- dovecot - dovecot.org

[dovecot] Re: Maildir format
by Timo Sirainen 30 Dec '02

30 Dec '02

On Mon, 2002-12-30 at 09:25, Gareth J. Greenaway wrote: > On Mon, Dec 30, 2002 at 08:51:21AM +0200, Timo Sirainen wrote: > > Dovecot wants the folders directory names to begin with a dot, so name > > it ".test". Subfolders would be named as ".test.subfolder". This is > > compatible with Courier's Maildir++ format. > > Right. that is what I have as im using the Maildir folders from > Courier but I still do not see mail showing up in them. The folder > itself shows up but no mail. Oh, I think then you're just using mutt a bit wrong :) Enter-key goes inside a subfolder, space-key selects the folder. A folder can itself contain mail but it can also contain subfolders, so this is needed. With Courier you probably got away with just enter-key because you didn't have such subfolders and Courier gives mutt hints about if folders have subfolders. Dovecot doesn't yet support that extension so mutt always assumes they have subfolders.

1 0

[dovecot] Maildir format
by gareth＠wiked.org 30 Dec '02

30 Dec '02

Started using dovecot and I am very impressed by its speed. I am confused by what it is expecting the format of the Maildir directory to be in. I currently have ~/Maildir which contains new, cur, and tmp all containing email that should be in my inbox and it pops up correctly as such when I connect to dovecot using Mutt. After the connection a new .INBOX is created under ~/Maildir with sym links back to new, cur, and tmp. The problem arrises when I want to view email from another folder, I have a folder called "test" which contains some email also in Maildir format, however when I attempt to view this email I only get an empty listing with the ".." to go one directory up. Thanks. Gareth Greenaway -- "My friends say I should act my age, What's my age again?" Gareth J. Greenaway | gareth(a)wiked.org

2 1

[dovecot] passwd-file; configure args..
by Jesse Peterson 28 Dec '02

28 Dec '02

I couldn't reproduce this again (because i can't get imap-master running due to problem below..) but.. When compiling without shadow, passwd, or pam, when logging in I get after a successful login (in my syslog): Dec 28 22:39:38 badcase imap(username): MAIL environment missing and autodetection failed (home /some/home/directory) Now I thought this was covered in a previous fix before (ChangeLog: "2002-12-17 03:00 Timo Sirainen <tss(a)iki.fi>") but for some reason it's broken again..? The configure args problem has to do with --localstatedir. If i leave it default (PREFIX/var) it forces me (even with non-relative pathnames in the config file) for the socket-files (ssl_parameters_file, login_dir) that should go in /var/run to be put under PREFIX, (/usr/local for NetBSD 1.6). Not too bad, if I could override it in the config file, which I can't. So I ./configure'd with --localstatedir=/, and when I run imap-master I now get: Fatal: Can't create directory //run/dovecot: No such file or directory Somewhat odd. Any clues on either of these would be helpful, thanks. -- Jesse Peterson erage(a)softhome.net

2 7

[dovecot] o.99rc2 works on PowerPC - sort of...
by Jonas Smedegaard 27 Dec '02

27 Dec '02

Hi all, The new release starts on PowerPC now. On to the next problem... :-) When accessing my folders through Pine (setup to always go through IMAP, even local mboxes) I get "kicked out" it seems, pretty often. Here's what shows in the logfile: imap(jonas): file imap-bodystructure.c: line 342 (part_write_body): assertion failed: (part->children->next == NULL) - Jonas -- Debian GNU/Linux developer http://www.debian.org/ Jonas Smedegaard +45 40843136 http://dr.jones.dk/ Consulting for machines and humans: Spiff ApS

2 1

[dovecot] RLIMIT_AS patch for FreeBSD
by Dominic Marks 27 Dec '02

27 Dec '02

Hey, I've just updated the FreeBSD dovecot port to the 0.99.4 beta release, the following patch was needed as FreeBSD has setrlimit(2) but does not define RLIMIT_AS (I believe). I switched the code the require both, alternatively find a parallel option in the FreeBSD setrlimit(2) manual page. ( http://www.freebsd.org/cgi/man.cgi?setrlimit ) You may be interested in integrating this patch. --- src/lib/restrict-process-size.c Fri Dec 27 18:19:41 2002 +++ src/lib/restrict-process-size.c-new Fri Dec 27 18:19:22 2002 @@ -32,7 +32,8 @@ void restrict_process_size(unsigned int size __attr_unused__) { -#ifdef HAVE_SETRLIMIT +#if defined(HAVE_SETRLIMIT) && defined(RLIMIT_AS) +/* FreeBSD has setrlimit(2) but does not define RLIMIT_AS */ struct rlimit rlim; rlim.rlim_max = rlim.rlim_cur = Thanks, -- Dominic <dom at cus.org.uk> <d.marks at student.umist.ac.uk>

2 1

[dovecot] Dovecot splited fetch problem
by Hon 27 Dec '02

27 Dec '02

Hello, When I was trying out the IMAP server (using Mozilla as client), I have no success of receving mail with attachments. Looking it down further I've found that Mozilla fetches the message in 10k blocks, and the server seems missed a couple of bytes at where the split occurs... Mozilla start the fetch by saying: * 413 FETCH (UID 827 RFC822.SIZE 106371 BODY[]<0> {10240} -- snip to place of split -- zmmAWdUxYA6Aobczv4BguxSZGqdYs6ELNIpgjiPUdYLxsHy) 7 OK Fetch completed. 8 UID fetch 827 (UID RFC822.SIZE BODY[]<10240.10240>) * 413 FETCH (UID 827 RFC822.SIZE 106371 BODY[]<10240> {10240} 6BilWYuUJGA4YeNYFJbI1gL The resulting line (saved from Mozilla view source) is: zmmAWdUxYA6Aobczv4BguxSZGqdYs6ELNIpgjiPUdYLxsHy6BilWYuUJGA4YeNYFJbI1gL ^^ Two bytes missing Where the original is: zmmAWdUxYA6Aobczv4BguxSZGqdYs6ELNIpgjiPUdYLxsHygZ6BilWYuUJGA4YeNYFJbI1gL ^^ I have tried this using Debian packaged (0.99.4-1) and self compiled 0.99.5rc1. Both exhibit this problem.

2 1

[dovecot] [Fwd: ./configure options..]
by Jesse Peterson 22 Dec '02

22 Dec '02

Oops, wrong address.. -------- Original Message -------- Message-ID: <3E0618CB.1060106(a)is.a.fakepope.com> Date: Sun, 22 Dec 2002 11:55:55 -0800 From: Jesse Peterson <erage(a)is.a.fakepope.com> User-Agent: Mozilla/5.0 (X11; U; FreeBSD i386; en-US; rv:1.1) Gecko/20020901 X-Accept-Language: en-us, en MIME-Version: 1.0 To: Dovecot Mail List <dovecot(a)procontrol.fi> Subject: ./configure options.. Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit [CVS from ~ 10:30am PST] It would seem that --without-passwd produces gcc -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -o imap-auth auth.o auth-plain.o auth-digest-md5.o cookie.o login-connection.o main.o master.o mycrypt.o userinfo.o userinfo-passwd.o userinfo-shadow.o userinfo-pam.o userinfo-passwd-file.o userinfo-vpopmail.o ../lib/liblib.a -lcrypt userinfo-passwd-file.o: In function `get_reply_data': dovecot/cvs/dovecot/src/auth/userinfo-passwd-file.c:72: undefined reference to `passwd_fill_cookie_reply' grep of the source tree says: src/auth/userinfo-passwd.c:16:void passwd_fill_cookie_reply(struct passwd *pw, AuthCookieReplyData *reply) Also pam, shadow, and passwd-file all seem to call this function in them. Ideas? -- Jesse Peterson erage(a)softhome.net

