- dovecot - dovecot.org

[Dovecot] Red Hat ES 4 - dovecot-auth: Unknown password scheme SMD5
by mel llaguno 01 Oct '05

01 Oct '05

I have a couple of questions regarding the default dovecot packaged with RedHat ES 4. The dovecot version is 0.99.11-2.EL4.1 which I assume is considerably behind the current stable version of 0.99.14. Is it the fact that I am using an older version of dovecot that SSHA passwords in an openldap directory are not recognized and give the following error: dovecot-auth: Unknown password scheme SMD5 ? LDAP is working as expected for NFS maildirs. I have dovecot 0.99.13 working on fedora core 3, but the stability of fedora leaves much to be desired and would like to get a stable, low maintenance install of dovecot on an enterprise supported linux. Redhat does not have packages for 0.99.14 and I would rather compile from source if possible. I've specified --with-ldap as part of the configure script, but am wondering if there is anything more to add to support SSHA passwords. Until dovecot 1.0 is proven in the field, it is not a consideration for the production environment this server is being used for. Any help with this matter would be greatly appreciated. TIA, Mel Llaguno

1 0

[Dovecot] Can't connect to auth server at default: Connection refused
by Chris Wakelin 30 Sep '05

30 Sep '05

We've being running with Dovecot 1.0-stable since Tuesday, and on the whole it's gone very well (meaning nobody's noticed!). My best estimate is we're using half the disk accesses and 2/3 the CPU of UW-IMAP/Qpopper. We've quite a mixture of error messages in the logs, the most worrying of which is that several times we've had a few seconds of "xxx-login: Can't connect to auth server at default: Connection refused" (where xxx is pop or imap). It seems to sort itself out shortly afterwards. We're using userdb=passwd, passdb=passwd (authenticating via NIS). From Tuesday we'll be using passdb=pam (pam_ldap to Active Directory). My first guess is that some dovecot-auth process stops responding and gets killed off. Is this right? Other errors we're seeing include 1) pread_full() failed with mbox file /export/mail/c/37/sau04djp/INBOX: No such file or directory (when there is!) 2) mbox sync: UID inserted in the middle of mailbox (especially with .prayer folders - configuration folders for our Webmail) 3) file mbox-lock.c: line 505 (mbox_lock): assertion failed: (lock_type == F_RDLCK || ibox->mbox_lock_type != F_RDLCK) presumably some of these are fixed in alpha2. Best Wishes, Chris -- --+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+- Christopher Wakelin, c.d.wakelin(a)reading.ac.uk IT Services Centre, The University of Reading, Tel: +44 (0)118 378 8439 Whiteknights, Reading, RG6 2AF, UK Fax: +44 (0)118 975 3094

2 4

[Dovecot] Problem running latest 1.0-alpha3
by dovecot＠spam.turbolink.net 30 Sep '05

30 Sep '05

I've tried upgrading from dovecot-1.0 stable to the latest dovecot-1.0.alpha3. I've done a configure with: ./configure --with-notify=none --with-ioloop=poll And all I get is this when I run: dovecot: Sep 29 16:45:28 Info: Dovecot v1.0.alpha3 starting up dovecot: Sep 29 16:45:29 Error: Auth process died too early - shutting down dovecot: Sep 29 16:45:29 Error: auth(default): Fatal: sigaction(SIGRTMIN) failed: Invalid argument dovecot: Sep 29 16:45:29 Error: child 4828 (auth) returned error 89 Linux kernel 2.4.24, FS in use are XFS and NFS Any clues? - Mike

1 1

[Dovecot] redirect and sieve BUG
by List Subscriptions [Obfusc8.Org] 30 Sep '05

30 Sep '05

I've only just subscribed to the list, but in reading through the back-issues have come across a bug with dovecot-lda that was reported previously, and I can reproduce. Using dovecot-lda CVS with Revision 1.21 of deliver.c (as newer versions won't compile against 1.0-alpha3), with dovecot 1.0-alpha3 and postfix 2.1.5 Rredirects mangle some headers - the 'To:' header ends up as: To: undisclosed-recipients: ; And there is no subject header. Running sendmail from the cmdline with: sendmail -i -f '<>' -- destination at address.com <msgtext> as suggested to test by *Timo Sirainen *results in a correctly formatted message. The mail_send_forward function in mail-send.c looks sane from what I can see, but then I'm not a C coder... Any clues guys? Cheers, Pete

1 0

[Dovecot] Maildir and counting inodes
by Andy Cravens 30 Sep '05

30 Sep '05

I've been testing with alpha 3 and I am about ready to go production. I am switching from mbox to maildir and I'd like to know if there is a formula or rule of thumb for determining if your file system will have enough inodes to handle all the mail message files. I could write a script to look at each user's mbox files, count the number messages and calculate the average number of emails per user, then add a fudge factor for expected growth. However, I doubt anybody actually goes to this much trouble to plan ahead. Or do they? I'm running Solaris 9 and when I created the file system I just used the defaults. If I need to change anything, I'd rather do it before going production. Thanks for any info you can provide on this subject.

