- dovecot - dovecot.org

Re: [Dovecot] force ciphers order for clients
by Reindl Harald 14 Aug '13

14 Aug '13

Am 14.08.2013 22:04, schrieb Robert Schetterer: > Am 14.08.2013 21:30, schrieb Reindl Harald: >> Am 14.08.2013 21:19, schrieb Robert Schetterer: >>>>> thx Harald, upgrading openssl to 1.x and using dove 2.2.5 is no option >>>>> at my setup lucid ubuntu yeter >>>> >>>> so you can practically forget it >>> >>> perhaps true forever, as long old clients are around, cause the server >>> can only workaround them >> >> not absolutely >> >> playing around with the setings below and https://www.ssllabs.com/ssltest/ >> turned out that the order is what counts, and that is really tricky >> >> i played around 5 hours with this absoluetly crap > > that sounds good, so you allready did many real world tests yeah and the bad is that it prove *currently* it is imposible to have perfect forward secrecy for most real world clients without open other vectors leading to fall back to a yellow B really sad is that playing around turned out how hard it is to force different clients at the same time to a good cipher and how one change in the order refelcts the overall result and facing this: "ssllabs" simulates negotiation of real clients (skipped in the screenshot) but we are missing the same for mailservers and thats why my conclusion is that we are hopeless as admins and can only offer things but not do much in case of clients using them __________________________ attached the current results for our webservers the only positive from the current resullt is that the sever supports ciphers for "Perfect Forward Secrecy" and the negative that it is only theory, so i stay at this config and say "dear browser vendors, i support it so use it with your damned client" because i can hardly use a config which get a yellow CVSS on security-audits to support FS for you" well, i could reven aise up "key exchange" to 90/95 but after that "FS" would not be listed at all the real sad thing is that the "FS" you see is not used by current clients which mostly use RC4 and if you add !MEDIUM the most start using FS-ciphers but are vulerable by BEAST-attack which let you fall down to grade B if i add !MEDIUM to dovecot Thunderbird does no longer connect at all

1 1

[Dovecot] weird situation with pop3/imap proxy and postfix authentication
by Leonardo Rodrigues 14 Aug '13

14 Aug '13

Hello dovecot mailing list, I have a server running postfix and dovecot. I havea configuration on dovecot that allows me to provide imap4/pop3 messages for local hosted users as well as for proxied users on other servers. Basically, i have a simple MySQL table (imapproxy) with two fields, 'domain' and 'host'. My password_query isa 'UNION' query, exactly like: password_query=select endereco as user, password, '/var/spool/mail/%u' as userdb_home, 'maildir:/var/spool/mail/%u' as userdb_mail, 8 as userdb_uid, 12 as userdb_gid, concat('*:storage=', quota) as userdb_quota_rule, 'Trash:storage=+100M' as userdb_quota_rule2, 'Y' as proxy_maybe, '10.252.38.2' as host from emails where endereco = '%u' and ativa = '1' UNION select NULL as user, '%w' as password, NULL as userdb_home, NULL as userdb_mail, NULL as userdb_uid, NULL as userdb_gid, NULL as userdb_quota_rule, NULL as userdb_quota_rule2, 'Y' as proxy_maybe, imapproxy.host as host from imapproxy where imapproxy.dominio = '%d' the 10.252.38.2 address, on the query, is my local server when this query received a local user, from a domain that is NOT listed on the imapproxy table, results are like: *************************** 1. row *************************** user: localuser(a)domain.com.br password: (SSHA256 encrypted password) userdb_home: /var/spool/mail/localuser(a)domain.com.br userdb_mail: maildir:/var/spool/mail/localuser@domain.com.br userdb_uid: 8 userdb_gid: 12 userdb_quota_rule: *:storage=51200 userdb_quota_rule2: Trash:storage=+100M proxy_maybe: Y host: 10.252.38.2 when it receives a proxied domain, results are: *************************** 1. row *************************** user: NULL password: password userdb_home: NULL userdb_mail: NULL userdb_uid: NULL userdb_gid: NULL userdb_quota_rule: NULL userdb_quota_rule2: NULL proxy_maybe: Y host: 10.254.116.9 This is working just fine for IMAP4 and POP3 proxying. Local users (which domains are NOT listed on imapproxy table) can successfully login to their accountsas well as users from domains listed on imapproxy table can successfully login to their accounts. On SMTP authentication, tough, things are not so fine. SMTP authentication is provided by dovecot to postfix: [root@correio dovecot]# postconf mail_version mail_version = 2.7.1 [root@correio dovecot]# smtpd_sasl_auth_enable = yes smtpd_sasl_authenticated_header = yes smtpd_sasl_path = /var/spool/postfix/private/auth smtpd_sasl_security_options = noanonymous smtpd_sasl_type = dovecot service auth is defined on dovecot confs as: service auth { unix_listener auth-userdb { mode = 0600 user = mail group = mail } # Postfix smtp-auth unix_listener /var/spool/postfix/private/auth { mode = 0660 user = postfix group = postfix } } and it seems to be allowing ANYuser on any domain listed on the imapproxy table domains to login, even if the user does not exists or provides wrong password. In fact, it seems dovecot returns OK to postfix even without trying to contact the assigned server to that domain, as i cannot find any password-failed-specific log to that user on the specific server. Example: (a proxied domain) [root@correio dovecot]# telnet mail.proxieddomain.com.br 110 Trying 10.254.116.9... Connected to mail.proxieddomain.com.br (10.254.116.9). Escape character is '^]'. +OK Dovecot ready. user teste(a)proxieddomain.com.br +OK pass password -ERR Authentication failed. (i can successfully find this auth trial and fail on 10.254.116.9 logs) but on SMTP authentication, i have: [root@correio dovecot]# perl -MMIME::Base64 -e \ 'print encode_base64("teste\@proxieddomain.com.br\0teste\@proxieddomain.com.br\0password");' xxxxxxxxx(not the real encoded pass)xxxxxxxxxxxxxxxx= [root@correio dovecot]# [root@correio dovecot]# telnet localhost 587 Trying 127.0.0.1... Connected to localhost.localdomain (127.0.0.1). Escape character is '^]'. 220 mail.domain.com.br ESMTP EHLO test 250-mail.domain.com.br [ ... ] AUTH PLAIN (encoded string returned by perl encode_base64) 235 2.7.0 Authentication successful (and i cannot even find any authentication log, fail or success, on the specific server for proxieddomain.com.br) dovecot version is: [root@correio dovecot]# dovecot --version 2.2.2 [root@correio dovecot]# what am i doing wrong here ? How to have dovecot to really check users before giving OK to postfix on SMTP authentications ? Thanks for any hints ! -- Atenciosamente / Sincerily, Leonardo Rodrigues Solutti Tecnologia http://www.solutti.com.br Minha armadilha de SPAM, NÃO mandem email gertrudes(a)solutti.com.br My SPAMTRAP, do not email it