2 1

[dovecot] 0.99.5rc1
by Timo Sirainen 22 Dec '02

22 Dec '02

Current CVS contains a lot of code cleanups which aren't too well tested. Seems to be working with me, but I'm still a bit worried I left some very nasty bug lying around somewhere. There's anyway been many nasty fixes since 0.99.4, most importantly with mbox handling and SEARCH command. I've also added support for SORT extension. It's not very fast currently, but it should work. I tested with squirrelmail and it looked fine. So, those people wanting to use Dovecot with webmail might try it now. :) THREAD extension is still missing though. So, here's a 0.99.5 release candidate 1. I wouldn't recommend it for production usage yet, but I'd hope some people to test it before I'll put out a real release. Just so that I won't be (again) releasing n+3 versions in a few days :) You can get the sources from http://dovecot.procontrol.fi/rc/ I'm going away for christmas tomorrow, once I get back I'll do some more testing and auditing and get the final release out. Next weekend probably.

1 0

[dovecot] dovecot replacing uw-imap
by seth vidal 20 Dec '02

20 Dec '02

Hey, I'm trying to sort out how to make dovecot replace uw-imap cleanly. But I have the following problems/questions: 1. Why is mbox support limited to user-owned directories? 2. Would it be possible to have dovecot target a different place than ~user/mail by default, specfically some place like /var/path/to/maildirs/userdir/ I'd like to move all my mail storage out of user homedirs and to central space on my mail server, increasing reliability and helping me manage disk space usage for readily. In order to use dovecot I need a migration path and that path looks like it will need mbox outside of the users homedirs and pottentially outside of solely user-owned directories. -sv

3 4

[dovecot] 0.99.4 uploaded to Debian
by Jaldhar H. Vyas 18 Dec '02

18 Dec '02

Hi, I'm the Debian maintainer of UW-Imap. Like many I'm somewhat frustrated with the limitations of it so I am very pleased to see that Dovecot is becoming a strong alternative. I have uploaded packages of 0.99.4 to the Debian unstable distribution (sid). Because this is a new package it has to be added by hand so it may be a while before it shows up in sid. In the mean time, I have made the packages (also for stable or woody) available from http://www.braincells.com/open/ Debian users, please take a look and give me some feedback. Unfortunately much to my embarrasment I can't currently use dovecot on my own account. I get a meesage like this in /var/log/syslog: Dec 18 09:01:31 samadhi imap(jaldhar): Error indexing mbox file /home/jaldhar/mail/inbox: LF not found where expected The mbox in question is about 17MB and opens fine in uw-imapd. Any clues? -- Jaldhar H. Vyas <jaldhar(a)debian.org> It's a girl! See the pictures - http://www.braincells.com/shailaja/

2 1

[dovecot] passwd-file access
by Jesse Peterson 17 Dec '02

17 Dec '02

Using passwd-file authentication I run into some problems.. This is my passwd file: user:0cc175b9c0f1b6a831c399e269772661[34]:6660:6660:0:/some/mail/directory/user:0::: My MUA tells me after enter my user/pass that the server disconnected, OK. So I netcat into the imap server, and issue an "C: LOGIN user a" in which case I get the error "Fatal: USER environment missing". So I search for this in the src and find in 'src/imap/main.c' on line 30 it checks for the environment variable USER.. which I assume it can't find because it's not an actual system user, it's a ficticious user in a passwd-file. Any ideas? -- Jesse Peterson erage(a)softhome.net

2 1

[dovecot] Dovecot Pronunciation/Meaning
by Jesse Peterson 16 Dec '02

16 Dec '02

Timo, What is the "official" way to pronounce Dovecot? Is there a meaning to the word? A background on why you chose it? -- Jesse Peterson erage(a)softhome.net

2 1

[dovecot] SSL + default_mail_env
by Jesse Peterson 16 Dec '02

16 Dec '02

in the config file i have "ssl_disable = yes", however, i get this in my LOG_MAIL syslog: "Dec 17 00:21:07 host imap-master: Can't create temporary SSL parameters file /default/configured/directory/ssl-parameters.dat.tmp: No such file or directory" I know what the error is, and how to fix it, but it's an SSL thing which should have been disable according the config file, correct? It would seem that if you surround the value given to default_mail_env in quotes (as listed in the sample config file) you get errors like: Dec 17 00:21:13 host imap(testuser): Failed to create storage with data: "maildir:/home/testuser/mail/" -- Jesse Peterson erage(a)softhome.net

2 2

[dovecot] Maildir problem..
by Jesse Peterson 16 Dec '02

16 Dec '02

I have the most interesting problem... I've compiled dovecot from CVS with a checkout on 2002-12-15 around 23:00 PST. When I select a message in my MUA I can view it and stuff, however, if I select another message, or folder, the message disappears. It appears that dovecot shortens the Maildir message name to ":2,S" and then you can't access the message from the MUA again. The same happens if you try and move a message from a foler to another folder.. Any ideas? -- Jesse Peterson erage(a)softhome.net

2 2

[dovecot] Maildir detection..
by Jesse Peterson 12 Dec '02

12 Dec '02

It would seem that dovecot cannot detect my maildir. The system DO NOT use "~/Maildir". It is arbitrary across a few systems, actualy, and am curious if there is a way to "force" in the config file where the maildir explicitly resides, much like Postfix's "home_mailbox" configuration parameter. On a side note, I compiled dovecot 0.99.4 on a NetBSD 1.6-release i386 machine, it when imap_listen is not set in the config file, it only binds to the tcp6 ::1 address. Any clues? -- Jesse Peterson erage(a)softhome.net

2 1

[dovecot] Re: questions
by Timo Sirainen 06 Dec '02

06 Dec '02

On Fri, 2002-12-06 at 13:09, Farkas Levente wrote: > > I don't have much LDAP plans right now .. PAM would likely already have > > existing LDAP plugins, but you'd also have to keep the users in > > /etc/passwd then (without passwords). > why??? that's what I realy would like to avoid!!! is there any reason? PAM can only be used for checking if user/password matches, so it's missing the passwd information that Dovecot needs, at least home dir and uid. Although I had been thinking of making those some global settings in config file, so you could say homedir=/var/user/$USER$ uid=imapusers. > > I've been thinking about SQL database support from the beginning. > > However it'd probably be slower and require a bit more memory than with > > the current indexes. > > ohh? I assume a database should have to be faster, but this is just an > assumption... That's mostly because of a few tricks that Dovecot does with it's index files that aren't really possible with SQL databases. Multiuser mailboxes which are modified a lot are one thing where they could be faster than Dovecot's index files because of better locking. Besides, Dovecot's indexes could be called as a simple database..

1 0

[dovecot] questions
by Farkas Levente 05 Dec '02

05 Dec '02

hi, I'm look around to find a usable imap server and find dovecot. I read all the docs, but I've got a few questions: - currently we use courier (since we find and install it quickly). can we switch from it to dovecot smoothly? or we have to convert the maildirs somehow? - I've got a few plan in my mind it it possible to do it with dovecot now or in the near future (if yes what is the estimated time)?: - authenticate from LDAP, the best would be trough PAM? - use the same user with different domain. eg: lfarkas(a)bnap.hu, lfarkas(a)bppiac.hu with the same imap server? handle more domains. - use imaps and use Digest-MD5 and/or CRAM-MD5? - put a database backend under imap and store the mails in a database. - use WITHOUT local users? it's very important! most case a user never ever log into the local system and I would not like to put them into /etc/password. - do it all the above at the same time!? thanks. -- Levente http://petition.eurolinux.org/ "The only thing worse than not knowing the truth is ruining the bliss of ignorance."