3 2

[Dovecot] error and time out
by Roberto Cipollini 29 Sep '05

29 Sep '05

I can't download my email if the email has one attachment. It goes in time out. This is the log: (how to verbose more information in dovecot.log?) version: fedora core 4 and dovecot 0.99-14-4 Can anyone tell me if this can be the problem to not able to retrieve the email from dovecot? ==> /etc/dovecot.log <== dovecot-auth: Sep 28 17:37:03 Info: Login process 8 disconnected dovecot-auth: Sep 28 17:37:03 Info: Login process 8 connected dovecot-auth: Sep 28 17:37:03 Info: Login process 8 sent handshake: PID 22677 dovecot: Sep 28 17:37:29 Warning: Killed with signal 15 dovecot-auth: Sep 28 17:37:29 Info: Login process 8 disconnected dovecot-auth: Sep 28 17:37:29 Info: Login process 12 disconnected

2 1

[Dovecot] Permission denied: failed to chdir to /home/paul
by Paul Ororke 28 Sep '05

28 Sep '05

Hi, I've been trying to set up Exin and Dovecot and think I've almost gotten there. However I'm not recieving mail to my inbox and I get messages like the following in /var/log/exim/main.log: 2005-09-28 04:14:47 1EKZtf-0003gQ-26 <= users-return-105525-paul= paulororke.net(a)openoffice.org H=s002.sfo.collab.net<http://s002.sfo.collab.net>( openoffice.org <http://openoffice.org>) [64.125.133.202<http://64.125.133.202>] P=smtp S=3120 id=200509280613.08050.dlewis(a)delewis.com 2005-09-28 04:14:47 1EKZtf-0003gQ-26 == paul(a)paulororke.net R=localuser T=local_delivery defer (13): Permission denied: failed to chdir to /home/paul How do I make it so that this doesn't happen?

3 3

[Dovecot] ManageSIEVE services with Dovecot cvs-LDA?
by OpenMacNews 28 Sep '05

28 Sep '05

hi all, has anyone had any success in getting the current dovecot cvs-lda's implementation of CyrusSIEVE responding to a ManageSIEVE client? in particular, i'm hoping that one can use, e.g., Mulberry's Client- & Server-side sieve editor: <http://www.cyrusoft.com/sieve/sievescreens.html> if i telnet to my dovecot box's sieve port ( = 2000) i get no response at all ... telnet localhost 2000 Trying 127.0.0.1... telnet: connect to address 127.0.0.1: Connection refused telnet: Unable to connect to remote host net-stat shows nothing on port 2000, and, afaik, there's no mention of a server on the wiki ... so i'm either doing something wrong, or "it" is simply not there. has a sieve server been implemented? any plans? thx! richard

4 7

[Dovecot] Problem with logging in on pop3
by michal 28 Sep '05

28 Sep '05

I switched from dovecot 0.99 to 1.0 stable alpha and now i cannot get my pop3 to work. I checked the logs and this what i`m getting when i try to login using outlook: Login: user=<michael>, method=PLAIN, rip=192.168.1.200, lip=192.168.1.20 Sep 27 17:21:26 mail dovecot: pop3(michael): Effective uid=515, gid=100 Sep 27 17:21:26 mail dovecot: pop3(michael): maildir: access(/home/michael/Maildir, rwx): failed: No such file or directory Sep 27 17:21:26 mail dovecot: pop3(michael): maildir: couldn't find root dir Sep 27 17:21:26 mail dovecot: pop3(michael): mbox: root exists (/home/michael/mail) Sep 27 17:21:26 mail dovecot: pop3(michael): mbox: INBOX exists (/var/mail/michael) Sep 27 17:21:26 mail dovecot: pop3(michael): mbox: root=/home/michael/mail, index=/home/michael/mail, inbox=/var/mail/michael Sep 27 17:21:26 mail dovecot: pop3(michael): open(/var/mail/.temp.mail.bio-world.com.18859.4e2d002619befc19) failed: Permission denied Sep 27 17:21:26 mail dovecot: pop3(michael): file_lock_dotlock() failed with mbox file /var/mail/michael: Permission denied Sep 27 17:21:26 mail dovecot: pop3(michael): Mailbox init failed top=0/0, retr=0/ del=0/0, size=0 Anybody have any idea how to fix that pls ?

1 0

[Dovecot] Dovecot Error: Master requested auth for nonexisting client
by Paul E Virgo 27 Sep '05

27 Sep '05

Hello, The subject line says it all. It seems to be happening with regards to my default auth setting in the dovecot.conf file. I currently have it set to 'plain'. Am I missing something? FWIW, I am using the latest, stable (alpha) release: 1.0.alpha3 PE Virgo

3 2