1 0

[Dovecot] Patch to log the cipher suite used for TLS
by Matthias Scheler 14 Aug '13

14 Aug '13

Hello, the attached patch for Dovecot 2.2.4 improves the logging to include information about the cipher suite used for a TLS connection. Here is an example log line: Aug 13 21:49:55 colwyn dovecot: imap-login: Login: user=<tron>, method=CRAM-MD5, rip=2001:8b0:114:1::2, lip=2001:8b0:114:1::2, mpid=10567, TLS=<TLSv1 with cipher DHE-RSA-AES256-SHA (256/256 bits)>, session=<ZkEhYtrjSgAgAQiwARQAAQAAAAAAAAAC> This will e.g. allow you to find out that mobile phones use rather week cipher suites (128bit keys, no PFS). There is also something else I noticed. If I switch "mutt" (which generated the above log line) from using IMAP on port 143 and "STARTTLS" to use IMAPS on port 993 I get TLS 1.2: Aug 14 07:44:59 colwyn dovecot: imap-login: Login: user=<tron>, method=CRAM-MD5, rip=2001:8b0:114:1::2, lip=2001:8b0:114:1::2, mpid=1156, TLS=<TLSv1.2 with cipher DHE-RSA-AES256-GCM-SHA384 (256/256 bits)>, session=<0js/suLj9gAgAQiwARQAAQAAAAAAAAAC> Not sure why TLS 1.2 is only used in this case. It might be "mutt" doing that. Kind regards -- Matthias Scheler http://zhadum.org.uk/

2 2

[Dovecot] SA54438
by Timo Sirainen 14 Aug '13

14 Aug '13

http://secunia.com/advisories/54438/ Since I already got 3 private mails about this, here's the same reply for everyone (actually updated, now that I looked at the code): This was a v2.2-only bug. And it isn't really a DoS.. It only caused the one pop3 process to crash in assert, which was handling only the connection that had already disconnected. (Unless you were running a non-recommended configuration with multiple clients per process.) So the only problem it caused was that Dovecot logged an assert error and maybe wrote a core dump.