2 1

[dovecot] Re: sick of me yet?
by Timo Sirainen 02 Dec '02

02 Dec '02

On Mon, 2002-12-02 at 01:37, Kyle Symonds wrote: > x login weasel(a)squeakyweasel.net ******** > x NO Authentication failed: Authentication process died Well, you should definitely see something about this in log files. Like: imap-auth: Dec 01 17:59:32 Warning: Killed with signal 11 And if it was killed with signal 11 or 6 you should also find core file in the directory where you started imap-master?

1 0

[dovecot] Sieve
by hellhound＠geek.be 01 Dec '02

01 Dec '02

Hi all, I'm using Dovecot for some months now, and I love it! I also saw that there are 'plans' to integrate Sieve support. Well, some days ago I saw the following on freshmeat: libSieve - http://libsieve.sourceforge.net/ libSieve is a standalone library pulled from CMU's implementation of their Sieve mail sorting library in the Cyrus mail server. Either shared or statically linked, libSieve will help to bring mail sorting functionality into your mail server application without the need to reinvent the wheel. As a library, it is not intended for end users expecting a ready-to-run program. Maybe this could ease the Sieve integration ? If I got some spare time I'm going to contribute some code for it myself. greets

2 1

[dovecot] Re: compiling
by Timo Sirainen 01 Dec '02

01 Dec '02

On Sun, 2002-12-01 at 22:54, Kyle Symonds wrote: > Just thought I'd pass this along. While trying to compile 0.99.4 the following happens: > > restrict-process-size.c: In function `restrict_process_size': > restrict-process-size.c:41: `RLIMIT_AS' undeclared (first use in this function) > restrict-process-size.c:41: (Each undeclared identifier is reported only once > restrict-process-size.c:41: for each function it appears in.) Thanks. I thought that would have been portable since it was in UNIX98. You could change that to RLIMIT_DATA and it should be somewhat equilevant. I'll change it in CVS so that it does both DATA and AS if it exists.

1 0

[dovecot] 0.99.4 released
by Timo Sirainen 01 Dec '02

01 Dec '02

This fixes the last weird bugs that I know of. Now just a few more missing features and 1.0 should be there :) v0.99.4 2002-12-01 Timo Sirainen <tss(a)iki.fi> - Command parser had several bugs when it didn't have enough data to parse the full command in one call, ie. network lags etc. triggered those bugs sometimes. This was the last "weird bug" I know of. - Mbox indexes got broken when updating cached fields - Fixed a few memory leaks and unneededly high memory usage while caching envelopes - Fixes to searching from message body and header - --with-ssldir didn't do anything and the default was empty

2 1

[dovecot] dovecot and pop3
by Paul C. Bryan 27 Nov '02

27 Nov '02

Dear dovecotters: I'm becoming interested in dovecot as a replacement for UW-IMAPD. Any project that claims it's the "postfix of ____ servers" deserves a looksee. If indeed I were to going to switch at some point, I'd need to replace the UW POP3 server (which is a part of the UW package). I would prefer one that actually used the dovecot IMAP server instead of going to the filesystem directly. Question 1: Anyone know of such a POP3 daemon that connects to the IMAP server. Question 2: If the answer to Q1 is "no", would anyone be interested in such a package? Yours truly, Paul C. Bryan email(a)pbryan.net

4 5

[dovecot] vpopmail - again
by Kyle Symonds 27 Nov '02

27 Nov '02

OK, dovecot compiles fine and starts up. I changed the auth_userinfo var to vpopmail, fired up imap-master and tried to login via webmail and my log spits out the following: imap-login: Nov 26 14:50:50 Error: Can't connect to imap-auth at auth: Connection Refused imap-login: Nov 26 14:50:51 Error: Can't connect to imap-auth at vpopmail: Connection Refused Any ideas? --Weasel weasel(a)squeakyweasel.net http://squeakyweasel.net

2 1

[dovecot] rpm and srpm for dovecot
by seth vidal 26 Nov '02

26 Nov '02

hi, I put an rpm and srpm for dovecot on: http://www.dulug.duke.edu/~skvidal/RPMS/ They are made under rhl 7.3 - should build on 8.x I'd bet. I added an init script to start up imap-master I've done exactly ZERO testing on these and I'd welcome some feedback, thanks. -sv

1 0

[dovecot] 0.99.3 released
by Timo Sirainen 26 Nov '02

26 Nov '02

OK, this one will be the final release for a while, I promise (or hope). Fixes mbox corruption when expunging mails from the middle of mailbox with mail_read_mmaped=no which is the default. This bug was already in 0.99.0 release. I had been using Dovecot like that for 5 days or so without noticing the bug.. Wonder if I lost any mails.

1 0

[dovecot] mbox problems
by Timo Sirainen 26 Nov '02

26 Nov '02

Strange .. I didn't think I had done anything that could break things too badly. Anyway, at least with Solaris EXPUNGE may corrupt part of the mbox file, so don't do that for now.

1 0

[dovecot] 0.99.2 released
by Timo Sirainen 26 Nov '02

26 Nov '02

Mostly compiling cleanups but also one bugfix when index wasn't exclusively locked while it was being fsck'ed - that doesn't normally happen without crashing/whatever. v0.99.2 2002-11-26 Timo Sirainen <tss(a)iki.fi> + If we have to wait for a lock longer, the client is now notified about it every 30 seconds. - Default settings still pointed to lib directory instead of the libexec directory where the binaries were actually installed - vpopmail support had to be kludged to fix a bug in vpopmail library which sometimes left extra character after the user name. - Login process crashed if master process didn't let some user login. Normally this couldn't happen without error in configuration. - select() based I/O loop wasn't working so Dovecot didn't work in eg. OSX. Also PAM authentication wasn't detected with OSX. - Didn't compile with NetBSD-current

1 0

[dovecot] 0.99.1 released
by Timo Sirainen 25 Nov '02

25 Nov '02

Nothing new, just a few compiling/configuration issues fixed. Dovecot should also be in NetBSD pkgsrc soon. Now who would want to get it into Debian? :) v0.99.1 2002-11-25 Timo Sirainen <tss(a)iki.fi> + Added doc/mkcert.sh script to easily generate yourself a self-signed certificate. Modify doc/dovecot-openssl.cnf before running it. + --with-ssldir configure option to specify default path for /etc/ssl + Added ssl_disable setting to config file - OpenSSL wasn't checked properly by configure - vpopmail authentication module didn't compile - We should install the binaries into libexec dir, not lib - doc/configuration.txt and doc/mail-storages.txt were missing

1 0

[dovecot] vpopmail support?
by Kyle Symonds 24 Nov '02

24 Nov '02

Well, I read that back in 0.98 or so vpopmail support should work so I assumed it would be enabled in 0.99 but here's what I get. gcc -DHAVE_CONFIG_H -I. -I. -I../.. -I../../src/lib -I/usr/local/vpopmail/include -g -O2 -Wall -W -g -O2 -Wall -W -c userinfo-vpopmail.c In file included from userinfo-vpopmail.c:12: /usr/local/vpopmail/include/vpopmail.h:133: syntax error before `*' *** Error code 1 Stop in /root/dovecot/src/auth. *** Error code 1 Stop in /root/dovecot/src. *** Error code 1 Stop in /root/dovecot. *** Error code 1 Stop in /root/dovecot. Someone want to throw a bone? =) --Weasel weasel(a)squeakyweasel.net http://squeakyweasel.net

