in that process still several patches are included during the build. I wonder if they are still needed in rc15. I use the orignal spec file (the latest I could find) was created for rc7 and in there I see: Patch2 dovecot-0.99.10-mbox-patch Seems to be to change the order of ./Mail before ./mail Patch3 dovecot-CVE-2006-2414 Overview from CVE db:Directory traversal vulnerability in Dovecot 1.0 beta and 1.0 allows remote attackers to list files and directories under the mbox parent directory and obtain mailbox names via ".." sequences in the (1) LIST or (2) DELETE IMAP command. I'm not a spec file wizard, so I change as less as possible. Unfortunately the maintainer (Jerome Soyer) has never responded to my emails. My server runs Mandriva Official 2007.0 and Postfix 2.3.3 and dovecot rc14 (will move to rc15 soon). TNX EgbertJan (NL)

2 1

[Dovecot] TLS timeout with Thunderbird
by Jason Dixon 19 Nov '06

19 Nov '06

I'm trying to get dovecot working with various clients on my new mailserver. I installed the base rc2 that comes with OpenBSD 4.0, then upgraded to rc14 when I ran into problems with TLS and Thunderbird. The server has no problems with Mail.app on my laptop, but any connection attempts from Thunderbird timeout after the TCP handshake. 13:53:41.074438 66.x.x.2.50483 > 38.x.x.248.993: S 3787736038:3787736038(0) win 65535 <mss 1460,nop,wscale 0,nop,nop,timestamp 2064284084 0,sackOK,eol> (DF) 13:53:41.074554 38.x.x.248.993 > 66.x.x.2.50483: S 1565942120:1565942120(0) ack 3787736039 win 16384 <mss 1460,nop,nop,sackOK,nop,wscale 0,nop,nop,timestamp 2681405076 2064284084> (DF) 13:53:41.459434 66.x.x.2.50483 > 38.x.x.248.993: . ack 1 win 65535 <nop,nop,timestamp 2064284084 2681405076> (DF) 13:53:47.028621 66.x.x.2.50483 > 38.x.x.248.993: F 1:1(0) ack 1 win 65535 <nop,nop,timestamp 2064284096 2681405076> (DF) The only thing logged by dovecot is a disconnection event. There is nothing else logged, even with ssl_verbose enabled. Nov 17 14:23:05 colo2 dovecot: imap-login: Disconnected: rip=66.x.x. 2, lip=38.x.x.248, TLS handshake This happens with Thunderbird 1.5.0.4 and 1.5.0.8 on Mac OS X, and Thunderbird 1.5.0.7 on Windows 2000. Any ideas would be greatly appreciated. Thanks, -- Jason Dixon DixonGroup Consulting http://www.dixongroup.net

7 11