3 2

[Dovecot] Dovecot security
by Jay Khashan 14 Aug '13

14 Aug '13

Hi, THIS IS URGENT I have Debian Linux machine which I installed as a mail server with postfix, and dovecot. my mail server is setup to use SMTP relay. I currently have ports 143, 995, 25 & SSMTP ports open. in the last few days I have been under attack where email is being sent to fake email address for example xxx(a)evg-mail.org which does not exist in the mysql db. I need to figure out and lock down dovecot, because I believe the attack is some kind of virus /spyware. I need to know what statement in dovecot.conf or main.cf (postfix) I can modify to lock it down. Also open to install software to combat this kind of attack. Let me know what configuration files, info do you need to help out Many Thanks ~Jay

4 3

[Dovecot] HG changes affecting received headers
by Thomas Leuxner 13 Aug '13

13 Aug '13

Let me say this is a rather cosmetic issue, but it appears with the latest commits (around 2.2.5 release) the scheme of 'Received' headers has changed for LMTP: 1) Inet socket: Return-Path: <dfn-adv-bounces(a)dfn-cert.de> Delivered-To: <tlx(a)leuxner.net> Received: from spectre.leuxner.net ([188.138.0.199]) by spectre.leuxner.net (Dovecot) with LMTP id 8AkXDF5cA1LvDgAAZ53dLw for <tlx(a)leuxner.net>; Thu, 08 Aug 2013 10:52:46 +0200 2) UNIX socket: Return-Path: <dfn-adv-bounces(a)dfn-cert.de> Delivered-To: <tlx(a)leuxner.net> Received: from spectre.leuxner.net ([]) by spectre.leuxner.net (Dovecot) with LMTP id q8WuGflcA1I3DwAAZ53dLw for <tlx(a)leuxner.net>; Thu, 08 Aug 2013 10:55:21 +0200 3) Old (Pre 2.2.5) build, UNIX socket: Return-Path: <dfn-adv-bounces(a)dfn-cert.de> Delivered-To: <tlx(a)leuxner.net> Received: from spectre.leuxner.net by spectre.leuxner.net (Dovecot) with LMTP id 8NiKKX0h+lFRIAAAZ53dLw for <tlx(a)leuxner.net>; Thu, 01 Aug 2013 10:51:09 +0200 While it probably should resolve the FQDN in 1) (Postfix does), not sure what it should do with a UNIX socket in 2). Previously as shown in 3) it had none of it... Thomas

2 5

[Dovecot] fail2ban
by Aldo Reset 13 Aug '13

13 Aug '13

hi dovecot filter for fail2ban do not match: dovecot: pop3-login: Aborted login (tried to use disallowed plaintext auth): user=<>, rip=67 dovecot filter: failregex = (?: pop3-login|imap-login): (?:Authentication failure|Aborted login \(auth failed|Aborted login \(tried to use disabled|Disconnected \(auth failed).*rip=(?P<host>\S*),.* bst regards.

2 2

[Dovecot] Can't take user info from an alternate file
by dave＠661.org 12 Aug '13

12 Aug '13

I'm positive I did everything right to get Dovecot to take usernames and passwords from /etc/dovecot/users, but it still goes for /etc/passwd and /etc/shadow. The format of /etc/dovecot/users is "alice:{PLAIN}plaintextpassword" Here's my "doveconf -n": # 2.0.19: /etc/dovecot/dovecot.conf # OS: Linux 3.2.0-51-virtual x86_64 Ubuntu 12.04.2 LTS auth_debug = yes auth_verbose = yes auth_verbose_passwords = plain hostname = papasmurf.foobar.com listen = * mbox_write_locks = fcntl passdb { args = scheme=PLAIN-MD5 username_format=%n /etc/dovecot/users driver = passwd-file } plugin { sieve = ~/.dovecot.sieve sieve_dir = ~/sieve } service auth { unix_listener /var/spool/postfix/private/auth { group = postfix mode = 0664 user = postfix } } ssl_cert = </etc/ssl/certs/dovecot.pem ssl_key = </etc/ssl/private/dovecot.pem userdb { args = username_format=%n /etc/dovecot/users driver = passwd-file } I'm using Ubuntu Precise and version 2.0.19 of Dovecot. -- David Griffith dave(a)661.org

2 5

[Dovecot] Disconnected (no auth attempts)
by Eric Broch 12 Aug '13

12 Aug '13

Hello list, I have a user who is not able to 'get' email using the 'Get Mail' option in his Thunderbird Client. The error on the server is the following: [Dovecot] dovecot: imap-login: Disconnected (no auth attempts) : rip 192.168.7.7, lip 192.168.7.12, TLS This user is able to receive mail on his phone, however. What does this error mean? Eric <http://www.dovecot.org/list/dovecot/2012-January/062988.html>

2 1

Re: [Dovecot] Please HELP: how to delete all messages older than X days
by Răzvan Sandu 12 Aug '13

12 Aug '13

Pe 7 Aug 2013 11:35, Timo Sirainen a scris: >> Thank you, but doveadm expunge will ask for the mailbox name: >> >> [root@mail1 ~]# doveadm expunge -u john.doe(a)example.com ON >> 2013-08-07 doveadm(root): Fatal: expunge: To avoid accidents, >> search query must contain MAILBOX in all search branches > > Add: mailbox '*' Thank you, it works! May I use the same wildcard syntax ('*') when configuring the expire plugin? Something like: mail_plugins = $mail_plugins expire plugin { expire = * } or plugin { expire = '*' } ? Best regards, Răzvan

3 2