2 1

[dovecot] Re: vpopmail support?
by Kyle Symonds 24 Nov '02

24 Nov '02

Oh yeah, the system's FreeBSD 4.7-RELEASE. Trying to do a qmail+vpopmail+pop3+imap setup. --Weasel weasel(a)squeakyweasel.net http://squeakyweasel.net ======= At 2002-11-24, 12:25:00 you wrote: ======= >Well, I read that back in 0.98 or so vpopmail support should work so I assumed it would be enabled in 0.99 but here's what I get. > >gcc -DHAVE_CONFIG_H -I. -I. -I../.. -I../../src/lib -I/usr/local/vpopmail/include -g -O2 -Wall -W -g -O2 -Wall -W -c userinfo-vpopmail.c >In file included from userinfo-vpopmail.c:12: >/usr/local/vpopmail/include/vpopmail.h:133: syntax error before `*' >*** Error code 1 > >Stop in /root/dovecot/src/auth. >*** Error code 1 > >Stop in /root/dovecot/src. >*** Error code 1 > >Stop in /root/dovecot. >*** Error code 1 > >Stop in /root/dovecot. > >Someone want to throw a bone? =) > >--Weasel >weasel(a)squeakyweasel.net >http://squeakyweasel.net

1 0

[dovecot] 0.99.0 released
by Timo Sirainen 24 Nov '02

24 Nov '02

I figured now would be a good time for new release. All the major changes are pretty much done now. v0.99.0 2002-11-24 Timo Sirainen <tss(a)iki.fi> + Replaced hash file with binary tree file which makes Dovecot stay fast with large mailboxes after expunging multiple mails. + Several speed improvements with SEARCH + SEARCH CHARSET support using iconv(), although case-insensitive searching is currently supported only for ASCII characters. + OpenSSL support. + Support for regenerating Diffie Hellman and RSA parameters with specified intervals. NOTE: currently doesn't work with OpenSSL. + Support for each login connection being handled in it's own process. This is the default as it's more safe especially with SSL. + mbox locking is now safe, other processes can't modify the mbox file while we're reading it. + Notify clients with "EXISTS" almost immediately after new mail is received. + Rawlog: Support for saving user connections into files - useful for debugging. + Content-Language is finally parsed correctly + Lots of smaller speed optimizations - Partial BODY[] fetches weren't working properly - BODY[section] was buggy with message/rfc822 MIME parts - STARTTLS wasn't working - \* flag was missing from PERMANENTFLAGS. - Comments inside <> mail addresses crashed. - imap-login printed UTC timestamps to logfiles - passwd-file wasn't reread the the file changed - PAM authentication was implemented wrong, which caused it to break with some PAM plugins. - Lots of smaller fixes, mostly to do with reliability

1 0

[dovecot] Seen bug?
by Simon Lindgren 13 Nov '02

13 Nov '02

Hi, I'm using Kmail and dovecot for my IMAP pleasure, and have had some problems, which are evident from the following exchange with some kmail developers. My patch to the imap protocol in KDE fixed my problem, but should dovecot be changed instead? Thank you for any insight! I've included the discussion on kmail-devel so far: [ I wrote: ] -- I've recently switched to IMAP for email (using dovecot as the server, http://dovecot.procontrol.fi/) and have a small problem: Clicking a message brings it up, but doesn't seem to mark it read on the server. I need to select 'Message -> Mark Message -> Mark Message as Read' in order for it to "stay read" when I check for new mails on the server. Is anyone else seeing this behaviour? Is this a bug, or a feature? I've assigned a shortcut key for 'Mark Message as Read' so I get by, but with a large number of messages and folders, it quickly becomes annoying. -- [ Carsten Burghardt <burghardt(a)kde.org> wrote in reply: ] -- As your imap-server is not really common you should check with ethereal the communication between kmail and your server. -- [ I wrote in reply: ] -- Thanks for the replies... snooping with ethereal, I get the following: (quoting only the data sent from kmail) When viewing a mail in kmail: UID FETCH 203 (UID RFC822) When specifically flagging it as 'read' in kmail: UID STORE 203 -FLAGS.SILENT (\SEEN \ANSWERED \FLAGGED \DRAFT) UID STORE 203 +FLAGS.SILENT (\SEEN) It would seem that my problem would be solved if kmail also sent the +FLAGS stuff when viewing a message... but I don't know if this would be according to the IMAP specification - or if the server should flag the message as 'seen' when the client does the 'fetch' ? I do have 'Mark selected message as read after 0 sec' checked - and the message is flagged in kmail as read, but without specifically marking it as read in kmail, it's still 'unread' after the next 'check mail' run. I hope I'm being clear. If you still think this is a bug with my (non standard, I agree!) IMAP server I'll try another one. -- [ I wrote another reply: ] -- I made a change to imap4.cc, and it magically works for me - I've not tested this one very much, but it seems to do the trick so far. I would be very interested if someone knowledgeable would tell me just how wrong this piece of code is, as I'm working on learning these things. --- imap4.cc Tue Oct 15 21:52:43 2002 +++ imap4.cc Tue Nov 12 01:36:05 2002 @@ -289,6 +289,11 @@ } completeQueue.removeRef (cmd); + + if (aSection.find ("ENVELOPE", 0, false) == -1) { + doCommand (imapCommand:: + clientStore (aSequence, "+FLAGS.SILENT", "\\SEEN")); + } } } -- [ Carsten Burghardt <burghardt(a)kde.org> wrote: ] -- No, everything is alright here, you should check a different server. -- [ Bo Thorsen <bo(a)sonofthor.dk> wrote: ] -- It is definately a bug in the server. The IMAP RFC specifies that a server must only once serve a file flagged as new. So your server violates this principle.

2 1

[dovecot] Re: pam + radius
by Timo Sirainen 03 Nov '02

03 Nov '02

On Thu, 2002-10-31 at 21:32, Hielke Christian Braun wrote: > It helped a bit. Now the first login to dovecot works fine. The domainpart > of my username is not changed. But after the first login, dovecot > always sents the username from the first login to the radius server even when > i login from a different client with a complete different username. OK, fixed now in CVS. I implemented PAM support pretty wrong.

1 0

[dovecot] Re: pam + radius
by Timo Sirainen 29 Oct '02

29 Oct '02

On Tue, 2002-10-29 at 06:00, Hielke Christian Braun wrote: > > You probably don't have the users in /etc/passwd file too, right? > > I have the users in the passwd and shadow files as i need that for quotas > to work. Though in the shadow file i don't have the password and only a x. > The problem must be something else. Well .. I don't know then really. Since you did get it to work by changing PAM to use shadow auth, Dovecot is doing it at least partly right. Maybe the radius PAM module requires something that Dovecot didn't do.. Looking at Courier's PAM handling, it does pam_setcred() which dovecot doesn't. You could try if doing that helps: src/auth/userinfo-pam.c, around line 169, insert between pam_authenticate() and pam_acct_mgmt(): if ((status = pam_setcred(pamh, PAM_ESTABLISH_CRED)) != PAM_SUCCESS) { if (status == PAM_ABORT) i_fatal("pam_setcred_mgmt() requested abort"); return FALSE; } > Maybe it dovecot sets a realm, which is then mistakenly used by > the pam radius module, but not by the passwd/shadow module? PAM doesn't have any support for realms AFAIK.

1 0

[dovecot] Re: pam + radius
by Timo Sirainen 29 Oct '02

29 Oct '02

On Tue, 2002-10-29 at 05:01, Hielke Christian Braun wrote: > i am trying to use dovecot with pam and radius. My users have names > in the format joe(a)somedomain.com. When i have pam configured to use > the normal passwd/shadow files it works fine. With radius it does not. > I see at the radius server that the domain part of my usernames > is always replaced with the same domain @nikojet.com. I don't think > it is a problem with the pam radius, as the same library works fine > with the solid state pop3 server. Is this a fundamental problem and > dovecot/imap does not work with usernames which have a domain part or > is it a bug? You probably don't have the users in /etc/passwd file too, right? Dovecot currently wants the users to exist there too to get their UID, GID and home directory. I'll change this later so that you could give "gid=123 uid=456 homeroot=/var/mail" options to pam auth and it'd use them for all users. Or did PAM also support getting that information in some way? I'm not sure exactly..

1 0

[dovecot] vsnprintf()
by Thomas Wouters 23 Oct '02

23 Oct '02

I think I stumbled upon a bug in the i_snprintf() function. In the case of vnsprintf() being available, it depends on vnsprintf() returning -1 when the string was longer than the passed-in limit (or it won't terminate the string.). But this isn't the C99-standardized behaviour, and newer glibc's don't do that anymore either, so you can end up with a non-terminated string. This patch should fix it, I think. Index: strfuncs.c =================================================================== RCS file: /home/cvs/dovecot/src/lib/strfuncs.c,v retrieving revision 1.14 diff -c -u -r1.14 strfuncs.c --- strfuncs.c 20 Oct 2002 03:19:10 -0000 1.14 +++ strfuncs.c 23 Oct 2002 11:19:39 -0000 @@ -401,7 +401,7 @@ va_end(args); t_pop(); - if (ret < 0) { + if (ret < 0 || ret >= max_chars) { str[max_chars-1] = '\0'; ret = strlen(str); } -- Thomas Wouters <thomas(a)xs4all.net> Hi! I'm a .signature virus! copy me into your .signature file to help me spread!

3 4

[dovecot] anonymous CVS access
by Timo Sirainen 23 Oct '02

23 Oct '02

OK, added anon-pserver: cvs -d :pserver:anonymous@dovecot.procontrol.fi:/home/cvs co dovecot

1 0

[dovecot] New mailing list: dovecot-cvs
by Timo Sirainen 23 Oct '02

23 Oct '02

Installed syncmail program what Thomas was wanting. It sends a mail of each cvs commit, including the actual changes in source. Otherwise the mailing list is read-only. Subscribing happens the same way as to dovecot list, ie. dovecot-cvs-request(a)procontrol.fi with subscribe in subject. Hmm. I think I should also separate the private/public cvs repositories running in that computer and provide anonymous pserver access..

1 0

[dovecot] Architectural questions
by Thomas Wouters 22 Oct '02

22 Oct '02

Greetings, I have some architectural questions regarding dovecot, and though I've half answered them by looking at the source, I'm also interested in hearing whether my (our) wishes and suggestions are already being considered (or can be considered, once built) for inclusion in dovecot itself. Let me first explain why I'm doing this. I work for XS4ALL, a fairly large ISP in the Netherlands. We provide a wide variety of services, including shell access, pop3, webmail, et cetera. We use Sendmail on several clusters of FreeBSD machines (loadbalanced using layer-4 ethernet switches) and several NetApp Filers (dedicated NFS servers with fail-safe disk-arrays and such) for backend. Several years ago (when we were a lot smaller) we noticed the typical use of the mailboxes included leaving much old email on the server, at least for a while, and that this is a bothersome thing when using mbox mailboxes. (The mboxes basically have to be copied over whenever the status of an email changes, leading to a lot of I/O.) We briefly played with modifying sendmail and the pop server to avoid the full copy in the common case (only status changes) by doing in-place edits of a pre-generated Status line, as well as avoid full scanning of the mbox file by creating special headers to mark the 'real' length of an email. It worked, for a while, but it wasn't going to scale very well. So we switched to maildir mailboxes for the mail spool. A modified mail.local (which we need for other reasons as well) delivers in /var/spool/mail/u/s/username, and mutt, uqwk, a modified pine and qmail's pop3 daemon read it from there. Until last week our clients could choose to have mbox inboxes, to use with 'elm' or 'mail', but we decided to discontinue that support. Our new shell servers, which are in test, don't have elm installed anymore anyway. We still have support for mbox mailboxes in a user's homedirectory though, by using procmail and such. So when we needed an IMAP server for use with our webmail (based on SquirrelMail), we were forced to go with the UW-IMAP server, with the maildir patch that's been scattered around the 'net. This worked, for a while; we also use the maildir patch with pine after all. However, the maildir patch is not very good. Not at all, even, and it only seems to work by pure chance. Pine works for the average user who does not get a lot of new mail while his pine is open or does not use procmail, and fortunately a lot of the people that do get a lot of email use mutt, which does work properly. The UW-IMAP server worked fine because SquirrelMail only uses (used) a small subset of the available functionality. But that's changing, as SquirrelMail gets actively developed, and we're also considering other IMAP-based services. But we can't switch to Courier or Cyrus because we need mbox support. And while looking for mbox patches for either of those two, I ran across dovecot. Yay! :) Dovecot is not everything we'd want, but it comes very close, and contrary to UW-IMAP both the design and the actual source code are clean, readable and logical, which means we can add the features we need and support them. What we need and want to add is fairly simple, but I've only been looking at dovecot since yesterday so I'd be happy to hear if any of it is possible, feasible, unwise or unacceptable. - First off, we need the maildir support to be 'correct' in that it does not rely on the naming of the files in the mailbox, other than the very loose specification DJB gives (doesn't contain a colon or slash and doesn't start with a dot.) The pine/UW-imap patch breaks here because it depends on the first part of the filename being time() or something else that, when sorted alphanumerically, puts new mail at the end. Our LDA does this, but procmail does not, and it shouldn't have to. - Second, we need the maildir support to be 'correct' in that it does not rely on the directory order being persistant. The NetApp Filers use btree-indexed directories, so the order of readdir() can change completely whenever a file is added or removed. The pine/uw-imap patch relies on the '.uidvalidity' file being modified whenever the maildir sort order changed, and this isn't happening. I *think*, from reading the sources, both of those are correct already. If they aren't, I'd strongly urge you to fix it, as #1 is a problem for anyone using procmail and #2 is a problem for anyone with 'indexed' directories (including such new filesystems as reiserfs, and I assume FreeBSD's new hashed directories.) - We need to avoid using fcntl(). The Netapps support it, but file-locking over NFS is very, very poorly designed and we've had too much problems of various kinds before, with fcntl. We also don't like the idea of having thousands of fcntl locks at the same time ;P Instead, we've switched to the locking method described in the Linux open(2) manpage under O_EXCL. (We call it 'dot-locking', I'm not sure where the name came from.) The actual implementation of that method is pretty simple, and I have a C version and a Python version hanging around here somewhere (the Python version is being used by GNU Mailman, last I looked.) If we're going to use dovecot, we will replace most, if not all, fcntl()s with dot-locking, the question is whether you want it contributed to dovecot :) - Every user's incoming mailbox is /var/spool/u/s/username. Other mailboxes are in /home/u/username/mail or /home/u/username/Mail (the second if the first does not exist.) We are not yet certain whether we want the inbox to be able to have subdir-mailboxes, as /var/spool and /home have different quotas and we urge people not to store their mail on /var/spool. (for one thing, it doesn't get backed-up.) We want these things to work without magical symlinks or empty files, because people _will_ delete them and cause unnecessary helpdesk calls :) Again, the question is mostly whether this is desirable in dovecot (or something enough like it to reduce local changes.) - We have over 300k mailboxes at the moment. We expect that number to keep growing. The indexer process (as described by design.txt) does not sound as a good idea in our case :) How necessary is it, really ? Especially since we do not expect more than 10% of those mailboxes to be actually used by IMAP, not even once. If disabling the indexer completely just means longer startup times for IMAP sessions, we can live with that. - The UW-IMAP maildir patch stores UID's in the indiviual filenames, using a 'U' flag. Will this interfere with dovecot ? We don't really need dovecot and UW-IMAP to share UIDs, but we would like to have an as painless transition as possible, without having to rename millions of files to remove the U flag and other flags :P It would also be nice to keep pine using the existing maildir patch, even though very few IMAP-users would use pine. - Would dovecot scale, architecturally speaking, to 500k+ active mailboxes ? The amount of hardware is not really an issue, we can add a lot of machines (off-the-shelve intel hadware) to each cluster, but if each dovecot process has to load in an index of all possible mailboxes... that would be a problem. Doing an inordinate number of file-accesses over NFS would also be a problem, but I haven't seen any indication of that in the source, yet. In case it wasn't clear yet, I'm very happy to have found dovecot. The lack of a decent mbox IMAP server has always dismayed me, let alone an mbox+maildir one :) I should also point out that even though XS4ALL is a commercial company, we would contribute our changes even if the licence didn't require it, and we want to contribute them back the way you want them, not necessarily the way it's easiest for us. We have a lot of experience with opensource software, as a simple google on my name should indicate ;P Regards, -- Thomas Wouters <thomas(a)xs4all.net> Hi! I'm a .signature virus! copy me into your .signature file to help me spread!

3 24

[dovecot] Re: Architectural questions
by Thomas Wouters 21 Oct '02

21 Oct '02

On Sat, Oct 19, 2002 at 12:42:25PM -0400, Charlie Brady wrote: > > So when we needed an IMAP server for use with our webmail (based on > > SquirrelMail), we were forced to go with the UW-IMAP server, with the > > maildir patch that's been scattered around the 'net. This worked, for a > > while; we also use the maildir patch with pine after all. However, the > > maildir patch is not very good. Not at all, even, and it only seems to > > work by pure chance. > The best one I've found is the patch last modified AFAICT by Miquel van > Smoorenburg, which has maildir filenames like: > time.pid.host,U=xxx,W=yyy:2,flags We use two different patches, both of which have a bit of Mike in them. One is for the IMAP server, which is an old version ('uw-imap-2000' or something like that comes to mind, but it came from the pine 4.10 source) from before the mailbox->append prototype changed (but with Mike's bilennium-patch.) A big problem with later patches was that the append method changed in the pine source, but not in the maildir patch. We considered using a newer uw-imap but decided that the current one works good enough ;P For pine we currently use the patch that comes with Debian's 'pine-tracker' package (which is an installer for pine with patches, since you aren't allowed to distributed modified binaries.) This patch also has some Mike in it, but I'm not sure howmuch, as at least parts of it seem to be backed out later. This patch works okay except for the two problems I noted in my original mail: it depends on directory order not to change except when '.uidvalidity' gets touched, and it depends on alphanumerical sort order of files matching chronological (or at least uid-based, which should be the same) sort order. The latter breaks with (standard) procmail, the former occasionally with btree and (presumably) hashed directory indices. > The storage of RFC822.SIZE, aka the on-the-wire size, in the filename > makes a very big difference to performance. That's interesting. I'll keep that in mind for when we begin to see performance issues with UW-IMAP. (I'm hoping I never have to look at the pine source again, though.) > But even this patch (from, e.g. > http://www.star.le.ac.uk/~tjg/misc/uw_imap-2001a_maildir-02.patch) has a > number of bugs. I've fixed a few of them. You can find a source RPM at > ftp://ftp.e-smith.org/pub/e-smith/dev/5.6dev/SRPMS/. The fixes are: <snip fixes> I couldn't find the source RPM for pine or (uw-)imap in that directory, but it doesn't sound like your changes solve our fundamental problems. It's not that big a deal, I think we've decided internally (I know _I_ have :) that we can't offer real IMAP services based on UW-IMAP; we'd sooner go for Cyrus or Courier, even if it does mean disallowing mboxes with IMAP. But dovecot is an even better alternative, once it has all the features we need :) -- Thomas Wouters <thomas(a)xs4all.net> Hi! I'm a .signature virus! copy me into your .signature file to help me spread!

1 0

[dovecot] observations/qestions of mbox concurrency ability (Yay!) on current CVS
by Ian R. Justman 20 Oct '02

20 Oct '02

Hi, all. Just been testing out the latest "CVS" (in quotes because I'm rsyncing the source tree) versions of Dovecot lately. Tested having Pine on the machine on which Dovecot was running, talking IMAP, as well as another Pine instance, this time from my Windows machine over the wire. Things seem to be working wonderfully. Deleted a message using one instance, then refreshed the list on the other. *poof* Gone. Though I'm seeing periodic "IMAP protocol error" messages in Pine, but they don't seem to be affecting the software's operation that I can see. Anything in particular I should be on the lookout for? Otherwise, you just made my day. Correction; week. :D --Ian.

2 1

[dovecot] Re: still problems gettin it to work
by Korbinian Riedhammer 19 Oct '02

19 Oct '02

well finally it was my own stupidness! i just forgot to set some correct permissions, now everythings fine! thx anyway korbinian

1 0

[dovecot] Re: still problems gettin it to work
by Korbinian Riedhammer 19 Oct '02

19 Oct '02

yeah, the nasty error msgs are gone :) well next question. where looks the dovcot imapd for the mail dir? /var/mail or the homedir? 'cause i saved my Maildir in /home/user

2 1

[dovecot] Re: still problems gettin it to work
by Korbinian Riedhammer 19 Oct '02

19 Oct '02

well i didn't know what to change, cause u wrote that this change u did is pretty useless rinning the prog as root, what i do. next thing that i dont have any idea about cvs (beside knowing its meaning) and dont hav it installed yet.

2 1

[dovecot] still problems gettin it to work
by Korbinian Riedhammer 19 Oct '02

19 Oct '02

i checked all my options again. could it be, that it is a problem with my compiler? does dovecot support gcc3.2 with glibc 2.2.5? korbinian

2 1

[dovecot] still problems getting it to work
by Korbinian Riedhammer 15 Oct '02

15 Oct '02

hi all, after havong some other trouble with my server i finally managed to recompile and install dovecot. installed it in /usr/local (the dafault). below u see a dump of my config file. i want to use "normal" shadow passwords for authentification. i adjustet the pathes from /usr/ to /usr/local/. when i login with outlook express 4 example i get the error: unsupported authentification method. (my system isn't configured for shadow md5). in the error log i get the the /dev/urandom is needed but not found, well but i have it :) maybe a chroot setting? thx bini imap_port = 143 #imaps_port = 993 imap_listen = #imaps_listen = #ssl_cert_file = /etc/ssl/certs/imapd.pem #ssl_key_file = /etc/ssl/private/imapd.pem disable_plaintext_auth = no log_path = /var/log/imapd.log log_timestamp = %d %H:%M:%S login_executable = /usr/local/lib/dovecot/imap-login login_user = imapd login_dir = /var/run/dovecot/login login_chroot = yes login_processes_count = 1 max_logging_users = 256 imap_executable = /usr/local/lib/dovecot/imap max_imap_processes = 1024 first_valid_uid = 1000 #last_valid_uid = 0 first_valid_gid = 101 last_valid_gid = 101 valid_chroot_dirs = /var/run/dovecot maildir_copy_with_hardlinks = no maildir_check_content_changes = no overwrite_incompatible_index = yes umask = 0077 auth = default auth_methods = plain #auth_realms = auth_userinfo = shadow auth_executable = /usr/local/lib/dovecot/imap-auth auth_user = root auth_chroot = /var/run/dovecot auth_count = 1 #auth = digest_md5 #auth_methods = digest-md5 #auth_realms = #auth_userinfo = passwd-file /etc/passwd.imap #auth_user = imapauth #auth_chroot = /var/run/dovecot/auth

2 2

[dovecot] More documentation
by Timo Sirainen 15 Oct '02

15 Oct '02

I just wrote a bit of documentation. Probably not very well organized, improvement suggestions welcome :) http://dovecot.procontrol.fi/doc/INSTALL http://dovecot.procontrol.fi/doc/configuration.txt http://dovecot.procontrol.fi/doc/mail-storages.txt Those are also in the main dovecot.procontrol.fi web page. They also talk about a few features not yet in CVS..

1 0

[dovecot] replacing Courier imapd
by Sean Rima 12 Oct '02

12 Oct '02

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi folks, I currently use courier imapd, exim and ldap on my mail box. There are no users on this box, all info is taken from the ldap server. I note that dovecot does not use ldap as a backend, but curious if this in on the cards, or even mysql backend. Sean - -- Sean Rima http://www.tcob1.net Linux User: 231986 Jabber: tcobone(a)jabber.org THE VIEWS EXPRESSED HERE ARE NOT NECESSARILY THOSE OF MY WIFE. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.0 (GNU/Linux) Comment: Use GPG for Secure Mail iD8DBQE9qEs4HMnSWn2nApQRAn22AJ4xdGWfpxAuY8dLDuHM/XUAXms0mwCfZJzk ZD8cTK98j7f7CGcu1OENJXI= =BS5M -----END PGP SIGNATURE-----

2 1

[dovecot] auth problem
by Korbinian Riedhammer 12 Oct '02

12 Oct '02

hi, im facing this problem: Fatal: can't listen in UNIX socket /var/rin/dovecot/login/ /usr/lib/dovecot/imap-login: No such file or directory Errror: child xxxxx (auth) returned error 98 any idea? - bini

2 1

[dovecot] Benchmarks
by Timo Sirainen 10 Oct '02

10 Oct '02

Just tried Dovecot with 85k mails from Linux kernel mailing list, total of 357MB. I mostly wanted to see if the new binary tree file works well. And it does :) Nothing gets slowed down after deleting messages all around the mailbox. I tried several things with Dovecot, UW-IMAPd and Courier. You'll see that Dovecot is faster in everything else except raw I/O which is a bit strange, have to look why. I think the most important thing anyway is the time spent opening mailbox. Clients are doing "STATUS mailbox (UNSEEN)" very often and that has to be fast. With Dovecot it's so small that I didn't even bother adding it to the benchmarks, with UW-IMAPd it's 16 seconds, with courier 2 seconds. Full results can be found at http://dovecot.procontrol.fi/dovecot-benchmark.txt

1 3

[dovecot] 0.98.4 released
by Timo Sirainen 05 Oct '02

05 Oct '02

v0.99 will be next, having the new great binary tree code which should make huge mailboxes possible. With smaller mailboxes I think it still makes it better than the old code, even while it is slower in some cases (hash lookups are faster than btree search in optimal cases). v0.98.4 2002-10-06 Timo Sirainen <tss(a)iki.fi> * Just a final release before replacing hash file with a binary tree. - When fetching messages larger than 256k, sometimes Dovecot missed to send CR causing corrupted data at end of message and possibly complete failure depending on IMAP client. - Fetching BODY or BODYSTRUCTURE for message having content-type of message/rfc822 didn't correctly add () around the envelope data. - Several fixes to make it compile with HP/UX ANSI C compiler. Also fixed several warnings it showed up.

1 0

[dovecot] 0.98.3 released.
by Timo Sirainen 30 Sep '02

30 Sep '02

v0.98.3 2002-10-01 Timo Sirainen <tss(a)iki.fi> * Sorry, just noticed a very stupid bug which caused evolution 1.2 beta to crash. I always thought it was just evolution's fault :) - Several fields in BODY / BODYSTRUCTURE replies weren't quoted

1 0

[dovecot] 0.98.2 released
by Timo Sirainen 30 Sep '02

30 Sep '02

Lets see if I fixed all the nasty bugs now. v0.98.2 2002-09-30 Timo Sirainen <tss(a)iki.fi> + --with-file-offset-size=32 can now be used to select 32bit file offsets. Using them should be a bit faster and take a bit less disk and memory (also needed to compile Dovecot successfully with TinyCC). + maildir_copy_with_hardlinks option works now + Check new mail and notify about it to client also after commands which don't allow full syncing (FETCH, STORE, SEARCH). Also always send RECENT after EXISTS notify. + If we're out of disk space while opening mailbox, notify about it with ALERT. - STORE and SEARCH didn't handle properly message sequence numbers when some in the middle were externally deleted - SEARCH: Only first search condition was checked. - mbox: Message flags given to APPEND were ignored. - mbox: index was corrupted when changing flags for multipart MIME messages - Out of disk space-handling wasn't working properly with .customflags file - if auth processes were killed, login processes weren't reconnecting to them

1 0

[dovecot] 0.98.1 released
by Timo Sirainen 24 Sep '02

24 Sep '02

Guess I should have waited one more day before releasing 0.98 :) This fixes a few mbox problems and should finally make it safe to use. Also fixes a bug of not allowing to save mail larger than 8kB.

1 0

[dovecot] 0.98 released
by Timo Sirainen 23 Sep '02

23 Sep '02

0.98 released. This release includes LOTS of bugfixes after almost 4 weeks of actual use. We've mostly tested with Outlook 2000, Outlook Express 6 and Evolution 1.0.8. I haven't heard of a single bug in maildir for several days, and mbox worked quite well first time today :) New features include vpopmail authentication, ability to run properly when there's no disk space left to allow user to delete mail, and full support for mbox. v0.98 2002-09-23 Timo Sirainen <tss(a)iki.fi> + mbox support is finally working. There's still some reliability fixes left but overall it should be quite usable. + vpopmail authentication support + We should be able to deal with "out of diskspace/quota" conditions properly, by keeping the indexes in memory and allowing user to delete mails to get more space. + Several speed enhancements + New configuration file option: overwrite_incompatible_index to force using ".imap.index" file, overwriting it if it isn't compatible - Handle invalid message headers reliably - Tons of bugfixes and code cleanups everywhere

1 0

[dovecot] vpopmail authentication
by Timo Sirainen 20 Sep '02

20 Sep '02

CVS has now support for vpopmail authentication. .c file compiles, but I'm not sure if I did the other checks properly and if it actually works :) If someone here is using it, could you test it? At least to see if configure detects it and if it compiles/links. BTW. I think maildir support is now working quite well, 0.98 isn't far away.

1 1

[dovecot] Problems with it
by SvR Marty 16 Sep '02

16 Sep '02

i've install it, used the example config and started tryed to access my mailbox via Outlook Express here's the syslog: Sep 14 22:42:17 p133 imap-login: Logged in. [192.168.1.8] Sep 15 00:42:17 p133 imap(svrmarty): MAIL environment missing and autodetection failed (home /home/svrmarty) Sep 15 00:42:17 p133 imap-master: child 20960 (imap) returned error 98 Sep 14 22:42:19 p133 imap-login: Logged in. [192.168.1.8] Sep 15 00:42:19 p133 imap(svrmarty): MAIL environment missing and autodetection failed (home /home/svrmarty) Sep 15 00:42:19 p133 imap-master: child 20961 (imap) returned error 98 it fails and i don't see any message

2 3

[dovecot] v0.97 released
by Timo Sirainen 29 Aug '02

29 Aug '02

This is a major cleanup release. My near future goal is to make it impossible to crash Dovecot no matter what you did. This release also adds support for files larger than 2GB with Linux and Solaris. Also mbox support seems to work quite well now, except EXPUNGE and STORE are still not implemented. The "impossible to crash" should already be quite true, at least when it comes to index files. You can try to corrupt indexes in any way you want, and Dovecot should not crash. There's one exception to this: modifying the files while dovecot is reading them may crash it, this is too difficult to fix as long as shared memory maps are used, and I don't see much point in it anyway. I mostly want dovecot to survive corrupted files, not intentional crashing :) This release is the first I'd almost like to call beta-quality. But not quite. It still lacks testing and several features, but it's very close :) Changelog: v0.97 2002-08-29 Timo Sirainen <tss(a)iki.fi> + Large mails are handled in 256kB blocks, so mail size no longer has hardly any effect on memory usage + 64bit file offsets are used if supported by system. This means Dovecot is fully capable of handling >2G mails in those systems. With 32bit offsets >2G mails may not behave too well, but should not crash either. + I fixed lots of potential integer overflows. This should make us fully crash-free no matter what happens (index file corruption mostly). I didn't verify everything too carefully yet, so more auditing is still needed before we fully reach that goal. + Implemented several missing tasks / optimizations to index handling. It should now stay fast after longer usage periods. + New configuration file options: log_path, log_timestamp, imaps_listen + "Critical errors" are now hidden from users, ie. any error message that is not a direct reply to user error is written into log file and user gets only "Internal error [timestamp]". + Nonblocking SSL handshaking + Lots of code cleanups - Lots of mbox fixes, it seems to be somewhat reliable now - Year in Date-field was parsed wrong - Appending mail to mbox didn't work right - Always verify that mailbox names are valid (especially they shouldn't contain "../")

1 0

[dovecot] vpopmail authentication support
by Eero Volotinen 26 Aug '02

26 Aug '02

is nice feature to get soon if possible? -- Eero

2 1

[dovecot] status update / cvs repository
by Timo Sirainen 22 Aug '02

22 Aug '02

Past few weeks went mostly while rewriting small part of code. It really wouldn't have needed to take that long, but I always got really tired after just looking at that code for a few seconds :) Anyway, now messages are parsed in 256kB blocks (maybe I should make it configurable), so large messages don't eat all memory anymore. Maildir support seems to work with the new code, though I haven't tested it too well yet. mbox is currently broken. If you want to test it, dovecot's CVS is available with rsync. I don't think I'll bother setting up pserver since that CVS has also other sources that aren't public. With rsync you'd do it something like: # initialize new cvs repository (do it just once) cvs -d ~/cvs init # update cvs repository rsync -avz --delete dovecot.procontrol.fi::dovecotcvs ~/cvs/dovecot # checkout the sources from your cvs repository cd ~/src cvs -d ~/cvs checkout dovecot

1 0

[dovecot] SELECT
by marcelo＠carpa.ciagri.usp.br 09 Aug '02

09 Aug '02

Hi, all. Thanks Timo for answering my previous post. It's starting fine now :) I must be doing something wrong again but I can't connect from any imap client. If I telnet to the server I get: $ telnet carpa 11143 Trying 143.107.209.25... Connected to carpa.ciagri.usp.br. Escape character is '^]'. * OK dovecot ready. a001 login marcelo ##### a001 OK Logged in. a002 select INBOX a002 NO Broken INBOX: Permission denied a003 select "" * FLAGS (\Answered \Flagged \Deleted \Seen \Draft \Recent) * OK [PERMANENTFLAGS (\Answered \Flagged \Deleted \Seen \Draft)] Flags permitted. * 246 EXISTS * 246 RECENT * OK [UNSEEN 1] First unseen. * OK [UIDVALIDITY 1028760751] UIDs valid a003 OK [READ-WRITE] Select completed. a004 close a004 OK Close completed. a005 logout * BYE Logging out a005 OK Logout completed. Connection closed by foreign host. "INBOX" seems not be a valid mailbox name to Dovecot but it works with others servers (courier, at least). The server uses Maildirs and runs qmail and courier (by now). Thanks.

2 6

[dovecot] v0.96 released
by Timo Sirainen 08 Aug '02

08 Aug '02

This release was actually tested with reading my inbox (500+ messages, mbox, Solaris 8) using Outlook and Evolution v0.96 2002-08-08 Timo Sirainen <tss(a)iki.fi> * Changed to LGPL v2.1 license + STARTTLS support and optional disabling of plaintext authentication (LOGINDISABLED capability) + Support for custom message flags, each folder can have 26 different. + New configuration file options: imap_listen, max_logging_users, max_imap_processes + You can specify config file location to imap-master with -c <path> + All IMAP processes can now write to specified log file instead of syslog. Either do this by setting IMAP_LOGFILE environment, or give -l <path> parameter to imap-master. + Some cleanups to remove warnings with BSDs + Changed all %s .. strerror(errno) -> %m + Rewritten memory pool code - imap-master didn't close all the fds for executed processes - iobuffer code was buggy and caused the connection to terminate sometimes - make install overwrote the existing dovecot.conf file, so it's now named as dovecot-example.conf

1 0

[dovecot] starting
by marcelo＠carpa.ciagri.usp.br 07 Aug '02

07 Aug '02

Hi. Sorry for the basic question but... how do I start the server? From inetd or in standalone mode (which binary)? Thanks

2 2

[dovecot] mbox support
by Marcus Rueckert 07 Aug '02

07 Aug '02

hi could you explain the following sentence from the readme.txt: "mbox support is available but currently it relies a little bit on good luck, ..." what kind of luck do i need? why do you think the mbox support isnt this reliable? Marcus Rückert -- irssi - the client of the smart and beautiful people

2 1

[dovecot] spam / updates
by Timo Sirainen 06 Aug '02

06 Aug '02

I guess I underestimated the spammers :) This list is subscribers-only now. As for dovecot, I've been cleaning the code and probably will continue with that some time. I was also thinking about moving the authentication code into separate (SASL) library which could then be plugged into other software, such as postfix.

1 0

[dovecot] I have visited DOVECOT.PROCONTROL.FI and noticed that ...
by Vanessa Lintner 06 Aug '02

06 Aug '02

1 0

[dovecot] DOVECOT.PROCONTROL.FI
by Sarah Williams 05 Aug '02

05 Aug '02

1 0

[dovecot] v0.95 released
by Timo Sirainen 31 Jul '02

31 Jul '02

v0.95 2002-07-31 Timo Sirainen <tss(a)iki.fi> + Initial SSL support using GNU TLS, tested with v0.5.1. TLS support is still missing. + Digest-MD5 authentication method + passwd-file authentication backend + Code cleanups - Found several bugs from mempool and ioloop code, now we should be stable? :) - A few corrections for long header field handling

1 0

[dovecot] Dovecot 0.93 released
by Timo Sirainen 29 Jul '02

29 Jul '02

First alpha quality release, everything critical is now implemented. From now on it's mostly stabilization and optimization. Features that can't break existing code could still be added, especially SSL and authentication stuff.

1 0

[dovecot] first test mail
by Timo Sirainen 23 Jul '02

23 Jul '02

lets see if it works

1 0